Sales tax in PO but not included at the time of GR

Hi,
i have creted the PO including sales tax amount, is there any way when i post the GR against this PO the sales tax amount not calculated.

Hi,
In response to your requirement:
let me clear my business scenario...
total price of po is usd100 and sales tax is 20%.
system calculate sales tax separate the reason being the codition type for sales tax is statistical.
is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
Regards,
Ali
This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
Also donot make it statistical as you want to include it in the net price calculation.
Thanks,
Atal

Similar Messages

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

My phone's speakers only work sometimes. Sometimes it is better when I plug in my headphones, but not all of the time. Any idea's?

My phone's speakers only work sometimes. It started recently, and I just moved to Hawaii so I am at the beach alot. Could sand have something to do with this? Sometimes it is better when I plug in my headphones, but not all of the time. Any idea's?

cmhatch93 wrote:
I just moved to Hawaii so I am at the beach alot. Could sand have something to do with this?
Absolutely!
If you are taking your $500 electronic device to the beach, I recommend you get a case that completely seals the iPhone from the elements (ie. waterproof).
-> http://reviews.cnet.com/8301-19512_7-57587098-233/top-waterproof-iphone-5-and-ip hone-4-4s-cases/

Imported Audio CD, two songs imported but not included on album with rest of songs

I just bought an Audio CD "Red River Blue", Artist Blake Shelton. I imported the CD into my iTunes library.
The CD has 11 songs on it. All 11 songs were imported into my iTunes library. Two of the songs had additional artists listed on the credits.
Track 7 Blake Shelton with Martina McBride and Track 11 Blake Selton with Miranda Lambert.
These two songs were imported into my library but not included in the Album. They were labeled with their correct track number and the album was missing a song for track 7 and track 11. There was no cover artwork associated with those songs.
When I moved the album to a playlist these two songs were not included.
This is clearly an error in the current iTunes!
Back before iTunes had the new visual format and new user interface I did not have this problem.
I have reviewed all the preferences for iTunes but can not find any that would seem to control this behavior. I can not conceive that importing a cd should work this way.
I tried to find a way to correct this situation and found that if you did get info on all 11 songs you could force them to be included on one album.
The resulting album did not show track 7 in the correct order and the two tracks were still missing the cover artwork.
I believe that in one of the iTunes updates that required a library conversion all my albums that had this situation were converted wrong so they broke apart songs from their albums.
Jim

And thinking about it, when I reconnected last Sunday I recall that I got that prompt on my phone something like "Do you trust this computer?". Not seen that one for a while.

Subject:-Tax reduction in invoice is not possible at the time of LIV when c

Dear SAP expert
Subject:-Tax reduction in invoice is not possible at the time of LIV when corresponding order is closed.
While carrying out the LIV of vendor invoice against service entry sheet , ERROR message of Order xxxxxxx created in PM module is closed. Main reasons for the same is Service tax at time of service entry sheet is 12% and at the time of invoice verification it is 3.96% and reduced tax amount is credited to order. Which we can say is restricted as after Order closure cost cannot be changed on order.
Is there any solution available?
s ap

Hi,
In response to your requirement:
let me clear my business scenario...
total price of po is usd100 and sales tax is 20%.
system calculate sales tax separate the reason being the codition type for sales tax is statistical.
is it possible that the value of sales tax included in the PO net price but not calculate at the time of GR.
Regards,
Ali
This is very much possible. Include your tax condition type in the calculation of net price and make this tax as deductible.Donot assign NVV key to it.
Also donot make it statistical as you want to include it in the net price calculation.
Thanks,
Atal

When syncing iTunes reports "The iPod "name" cannot be synced. A duplicate file name was specified. ". the music is updated but all the sleeve imagary is not including deleting the existing images. How do I solve please?

When syncing iTunes reports "The iPod “name” cannot be synced. A duplicate file name was specified. ". The music is updated but all the sleeve imagery is not including deleting the existing images. How do I solve please?

Hello WGT52,
It sounds like this error message is preventing you from syncing your content to the iPod. I would recommend the troubleshooting steps in the following article:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
Thank you for using Apple Support Communities.
Take care,
Sterling

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

GACU,
OK, now I think I understand your problem.
If it is your calendar that is being shared with other users who have been granted editing priviliges, you will not be able to exclude those events from printing.

Send Mail from, but Not Include Mailboxes

Any way to send mail from an account, but not include that account's mailboxes in mail.app

Depends on the provider of any other accounts. For example, you can add an address to the preferences of another existing account, separated by a comma, and have that additional address available in the list of From addresses. Then if your SMTP will allow, you can send from that address.
Doesn't work with the Gmail SMTP, as it will change the From to be what is used to Authenticate the SMTP.
See:
http://support.apple.com/kb/TA23485
Another address can be set up similar to a true alias.
Ernie

When uploading pictures from my iPad to my PC it wants to upload 8117 pictures but I have 8052 on my iPad will clicking erase after upload delete all my pictures including the pictures that are not included in the u

When uploading pictures from my iPad to my PC it wants to upload 8117 pictures but I have 8052 on my iPad will clicking erase after upload delete all my pictures including the pictures that are not included in the upload

Sorry mixed my numbers up I was in such a hurry to post the question uploading 8052 but I have 8117

I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all help

The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource.

Tax Amount is not capturing at the time of GRN

Dear friends
i have created a PO with VAT+Sur cahrge tax code
The system is calculating the total taxable privea nd value in PO
While doing GR,System is not capuring at the time of GRN it is only capturing the price without taxes
Can any body help on this?

Dear Sanjay
thnks for your replay
But how can I add these values(vat-5% and Surcharge-10% on vat ) in to inventory acount
The accounting document generated at the time of GRN should have the material price +Total Tax amount
Expecting your reply
Thnks again

Service Tax credit posting not happening at the time of Service Entry sheet

Hi
I am accepting (releasing) service entry sheet of some services. Entry was posted:
Service Expense A/c.. Dr
To SR / IR A/c...
As per new service tax law, we can take credit at the time of accrual of services i.e. at the time of accepting service entry sheet. But the service tax posting is not done at the time of expense booking (see above entry). Service tax posting is done at the time of MIRO (invoice verification).
Entry Requirement:
Service Expense A/c.. Dr
Ser Tax Basic A/c... Dr
Ser Tax EC A/c... Dr
Ser Tax SHEC A/c... Dr
        To SR / IR A/c...
Please help how to take credit at the time of posting service entry sheet itself.
Edited by: Meenu_ND on Aug 5, 2011 1:39 PM

HI All,
I hope what he (Meenu_ND) menctioned int he first thread was correct. Service Tax Credit you can avail at the time of Invoice Booking or the Payment and not at the time of Service Etnry Relise. Please check once.
Regards

Service Tax credit entry not happening at the time of Service Entry sheet

Hi
I am accepting (releasing) service entry sheet of some services. Entry was posted:
Service Expense A/c.. Dr
    To SR / IR A/c...
As per new service tax law, we can take credit at the time of accrual of services i.e. at the time of accepting service entry sheet. But the service tax posting is not done at the time of expense booking (see above entry). Service tax posting is done at the time of MIRO (invoice verification).
Entry requirement:
Service Expense A/c.. Dr
Ser Tax Basic A/c... Dr
Ser Tax EC A/c... Dr
Ser Tax SHEC A/c... Dr
        To SR / IR A/c...
Please help how to take credit at the time of posting service entry sheet itself.
Edited by: Meenu_ND on Aug 5, 2011 1:38 PM

HI All,
I hope what he (Meenu_ND) menctioned int he first thread was correct. Service Tax Credit you can avail at the time of Invoice Booking or the Payment and not at the time of Service Etnry Relise. Please check once.
Regards

Where Can I Find Components And Footprints Not Included In The Circuit Design Suite Databases?

One of the most common questions asked by users of the Multisim and Ultiboard suite is about finding components. From time to time you may come across the need of a particular component or footprint (lanbdpattern) that is not included in the master databases. So where can you look for these components? There are multiple places to begin your search, both 3rd party and from NI that are free and readily accessible:
One of the long-standing free resources is the Kittmaster's Component Database which is maintained by Kittmaster (Chris) one of our proven active veterans of this board as well as a Beta Tester of the Circuit Design Suite. You will find a vast collection of already built parts in Multisim and Ultiboard formats that have been submitted by users like you that have register on kittmaster's database and that actively upload custom component creations. I encourage you to register and share.
NI has recently created the Circuit Design Community in response to requests from users around the world. The Circuit Design Community aims to provide an open resource for designers that need or would like to share Multisim components, Ultiboard footprints, sample design files and other documents that are of use for the design community. The basic difference between the Circuit Design Community and this Circuit Design Discussion Forum is that the Community is tailored for document and file sharing, whereas the Forum is designed with problem solving, tip sharing and general support questions in mind. Again, I encourage you not only to search, but also to share any components you may have created that are useful for other designers.
Most manufacturers that offer SPICE or PSPICE models in their websites would typically allow you to download them free of charge, in most cases accepting a license agreement. The first step is to identify who the manufacture of the part you are looking for is, as well as cross-reference manufacturers. Then search in their corresponding websites for the product folder or design resources section. If you find SPICE or PSPICE models you can easily import those when creating a new component, remember that Multisim is highly compatible with PSPICE models, and every new release adds more compatibility. If you cannot find the model, it does not hurts to call or email the manufacture and ask directly if they have such models, in many cases they are not advertised in the web.
Last, but not least, use your favourite internet search engine and see if anyone out there has posted or worked on a similar model.
Thank you for using the support resources and I hope that these options fulfill most of the component searches that you may need to do.
Message Edited by nestor on 04-14-2009 02:52 PM
Nestor
National Instruments

You can have a look at some established projects that are using similar tools - where do they put the application files etc.
There are things like XDG_CONFIG_HOME, XDG_DATA_HOME etc. http://standards.freedesktop.org/basedi … atest.html

The tax code entered is not defined in the country for this company code

HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
    The tax code entered is not defined in the country for this
    company code.
System Response
Procedure
    Check and, if necessary, correct the entry.
Procedure for System Administration
    If it is not an input error, check and possibly change the
    system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure
        is assigned to the relevant country. the Procedure
        field is in the detail screen.
    2. Create a new tax code if required.
Thanks & Regards
Aarman

You can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA

Sales tax in PO but not included at the time of GR

Similar Messages

Maybe you are looking for