Same AS2 message to multiple partners

Hello,
We have a scenario where the same IDOC needs to be sent to one of many different partners (but only one partner at a time).
Rather than hardcoding n routings in the receiver determination and having to create n comm channels, is it possible to dynamically configure the end URL (HTTP address) in a single comm channel?
Thanks and Regards
Manish

Just to wrap this up...
We ended up creating a separate party for each partner - with the corresponding AS2 ID. We could not achieve dynamic routing because in addition to the unique URLs and AS2 IDs per partner, we also needed to refer to the partner's certificate for encryption of the message.
So based on the ANA code in the IDOC, the message is routed to a specific party. Each party has a specific receiver comm channel with the connection details. Each comm channel is attached to a Receiver Agreement (per message type) that contains the certificate information.
However, we are dynamically identifying the message type (ORDHDR or DLCHDR) thus we can reuse the same comm channel for different message types, and just call different BIC mappings as needed.
Hope this helps anyone facing the same design dilemmas.
Rgds
Manish

Similar Messages

  • HT3529 Is it possible to send a the same text message to multiple recipients?

    wanting to send the same text message to multiple contacts at the same time? is this possible

    Are you talking about in the contact window? Because when I select a contact in there the contact window appears and the plus sign in the top right is replaced with the edit button?

  • Multiple Partners for the same customer in Message tracking of SEEBURGER

    Hi,
    This is for third party customers which use EDI messages. We have for one customer multiple partner numbers configured in Partner profile. I would like to know while configuring the trading partners in SEEBURGER Message Tracking, can we have multiple keys for the same customer for multiple partners for an INVOIC02. Like the following keys:
    12345_INVOIC02
    34567_INVOIC02
    45678_INVOIC02

    Hi Satya,
    you can define for a vendor/customer several partner functions with different        
    adresses. You can create certain partner roles several times.               
    If you create a purchase order, than you can choose the wanted              
    address and partnerrole on the header level. In the standard system you     
    can use the patner role 'OA' ordering address and for the finance           
    the 'IP' Invoice presented by.
    I hope I was able to help you.
    Kind regards,
    Zsuzsanna

  • Bapi_po_create1 is giving same system messages  multiple time in the joblog

    Hi Experts,
    Bapi_po_create1 is giving same system messages multiple times in the job log when we ran the program in the background
    can u plz suggest how to prevent these multiple appearances of same messages.
    I am pasting the code below whn i ran this program in backgorund job log is having the messages.
    Date       Time     Message text                                                                 Message class Message no. Message type
    08/06/2009 08:11:53 Job started                                                                       00           516          S
    08/06/2009 08:11:53 Step 001 started (program ZZZTEST, variant &0000000000008, user ID BREDDY)        00           550          S
    08/06/2009 08:11:54 Commitment plan contains no account assignment data                              MECP          020          S
    08/06/2009 08:11:54 Commitment plan contains no account assignment data                              MECP          020          S
    08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
    08/06/2009 08:11:54 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
    08/06/2009 08:11:54 Source not included in list despite source list requirement                       06           722          E
    08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained                          VH           777          S
    08/06/2009 08:11:55 Pricing/euro: Attention: Euro Customizing not maintained                          VH           777          S
    08/06/2009 08:11:55 Status "Initial Block" of material 20111 does not allow external procurement      ME           053          E
    08/06/2009 08:11:55 Purchase order still contains faulty items                                       MEPO          000          E
    08/06/2009 08:11:55 Job finished                                                                      00           517          S
    Edited by: bhavani prasad kotharu on Aug 6, 2009 3:09 PM

    HERE IS THE CODE OF THE PROGRAM, WE R JUST PASSING SOME PO DATA TO THE BAPI_PO_CREATE1,ON RUNNING THIS PROGRAM IN BACKGROUND SAME SYSTEM MESSAGES ARE APPEARED MULTIPLE TIMES,----
    REPORT zzztest.
    DATA :    lwa_bapimepoheader TYPE bapimepoheader
             ,lwa_bapimepoheaderx TYPE bapimepoheaderx
             ,li_bapimepoitem TYPE STANDARD TABLE OF bapimepoitem
             ,lwa_bapimepoitem TYPE  bapimepoitem
             ,li_bapimepoitemx TYPE STANDARD TABLE OF bapimepoitemx
             ,lwa_bapimepoitemx TYPE bapimepoitemx
             ,li_conditions TYPE STANDARD TABLE OF komv
             ,li_return TYPE STANDARD TABLE OF bapiret2
             , n TYPE c
    PARAMETERS: p1 TYPE c AS CHECKBOX.
    IF p1 = 'X'.
      lwa_bapimepoheader-doc_type = 'NB'.
      lwa_bapimepoheader-purch_org = 'NA00'.
      lwa_bapimepoheader-pur_group = 'C02'.
      lwa_bapimepoheaderx-doc_type = 'X'.
      lwa_bapimepoheaderx-purch_org = 'X'.
      lwa_bapimepoheaderx-pur_group = 'X'.
      lwa_bapimepoitem-po_item = '10'.
      lwa_bapimepoitem-material = '000000000000020111'.
      lwa_bapimepoitem-plant = 'CA01'.
      lwa_bapimepoitem-vend_mat = '1000'.
      lwa_bapimepoitem-quantity = '10'.
      lwa_bapimepoitem-orderpr_un = 'M'.
      lwa_bapimepoitem-no_more_gr = 'K'.
      lwa_bapimepoitem-agreement = '4600000095'.
      lwa_bapimepoitem-agmt_item = '10'.
      lwa_bapimepoitem-pricedate = 'X'.
      lwa_bapimepoitem-price_date = '20071030'.
      lwa_bapimepoitem-no_rounding = 'X'.
      APPEND lwa_bapimepoitem TO li_bapimepoitem.
      lwa_bapimepoitemx-po_item = '10'.
      lwa_bapimepoitemx-po_itemx = 'X'.
      lwa_bapimepoitemx-po_itemx = 'X'.
      lwa_bapimepoitemx-material = 'X'.
      lwa_bapimepoitemx-plant = 'X'.
      lwa_bapimepoitemx-quantity = 'X'.
      lwa_bapimepoitemx-po_unit = 'X'.
      lwa_bapimepoitemx-orderpr_un = 'X'.
      lwa_bapimepoitemx-acctasscat = 'X'.
      lwa_bapimepoitemx-agreement = 'X'.
      lwa_bapimepoitemx-agmt_item = 'X'.
      lwa_bapimepoitemx-pricedate = 'X'.
      lwa_bapimepoitemx-price_date = 'X'.
      lwa_bapimepoitemx-preq_no = 'X'.
      lwa_bapimepoitemx-preq_item = 'X'.
      lwa_bapimepoitemx-no_rounding = 'X'.
      APPEND lwa_bapimepoitemx TO li_bapimepoitemx.
    DATA: lo_msg_handler  TYPE REF TO cl_message_handler_mm.
      CALL METHOD cl_message_handler_mm=>get_handler
        IMPORTING
          ex_handler = lo_msg_handler.
      lo_msg_handler->remove_all( ).
      lo_msg_handler->cleanup( ).
      CALL FUNCTION 'BAPI_PO_CREATE1' "in background task
           EXPORTING
             poheader   = lwa_bapimepoheader
             poheaderx  = lwa_bapimepoheaderx
             testrun    = 'X'
           NO_MESSAGING = c_x
           NO_MESSAGE_REQ = c_x
             no_authority = 'X'
           IMPORTING
             expheader  = lwa_bapimepoheader
           TABLES
             return     = li_return
             poitem     = li_bapimepoitem
             poitemx    = li_bapimepoitemx
             conditions = li_conditions.
    ENDIF.
    Edited by: bhavani prasad kotharu on Aug 6, 2009 3:38 PM

  • How do you take off reseiving messages on multiple devices using the same apple account

    How do you take off reseiving messages on multiple devices using the same apple account?

    Go to Settings>Messages>Send and Receive on all but one device and add a unique email address on each device and delete the commone Apple ID email device
    If there is also an iPhone with iOS 6 associated with the Apple ID, uncheck the phone number on all but the phone.

  • TS2755 keep receiving the same text message multiple times, at the same time of the night. How can I stop this?Thabnks

    Hi
    I keep on receiving the same text message multiple times and at around the same time each night. Any idea how I can stop this happening? The text messages are originating from to separate Saudi Arabian mobile numbers. Both these people are listed in my contacts so do you think if I delete their names it might stop the texts coming htrough each night?
    Cheers

    Deleting the people from your contacts will not stop the messages. Have you tried talking to the people and finding out if they're sending you messages? You could try contacting your carrier and finding out what blocking services they offer. However, theat would block all messages from those people.

  • I use a gmail account for my mail.  When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file.  help

    I use a gmail account for my mail.  When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file.  help

    Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name.  Make sure the settings there are correct.

  • Send a message to multiple receivers from the same service

    Hi all,
    I registered on SAP community several months ago, I found many good hints and solutions to some of the problems encountered in XI and for which I thank you, but this is the first time I address a question to a common issue, written already about.
    I have a scenario with 1 File FTP sender adapter and 2 Receiver adapters:1 FTP adapter and 1 MAIL adapter. The input message is sent to one of these receiver adapters based on the value taken by a specific field from the input message.The receiver adapters are using the same party and service.
    The requirement is to solve this without using BPM.
    I have read "multiple receiver" issue related blogs and tried to use the standard receiver determination. Thus, I have 1 Sender Agreement, 2 Receiver agreements (one for FTP and one for MAIL), 1 Interface Determinations (with the 2 inbound interfaces and interface mappings corresponding to FTP and MAIL output) and 1 standard Receiver Determination where I added the party and service twice and specified for both the condition. The condition is based on XPath, is correct.
    In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
    Can you please give me some feedback on how to solve this problem? It is rather urgent.
    I have also tried to create 2 Interface Determinations and have 2 Receiver Determinations, each one with the right condition. But I get the same error message.
    Is the problem due to the fact that I don't use 2 different services ?
    If you know how this can be solved without using BPM, please reply.
    Thanks a lot,
    Alina hudea

    > In sxmb_moni, I get the error: "No receiver could be determined". If I remove one of the conditions, then the output is sent on both receiver adapters, instead of only the one that fulfills the condition.
    Hi,
    I think the problem in Receive Determination. As you mentioned when you remove one of the condition then it works..
    What I concluded is, I think while creating your Receiver Determination for multiple receivers you added the receivers by pressing the plus sign and that means you are using mulitiple receivers with "AND" condition, so in this condition when both the condition will be true then only you will get success.
    What you can do is, Just remove one of the receivers and then add it by pressing the "OR" symbol i.e. by pressing this ( [ ] ) symbol and put your conditions as you like.
    I hope what I have concluded is correct.. 
    Regards,
    Sarvesh

  • IPhone keeps sending the same text message multiple times in a row.

    My iphone (4s) keeps sending people the same text message multiple times (2-4) a few seconds inbetween.  Sometimes it will tell me that there the message failed, but they still recieve it multiple times.  I've already tried deleting the message tread and reset network settings.  Nobody who has an iphone has said anything to me about it yet, only people with android.  

    It's a carrier issue. I have AT&T and had this issue with my friend (who had an Android) and my mother (who had a feature phone). Both of them have Verizon for service and I'm thinking the issue was on Verizon's end. They both just dealt with it as we tried all sorts of things to get this sorted out (other than contacting Verizon directly) and had no luck.
    They've both switched to iPhones so it's a moot point for us now, at least.
    ~Lyssa

  • Droid X - Receiving same Txt message multiple times, repeatedly

    After an upgrade back in September/October...  I started receiving the same text message multiple times.  It doesn't happen every time.  For example, my Husband responds with "OK" and I receive the same message 5 times over a period of 4-5 hours. 

    Welcome ...  SEARCH is your friend in this forum as most issues have already been reported.  I did a quick search on "Multiple" and this popped up:
    http://community.vzw.com/t5/DROID-X-by-Motorola/Receiving-multiple-duplicate-text-messages-since-latest-update/m-p/685893#M31790
    There may be others as well. 

  • Same error message getting added multiple times on clicking of row.

    I have an application table where I can add an employee. At EO level, I have kept the unique key validator so that user cannot add the same employee again in the table.
    So, now if user try to add the same employee which is already added in the table, then when I click on some other row (i.e on row change), an error message comes (which we have set at the EO level).
    Now if you keep on clicking this row, the same error messages will keep on adding in the error box which is displayed. So, its like if you click the same row 5 times, the same error message will be shown 5 times in the error dialog box.
    But the moment you click on some other row, it works fine i.e it shows you the error message only once which is what I want. So, is there any way to solve this issue?

    my jdev version is 11.1.1.6.0
    And sorry but I didnt get your 2nd question regarding af:message tag! The message is coming from some bundle and we have set the message at EO level.

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • Using Messages with Multiple Users and Multiple Computers

    I have two users who share two different computers, switching between them during the day.
    I'd like to use messages on them for us to send text messages in the office, however, it asks them on logging in (most, but not everytime) to re-enter their apple id password.  It seems that using icloud for messages among multiple computers like this isn't good.  its like it wants each computers to be linked with a particular user, and doesn't like it that the users are moving around from computer to computer
    Options to avoid this nuisance?
    1.  Would bonjour messaging work, and then just remove the icloud account from messages?
    2.  How about setting up the message server on my ML Server, would that avoid this problem?

    I'd say probably make sure that in the advanced tab under edit>preferences you should make sure they both point to the same file.
    My turn now, how to i post a thread, there's no button.

  • Can I use the same Apple ID for multiple devices

    Can I use the same Apple ID for multiple devices?

    Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
    How to use multiple iPhone, iPad, or iPod devices with one computer
    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

  • Can we use the same credit card for multiple customers???

    One of my clients has a requirement where they need to use the same Credit Card number for multiple customers. I have looked into the possibility of using the 'Alternate Payer' functionality but besides that is there any other way SAP can be tweaked to accept the same credit card on multiple customer accounts?
    Thanks in advance for any help or guidance you may provide.
    SJ

    I know SAP throws an error message which is why I was looking for a solution. I do have a work around. By pointing to an 'Alternate Payer' on the Payment Transactions tab on the customer master you can have a credit card on this alternate payer master record and use this payer on several other customers. All these customers will not have any credit card stored on their master records.
    Thanks for your response though.

Maybe you are looking for