Sample Delay - samples into millisecond delay time?

Hi guys
Hopefully a simple question and I'd love some info.
I'm mixing in 5.1 and want to simply put up a general 25 millisecond delay in the left rear channel and 35 millisecond in the right rear channel. Some room calculations for what I recorded require 25 - not 20 and 35 not 30 milliseconds...... the standard stereo Delay won't allow increments of 5 miliseconds.
I'm therefore thinking of using the SAMPLE DELAY ........ whilst I have a 24 bit 48 khz recording setting ....... is it possible that within the maximum 10000 samples I can get up to 35 milliseconds ....?
How do we make the calculation work ..... the manual says 10 centimetres mic distance is 13 samples at 44k
is it possible to get up to 35 milliseconds using this?
Many thanks
Dick

My dear Christian ....... that is just the quickest most wonderful solution to question I've ever had ..... thank you for that PERFECT answer ....... I'm a happy man!
All the very best
Dick

Similar Messages

  • How to read multiple Digital samples and plot a chart with time stamps

    Hi,
     Could anyone send me a code that:
    1. Reads 'multiple samples(lets say 4) from single digital input' 
    2. 'plot digital data as a chart with time stamps'
    3. Find frequency
    4. Log data into file with time stamps
    I have attached the code which i tried.
    Thanks,
    LK
    Attachments:
    DigitalNSample.vi ‏27 KB
    DigitalNSample.vi ‏27 KB

    Hi,
     Could anyone send me a code that:
    1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
    2. 'plot digital data as a chart with time stamps'
    3. Find frequency
    4. Log data into file with time stamps
    I have attached the code which i tried.
    Thanks,
    LK
    Attachments:
    DigitalNSample.vi ‏27 KB

  • Site Studio sample site deployment into a WebLogic Server

    Hi,
    Need help in the following requirement . I need to demonstrate Site Studio sample site deployment into a WebLogic Server host with access to eCM content.Host will be configured for HTTPS.
    Host(Domain1) and ECM(Domain 2) are on two different domains . ECM(Domain 2) will provide a war file that should be deployed on Host(Domain1). What do I need to do to achieve this.
    Please help.
    I am new to weblogic deployed if my question is not clear please let me know what more details I need to have for accomplish this.
    Edited by: user4581381 on Nov 21, 2010 6:49 PM

    Thank you for your help but the result is still the same.
    I deployed the library on weblogic server suggested by you.
    File Deployed as library = oracle.adf.desktopintegration.model.ear
    From the folder = C:\Oracle\Middleware\oracle_common\modules\oracle.adf.desktopintegration.model_11.1.1
    It is active.
    After this I loaded jdeveloper and deploy the same sample application and found that the result is same.
    Pls let me know where I am going wrong.
    Regards,
    Masood
    [11:53:09 AM] ---- Deployment started. ----
    [11:53:09 AM] Target platform is (Weblogic 10.3).
    [11:53:09 AM] Retrieving existing application information
    [11:53:09 AM] Running dependency analysis...
    [11:53:09 AM] Building...
    [11:53:09 AM] Deploying 2 profiles...
    [11:53:09 AM] Wrote Web Application Module to C:\JDeveloper\mywork\10MinDemo\ViewController\deploy\10MinDemo_ViewController_webapp.war
    [11:53:10 AM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\10MinDemo\deploy\10MinDemo_Project1_10MinDemo.ear
    [11:53:10 AM] Deploying Application...
    [11:53:10 AM] [Deployer:149191]Operation 'deploy' on application '10MinDemo_Project1_10MinDemo' is initializing on 'ADFServer'
    [11:53:11 AM] [Deployer:149193]Operation 'deploy' on application '10MinDemo_Project1_10MinDemo' has failed on 'ADFServer'
    [11:53:11 AM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application 10MinDemo_Project1_10MinDemo on ADFServer.: .
    [11:53:11 AM] Weblogic Server Exception: weblogic.management.DeploymentException:
    [11:53:11 AM] Caused by: java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
    [11:53:11 AM] See server logs or server console for more details.
    [11:53:11 AM] weblogic.management.DeploymentException:
    [11:53:11 AM] Deployment cancelled.
    [11:53:11 AM] ---- Deployment incomplete ----.
    [11:53:11 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  • Measure milliseconds in time line - arrange window?

    Hi folks,
    When I draw a locater selection in the time line, Logic can tell me how long that range is. But only on beats or seconds+frames.
    I would need to know the length in milliseconds for accurate delay adjustment - You guess I need to phase align some tracks. How can I measure exactly?
    L9.1

    Select both a reference- and a delayed-region
    Place a cut on a transient of the reference region
    Now open the dealyed region in the sample editor
    Select the range between region start and the transient
    There's your delay in samples
    You will have to delay all your reference tracks by this amount, so all tracks will be late. Is that really what you wanted ?
    Christian

  • Bug in LV6 AI sample channel, sample channels?

    Hi,
    I have some problems using the DAQ functions AI sample channel / sample
    channels. I can't define the channels I want to scan. If I use the
    channel numbers, for example 0:4, the right channes are read in, but the
    defined scaling does not work. If I use the channel names, I can only
    define one channel. There's no array acceptet to define more than one
    channel.
    Any ideas?
    Regards
    Martin
    [See first answer for additional information]

    Martin,
    I run into this all the time when teaching the LabVIEW courses.
    Although you can select the channel names you have created from the drop down menu, it only allows you to select one. What you need to do is manually type in the additional names (with a comma separating each name). In order to do this, make sure you have right mouse clicked on the control and Allow Multiple Names is checked.
    Hope this helps.
    --Eldon
    PS. You have probably noticed, but you can't combine the names and the numbers, i.e. 0,1,temp,3 will give you an error.

  • EXS Sampler getting samples in?

    Ive been chopping live drum audio files saving to desk top then into ESX.
    Is there a better way?

    revDAVE wrote:
    I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
    Yes, you can do this.
    2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?
    I highly suggest that you contact Redmatica and get an update to get it working again.

  • Converting Date Into Milliseconds?

    I want to convert the following date and time into milliseconds: 4/21/2003 21.50. I know how to convert milliseconds into a date, but not the other way around. Could someone, please, help?

    String etd = "4/21/2003 10:45";
    DateFormat df = DateFormat.getDateTimeInstance(DateFormat.SHORT, DateFormat.SHORT);
    df.setLenient(true);
    try {
    df.parse(etd);
    catch(Exception e) {
    e.printStackTrace();
    I'm trying to use DateFormat to convert a date into ms. However, I'm getting a parsing error. Any suggestions?

  • Sample Mode: Sample on demand

    Hi ppls,
    I got a short question (probably a pretty stupid one ). So what's the difference between 1 Sample on demand and 1 hardware timed sample? I do know that the hardware timed sample use the sample clock of the DAQ card. I thought, that the sample on demand might sample one point and that's it, but somehow it also samples all the time (How do I know the sample rate of the sample on demand option).
    Thanks, I appreciate ur help! 
    Solved!
    Go to Solution.

    From the help:
    In hardware-timed single-point sample mode, samples are acquired or generated continuously using hardware timing and no buffer. You must use the sample clock or change detection timing types. No other timing types are supported.
    Use hardware-timed single-point sample mode if you need to know if a loop executes in a given amount of time, such as in a control application.
    Because there is no buffer if you use hardware-timed single-point sample mode, ensure that reads or writes execute fast enough to keep up with hardware timing. If a read or write executes late, it returns a warning.
    Continuous Pulses (HW Timed Updates) is hardware-timed single point for counter output.
    As for what it means and when to use it?  No idea.  I can't think of a time that having a hardware timed single point sampleing would be useful.  But I'm guessing there is someone that needed this feature otherwise NI wouldn't have support for it.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • I paid for exportpdf and everytime i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable.  how can i export only form fields that were filled in?

    i paid for exportpdf and every time i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable. Some forms can't be saved so having to log in and only use webtool to upload a saved pdf won't work.
    as well, how can i export only form fields that were filled in if I can get pdf to save to computer?

    Hi kstine,
    I can see why that would be frustrating! Have you tried selecting Stayed Signed In underneath the Adobe ID and Password boxes when you try to log in?
    What did you use to create the PDF form? If you used FormsCentral, form data is saved to your online FormsCentral account. If you have Acrobat, you can export form data as described  here: Adobe Acrobat X Pro * Manage form data files
    Best,
    Sara

  • Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?

    Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?

    Hey barnsieno10,
    Thanks for using Apple Support Communities.
    Looks like sign in issue, This article is a great resource for the message you are receiving.
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/ts3970
    Have a nice day,
    Mario

  • Re-Linking EXS Sampler Instruments & Samples

    1 - Curious what you think of this concept:
    I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
    Is this ok to do? Is there a better way?
    2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?

    revDAVE wrote:
    I have an external drive that I'd like to be able to move to several computers and use as my samples drive. To keep things consistent, I thought it best to keep BOTH EXS Sampler Instruments & Samples on this drive. Then I can just create aliases of the EXS Sampler Instruments and drop them in the main logic support folder. That way I can easily just move the drive to either computer for the greatest flexibility.
    Yes, you can do this.
    2 - I'd like to re-link many EXS Sampler Instruments to their samples. I used to use the ExsManager Pro.app but that stopped working a while back. Is there another way to have logic do all the re-linking instead?
    I highly suggest that you contact Redmatica and get an update to get it working again.

  • Convert system time into User local time.

    Hi,
    How to convert System time into User Local time.
    Are there any FMs available.
    Regards,
    Kiran

    hi,
    There is just one simple funda behind the Date and time logic in SAP.
    -> It is absolutely useless to store Date and time directly in DB. Why ?
    Because 00:00 a.m in London could mean 05:30 in India !! So If I (in India) store a Date 1st Feb 2008 , 10:00 a.m .. This time for a person in London could be invalid.. because he is behind your time zone..
    So the solution is to store the date/times in Timestamps format. Taking the above example.. 1st Feb 2008, 10:00 a.m (in India) will be stored as 20080201043000.
    This time if seen in German Time zone will look as : 1st Feb 2008, 05:30 a.m.
    Simple right
    -> In India we store date as DD.MM.YYYY while in other countries they store it as MM.DD.YYYY.
    The separator could be . or - or / .
    The date format is user dependent. I might prefer to store it as DD.MM.YYYY and you might want to store it as MM-DD-YYYY.
    System does not bother what your format is. It always stores in YYYYMMDD (8 Char)
    On screens if you want to display Date then it must always be shown in that users format who is seeing it. How to get this done ?
    DATA : lv_date(10) type c.
    write sy-datum into lv_date.
    So in LV_DATE variable the date will be stores in the users format.
    Simple right
    There are function modules that do the same. But normally we should avoid use of FM to make code simpler, short and easy... no complications at all ..
    You can use system variables sy-datlo (Local Date for Current User) and sy-timlo ( Local Time of Current User ).
    You can also use GET TIME statement.
    reward if useful,
    preet

  • I just got a MacBook Pro yesterday and I've logged into a few times already but it wont let me now.. Its just shakes and highlights it for me to do again..

    I just got a MacBook Pro yesterday and I've logged into a few times already but it wont let me now.. Its just shakes and highlights it for me to do again..
    I have the 3 year warrenty thing so can i just call them and ask them about itt?

    Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities > Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A “Reset Password” window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled “Select the user account” if not already selected.
    Follow the prompts to reset the password.
    Select Apple menu > Restart from the menu bar.

  • Why do I have to sign into iTunes every time I open iTunes?

    Why do I have to sign into iTunes every time I open iTunes? Before I stay signin until I logout and signin again if making a purchase.

    its really annoying since nobody uses my computer and its password protected.... But like sometimes it does happen where i have to put it in, and other times it doesn't

  • Why do I have to log in all the time into iCloud every time in spite of clicking the "keep me logged in" box?

    why do I have to log in all the time into iCloud every time in spite of clicking the "keep me logged in" box?

    It is amazing that Apple does nothing about this.  It used to work before but this function (keep me logged in) stopped working a couple of months ago.  Many people seem to have the same problem but Apple seems unable to solve their own problems...

Maybe you are looking for