Same CSS but slightly wider layout

I built a simple website with Dreamweaver CS6 at http://www.ottawapatentagency.com The website has only 1 CSS file specifiying a 2 colum layout with a vertical spry menu, but a few pages have a slightly wider layout. For example, the page 'Our Services' is slightly wider than the home page. This widening happens with Internet Explorer and Safari. Only Google Chrome renders the pages correctly, i.e. the page 'Our Services' has the same width as the home page, as it should be.
Anyone has a solution?

Your horizontal scrollbar on longer pages acts to widen them.
Force a scrollbar on all pages with CSS
html, body {
height: 100%;
margin: 0 0 1px;
padding: 0;

Similar Messages

Since this morning all text in firefox look slightly different - I think it still uses the same font, but renders it differently.

Since this morning all text in firefox looks slightly different - I think it still uses the same font, but renders it differently!? I would like to have it changed back to what it was. Any help is welcome.
Some facts:
- Happens only in Firefox (IE & Chrome still look the same)
- Already did a reset to defaults
I'm using the latest version of Firefox
Screenshot can be found here: [http://www.ka-pow.net/media/images/firefoxissue.jpg link text]

Reset the page zoom on pages that cause problems: View/Beeld > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
Use "Firefox > Options" instead of "Tools/Extra > Options" if the menu bar is hidden.

How to place two narrow portlets in the same row of a wide column

Hi,
How to place two narrow portlets in the same row of a wide column.
Im using ALUI 6.1
Thanks in advance
sandeep

As I understand there is no easy way to do it now. I guess in theory that can be done by customizing ALUI page layout source code, but this is significant efforts. Correct me if there is more easy way to do it.
Edited by Bryazgin at 05/23/2007 7:32 AM

CSS - Table width breaking layout

I have a CSS issue with page layout. I have created a layout where I have a main wrapper that encompasses the page. Inside the wrapper are three sections: header, content, and footer. These all adjust 100% to the width of the browser. I will have tables of varying sizes within the content area. My issue is that when the browser goes to a size smaller than the width of the table, the content area will scroll to the right, but the rest of the areas will not stay at the same width as the content area. The result is that the header and footer will remain at 100% in the viewable area, but you have to scroll to the right to see the rest of the information. This breaks the layout. What I would like to see is that the header and the footer will always match the width of the content area and so if a table happens to push to the right, the header and footer will always match it. Here is a link to an example: http://www.artomicblast.com/csstest/interior.html.
You'll see that if you have the browser filling up the whole screen, everything looks fine. As you start adjusting the size down, the center section will reach a point where you get a scrollbar and it breaks out of the width of the screen so that you'll see the header and footer to the left, and it sticking out to the right.
Is there a way to make it to where the outside wrapper will keep everything contained no matter the size of the table in the content area?
Thanks!

I have a CSS issue with page layout. I have created a layout where I have a main wrapper that encompasses the page. Inside the wrapper are three sections: header, content, and footer. These all adjust 100% to the width of the browser. I will have tables of varying sizes within the content area. My issue is that when the browser goes to a size smaller than the width of the table, the content area will scroll to the right, but the rest of the areas will not stay at the same width as the content area. The result is that the header and footer will remain at 100% in the viewable area, but you have to scroll to the right to see the rest of the information. This breaks the layout. What I would like to see is that the header and the footer will always match the width of the content area and so if a table happens to push to the right, the header and footer will always match it. Here is a link to an example: http://www.artomicblast.com/csstest/interior.html.
You'll see that if you have the browser filling up the whole screen, everything looks fine. As you start adjusting the size down, the center section will reach a point where you get a scrollbar and it breaks out of the width of the screen so that you'll see the header and footer to the left, and it sticking out to the right.
Is there a way to make it to where the outside wrapper will keep everything contained no matter the size of the table in the content area?
Thanks!

How to link child report in same reprot but in different tab

Hi all i nXIR2
iam able to pass parameters to child report in different report how to pass parameters and open it in same report in different tab?
below link iam able to open in another report
="<a href=\"<Servername>:8080/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?&stype=wid&Refresh=N&sWindow=New&sDocName=Details3&lsS2)Month:="If(DrillFilters([Month])="";"All Month";DrillFilters([Month]))"&lsS1)Year:="If(DrillFilters([Year])="";"All Year";DrillFilters([Year]))"&lsS4)Account:="If(DrillFilters([Cd])="";"All Codes";DrillFilters([Cd]))+"\">List</a>"
any ideas please
Thanks

Hi Arjun,
There is no hiding or conditional hiding tab functionality in DeskI, which would serve the purpose of your need.
One option could be to open up the child report in the same window rather a new window.
Thanks for the reply
I dont want to hide any tab..
i want to open a child report in same report in another tab... in web i
i can use in same window but..... child report i needed have different columns...

2 CSS Questions on my layout

Hi everyone, I have two CSS questions regarding my layout.
First off, it is located at:
http://robles.clunet.edu/~ssmi/tsr9/tsr9template.html
The CSS is embeded in the file (it will linked from a
different file once I am done with this design, but beside the
point)
My first question is about how I can keep the right top image
from being bumped down to the next line when the window is resized.
I want it to squeeze into some, but then at a point have the scroll
bars kick in.
My other question is how I could make the title image "The
Scott Report" centered between the two left and right images up
top.
Could anyone help out?
Thanks a lot!

Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

I have an index page that does not correctly load css, but css works on all other pages in the site.

http://www.boulderridgecondos.com/ does not load the css correctly, but ALL other pages in the site do load the css correctly. There is nothing different (that I can identify) between the pages.
http://www.boulderridgecondos.com/news.htm
I am guessing that there is something wrong in the css, I inherited this site and have gone over the css but can't find a issue that would cause this to occur.
Any help or suggestions to research something would be appreciated.

That page is saved as UTF-16 (Content-Type: text/html (BOM UTF-16, litte-endian)) in your text editor. The CSS file is send as ISO-8859-1. Firefox likes to see all files in the same encoding. The other pages are send as ISO-8859-1 and thus use that CSS file. You will have to re-save that page as ISO-8859-1 and upload that corrected version.

Multiple links with same css style applied... showing up different on site

Hi,
I have applied the same CSS style, biolinks, to all of the links to peoples biographys on this page, but for some reason, they all show up different on the site? Why? Help!
http://www.healthdimensionsgroup.com/our_team_management.html

No... you have different styles on the two pages.
There is a "biolink" class applied to the Span on the second page that isn't applied to any links on the first.
That and the missing class on LYNN PETERSON are the only differences I see right off.
See the differences here?
<td width="561" align="left" valign="top" class="biolink"><a href="team/sergei-shvetzoff.html" title="Sergei Shvetzoff" class="biolink">SERGEI SHVETZOFF</a></td> (second page - 3 applications of "biolink" class) vs.
<td width="515" align="left" valign="top" class="biolink"><a href="team/karyn-price.html" title="Karyn Price"class="biolink">KARYN PRICE</a></td> ( first page - two applications of "biolink" class) vs.
<td width="515" align="left" valign="top" class="biolink"><a href="team/lynn-peterson.html" title="Lynn Peterson">LYNN PETERSON</a></td> (first page - one application of "biolink" class)
three different styles once the browser interprets them… any browser.
Also:
biolink {
 font-family: Georgia, "Times New Roman", Times, serif;
 color: #CBB677;
 text-decoration: none;
a.biolink:hover {
 color: #EBE3CB;
 font-size: 18px;
 font-family: Georgia, "Times New Roman", Times, serif;
 text-decoration: none;
.biolink {
 color: #CBB677;
 font-family: Georgia, "Times New Roman", Times, serif;
 font-size: 18px;
 text-decoration: none;
is redundant in your application of it with the same class applied to the td, the link and the span…
use:
td a.biolink {
 font-family: Georgia, "Times New Roman", Times, serif;
 color: #CBB677;
 font-size: 18px;
 text-decoration: none;
td a.biolink:hover {
 color: #EBE3CB;
 font-size: 18px;
 font-family: Georgia, "Times New Roman", Times, serif;
 text-decoration: none;
and ONLY apply the "biolink" class to the link <a href>, nowhere else.

How can I let firefox save usernames/passwords for multiple subdomains that use the same username but different passwords?

on a particular website that has sub domains I have multiple accounts with the same name but different password. Firefox seems only able to save one of them, because they are on the same site.

"Things"? What things? Apps for keeping track of when to change cat litter? 30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant? Videos on the best way to make Christmas cake?

When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?

When importing songs of a same album but different artist iTunes will separate the artists. How can I bring all together in the same album?

Generally setting a common Album Artist will fix things. For deeper problems see Grouping tracks into albums.
tt2

String objects with the same string pointing to the same place but?

Hi,
Here is a simple sample
String str1 = "a";
String str2 = "a";I understand that in Java str1 and str2 pointing to the same place in memory and Java compiler wouldn't save the string "a" in two different places in memory. Am I right?
If so, if the value of str1 changes to something else as following:
String str1 = "a";
String str2 = "a";
str1 = "b";why str2 which has been pointing to the same place as str1 before is still containing ?a? and not ?b????
Thanks!

Maria1990 wrote:
Hi,
Here is a simple sample
String str1 = "a";
String str2 = "a";I understand that in Java str1 and str2 pointing to the same place in memory and Java compiler wouldn't save the string "a" in two different places in memory. Am I right?Correct.
Maria1990 wrote:
If so, if the value of str1 changes to something else as following:
String str1 = "a";
String str2 = "a";
str1 = "b";why str2 which has been pointing to the same place as str1 before is still containing ?a? and not ?b????Because str2 is pointing to the same "a", but it is not pointing to str1.
This is what happens:
String str1 = "a";
/*                 +---+
         str1 ---->| a |
                   +---+
String str2 = "a";
/*                 +---+
         str1 --+->| a |
                | +---+
                |
         str2 --+
NOT:
                   +---+
     +-> str1 ---->| a |
     |             +---+
     |
     +- str2
str1 = "b";
                   +---+
             +---->| b |
             |     +---+
             |
             |     +---+
        str1-+ +->| a |
                | +---+
                |
         str2 --+
*/

I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN .

HI All,
I have a Problem with Romming Between SSIDs withing the same WLC but with deferent VLAN . the WLC are providing the HQ and one of the Branches the Wireless services .
Am using all the available 9 SSIDs at the HQ , and am using only 4 of it at the Brnche.
The problem that i have are happening only at the Branch office as i cant room between the SSIDs within Diferent VLANs but i can do it with the one that pointing to the same VLAN. Once the client ( Laptop/Phone ) connected to one of the SSIDs. it imposiible to have him connected to the other ones with Different VLAN. meanwhile, It says its connected to the other SSID but its not getting IP from that pool.
here is the Show Run-Config from my WLC .. and the Problem happening between the SSID AMOBILE and ASTAFF. i have the Debug while am switching between the SSIDs if needed .
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.11.04 10:20:47 =~=~=~=~=~=~=~=~=~=~=~=
show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V01, SN: FCW1535L01G
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.235.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27
Build Type....................................... DATA + WPS
System Name...................................... WLAN Controller 5508
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 10.125.18.15
Last Reset....................................... Software reset
System Up Time................................... 41 days 5 hrs 14 mins 42 secs
System Timezone Location......................... (GMT -5:00) Eastern Time (US and Canada)
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... US - United States
--More or (q)uit current module or <ctrl-z> to abort
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +20 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 10
Number of Active Clients......................... 61
Burned-in MAC Address............................ 30:E4:DB:1B:99:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 12
Press Enter to continue or <ctrl-z> to abort
AP Bundle Information
Primary AP Image Size
ap3g1 5804
ap801 5192
ap802 5232
c1100 3096
c1130 4972
c1140 4992
c1200 3364
c1240 4812
c1250 5512
c1310 3136
c1520 6412
c3201 4324
c602i 3716
Secondary AP Image Size
ap801 4964
c1100 3036
--More or (q)uit current module or <ctrl-z> to abort
c1130 4884
c1140 4492
c1200 3316
c1240 4712
c1250 5064
c1310 3084
c1520 5244
c3201 4264
Press Enter to continue or <ctrl-z> to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
 case-check ...........Enabled
 consecutive-check ....Enabled
 default-check .......Enabled
 username-check ......Enabled
Press Enter to continue or <ctrl-z> to abort
Network Information
RF-Network Name............................. OGR
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
--More or (q)uit current module or <ctrl-z> to abort
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Fast SSID Change ........................... Enabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or <ctrl-z> to abort
Port Summary
 STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
1 Normal Forw Enable Auto 1000 Full Up Enable N/A 1000BaseTX
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A Not Present
4 Normal Disa Enable Auto Auto Down Enable N/A Not Present
5 Normal Disa Enable Auto Auto Down Enable N/A Not Present
6 Normal Disa Enable Auto Auto Down Enable N/A Not Present
7 Normal Disa Enable Auto Auto Down Enable N/A Not Present
8 Normal Disa Enable Auto Auto Down Enable N/A Not Present
Press Enter to continue or <ctrl-z> to abort
AP Summary
Number of APs.................................... 8
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
KNOWLOGY_DC01 disabled -
KNOWLOGY_DC02 disabled -
--More or (q)uit current module or <ctrl-z> to abort
KN1252_AP01 disabled -
KN1252_AP02 disabled -
Anham_AP03 disabled -
ANHAM_AP01 disabled -
ANHAM_AP04 disabled -
ANHAM_AP02 disabled -
Press Enter to continue or <ctrl-z> to abort
AP Location
Total Number of AP Groups........................ 3
Site Name........................................ ANHAM8075
Site Description................................. ANHAM 8075 Location
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Anham_AP03 2 AIR-LAP1142N-A-K9 70:81:05:88:15:b5 default location 1 US 1
ANHAM_AP01 2 AIR-LAP1142N-A-K9 70:81:05:b0:e4:62 Small Conference 1 US 1
ANHAM_AP04 2 AIR-LAP1131AG-A-K9 00:1d:45:86:e1:b8 Conference room 1 US 1
ANHAM_AP02 2 AIR-LAP1142N-A-K9 70:81:05:96:7a:49 Copy Room 1 US 1
Site Name........................................ Knowlogy_DC
--More or (q)uit current module or <ctrl-z> to abort
Site Description................................. DC Center Access points
WLAN ID Interface Network Admission Control Radio Policy
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KNOWLOGY_DC01 2 AIR-LAP1131AG-A-K9 00:1d:45:86:ed:4e KNOWLOGY_DC_Serv 1 US 1
KNOWLOGY_DC02 2 AIR-LAP1131AG-A-K9 00:21:d8:36:c5:c4 KNOWLOGY_DC_Serv 1 US 1
Site Name........................................ OGR
Site Description................................. 1934 OGR Office
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
7 knowlogy_ogr Disabled None
9 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
KN1252_AP01 2 AIR-LAP1252AG-A-K9 00:21:d8:ef:06:50 Knowlogy Confere 1 US 1
KN1252_AP02 2 AIR-LAP1252AG-A-K9 00:22:55:8e:2e:d4 Server Room Side 1 US 1
Site Name........................................ default-group
Site Description................................. <none>
WLAN ID Interface Network Admission Control Radio Policy
1 knowlogy_ogr Disabled None
2 knowlogy_ogr Disabled None
3 knowlogy_ogr Disabled None
4 knowlogy_ogr Disabled None
5 knowlogy_ogr Disabled None
6 knowlogy_ogr Disabled None
7 knowlogy_ogr Disabled None
8 knowlogy_ogr Disabled None
--More or (q)uit current module or <ctrl-z> to abort
9 knowlogy_ogr Disabled None
10 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Press Enter to continue or <ctrl-z> to abort
AP Config
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch IP Address.................. 10.125.18.15
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abortIP Address.................. 10.125.18.15
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
 Native ID :..................................... 22
 WLAN 2 :........................................ 21
 WLAN 4 :........................................ 25
 WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
 Radio Type................................... RADIO_TYPE_80211b
 Administrative State ........................ ADMIN_ENABLED
 Operation State ............................. UP
 Radio Role .................................. ACCESS
 CellId ...................................... 0
 Station Configuration
 Configuration ............................. AUTOMATIC
 Number Of WLANs ........................... 3
 Medium Occupancy Limit .................... 100
 CFP Period ................................ 4
 CFP MaxDuration ........................... 60
 BSSID ..................................... 00:1d:71:09:8f:90
 Operation Rate Set
 1000 Kilo Bits........................... MANDATORY
 2000 Kilo Bits........................... MANDATORY
 5500 Kilo Bits........................... MANDATORY
 11000 Kilo Bits.......................... MANDATORY
 Beacon Period ............................. 100
 Fragmentation Threshold ................... 2346
 Multi Domain Capability Implemented ....... TRUE
--More or (q)uit current module or <ctrl-z> to abort
 Multi Domain Capability Enabled ........... TRUE
 Country String ............................ US
 Multi Domain Capability
 Configuration ............................. AUTOMATIC
 First Chan Num ............................ 1
 Number Of Channels ........................ 11
 MAC Operation Parameters
 Configuration ............................. AUTOMATIC
 Fragmentation Threshold ................... 2346
 Packet Retry Limit ........................ 64
 Tx Power
 Num Of Supported Power Levels ............. 8
 Tx Power Level 1 .......................... 20 dBm
 Tx Power Level 2 .......................... 17 dBm
 Tx Power Level 3 .......................... 14 dBm
 Tx Power Level 4 .......................... 11 dBm
 Tx Power Level 5 .......................... 8 dBm
 Tx Power Level 6 .......................... 5 dBm
 Tx Power Level 7 .......................... 2 dBm
 Tx Power Level 8 .......................... -1 dBm
--More or (q)uit current module or <ctrl-z> to abort
 Tx Power Configuration .................... AUTOMATIC
 Current Tx Power Level .................... 1
 Phy DSSS parameters
 Configuration ............................. AUTOMATIC
 Current Channel ........................... 11
 Extension Channel ......................... NONE
 Channel Width.............................. 20 Mhz
 Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
 Current CCA Mode .......................... 0
 ED Threshold .............................. -50
 Antenna Type............................... INTERNAL_ANTENNA
 Internal Antenna Gain (in .5 dBi units).... 8
 Diversity.................................. DIVERSITY_ENABLED
 Performance Profile Parameters
 Configuration ............................. AUTOMATIC
 Interference threshold..................... 10 %
 Noise threshold............................ -70 dBm
 RF utilization threshold................... 80 %
 Data-rate threshold........................ 1000000 bps
 Client threshold........................... 12 clients
 Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or <ctrl-z> to abort
 Coverage exception level................... 25 %
 Client minimum exception level............. 3 clients
 Rogue Containment Information
 Containment Count............................ 0
 CleanAir Management Information
 CleanAir Capable......................... No
Cisco AP Identifier.............................. 6
Cisco AP Name.................................... KNOWLOGY_DC01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:1d:45:86:ed:4e
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.100
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................ wireless.knowlogy.com
Primary Cisco Switch Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1134T0QG
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
 Native ID :..................................... 22
 WLAN 2 :........................................ 21
 WLAN 4 :........................................ 25
 WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 19 m 18 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:33 2013
Join Taken Time.................................. 0 days, 00 h 10 m 47 s
Attributes for Slot 1
 Radio Type................................... RADIO_TYPE_80211a
 Radio Subband................................ RADIO_SUBBAND_ALL
 Administrative State ........................ ADMIN_ENABLED
 Operation State ............................. UP
 Radio Role .................................. ACCESS
 CellId ...................................... 0
 Station Configuration
 Configuration ............................. AUTOMATIC
 Number Of WLANs ........................... 3
 Medium Occupancy Limit .................... 100
 CFP Period ................................ 4
 CFP MaxDuration ........................... 60
 BSSID ..................................... 00:1d:71:09:8f:90
 Operation Rate Set
 6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
 9000 Kilo Bits........................... SUPPORTED
 12000 Kilo Bits.......................... MANDATORY
 18000 Kilo Bits.......................... SUPPORTED
 24000 Kilo Bits.......................... MANDATORY
 36000 Kilo Bits.......................... SUPPORTED
 48000 Kilo Bits.......................... SUPPORTED
 54000 Kilo Bits.......................... SUPPORTED
 Beacon Period ............................. 100
 Fragmentation Threshold ................... 2346
 Multi Domain Capability Implemented ....... TRUE
 Multi Domain Capability Enabled ........... TRUE
 Country String ............................ US
 Multi Domain Capability
 Configuration ............................. AUTOMATIC
 First Chan Num ............................ 36
 Number Of Channels ........................ 20
 MAC Operation Parameters
 Configuration ............................. AUTOMATIC
 Fragmentation Threshold ................... 2346
 Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
 Tx Power
 Num Of Supported Power Levels ............. 7
 Tx Power Level 1 .......................... 15 dBm
 Tx Power Level 2 .......................... 14 dBm
 Tx Power Level 3 .......................... 11 dBm
 Tx Power Level 4 .......................... 8 dBm
 Tx Power Level 5 .......................... 5 dBm
 Tx Power Level 6 .......................... 2 dBm
 Tx Power Level 7 .......................... -1 dBm
 Tx Power Configuration .................... AUTOMATIC
 Current Tx Power Level .................... 1
 Phy OFDM parameters
 Configuration ............................. AUTOMATIC
 Current Channel ........................... 44
 Extension Channel ......................... NONE
 Channel Width.............................. 20 Mhz
 Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
 ......................................... 104,108,112,116,132,136,140,
 ......................................... 149,153,157,161
 TI Threshold .............................. -50
 Antenna Type............................... INTERNAL_ANTENNA
 Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
 Diversity.................................. DIVERSITY_ENABLED
 Performance Profile Parameters
 Configuration ............................. AUTOMATIC
 Interference threshold..................... 10 %
 Noise threshold............................ -70 dBm
 RF utilization threshold................... 80 %
 Data-rate threshold........................ 1000000 bps
 Client threshold........................... 12 clients
 Coverage SNR threshold..................... 16 dB
 Coverage exception level................... 25 %
 Client minimum exception level............. 3 clients
 Rogue Containment Information
 Containment Count............................ 0
 CleanAir Management Information
 CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
--More or (q)uit current module or <ctrl-z> to abort
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
 Native ID :..................................... 22
 WLAN 2 :........................................ 21
 WLAN 4 :........................................ 25
 WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
--More or (q)uit current module or <ctrl-z> to abort
Attributes for Slot 0
 Radio Type................................... RADIO_TYPE_80211b
 Administrative State ........................ ADMIN_ENABLED
 Operation State ............................. UP
 Radio Role .................................. ACCESS
 CellId ...................................... 0
 Station Configuration
 Configuration ............................. AUTOMATIC
 Number Of WLANs ........................... 3
 Medium Occupancy Limit .................... 100
 CFP Period ................................ 4
 CFP MaxDuration ........................... 60
 BSSID ..................................... 00:22:55:a5:0c:30
 Operation Rate Set
 1000 Kilo Bits........................... MANDATORY
 2000 Kilo Bits........................... MANDATORY
 5500 Kilo Bits........................... MANDATORY
 11000 Kilo Bits.......................... MANDATORY
 Beacon Period ............................. 100
 Fragmentation Threshold ................... 2346
 Multi Domain Capability Implemented ....... TRUE
 Multi Domain Capability Enabled ........... TRUE
--More or (q)uit current module or <ctrl-z> to abort
 Country String ............................ US
 Multi Domain Capability
 Configuration ............................. AUTOMATIC
 First Chan Num ............................ 1
 Number Of Channels ........................ 11
 MAC Operation Parameters
 Configuration ............................. AUTOMATIC
 Fragmentation Threshold ................... 2346
 Packet Retry Limit ........................ 64
 Tx Power
 Num Of Supported Power Levels ............. 8
 Tx Power Level 1 .......................... 20 dBm
 Tx Power Level 2 .......................... 17 dBm
 Tx Power Level 3 .......................... 14 dBm
 Tx Power Level 4 .......................... 11 dBm
 Tx Power Level 5 .......................... 8 dBm
 Tx Power Level 6 .......................... 5 dBm
 Tx Power Level 7 .......................... 2 dBm
 Tx Power Level 8 .......................... -1 dBm
 Tx Power Configuration .................... AUTOMATIC
--More or (q)uit current module or <ctrl-z> to abort
 Current Tx Power Level .................... 1
 Phy DSSS parameters
 Configuration ............................. AUTOMATIC
 Current Channel ........................... 1
 Extension Channel ......................... NONE
 Channel Width.............................. 20 Mhz
 Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
 Current CCA Mode .......................... 0
 ED Threshold .............................. -50
 Antenna Type............................... INTERNAL_ANTENNA
 Internal Antenna Gain (in .5 dBi units).... 8
 Diversity.................................. DIVERSITY_ENABLED
 Performance Profile Parameters
 Configuration ............................. AUTOMATIC
 Interference threshold..................... 10 %
 Noise threshold............................ -70 dBm
 RF utilization threshold................... 80 %
 Data-rate threshold........................ 1000000 bps
 Client threshold........................... 12 clients
 Coverage SNR threshold..................... 12 dB
 Coverage exception level................... 25 %
--More or (q)uit current module or <ctrl-z> to abort
 Client minimum exception level............. 3 clients
 Rogue Containment Information
 Containment Count............................ 0
 CleanAir Management Information
 CleanAir Capable......................... No
Cisco AP Identifier.............................. 3
Cisco AP Name.................................... KNOWLOGY_DC02
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:36:c5:c4
IP Address Configuration......................... DHCP
IP Address....................................... 10.22.1.101
Gateway IP Addr.................................. 10.22.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ KNOWLOGY_DC_ServerRoom
--More or (q)uit current module or <ctrl-z> to abort
Cisco AP Group Name.............................. Knowlogy_DC
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
--More or (q)uit current module or <ctrl-z> to abort
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131AG-A-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1230T24F
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
 Native ID :..................................... 22
 WLAN 2 :........................................ 21
 WLAN 4 :........................................ 25
 WLAN 3 :........................................ 25
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or <ctrl-z> to abort
AP Up Time....................................... 48 days, 20 h 24 m 41 s
AP LWAPP Up Time................................. 40 days, 13 h 58 m 18 s
Join Date and Time............................... Tue Sep 24 21:24:35 2013
Join Taken Time.................................. 0 days, 00 h 10 m 48 s
Attributes for Slot 1
 Radio Type................................... RADIO_TYPE_80211a
 Radio Subband................................ RADIO_SUBBAND_ALL
 Administrative State ........................ ADMIN_ENABLED
 Operation State ............................. UP
 Radio Role .................................. ACCESS
 CellId ...................................... 0
 Station Configuration
 Configuration ............................. AUTOMATIC
 Number Of WLANs ........................... 3
 Medium Occupancy Limit .................... 100
 CFP Period ................................ 4
 CFP MaxDuration ........................... 60
 BSSID ..................................... 00:22:55:a5:0c:30
 Operation Rate Set
 6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
 9000 Kilo Bits........................... SUPPORTED
 12000 Kilo Bits.......................... MANDATORY
 18000 Kilo Bits.......................... SUPPORTED
 24000 Kilo Bits.......................... MANDATORY
 36000 Kilo Bits.......................... SUPPORTED
 48000 Kilo Bits.......................... SUPPORTED
 54000 Kilo Bits.......................... SUPPORTED
 Beacon Period ............................. 100
 Fragmentation Threshold ................... 2346
 Multi Domain Capability Implemented ....... TRUE
 Multi Domain Capability Enabled ........... TRUE
 Country String ............................ US
 Multi Domain Capability
 Configuration ............................. AUTOMATIC
 First Chan Num ............................ 36
 Number Of Channels ........................ 20
 MAC Operation Parameters
 Configuration ............................. AUTOMATIC
 Fragmentation Threshold ................... 2346
 Packet Retry Limit ........................ 64
--More or (q)uit current module or <ctrl-z> to abort
 Tx Power
 Num Of Supported Power Levels ............. 7
 Tx Power Level 1 .......................... 15 dBm
 Tx Power Level 2 .......................... 14 dBm
 Tx Power Level 3 .......................... 11 dBm
 Tx Power Level 4 .......................... 8 dBm
 Tx Power Level 5 .......................... 5 dBm
 Tx Power Level 6 .......................... 2 dBm
 Tx Power Level 7 .......................... -1 dBm
 Tx Power Configuration .................... AUTOMATIC
 Current Tx Power Level .................... 1
 Phy OFDM parameters
 Configuration ............................. AUTOMATIC
 Current Channel ........................... 36
 Extension Channel ......................... NONE
 Channel Width.............................. 20 Mhz
 Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
 ......................................... 104,108,112,116,132,136,140,
 ......................................... 149,153,157,161
 TI Threshold .............................. -50
 Antenna Type............................... INTERNAL_ANTENNA
 Internal Antenna Gain (in .5 dBi units).... 8
--More or (q)uit current module or <ctrl-z> to abort
 Diversity.................................. DIVERSITY_ENABLED
 Performance Profile Parameters
 Configuration ............................. AUTOMATIC
 Interference threshold..................... 10 %
 Noise threshold............................ -70 dBm
 RF utilization threshold................... 80 %
 Data-rate threshold........................ 1000000 bps
 Client threshold........................... 12 clients
 Coverage SNR threshold..................... 16 dB
 Coverage exception level................... 25 %
 Client minimum exception level............. 3 clients
 Rogue Containment Information
 Containment Count............................ 0
 CleanAir Management Information
 CleanAir Capable......................... No
Press Enter to continue or <ctrl-z> to abort
Cisco AP Identifier.............................. 5
Cisco AP Name.................................... KN1252_AP01
Country code..................................... US - United States
Regulatory Domain allowed by Country............. 802.11bg:-A 802.11a:-A
AP Country code.................................. US - United States
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:ef:06:50
IP Address Configuration......................... DHCP
IP Address....................................... 10.125.18.101
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 10.125.18.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ Knowlogy Conference Rooms Side
Cisco AP Group Name.............................. OGR
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or <ctrl-z> to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... H-Reap
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.235.0
Boot Version ................................... 12.4.10.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Medium Power (15.4 W)
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1252AG-A-K9
AP Image......................................... C1250-K9W8-M
IOS Version...................................... 12.4(23c)JA5
--More or (q)uit current module or <ctrl-z> to abort
Reset Button..................................... Enabled
AP Serial Number................................. FTX122990L5
AP Certificate Type.............................. Manufacture Installed
H-REAP Vlan mode :............................... Enabled
 Native ID :..................................... 118
 WLAN 1 :........................................ 111
 WLAN 2 :........................................ 111
 WLAN 4 :........................................ 112
 WLAN 6 :........................................ 112
 WLAN 7 :........................................ 111
 WLAN 9 :........................................ 112
 WLAN 8 :........................................ 112
H-REAP Backup Auth Radius Servers :
Static Primary Radius Server.................... Disabled
Static Secondary Radius Server.................. Disabled
Group Primary Radius Server..................... Disabled
Group Secondary Radius Server................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 26 days, 00 h 24 m 39 s
--More or (q)uit current module or <ctrl-z> to abort
AP LWAPP Up Time................................. 26 days, 00 h 23 m 48 s
Join Date and Time............................... Wed Oct 9 10:59:07 2013
Join Taken Time.................................. 0 days, 00 h 00 m 50 s
Attributes for Slot 0
 Radio Type................................... RADIO_TYPE_80211n-2.4
 Administrative State ........................ ADMIN_ENABLED
 Operation State ............................. UP
 Radio Role .................................. ACCESS
 CellId ...................................... 0
 Station Configuration
 Configuration ............................. AUTOMATIC
 Number Of WLANs ........................... 7
 Medium Occupancy Limit .................... 100
 CFP Period ................................ 4
 CFP MaxDuration ........................... 60
 BSSID ..................................... 00:22:55:df:a5:90
 Operation Rate Set
 1000 Kilo Bits........................... MANDATORY
 2000 Kilo Bits........................... MANDATORY
 5500 Kilo Bits........................... MANDATORY
--More or (q)uit current module or <ctrl-z> to abort
 11000 Kilo Bits.......................... MANDATORY
 MCS Set
 MCS 0.................................... SUPPORTED
 MCS 1.................................... SUPPORTED
 MCS 2.................................... SUPPORTED
 MCS 3.................................... SUPPORTED
 MCS 4.................................... SUPPORTED
 MCS 5.................................... SUPPORTED
 MCS 6.................................... SUPPORTED
 MCS 7.................................... SUPPORTED
 MCS 8.................................... SUPPORTED
 MCS 9.................................... SUPPORTED
 MCS 10................................... SUPPORTED
 MCS 11................................... SUPPORTED
 MCS 12................................... SUPPORTED
 MCS 13................................... SUPPORTED
 MCS 14................................... SUPPORTED
 MCS 15................................... SUPPORTED
 Beacon Period ............................. 100
 Fragmentation Threshold ................... 2346
 Multi Domain Capability Implemented ....... TRUE
 Multi Domain Capability Enabled ........... TRUE
 Country String ............................ US
--More or (q)uit current module or <ctrl-z> to abort
 Multi Domain Capability
 Configuration ............................. AUTOMATIC
 First Chan Num ............................ 1
 Number Of Channels ........................ 11
 MAC Operation Parameters
 Configuration ............................. AUTOMATIC
 Fragmentation Threshold ................... 2346
 Packet Retry Limit ........................ 64
 Tx Power
 Num Of Supported Power Levels ............. 8
 Tx Power Level 1 .......................... 20 dBm
 Tx Power Level 2 .......................... 17 dBm
 Tx Power Level 3 .......................... 14 dBm
 Tx Power Level 4 ..........

Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

OBIEE report based on same criteria but different view based on filter

Hi,
I am trying to create a report in OBIEE 11.1.1.5 where In the same report using the same criteria, I can have different views which applies different filter.
Suppose, I have a report criteria as
Dim1, Dim2, Measure1, Measure 2.
I want to create two pivot view based on the same data.
One view will be showing data Dim1="Value1". The other view is duplicate of this view but will show data Dim1="Value2".
Is it possible in OBIEE?
basically what I want is work on the same dataset but different representation and show them in the same report. Please share your opinion.
Regards,
Tanveer.

Hi,
You create a new dim dummy column in criteria and in presentation level create new pivot table view use this dummy dimension column and filter with dim1=value2.
give updates on this.
Mark if Helpful/correct.
Thanks.

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

What do you mean by dynamically? When yo set up a 2D bar code field you specify which field name/value pairs you want to include, along with other parameters. But be aware that they won't work with Reader unless you Reader-enable the document with LiveCycle Reader Extensions and include the bar code usage right. It will work with Acrobat Standard/Pro.

Same CSS but slightly wider layout

Similar Messages

Maybe you are looking for