Sales order Price change while releasing the credit block using VKM3

Hi,
Please advice me on the following issue I am facing:
I am creating a sales order, which is having automatic pricing. The price is getting picked up using the condition records correctly in the order. The pricing condition can be manually changed in the order (setting according to the condition type).
So I am changing the price manually in the sales order (system determined price $230 and I changed it to $270) and saved the order. Cross checked the order while saving to make sure the price of the order is now $270.
As the customer credit limit is exhausted, the system blocked the sales order (credit block). I released the sales order using VKM3, but when I checked the sales order, the system reset the price back to $230 (condition record value).
Is this a standard SAP behavior?
My requirement is: the system should not change the value back to the original condition value while releasing the sales order using VKM3.
Please guide..
Regards,
Prasanth

In the condition type definition T Code V/06, fin your manual condition type definition- for the field "Manual Entries" - Have option C "Manual entry has priority".
In the pricing procedure, T Code V/08 in the initial screen - for your pricing procedure - under the column "pricing Type" have Option C - copy manual pricing elements and redetermine others.
Try with these settings. Hope this helps
Regards
Sai

Similar Messages

  • Net price changes when releasing the credit block at VKM3

    Hello All,
    There is an issues in my sales order
    when I am releasing the credit block at VKM3 for my sales order,the net price of the item is increased after the release.
    example the ZP00 price is 5000 USD,ZD00 discount is 1000 USD and net total  is 4000 now after the credit release the net total is increased to 4200 dont know why?
    Please help me in fixing this issues
    Thanks

    Hi
    Check if USEREXIT_NEW_PRICING_VBAP in include MV45AFZB is working. You can know it if you have the coding:
    new_pricing = 'B'
    I hope this helps you
    Regards
    Eduardo

  • Sales Order creation/ change date for the items

    I have a unique scenario and i need to get a Report for this
    A sales order is created for 4 line items.
    Out of these , for 2 line items a delivery is created. I need the sales order creation date and time  for these 2 items in a custom report
    Now the other 2 items go in to some kind of block- Now these are released by going in the sales order VA02 and after releasing the delivery is created. Again for these two items , i need the sales order change date as after a user goes and changes the sales order to remove the block only then delivery is created for these two items
    Also another scenario is the 2 line items go for back order and when we get stock  at tht time system confirms the stock and then the delivery is created for these. So also for this when this change occured i need to get the date for these 2 line items
    Can any one please suggest how to get this data  from the scenarios?
    I dont want to get the date when the delivery is created as i can get tht from the LIKP table. I need the sales order create and change dates for these.

    You may be aware, any changes to a document will be recorded in CDHDR (for header changes) and CDPOS (for item changes).  You can explore these two tables.
    thanks
    G. Lakshmipathi

  • Sales Orders not flowing in COPA if Credit block is set

    We are implementing COPA for reporting in BW. The Billing information is flowing well in COPA. However, we have one issue with Sales Orders. Here is the scenario:
    When we create a new Sales Order without any credit blocks, the information is flowing to COPA Tables in R/3. However, if the Sales Order is blocked for Credit reasons, then the Sales Order information is not available in COPA. The moment the Credit block is released we are able to see the info in COPA Tables.
    The requirement is to have the Sales Order information availabe in COPA no matter what. Is there a way via which we can make the Sales Order info flow in COPA the moment it is created, no matter it has any blocks.
    Any info on this is highly appriciated.
    Thanks
    Srini

    Hi,
    I think it is a standard behaviour of Co-PA.Refer the note: 139725
    With rgds,
    Anil Kumar Sharma .P

  • Repeat credit check does not happen for already released sales orders when CMGST =D, for the second time using FM SD_ORDER_CREDIT_CHECK

    Hi,
       I have written a routine which will call the FM SD_ORDER_CREDIT_CHECK whenever there is a rejection and again unrejection of a same sales order, we are only concerned about already credit released sales orders, the scenario is as follow
    1). Sales order created in the system --> Credit check --> Credit blocked
    2). Release credit block manually CMGST =D
    3). Reject sales order then unreject the same
    4) Routine will determine rejection and unrejection of the order while saving and will call the FM SD_ORDER_CREDIT_CHECK
    5)   The order is credit checked and blocked if necessary
    All goes well till this point
    but when the same sales order is rejeceted and unrejected multiple times either partially/ fully then the Custom routine calls the FM for credit check but the FM fails to put the order back on credit hold
    in short the FM works only for the first time incase of mutiple rejection and unrejection of teh same sales order then the FM SD_ORDER_CREDIT_CHECK fails to put the order back on credit hold from the second time onwards
    if some one any idea of the behavior of this FM please share your thoughts and inputs . thanks !!

    Issue resolved
    The Standard FM “SD_ORDER_CREDIT _CHECK” uses the field  “Release date of the document determined by credit management  VBAK – CMFRE”
    For any sales order that is manually credit released in a single day, Only one credit check is triggered (per day) if there is any change in the sales order and then the order goes back to credit hold and if again the order is manually credit released for the second time in a single day there will be no credit check  (still the order will pass into FM but  the update entry in the internal table will be blank)this is a standard functionality
    Process of rejection and unrejection :
    Blocked order -->released-->blocked again (first time after manual release same day) unrejected (same day) -->but no credit check  (all this in a single day)
    note : OVA8 - released document still unchecked = 0 Days , Deviation %= blank

  • Sales order not shown up for VKM1 (credit block)

    Hi All,
    I have created the SO & its has exceeded the credit limit.
    The system has put the devliery block due to (credit limit) & the header status is overall bloked but the credit status is showing as "not performed".when i try to list/release the SO from VKM1 or VKM3 the order it self is not visibile here.
    Is't due the system status not updated correctly in the SO as "not approved" or else kindly help to let me know how to over come this problem.
    Thanks.

    Hi Hirshi,
    System has performed the credit check & its has pop-up the warning message for the static credit check  before saving the order & even the order is been blocked for delivery "with credit check".so that means system has done the credit check.
    In OVA8 i hav't assigned any routinue for the "No credit check" its left blank.
    Kinldy suggest.
    Thanks

  • Help Required  -  Urgent!!!(Release of Credit Block)

    Hi gurus,
    I am trying to release the credit block through T. Code VKM3, When i am releasing it, I get this message. <b>** No message found in T100 </b>.
    When i am looking at the description of it i get this message :
    "Document <b>V1902</b> is not available in language EN"
    What does this signifies.
    Rgds
    VIVEK

    hi ,
      if i am not wrong ,it is saying that authorisation is missing at company code and credit control area level for a particular user login,.
      reward if helps @@@@

  • Workflow in the releasing of Credit blocked sales orders.

    Hi All,
    My Client requirement is that they need workflow in the releasing of credit blocked sales orders.
    If once sales order is blocked then it should be approved at 3 levels, then only it should be released.
    Suggestions are highly appreciated 
    Regards,
    Kumar

    Hi Kumar,
    I think you can achieve this by using Authorization Concept.
    Please find the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/52/671285439b11d1896f0000e8322d00/content.htm
    Authorization levels for Credit Rep Groups
    Thanks
    Dasaradha
    Edited by: dasaradha ramireddy on Nov 28, 2011 12:53 PM

  • Release sales order credit block using VA02

    Dear experts,
    By any chance can we release the sales order from credit block using VA02 instead of VKM3?
    I could see an example wherein the change log shows that the Overall Credit Status has been changed to Approved using VA02.
    Could you please assist me with all the available methods of releasing the sales order from credit block.
    KR,
    Tawsif Chogle

    Hi Tawsif,
    I dont thing that is possible, once you released the order from VKM3, it suppose to show VKM3.
    But if you say that your order shows in VA02 for credit release then might be somebody change the price in order, so the order price comes lower the credit limit and order got released.
    Hope it helps.
    Regards,
    MT

  • Auto release of Blocked Sales orders after pmnt or Increase of Credit limit

    Hi
    Does anyone know if there is a transaction or something in one of the blocked Order transactions that can be used to auto release orders after either 1 - Monies have been recieved      or   2 - Credit limit has been increased
    Scenario we have is several orders have been on block due to credit being over credit limit,
    The credit limit has been increased
    However these orders are still on the blocked orders report, even tho they are now under the credit threshold
    Is there a re-org program to use ?
    Is there a setting on the VKm1 transaction to refresh or re-read the credit master FD33 , - as now monies have been received or Credit threshhold has been increased
    Thank you for any information
    Tony

    Hello,
    This is not possible because when you created the sales order it has checked the credit limit for that credit limit and if you increase also now that block cant go automatically.
    Go to VA02 i.e change mode of sales order and change something and enter may be if you created a order for 2 quantity then go to VA02 and remove the quantity 2 and again type 2 then system will again check for credit and now that is increased so the order will not block..
    If this is for many order then you can run changes sales order  BAPI for mass update. Take help from ABAP guys.
    Cheers
    Say

  • Change the Sold to Party(SP) in sales order in change mode

    Hi,
    Is it possible to change the Sold to Party(SP) in sales order in change mode?
    If yes then How??
    Regards
    Somnath

    Hi somnath,
    It is very much possible to change the sold-to-party in the change mode of Sales order(VA02).
    Goto VA02-->enter the sale order number.
    Press enter.
    In the overview screen if you change the sold-to-party then every thing will be redetermined(Taxes and pricing procedure etc...).These will be determined from CMr etc.
    You cannot change the sold-to-party at the partners tab that is present in the Header details.
    It will be greyed out.
    If you change the sold-to-party at the overview screen as suggested earlier it will not apply to the item.
    You are also going to see this message while changing.
    And finally save the document.
    Regards,
    Krishna.

  • Changes to Purchase order also changes sales order prices

    We have a unique problem which cannot be replicated and occurs once in a while. Sometimes when a purchase order which has the account assignment as sales order is changed, the corresponding sales order line item suddenly loses its net value and becomes worth $0.
    This problem happens once in 1000 sales orders and cannot be replicated again in the quality or the productive system. Has anyone ever experienced something similar in their SAP system.

    Hi Santosh,
    In addition to the above
    Using FM ME_READ_CHANGES_EINKBELEG we can get the changes done to a PO on a particular day.
    Any change to the PO is recorded in the table XCDHDR and changes to a particular field of is recorded in XAEND with present value and the previous value.
    Please check if this solves ur purpose.
    Regards,
    Kishore Gaddam
    Edited by: kishore gaddam on Mar 11, 2010 7:38 AM
    Edited by: kishore gaddam on Mar 11, 2010 7:45 AM

  • Need to pull INITIAL(vbap)net price of  Sales Order, after changing viaVA02

    Hi Experts,
    Mine is differetnt requirement..........
    I created a my_Sales_order_12345678 with 2 items, as follows,(all following values/entries r for my_Sales_order_12345678)
    line item_10---->net_value_netpr = $100
    line item_20---->net_value_netpr = $200
    Then the VBAP entries as r as follows,
    POSNR -
    >NETPR
    10----
    > $100
    20----
    > $200
    I changed first time as via VA02 tx, as
    line item_10---->net_value_netpr = $300
    line item_20---->net_value_netpr = $400
    Then the VBAP entries as r as follows,
    POSNR -
    >NETPR
    10----
    > $300
    20----
    > $400
    I changed second time as via VA02 tx, as
    line item_10---->net_value_netpr = $500
    line item_20---->net_value_netpr = $600
    Then the VBAP entries as r as follows,
    POSNR -
    >NETPR
    10----
    > $500
    20----
    > $600
    My requirement: for some reason, I need the initial values, I mean
    the VBAP entries of,
    POSNR -
    >NETPR
    10----
    > $100
    20----
    > $200
    I tried with CDHDR & CDPOS tbls, but no use? So, from Where Can I get/pull them??
    thanq
    Edited by: Srinivas on Jan 24, 2008 12:22 AM

    hi sirnivas..
    Thanq you for the points..these are the first i ever recieved..
    if you are working on peice of code which can get the price history do me a favour if you have finished the code just explain it to me who did u  do that...
    i have been working on an object from last two weeks to get the latest price...
    the thing is even though the price for condition items has been changed it wont get updated in the Sales orders unless new pricing fot the document is done...
    so i have to get all the sales orders who condition items price has been changed and display them in an ALV...so if you can get the exact old values...for the conditions i guess the opposite also can be done.....
    Here i have suggestion for you...in condition items there is a process called SCHEMA ( pricing Schema) which you can see using Condition Analysis button at the bottom of the condition item window...
    you can see all the price changes to the condition when you parse the tree structure of the procedure..EXAMPLE :- R0000 etc...
    so some Sales orders if the Schema has been changed all the existing condition are replaced by New ones from the changed Schema...so i guess that would play an important role in deciding the Price of Sales order...
    I know this is bit long but .....if you did finsish your program do let me know how you did it...
    Thankyou very much and good luck.

  • Error while releasing the Process order

    while releasing the Process order i am getting the follwing error message
    Message no. CO118      Release of order not possible
    Cna you Please any body explain me detail of thi error ie where the error lies.
    Thanks

    Hi,
    In Process Order Header Screen Go to ---> Log ---> On Release.Here you will find the detail error behind this problem.Go though it .Resolve it and then try to release the Process Order, and if required get back to us.
    Suppose reason may be,
    - Missing part
    - Missing Capacity
    - Batch Determination is required to perform.
    - Any User Exit (Other then std. SAP)
    Regards,
    Dhaval

  • Purchase orders are duplicated when the SAP sales order is changed

    HI Guys
    We got an issue here, when a sales order is changed at the same time PO is duplicated and sent to the vendors.
    Someone just enter a change of address on this sales order and our system sent PO which is already being Invoiced, again to the vendor for a ship direct order. But this time the only information the vendor got was the address change.
    Any idea where is it going wrong. (Version 4.7)
    Will assign points to every useful answer.
    Thanks

    tranz V/30 or
    spro
    sd
    basic fun
    output control
    maintain output type (before find your output type in your sales order)
    cond.type - details
    TAB General data
    check the flag for Multiple issuing
    check TAB Default values as well

Maybe you are looking for