Saml authentication error-cross domains

Hi,
I am trying to setup the SAML 1.1 authentication with OWSM Policy for my SOA composite. The Web Service contains a simple hello operation which is called by an external client also BPEL service. The SOA service is just an SAML assertion consumer. I have already configured the OWSM through the Enterprise Manager and the policy for the Proxy Service:
1. Security/Security Provider Configuration/ Web Services Manager Authentication Providers section - I configured a custom keystore with private key and required trusted certificates. The saml.loginmodule is configured with sufficient control flag, valid issuer vaue and to allow virtual users (property oracle.security.jps.assert.saml.identity=true)
2. Custom OWSM policy was created. It is based on the built-in wss11_saml_token_with_message_protection_service_policy.
3. Web Services/Platform Policy COnfiguration/Trusted STS Servers and Trusted SAML Clients configuration contains the Issuer of my SAML Issuer.
Now I am calling the hello service with an external client. The request meets the security policy. It contains a valid, signed SAML assertion (with sender-vouches subject confirmation method), a valid timestamp is attached in the security header and the body is encrypted with the required method. On the server, I am getting the following exception during the SAML assertion validation:
Unable to invoke endpoint URI "http://172.17.30.192:8001/soa-infra/services/default/SAMLSCAApplication!1.0*soa_a95b5561-3c2e-4339-a301-ec79172914ad/bpelprocess1_client_ep" successfully due to: oracle.fabric.common.PolicyEnforcementException: access denied (oracle.security.jps.service.credstore.CredentialAccessPermission context=SYSTEM,mapName=oracle.wsm.security,keyName=keystore-csf-key read)
Can you please help me?
Regards,
Bharat

Similar Messages

Move-adobject errors(cross-domain move)

Without specifying server
Move-ADObject : The operation could not be performed because the object's parent is either uninstantiated or deleted
with server targetserver and attempted with every dc.
Move-ADObject : The requested operation could not be performed because the directory service is not the master for that
type of operation
anyone know what's going on here?
Dan

Hi, yes I'm confused as well. I ran it from the RID master (just to check) and the cmdlet isn't even recognized. Move-Item and Move-ItemProperty are the only two cmdlets available to me. Running it locally as an administrator give the error
that the object's parent is either uninstantiated or deleted (which brought me to this page). The link of 'movetree' won't work since we're not a 'native' mode domain so it looks like ADMT will be my saving grace. I'd really like to use the
Move-ADObject since it is a smaller, simpler script less likely for error but I'm just not hitting the correct combination of variables.
Thanks,
Stan
Stanley E. Noel Jr

Error 2170 in Cross Domain Policy deployed in Enterprise Portal

Hi All,
We are facing an Error # 2170 for the Cross Domain Policy in Enterprise Portal.
We developed the dashboard using 2 web service connections (using ECC Remote Enabled Functon Module). The Web services were made Public so that they can be accessed from any network. We developed the dashboard using the public enabled webservices and exported to the SWF file which is working fine.
But when we place the dashboard SWF file in the Enterprise portal it gives the error " Cross Domain Policy Error #2170" .
We Placed the Cross domain Policy file in ECC Server in the root directory and placed the same in Enterprise portal C drive.
But still it shows the same error when we preview the dashboard in Enterprise Portal.
The Cross Domain Policy File that we are using is as follows:
-<cross-domain-policy> <site-control permitted-cross-domain-policies="all"/>
            <allow-access-from secure="false" to-ports="" domain=""/>
           <allow-http-request-headers-from secure="false" domain="" headers=""/>
           <allow-https-request-headers-from secure="false" domain="" headers=""/>
</cross-domain-policy>
Please let us know if the cross doamin file is correctly coded and suggest us with suitable solutions for this problem. Also let us know if there is some alternative solution to this issue.
Thanks,
Malla Reddy D

Hello Malla,
Maybe SAP Note 1240810 helps... Anyway, I would say that if your issue is with the direct SAP NW BI connection, through BICS, the only file which is relevant is bicsremotecrossdomain.xml, which should be located on your server HTTP root.
Another check you can perform is if you have both portal certificate entries as per SAP Note 1508663.
Kind Regards,
Marcio

Safari cross domain error

I tired to access a web site via Safari that I previously was able to access; however, now I get the following message: "Cross Domain Error: Cross domain is not supported by this browser." Is there a plug-in or something else that would allow me access the site?

Hi,
Please try to configure the cross domain policy file to allow public read access (that is, access it without federation requirement), make sure you can access the address
http://something/clientaccesspiolicy.xml directly in a browser
without redirecting to check whether the cross domain policy file could be anonymous accessed (Please start a new browser session and make sure you're
not logged in. Then test the cross domain policy file.).
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cross-domain Navigation Error

Hi folks,
I was just beginning to test out a site on my domain when I received the following error:
Cross-domain Navigation Error
Adobe InContext Editing does not support cross-domain navigation.
For more details, please visit the Adobe InContext Editing Help and Support page.
While I could not find any help easily, I thought I would post here with what I have discovered. I am not entirely sure what "cross-domain navigation" is in the first place, but I had a few hunches.
Initially, I was using a site set up with templates and library items. Then, for the purposes of troubleshooting, I deleted all files and placed one HTML file in the folder with nothing but some text in it. I still received the error message.
On a whim, I decided to try InContext Editing in Internet Explorer instead of Firefox, and it worked. I then downloaded and installed the latest version of Firefox (3.5.1), and the error message still appeared.
Any ideas?
Thanks in advance!

Having the same troubles. Worse it goes into an endless loop where you can't get out of the error message cycle.
http://sonomamountainbusinesscluster.com/

Cross Domain Trust Error, while opening the infopath in sharepoint list.

Dear All,
Facing some issue in
Environement:
Windows = Windows Server 2008
Shareppoint = Sharepoint Server 2013.
Project Server = Project Server 2013
Info Path = Info Path Designer 2013
Detailed:
I have sharepoint environment with Project Server,I which have created task list in my project site and then i customize that form using info path their is one column named: "Product Name" in my task list which is drop down menu in that menu
i want to show all the project name which are created in PWA Site. For that i made the External data connection to my sql server and select my desired table from that and also configured the my column data "i:e; Product Name. And published it to the my
site. Now when i opened that form it prompts the error
"The form cannot be submitted because this action would violate cross-domain restrictions.
If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled
under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection
settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint Central Administration ."
Oopsss !!
Now start googling it found couple of solution shared listed below:
1. Enable the cross domain authenticated in Central Admin –> General Application Settings –> Configure InfoPath Form Services (Done)
2. Now Created the data connection library in my site collection which is PWA Site after that i went to the infopath and creating the data connection and
Convert to Connection File and enter the URL of the data connection library
and its prompt the error " the specified url is not a data connection library and enter the correct filename" didnt remember the exact error description at the moment.
So, that was all stuff, Kindly suggest me any step which i missed that or ay solution that resolve my this issue.
Thanks
REGARDS DANISH DANIE

it seems the data-seed failed in your dehydration store.
so i would check if user orabple exsits in your db (pw is orabpel) .. and recreate the schema by executing the following script (based on your db)
orabpel\system\database\scripts\domain_oracle.ddl
hth clemens

Cross Domain error for Silverlight + MVC application with self hosted WCF service on azure

Hi,
We are migrating existing Silverlight application to MVC; existing Silverlight application is hosted on
Azure which is consuming self-hosted WCF service. For authentication we have implemented
ADFS with WIF (passive). The cloud service (<myWebSite>.cloudapp.net) is C Name to (<myWebSite>.<myDomain>.com) and we
are consuming WCF service at <myWebSite>.cloudapp.net/<myService>.svc, as we were getting “Cross Domain” error so we have added “clientaccesspolicy.xml” at the root of “WEB ROLE”.
Existing Silverlight application works fine but the problem occurred when we deploy our migrated application to the same cloud service. We are getting a “Cross Domain” error.
The same migrated application works fine on UAT environment, the only difference is UAT environment is
without ADFS WIF implementation.
Migrated application is half Silverlight and half MVC with initial landing page is Silverlight. MVC web role is used to host the service i.e. .SVC . To go to SL landing page , redirected from home controller. Following is being observed in fiddler for this
application
Existing Silverlight application -
After authentication with ADFS it redirect to Silverlight landing page.
Before calling service method it looks for “clientaccesspolicy.xml”
In response header we are getting the content of “clientaccesspolicy.xml”
And after this everything works fine
Migrated Silverlight-MVC application –
After authentication with ADFS it redirects to “HomeController” and from there we are redirecting to Silverlight landing page.
Before calling service method it looks for “clientaccesspolicy.xml”
In response header we are getting following content - “https://federation-sts.<myDomain>.com/adfs/ls/?wa=wsignin1.0&
wtrealm=https%3a%2f%2f<myWebSite>.<myDomain>.com&
wctx=rm%3d0%26id%3dpassive%26ru%3d%252fclientaccesspolicy.xml&wct=2014-03-17T10%3a36%3a04Z”
4.Throw “Cross Domain” error.
Also we have added filter in
RouteConfig
for .xml file
routes.IgnoreRoute("{*allxml}",
new { allxml = @".*\.xml(/.*)?" });
NOTE: There is no configuration change apart from MVC configuration.
We have done RDP to web role and found that “clientaccesspiolicy.xml” is present at “E:\approot” location and it is also accessible at “https://<myWebSite>.<myDomain>.com/clientaccesspolicy.xml”.
Please help
Thanks,
Rahul P

Hi,
Please try to configure the cross domain policy file to allow public read access (that is, access it without federation requirement), make sure you can access the address
http://something/clientaccesspiolicy.xml directly in a browser
without redirecting to check whether the cross domain policy file could be anonymous accessed (Please start a new browser session and make sure you're
not logged in. Then test the cross domain policy file.).
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem authenticating user in Active Directory cross domain

Hi,
We have two different AD servers serving our London and Tokyo networks. My application runs in London network but used by both London and Tokyo users.
The two ADs have domain trust setup between them. I have groups defined in London AD to which users from both the London and Tokyo ADs are assigned.
'm trying to connect to London AD using the "users credentials" and retrieve the groups they are assigned to.
I can connect to the London AD using any of the London user and I could retrieve the groups. But when I use a Tokyo user credentials to connect using the London AD server 'm getting Security exception with a code indicating "User Not Found".
The code I use which is very basic is given below . The code below run as such gives me the following error,
[LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece.
If I change in the code below, Provider URL to Tokyo AD Server URL then it works but I can't use that due to security restrictions. As per the Windows Team the domain trust should allow me to connect/bind to the London AD Server with the Tokyo credentials.
Hashtable<String, String> env = new Hashtable<String, String>();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "london ldap server url");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.REFERRAL, "follow");
env.put(Context.SECURITY_PRINCIPAL, "[email protected]");
env.put(Context.SECURITY_CREDENTIALS, "password");
env.put(LdapContext.CONTROL_FACTORIES, "com.sun.jndi.ldap.ControlFactory");
ctx = new InitialLdapContext(env, null);
I would like to know how to authenticate a user in a cross domain Active Directory environment. I read in one of the blogs that the "simple bind" will not work for cross domain user authentication. Unfortunately the blogger didn't mention what would work :( . Any help is much appreciated.
Please bear with me if my query is a naive one and point me in the right direction.
Thanks
Jothi

Hi Praveen,
to avoid losing data when user objects are moved to new locations in the LDAP server, it is possible to configure the User Management Engine to use the value of a specific unique attribute as part of the unique ID instead of the distinguished name.
For this, you have to change the following UME properties:
For user objects: ume.ldap.unique_user_attribute=<attributename>
For account objects: ume.ldap.unique_uacc_attribute=<attributename>
For group objects: ume.ldap.unique_grup_attribute=<attributename>
Be aware that the attribute (i.e. cn or uid) must be unique in the configured user/group path.
Please read SAPNote 777640 for more information regarding this problem and the way to change the UME properties.
Best regards,
Robert

Cross Domain Data Source Error in SSRS 2008

We have our data warehouse server on a different Windows domain (Domain ABC) to the domain where our end user tools such as SSRS and SSAS sit (DOMAIN 123). Historically we've used SQL server mixed mode authentication to get around any cross domain
authentication issues but to tighten up security we are trying to switch to Windows only. However, I'm unable to my development instance of SSRS to connect to a datasource using credentials from a different domain.
I created a copy of the live data source with the same settings except for the credentials. Here I selected Windows credentials (without impersonation ticked) and put in the username with the format DOMAINABC\DomainAccount with a domain account from
the same domain as our DWH server. However, none of the reports I tested can conect and throw the error below. Please can anyone give me some pointers on things to check? My google research has drawn a blank so far!
An error occurred during client rendering.
An error has occurred during report processing.
Cannot impersonate user for data source 'DWH'.
Log on failed.
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)

From your inital post, it sounded like you wanted to login to the data source with a remote domain user (123 in your example). Glad to see that's not the case!
When you tested the credentials with SSMS were you on the remote domain?
It looks to me like the impersonation is implicit: https://msdn.microsoft.com/en-us/library/ms160330.aspx
Theres a couple of notes at the top of that page about remote access being enabled, and the ports that should be open too.
Theres a bunch of potentially useful information about what your connection string should look like here too:
https://msdn.microsoft.com/en-us/library/ms156450.aspx

Cross domain error while displaying .SWF files in portal

Hi Experts,
i am working on EP ,
i am trying to display a .swf file in a iview but that file is giving an error as
Add a cross domain policy file to the external data web server
this swf file is retriving data from BI system.
Please suggest !!
i got a solution of putting a crossdoaim.xml file in root directory but thats not possible

I think two urls will work for you:
Xcelsius SWF with QaaWS through SSL: Cannot access external data
http://livedocs.adobe.com/flex/3/html/help.html?content=security2_04.html

I am calling an xml , that come from rtmp server and i want to play a video . when i pause it show an error of cross domain. what i can i do?

I am calling an xml , that come from rtmp server and i want to play a video . when i pause it show an error of cross domain. what i can i do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

Cross domain scripting: error #2048

Hi,
This is my first entry in this forum but I already found a lot of answers by browsing it. However, altough many references seem to solve the problem I'm hurting on, it doesn't seem to work for me...
Now, here's the case:
I made a flash web site that will be hosted on an external web server (let's call it server «www.external.com»).
My flash needs to get some info from my internal server (let's call it «www.internal.com»).
On «www.internal.com», I don't have access to the root, only to the folder «myfolder» so my website reads like this: «www.internal.com/myfolder».
Being aware of some sandbox security issues, I made a crossdomain.xml file and uploaded it to «www.internal.com/myfolder/crossdomain.xml» to provide acces to «www.internal.com/myfolder» from «www.external.com» wich is the following:
<?xml version="1.0"?>
<cross-domain-policy>
<allow-access-from domain="www.external.com" />
<allow-http-request-headers-from domain="www.external.com" headers="*"/>
</cross-domain-policy>
In my flash, there is the code i use to retrieve my info:
Security.loadPolicyFile("http://www.internal.com/myfolder/crossdomain.xml");
var myData:URLRequest = new URLRequest("http://www.internal.com/myfolder/myapp/datarequest.cfm");
var loader:URLLoader = new URLLoader();
loader.load(myData);
That's where I get the raging error #2048 in an error #2044 telling me this (excuse the french, my player and I use this language):
Error #2044: securityError non pris en charge : text=Error #2048: Violation de la sécurité Sandbox : http://www.external.com/flashapp.swf ne peut pas charger de données à partir de http://www.internal.com/myfolder/myapp/datarequest.cfm.
According to what I saw and read, loading a policy file should allow me to access info. Once I read that the crossdomain.xml file absolutely had to be on the root of the web server, unfortunately, I don't have access to the root.
There surely is something wrong with what I am doing, anyone has a thought?
Thanks in advance and sorry for the long message...

just a guess here - it looks mainly as though you are on the right track, and you are correct if you so not have access to the root, then you must target the crossdomain.xml location as you have specified.
the one thing i don't see that you have listed here is a call to:
Security.allowDomain("www.external.com");
which *might* be the issue

Cross Domain authentication between Windows 2012 R2 domains

Hello,
I am trying to figure out if this is possible.
We have 2 companies that have a VPN between them.
I can ping their PCs and access their servers by name no issues.
What I am trying to do is setup a cross domain authentication.
So their credentials can be authenticated without creating an account for them on a local network. (and vise versa)
This way on our domain I can create share and they will be able to access it without needing to logon without different credentials.
Thank you.

We have Meraki with Site to Site VPN.
Site-to-site firewall
Policy
Protocol
Source
Src port
Destination
Dst port
Comment
Actions
<tfoot>
Allow
Any
Any
Any
Any
Any
Default rule
</tfoot>
Add a rule
So as you can tell we don't block anything at all.

Facebook keeps giving me a cross domain reciver page error on most issues, why is this?

cross domain page receiver error message on facebook?
== URL of affected sites ==
http://http://facebook.mafiawars.com/mwfb/xd_receiver.htm

Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

Cross Domain user security Authentication in Oracle Weblogic Server 10.3.3

Now i have configure the cross domain user configuration in the oracle weblogic 10.3.3 server. But i am not able to configure.
I have mentioned the below oracle document to configure the cross domain configuration.
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/secmanage/domain.html#domain_interop
http://download.oracle.com/docs/cd/E14571_01/web.1111/e13752/toc.htm#INTRO120
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e13952/taskhelp/security/EnableTrustBetweenDomains.html
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/ConsoleHelp/taskhelp/security/ConfigureConnectionFiltering.html
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/security/con_filtr.html#wp1030656
Regards,
S.Vinoth Babu

sorry,wrong forum
move to Weblogic Server Section
Edited by: inchlin on Apr 1, 2009 9:39 AM

Saml authentication error-cross domains

Similar Messages

Maybe you are looking for