Sales text is not getting copied

hi all,
while creating a sales order with ref. to sales inquiry, the sales text
is not geting copied in domestic order, where as in export sale the same material is coping the text from inq to sorder.
Regards ,
siddu

go to VTAA (copy cotl from sales doc to sales doc)
and  c if copy cotl is maintained from your inquiry document type to oder type. if it is maintained and text determination is okay, the text would get copied.
-prashant

Similar Messages

  • The pricing procedure in Sales order is not getting copied into invoice

    The pricing procedure in Sales order is not getting copied into invoice.
    I have created a document type (pricing procedure),based on the document type ,pricing procedure determination is done.
    So while creating sales order the pricing procedure is determined but when invoice is created the pricing doesnt refelect in the invoice.How to over come this problem

    Hi
    Please check the in OVKK, weather you have maintained correctly or not.Also check in the Billing document type details what is the Document pricing procedure that has been maintained.
    Regards
    Srinath

  • Request For Quotation - ME41 - Item texts are not getting copied

    Hi,
    I created one RFQ (Request For Quotation) by copying from the existing one (through t-code ME41). But item texts are not copied.
    How can this issue be resolved..?
    In menu path ( Item --> Texts --> Adopt Text ), "Adopt Text" option is available. But its in disabled mode.

    just use F4 to get a valid entry, it is only grey to prevent manual typing

  • Test maintain in sales order header not getting copied to delivery

    Dear All,
    I have maintained the text in sales order header.Initially system was copying the the text to delivery header but now it is not copying.I have not changed any setting.Please guide what could be the reason.
    Regards,
    Deepti

    Hi,
    Check the language texts, ie: perhaps the language of SO is EN because the language of customer is EN but the language of delivery is DE, and in VOTXN you have a flag for language with wrong option.
    I hope this helps you
    Regards,
    Eduardo

  • VAT /CST% manually in the sales order,not getting copied to the Invoice

    Dear Friends,
    If I change the VAT /CST% manually in the sales order,its not getting copied to the Invoice
    Thanks
    Ivy

    Dear Friends,
    Thanks for your valuable inputs....
    I have maintained the condition record for the combination of delivery plant region and the customer  region.......assigned dummy tax code against the Tax condition...therefore I think there wont be any problem in posting billing doc to accounting doc.
    There are different combinations,where sometimes the user is liable for 2% CST ....sometimes 4%CST... but I am able to pick one tax value say 12.5% CST across and maintained the tax condition types - manual entry has priority, as allowed the user to change the value manullay as per the user requirement ....
    Now if i change the Tax condition value in the sales order ,the same is not reflecting in the Invoice....this also is applying from contract to a sales order...
    Please advice me accordingly...
    Thanks
    Ivy

  • BOM main item not getting copied in delivery

    Hi SAP experts
    The problem iam facing is the main item in sales order is not getting copied in delivery and subsequently not able to generate the billing document as the subitems are not relevant for billing.  I got a solution saying that the problem is with the delivery group in the item category.
    But for the same item i tried to create order for a different order type and it seems to be working fine. Its happening for a particular order type only.
    I checked in the copy control settings and settings seems to be fine.
    Can somebody help me on this issue.

    Hi,
    In VTLA, check copying requirements.
    Regards
    SD

  • Item text not getting copied into sales order from inbound Idoc

    Hi All,
    I have a scenario where in we get the sales order created through a inbound 850 idoc .
    The trading partner sends the sales order information which gets through GENTRAN and gets posted as inbound idoc in SAP .
    The problem here is that ,there are segments with values for item text in the idoc ,but the item text is not getting carried over to the sales order which is getting created because of this idoc.
    There is no problem with the header text and it is present both at the idoc as well as the sales order level.
    I have checked the configuration for text determination and everything looks fine .
    Please let me know has anyone come across a scenario like this .This is important as our EDI is getting failed when an outbound 810 is sent from SAP for the simple reason that there is no item text .
    Thanks
    Sridhar

    Hello Sridhar
    Do you have access to the genuine 850 EDI message? Does it contain the item texts? If so then there is probably a problem with the (XSLT) mapping EDI 850 -> ORDERS.ORDERS05 IDoc.
    Are you able to test the mapping independent of the EDI transmission? This way you could nail down the problem.
    Regards
       Uwe

  • On the basis of Sales item Text, item should get copied to Return order

    Hi
    I am creating Return order With ref to Billing Doc.
    when i click on copy one popup is coming that is for Sales item Text.(I want to click on Copy & not Selection List B'cos  in Selection List Sales Text will not come)
    So as per the Text i should select the material in Return Order.
    but when i click on red cross on Sales text window(POP Up), that material also getting copied in SO, which was not happening earlier...
    any configuration in Sales Text is there or some Userexit is there???
    Reg.
    Amol

    Hi AL,
    As such, this is a basic functioanlity of MRP.
    Once you enter a forecast & take a MRP run system proposes, when to start the production based on the production leadtime &  purc.reqns for the raw materials based on the procurement lead time.
    And the same can be viewed from various reports..FOr example MD04.
    For this to work the MRP configurations should be valid.
    Could you please confine your question to a specific query..?
    Thanks & regards
    Mahesh

  • Manual discounts are not getting copied from Quote to Sales order

    Hello All,
    If I assign a manual discount to any item in Quotation document, this condition type with its discount amount is not getting
    copied over to Sales order document, I have selected the drop down "D Copy all conditions" in the copy control for item categories,
    and both quote & Sales order use the same pricing procedure, i am i missing something here?
    I appreciate your help
    thanks
    Chandu

    Hi Chandu,
    Please try to adopt the standard pricing type in the copy control between QT and OR which is "A - Copy Pricing components Unchanged and redetermine Scales".
    Please share the outcome.
    Regards

  • Sub items are not getting copied into excise invoice

    Hi Guru's
    I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
    I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
    When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
    When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
    Kindly suggest me how can I copy subitems into excise invoice from billing document.
    Thanks & Regards.
    Swamy H P

    Hi Lakshmipathi,
    Thank you so much for the response.
    Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
    I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
    But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
    I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
    Thanks & Regards,
    Swamy H P

  • Incoterms are not getting copied at the item level

    HI Gurus,
    I have an sales order where If we change the Incoterms at the header level, its not getting copied at the line Items. Its giving an information mesage stating, Header Business Data does not apply to Item.
    The Incoterms are intially getting copied from Customer master, but later I am not able to change it.
    Please let me know what might be the reasons ? If possible Please let me know some User exits which needs to be checked.
    Thanks,
    Swathi

    Check in VOV8 for your sale order type the following:-
    a)  If both Check Division and Item division are ticked, then system will pop up this message due to the fact that in the said sale order, the item division differs from header division
    b)  The field "ProdAttr.messages" should be blank
    Next go to VOV7, select your item category and execute.  There ensure that the box is ticked for "Business item".  If this is unticked, then system will copy all header data to line item and you cannot change it.
    thanks
    G. Lakshmipathi

  • Sales Office is not being copied from Sales Contract

    Dear SD Gurus,
    In DP90(Resource-Related Billing Request), order type LV (Debit Memo Request for Contract) is generated. In the complection procedure, I have set sales office as a mandatory field. I'm expecting the sales office to be copied from sales contract when I generate ZLV(when I run DP90) but sales office is not being copied over. The strange thing is, it will only work for certain sales areas where the sales office will be copied from sales contract but not for some.
    In the service order, I can see the sales org data where the sales office appears but it doesn't get copied to LV.
    Any idea what has happened?
    Thanks,
    Soo

    Hi Kamesh,
    Problem found and fixed. It was because of customer master.
    Thanks,
    SKK

  • Ordered Quantity does not get copied to Invoice by  DIAPI

    Hi All,
    I am stuck with an issue in Invoice creation using  DI API by code.The field Ordered Qty (DB Filed INV1.OrderedQty) does not gets copied to Invoice line from delivery lines. But while we add invoice from delivery >Copy To> AR Invoice , it gets copied to Invoice lines. This OrderedQty field is not exposed through DI API, so we cant set that field throgh code. What I do in Invoice creation code is as follows.
    SAPbobsCOM.Documents oINV;
                        oINV = (SAPbobsCOM.Documents)
                            modups.oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
                        oINV.CardCode = oDLN.CardCode;
                        for (int i = 0; i < oDLN.Lines.Count; i++)
                            oDLN.Lines.SetCurrentLine(i);
                            string str = oDLN.Lines.ItemCode;
                            if (i != 0)
                                oINV.Lines.Add();
                            //oINV.Lines.ItemCode = oDLN.Lines.ItemCode;
                            //oINV.Lines.Quantity = oDLN.Lines.Quantity;
                            oINV.Lines.BaseType = Convert.ToInt32(SAPbobsCOM.BoObjectTypes.oDeliveryNotes);
                            oINV.Lines.BaseEntry = oDLN.DocEntry;
                            oINV.Lines.BaseLine = oDLN.Lines.LineNum;
                            taxcode = oDLN.Lines.TaxCode;
    if (DeliveryExpenseCount > 0)
                                for (int i = 0; i < DeliveryExpenseCount; i++)
                                    oDLN.Expenses.SetCurrentLine(i);
                                    if (i != 0)
                                        oINV.Expenses.Add();
                                    //oINV.Expenses.ExpenseCode=i;
                                    oINV.Expenses.ExpenseCode = oDLN.Expenses.ExpenseCode;
                                    oINV.Expenses.LineTotal = oDLN.Expenses.LineTotal;
                                    oINV.Expenses.TaxCode = oDLN.Expenses.TaxCode;
                                    oINV.Expenses.BaseDocEntry = oDLN.DocEntry;
                                    oINV.Expenses.BaseDocLine = oDLN.Expenses.LineNum;
                                    oINV.Expenses.BaseDocType = 15;
    int retVal = oINV.Add();
                        if (retVal != 0)
                            int lErrCode; string sErrCode;
                            modups.oCompany.GetLastError(out lErrCode, out sErrCode);
    Any help will be appreciated..
    Deepesh

    Hi Gordon,
    Thank you for your reply.But it didnt fix the problem.The only change of previous code with this one was oINV.Lines.Add() method is called in the last of the loop.But it wont fix issue. 
    Updated on 20/10/2011
    I have found the issue.The issue is causing if we update the resulting invoice's expense lines.
    If we copy the expense lines from delivery and update any line with an amount it works fine and resulting invoice has "Ordered Qty" in its lines. Code is
    for (int i = 0; i < DeliveryExpenseCount; i++)
                        oDoc.Expenses.SetCurrentLine(i);
                        if (i != 0)
                            oINV.Expenses.Add();
                        string s = oDoc.Expenses.TaxCode;
                        oINV.Expenses.TaxCode = oDoc.Expenses.TaxCode;
                        oINV.Expenses.BaseDocEntry = oDoc.DocEntry;
                        oINV.Expenses.BaseDocLine = oDoc.Expenses.LineNum;
                        oINV.Expenses.BaseDocType = 15;
                        oINV.Expenses.LineTotal = oDoc.Expenses.LineTotal;
                        if (radioButton2.Checked == true && i == 0)
                            oINV.Expenses.LineTotal = oDoc.Expenses.LineTotal + Convert.ToDouble(txtExp.Text);
    But if the delivery has no expense lines or we are adding a new expense line to the invoice while invoice creation from delivery , the resulting invoice does not have "Ordered Qty " in its lines..
    Code is
    if (DeliveryExpenseCount > 0)
                            oINV.Expenses.Add();
                        oINV.Expenses.ExpenseCode = 1;
                        oINV.Expenses.TaxCode = taxcode;
                        oINV.Expenses.LineTotal = Convert.ToDouble(txtExp.Text);
    If I try to add lines
    oINV.Expenses.BaseDocEntry = oDoc.DocEntry;
      oINV.Expenses.BaseDocType = 15;
    to the above code it may show either "Internal error" or " No matching records found".
    Is this a bug in DI API?

  • Gross weight and net weight not getting copied from Inquiry to quotation

    Hai Gurus
    Could anyone tell me why gross weight & net weight for the particular quantity of goods are not getting copied to quotation and order from an inquiry. All other details that I maintain in an inquiry (shipping type, receiving point etc) are getting copied  to quotation.
    regards
    John
    Edited by: Gino12 on Nov 11, 2010 12:49 PM

    Dear
    Did you maintain in MM02-MMR-Sales/Plant  view Gross weight and Net wirght ??
    System calculates the net weight based on the order quantity for the item and the net weight proposed from the material master record. If the item has more than one schedule line, the system uses the total order quantity of all schedule lines to calculate the net weight. In sales documents where schedule lines are not allowed (contracts, for example), the system calculates the net weight using the target quantity.
    Regards
    JH

  • Weights are not getting copied from quote to order

    Hi All,
    While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in  quote has weight.
    Why are the weights not getting properly from quote to order .

    hi
    goto VTAA and select the target document
    click on Magnifying glass symbol
    here check whether you have selected complete Reference or not
    But if you select this then the system copies the source document completely.
    Procedure
    If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
    Regards

Maybe you are looking for