Sales order doc and item fields in customer line item report(FBL5N)

Hi All,
We have some billing documents and the accounting docs are created as well. However, in the FBL5N report, we are not able to display the sales order doc and item info even though the columns are avaliable in the layout.
Anyone can help?
Thanks,
Teo

Hiya,
You said you had the Order/Sales Doc field on the layout already.
Have you ever been able to view the Order? All I can view is the Billing Doc, and I would think that is logical, since the Order is not the immediately prceeding document for the Accounting Doc. The Accounting Doc is created off the Billing Doc and that is what is updated in BSEG. The Sales Order is not updated in BSEG (I haven't seen that happen).
In the event of a GR into stock posting, the Product Cost Collector or PO is the immediately preceeding document and hence updated in BSEG.
Cheers.

Similar Messages

Open field for customer line item

Hi Guru
I have some problem about open field for customer line item post with posting key 09 and special GL , I open field at posting key 09 but the field still hidden . How I can open field for used . Thank you

Dear,
Use transaction FBL5N and select Special G/L Transactions only and execute.....here bring posting key and filter the posting with 09.
REgards,
Chintan Joshi

Assignment Field In Customer Line Item While Credit Note - SD

When Invoice is been Generated through SD , assignment field in Customer Line item is getting SD Invoice number.
But while Generating Credit Note through SD , it is taking Customer
Account number in teh same field. What could be the reason ?
We need Credit memo number in the said field.
thanks in advance.

Visu
These configurations come from the copy controls. In the Copy controls you need to assign the correct requirements, allocation number and the reference number. For the copy controls for your crredit memo document, you need to change it similar to your billing document settings. The transaction code for this is VTFA and VTFL. Hope this helps.
I found a similar thread for your reference in the SDN.
Assignment Field - Accounting Document
Let me know if you need anything else on the same.
Karthik

Assignment Field on Customer Line Items

The customer line items (FBL5N) are sorted by assignment number which is 4 digit. Same assignment number I can see in the assignment field of the billing document from which the accounting document is created. I want to figure out where that assignment number is coming from. I mean is it a purchase order or a purchase requisition number etc? How can I find what that number is?

Krishna,
Thanks for taking the time to answer my query. But it does not solve my issue.
Forgot to mention, I had already checked the sort field at the customer master level. It has sort key 009 which is for external document number, but when I display the customer line items Assignment field which is 4 digit is being used for Sorting.At the Sort Field config setting for Account Type Customers Field ZUONR or Assignment is used for Line Item Display Sort Customer. I am talking about settings under Tcode O7F6.
I am interested in finding from where the system is populating the 4 digit number in the assignment field.How can I find what that 4 digit assignment number is?

Invoice reference field on Customer line item

Hi All,
When a billing document is released to accounting, on the customer line item display (FBL5N), the invoice reference field has the FI document number in it.
But if we actually look at the Customer line item on the FI document (FB03), the invoice reference field is blank.
Not sure what is happening over here.
Any inputs on this..
Thanks,
Venkat

OK, i would suggest check OSS on this field, because if this happens for the same document number, than it is a program error (I guess), if it was working fine earlier, and not working fine now, than could be chnage in customizing (if the fill of this field is customizable at all), or a change in the functionality (either standard, or user-exit)

CD line item separately in Customer Line item

Dear Experts,
My client requirement is Cash Discount line item can be separated for Customer Line Item.
Standard setting:
When customer pays the invoice and cash discount is there on invoice the entry will be as below in Standard SAP
Bank Inco A/C Dr
Cash Disc A/C Dr
to Cust A/c
Here when user opens up the FBL5N for the above customer, they don't see that how much exact payment amount has been received as this includes the CD amount as well.
Client Requirement is
Bank Inco A/C Dr
to Cust A/c
Cash Disc A/C Dr
to Cust A/C
Have tried OBXI, Net Document type (cash discount clearing A/C) but can not find the desired solution. Have also tried to search SCN & Google, still could not get any clue.
Would you be needful to put some light on this scenario.
Many Thanks
Kind Regards
pankaj

Thanks Mr. Narasimhulu for your time and reply.
We did have these two column in FBL5N and also we have created ZFBL5N which is generating Net amount field, still am thinking to generate a separate line item for Cash discount and only that line item credits separately in customer ledger.
Can understand that CD is actually the substitute of Cash, as we are sacrificing our cash remittance for CD, still my client wants separate line item.
Is there any way into SAP.
Thanks for your help.
Kind Regards

Create sales order with ref to quotation - usage of line items not copied

hi
i have created a quotation for which the first line item(higher level item) is a configurable item for which the value of the field use (vbap-vkaus) is blank and the line items the use field is given as 'HIDE DISCOUNT'.
when i created a order with reference to the above quotation i am not getting the value "HIDE DISCOUNT" populated for the line items for usage field ..
can any one knows any user exit / data transfer routine please suggest me
thanks in advance
rajani yeluri

hi
i have created a quotation for which the first line item(higher level item) is a configurable item for which the value of the field use (vbap-vkaus) is blank and the line items the use field is given as 'HIDE DISCOUNT'.
when i created a order with reference to the above quotation i am not getting the value "HIDE DISCOUNT" populated for the line items for usage field ..
can any one knows any user exit / data transfer routine please suggest me
thanks in advance
rajani yeluri

Plant/Site field in Customer Line item in f-29 and f-22

Hi All
I have a requirement of adding the Plant / Site field while posting the Customer advances in f-29
I have make the field optional in the Posting key field status variant and in the General Ledger Field Status variant Group in OB41
But still i am not able to see the field of Plant / Site in the customer advances.
Kindly tell me where i am missing some thing or if it is to be added in some other way
Regards
Bilal

Hi ,
For your requirement i tried in my system.The plant filed is appearing in the F-29,F-22.
For that you can do the setting as below
1.Posting Key 19 select Plant is required field in OB41
2.Check in FS00 for bank account filed status and reconciliation of advance from customer account.
3.Go to the Field status for G067,G005.G001 and change plant field as required in OBC4.
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya

TCS tax Should be credit side and adding to the customer line item in debit billing

Dear Expert,
As per the SDN Links, I Configured TCS in our client.
If I put posting indicator 1 then the entry
Customer A/C Dr. 980
Sales A/C       Cr.1000
TCS A/C         Dr.   20
If I put posting indicator 3 then the entry
Customer A/C Dr.1000
Sales A/C       Cr.1000
TCS A/C         Cr.   20
TCS A/C          Dr. 20
But Client need customer will pay TCS So that its should post entry like this
Customer A/C Dr.1020
Sales A/C       Cr.1000
TCS A/C         Cr.   20
I check almost all related topic on this.
I couldn't able to find solution.
Kindly help me on this
Regards
Mani.S

Dear Mani Kumar,
I can send you my configuration setting also.
Kindly suggest me what need to be corrected.
My guess changes need to be done in pricing procedure.
Regards
Mani.S

Pending sales order weight and value

Dear all,
Please guide me that how ill get pending sales order weight and net value for all line items.
I used VBUK for pending sales order where lfstk = ''a' or 'b' and vbtyp = 'c'.
for line item details i used VBUP where LFSTA = ''a' or 'b'.
for further line item details i used VBAP, in BRGEW and NTEWR i get weight and value for particular line item.
But if some line item is partially deliverd, then how i come to know that it is partially deliver and where its details are stored. how i calculate the partial delivered weight and value.
Please help me in this issue.
Thanks
Puneet

hi,
vbap -for sales orders,
likp - for delivary.
if u need remaing qty in partial delivary then u use logic which satisfy the condition below.
OPEN qty = Order Qty - Delivery Qty.
by linking vbap & likp u can get this.
regds:
rajesh.k

Sales order number in customer line item

Hi All,
we have a requirement whereby we need to get the sales order number in the customer line item. Normally, the sales order number is populated in the GL line item (BSEG - VBEL2). We need to copy the sales order number to the customer line item.
Can anyone let me know if you have worked on such requirement.
Thanks in advance!!
Aman Goel

You can map Sales Order number to either 'Assignment' or 'Reference' fields in accounting document using Copy control function in SD. Please use transaction VTFA, this needs to be maintained for combinations of billing type and sales document type. Please ensure these fields are not currently used in your system for other information.
Following fields can be mapped to 'Assignment' or 'Reference'.
A Purchase order number
B Sales order number
C Delivery number
D External delivery number
E Current billing document number
F External delivery no. if available, otherwise delivery no.
If you currently use 'Assignment' or 'Reference' fields for other details, you can use user exit EXIT_SAPLV60B_008.
Thanks
Venkata Ganesh Perumalla
Edited by: Venkata Ganesh Perumalla on Oct 4, 2010 11:52 AM

Section code in customer line item for scrap

Hi
I created customer. I assigned business place to manufacturing plant and then section code to business place. Now i created scrap order and did PGI and invoice.
Now i i saw accounting entry and double clicked on customer line item. There i saw business place field is updated. But section code field is not updated in that.
My requirement is that is TCS certificate is not comming in J1INCERT. Its telling NO DATA SELECTED FOR PRINTING even though i gave all parameters like challan number, date, etc.
Edited by: Deepak Agrawal on May 12, 2010 3:29 PM

HI,
Are you using new general ledger concept?
Regards,
Satish kumar.

Customer balance confirmation does not equal to customer line item display

Hi All
When I run F.17 transaction (program SAPF130D) the totals don't equal to "customer line item display" program (FBL5N) totals.
When I run it for a specific customer and company code, I can see that some items from the customer line item display are missing. These are regular items (invoices) like other documents that appear in the balance confirmation.
The selection parameters are the same and the date is equal - I run the report as of today.
Can anyone advice please?
Thanks
Ofer

Hi
The problem was because of a customer hierarchy issue. Some of the invoices were issued to different sold to but with the same payer.
It can be displayed also in the balance confirmation. I just need to mark the two check boxes:
"Head offices and branches" and "check alternative head offices". Excellent.
Now I have another problem, that in this case, this issue is mentioned in the output: "Dear customer, in this balance confirmation we added the next branches...etc."
Can this remark be eliminated from the output?
Thanks
Ofer

How to move the item level details to line item in the Purchase order form

Hello,
I am in SAP SRM7.0 system, my customers requirement is that the item level details like MPN (Manufacturer Part Number) etc.. should be moved to line item field in the Puchase Order.
Can any one give me susggestion on this. This is not the correct forum for this thread but still pls post the link of related threads which may help in this regard.
Regards
Madhan

HI Masa,
THanks a lot for your reponse, in the option given by you i could find it to make visible or required but there is clue on moving the MPN to item field in the line item level. Can you give more input on this.
Regards
Madhan

Get PO Confirmation and Invoice Number fron SC line item deial like GUID

Hi All,
I want to create ZReport where i have to find Purchase Order , Confirmation and Invoice Number fron SC line item .
I am looking for that tables or FM by using which i can give SC line item Guid and i can get the corrosponding PO , Confirmation and Invoice if any.
Please suggest solution.
Thanks in Adavnce,
Snehal

Hello Snehal,
You can use following FMs to get the required deatils:
FM: BBP_PD_SC_GETDETAIL
      E_ITMLIM_REL
      Select the second entry
      Shift+F5
      Take the HDR_GUID_A for PO
      and HDR_GUID_B for Conf
      and HDR_GUID_C for Inv
FM: BBP_PD_PO_GETDETAIL
      enter the HDR_GUID_A
      Goto E_HEADER           select the OBJECT_ID
FM: BBP_PD_CONF_GETDETAIL
      Goto E_HEADER           select the OBJECT_ID
FM: BBP_PD_INV_GETDETAIL
       Goto E_HEADER           select the OBJECT_ID
This could help you.
Regards,
Suneel Kumar

Sales order doc and item fields in customer line item report(FBL5N)

Similar Messages

Maybe you are looking for