Sample inspection during first time procurement.

Hi,
I have a scenario when ever I start procuring from a new vendor, Plant will be asking for sample say 10 pieces. And when vendor supplies the same, the quantity will go for quality inspection. Once all the parameters are met order will be posted to the vendor with a PO for more quantity.
I understand that I need to have following master data, Like Vendor, Quality info record, Inspection plan for the material, MIC's associated with them, Inspection type assigned to the Material master. (Which type of inspection type can I use here)
And What type of movt types will be used.
Kindly help me out how to go about this process.
Regards,
N.Nagaraju

If you are looking for simple process , try this.
1. Assign 01 inspection type in material master
2. SAP will create inspection lot at the time of GR.
3. Process inspection lots as usual.
4. Once you are satisfied with vendor quality- Create Q info record for vendor / material.
In the tab 'Inspection control ' set inspection control to 'No Inspection'.
5. All subsequent receipts would not create inspection lot.
In this process, You have to manually set the Q info record to no-inspection.
To automate the process use 'status profile' in the Qinfo record.
Marwadi.

Similar Messages

URGENT!!! ORA-01041 during first time installation on Win2000

During first time installation on Windows 2000 (Pentium IV 1.8Ghz,256Mb RAM)the error ORA-01041 is raised.
Any ideas????

ORA-01041 internal error. hostdef extension doesn't exist
Cause: Pointer to HSTDEF extension in HSTDEF is null.
Action: Contact Oracle Support Services.
Joel Pèrez

Error "Propagatable alreay exists" during first-time component import

Hi all!
I have yet another strange problem. I don't know english tenses very well and will describe my doings as sequense list.
1) Prepare SAP CRM 5.0 for development according Dev. Guide (create track, apply note 669669)
2) Successfull import was be done exception SAP-SHRWEB (got an error "Propagatable alreay exists")
3) Try to resolve this error according note 989010. Try was unsuccessful (details here: SAP NetWeaver Development Infrastructure (NWDI))
4) Delete track for recreating. Don't know how to delete workspace from DTR (details here: SAP NetWeaver Development Infrastructure (NWDI))
5) Recreate track with another name
6) Performing check-in and import components from Development to Consolidate system
7) For component SAP-SHRWEB I've got the same error:
> 20080507175512 Info   :Starting Step Repository-import at 2008-05-07 17:55:12.0760 +6:00
> 20080507175512 Info   :Component:sap.com/SAP-SHRWEB
> 20080507175512 Info   :Version :MAIN_CRM50VAL_C.20060914085157
> 20080507175512 Info   :1. propagation request is of type TCSSoftwareComponent
> 20080507175513 Info   :Propagatable:0af61b4e430511db8c9d0030057116fe exists allready in the repository. No import necessary.
What's going??!

Is that really everything in the log file? If the import failed, there should be some error message.
e.g. this is a complete log file at our side (where the import was succesful)
Info:Starting Step Repository-import at 2008-01-18 16:52:04.0642 +1:00
Info:Component:sap.com/SAP_ESS
Info:Version :MAIN_ERP05VAL_C.20070718120624
Info:1. PR is of type TCSSoftwareComponent
Info:propagatable is known in repository, it is not necessary to write the workspacecontent to the DTR
Info:OK   : integrating of changelist 4dbb761a352711dc848f0030057116fe succeeded without conflicts.
Info:Step Repository-import ended with result 'success' at 2008-01-18 16:52:09.0128 +1:00
Kind regards,
/Sigiswald

OIM: Invalid ManagerLogin during first time Recon with LDAPSync

Hey All,
I just installed OIM with LDAP Sync. I can create users in OIM and they get pushed to OID just fine. When I try to run a full Recon though, OIM creates events for all the users, but they are all stuck, all with the same note:
oracle.iam.reconciliation.exception.InvalidEventException: Invalid ManagerLogin : MLEGGIO at
I'm guessing it's invalid because it doesn't exist, but no one exists yet... am I missing something?
Thanks
Alex

From where are you doing full recon from? Also did you check if you have the user "MLEGGIO" in OIM? The problem I see is that you doing a trusted recon to load a user say "X" whose manager is "M" but "M" does not exists in OIM, so OIM will not be able to create that user. The workaround to this is to create a UDF in OIM and map it to the manager from the target. Later on once the user "X" is created in OIM then run another schedule task which takes the manager from UDF (i.e. "M") and if "M" exists in OIM then will set it to the OOTB manager field in OIM for "X"
-Bikash

Sampling Inspection at variable rate during Receiving process

Hello,
We would like to perform sampling inspection during receipt process, actually we perform sampling for couple of supplier, the QA procedure is to inspect 10% of the total qty( we don't have lot/serial control set for items), if any failure then need to increase sampling rate to another by 10%.
As I understand Quality module in 11.5.10 allows for sampling at receiving process. But I am not sure, does it allow for above requirement to perform at different sampling rate based on failure.
Looking forward for your expert comments.
Thanks,

In quality module, you can setup rules that can alter the sampling rate. It is called skip lot inspections.
e.g. you can say that
* inspect 1 in every 5 shipments.
* But if any shipment is found bad, inspect 3 in every 5 shipments.
* Once 10 consecutive inspections are successful, then revert back to 1 in every 5 shipments.
Keep in mind the functionality works on number of receipts - not quantity in each receipt.
First you have to enable your org for skip lot inspections
Then you define a skip lot process code. This is where you define your logic/rules.
Then setup your sampling collections plan.
Hope this answers your question
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant

BPEL web service is taking long time during first invoke

Hello All,
I have a BPEL process where I am calling a webservice which returns invoices.
The issue is during first invoke of webservice it is taking 3 minutes to return the data. After that it returned the data for further invokes in 5 – 10 seconds on average time.
Could anyone please provide your help on this. This is running on PRODUCTION box and is very urgent.
Thanks Prashant
Edited by: 879543 on 16-Aug-2011 02:09

Hello All,
I have a BPEL process where I am calling a webservice which returns invoices.
The issue is during first invoke of webservice it is taking 3 minutes to return the data. After that it returned the data for further invokes in 5 – 10 seconds on average time.
Could anyone please provide your help on this. This is running on PRODUCTION box and is very urgent.
Thanks Prashant
Edited by: 879543 on 16-Aug-2011 02:09

How to consider sample qty of raw material's quality inspection during mrp.

hi expert.
i have to consider sample qty of raw material's quality inspection during mrp.
i am wondering how to implement it.
is this possible?
thank you~~!!

Hi Seung Hyun,
I think it depends on the sample quantity, whether it is a fixed quantity or it depends to the raw material quantity or requirement from the orders. If it is not fixed, then you can use scrap percentage as suggested by Vivek.
If it is fixed quantity, then there are several alternatives to follow:
Include the sample quantity to your safety stock
Create another material number to distinguish the sample from the original raw material number and include it in the BOM
Regards,
Julian

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

First Timer – Can't get Win Xp Pro to Load – Blue Screens - What to do next??

This is my first build, and I have the following hardware:
Athlon64 939 3000+ Processor
MSI K8N-Neo2 Platinum Motherboard
Corsair TWINX1024-3200C2PT 1GB DDR400 (512X2)
Hitachi 160GB 7k250 SATA Hard Drive
ATI 9600XT AIW Video Card
Plextor 716A 16X Dual Layer CD/DVD
Antec True430 PSU (+12V: 26A; +5V: 36A)
Cooler Master Praetorian Case (Silver)
After putting it together, I observed the CPU temps in the BIOS for a while (my concerns, now gone, are documented in another thread), and never noticed any other problems. I partitioned the hard drive using Partition Commander, from the CD.
Last night was the first time I tried to load Windows Xp Pro (have used 98SE on my old PCs), and it did not go well. Although I had loaded the Partition Commander S/W a number of times via the CD ROM drive, the first time I tried to load Win Xp, it wouldn’t boot up from the CD ROM drive. I had to try it a few times before it started (even though the CD ROM was set to first priority for booting in BIOS). Once started, when it was in the middle of loading files (not far into the entire process), I started getting errors with wording something like “Couldn’t load file XYZ, hit enter to retry, or cancel...”. After hitting Enter a few dozen times, it made it through that part of the process, but then later, I started getting blue error screens reading “A problem has been detected and windows has been shut down to prevent damage ...” I rebooted and the installation resumed, but every time but one (I must have tried it six times) I ended up at a blue error screen before it finished. At the bottom of these screens, there was always a line that read (but not always the same numbers):
“*** STOP 0x0000008E (0xC0000005, 0x804EAAB4, 0xEE7A8C80, 0x00000000)”. One time, there was also, after the first para on the screen the line “DRIVER_IRQL_NOT_LESS_OR_EQUAL”. Another time, it made it to the final (I think) “Saving Settings” part of the process, showing 5 mins left to go, and just hung.
Can someone help me figure out what these errors mean? I’m at a loss as to what to do next, and of course really want to get this thing up and running. I read another similar thread where people suggested the PSU was insufficient (he was using a 300W PSU), but I don’t think that is the issue here. I’m also sure I have the latest BIOS version (V1.4) for my motherboard, so that shouldn’t be an issue either.
Thanks in advance for your help....Thksnow

This is a completely new install (new h/w and s/w) of Xp Pro w/SP2 incorporated (not an upgrade). Someone recommended removing one of the two memory sticks, and trying to load Xp afterwards, then reinstalling the 2nd stick after the install completes. I tried it tonight, after reformatting the partition, and the install went completely thru without a hitch the first time!!! I can't explain why it worked, but I guess there can be some kind of memory issue when you have two dual channel sticks during an Xp install. I have now reinstalled the 2nd stick, and so far, so good. Tomorrow I will run Memtest86 to see if that turns up any errors. By the way, how do you tell if it's truly operating as "Dual Channel"? Is there some way to tell?
Tks...Thksnow

For the first time I think to switch LR

I'm really surprise with myself having the idea to swith to Lightroom.
I've adopted Aperture since the launch, I've immediately loved his workflow. The first 1.0 with many bugs but with the confidence in Apple that new versions will resolve it (and in part it has happened). The rebate of the price, very serious solution. The efforts to give a real usable version changing the development team. I've always supported Aperture, I've also made many show of this software in cooperation with my local re-seller of Apple because I have really thinked that Apple with Aperture will arrive in photo as Final Cut arrived in the video. I speak always the best about it.
But, there is a "but".
After 1 year and half the progress is stop. No idea of when 2.0 will be released, no idea of which kind of new functions will have. In the same time Adobe is really aggressive and competitive, many people I know are switching to Adobe solution because they are more "sure" for the future (and when you "married" with a library concept and software it's a very important thing, specially if we are speaking about raw adjustment settings that will be lost if you change software). Yesterday, during a show made by Adobe I've study very well Lightroom for the first time, I understand the potential and also the possibility to convert my library.
For the first time I really think to switch.
What do you suggest? I know that I'm in Aperture forum so all of us are using that software, but please, help me to understand why it should be better for me stay in Aperture without any idea on the future of this software.
Thank you!
Max
p.s. sorry if my english is not perfect.
G5 Dual 1.8 | 2gb ram | Ati X800 XT 256mb | Cinema Display 23" + Dell 18" Mac OS X (10.4.6) MacBook Pro 15.4 2.0 ghz | 2gb ram

Like many here, I purchased Aperture almost when it came out, and followed all of the updates. I'd used Aperture for over a year when Lightroom 1.0 was released.
When Lightroom 1.0 was first released, I tried a 30 day trial. I shoot landscape photos, and had a Canon RAW file that was particularly difficult to process and extract because of the dynamic range of the image. When I opened that file in Lightroom, the RAW output from Lightroom was noticably better than Aperture. Without any adjustment, it was better than I could accomplish with Aperture under any condition.
In the end, I use Lightroom for one reason: the quality of RAW extracts. (Photography is about the image.) A bonus is that it's noticeably faster than Aperture on my equipment (Dual G5 and a MacBook Pro). I'm not so fond of Lightroom's modal interface. Aperture is much more convenient in that respect. But the image quality is the prime consideration, and Aperture's RAW processing isn't as good as Lightroom's, at least not yet.
I'm keeping Aperture up to date. I've also tried to organize my files and photo library so that switching between the two applications is possible. If Aperture pulls out in front I'll go back.
There are two good reviews of both programs by two different people. One is a Lightroom person that tests Aperture, and the other is an Aperture person that tests Lightroom. They differ on which application they prefer. If you read both, you'll get a sense of the strengths and weaknesses of both.
<http://digitalmedia.oreilly.com/2007/03/05/lightroom-vs-aperture.html>
<http://digitalmedia.oreilly.com/2007/03/05/aperture-vs-lightoom.html>
Good luck.
Jim

I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Tape initialization error at first time in DB13

Hi ,
first time While initializing tapes in DB13 , we are getting
error "<b>0003 Error during Tape initialization</b>".At OS ( HP-UX / Oracle), SAP R/3 4.72Enterprise.
level backup device initialized.I have enclosed logs ,please suggestto resolve this issue.
We ahve tape drive DLT 40/80GB.Can any one help me how to initialize the tape at first time scheduling backup.
Thanks,
Chimsik

Hi Chimsik
please find the below link
http://help.sap.com/saphelp_erp2005/helpdata/en/9c/7aea7b0dbd324ea40391f40b7a9f17/frameset.htm
Regards
shayi

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

Large first-time sync fills up C: drive

I just got a new 80GB video iPod for Christmas. I store a large number of ripped music files, one season of a TV series, and some photos on an external hard drive, and manage them through iTunes. The grand total for all this content was around 60GB. Long ago, I configured iTunes to use the G: drive (the external hard drive) as the location for all my content.
The first-time sync to the new iPod went fine--automatic, not manual--except that something kept filling up the C: drive. (Again, the music is actually stored on an external G: drive.) I de-installed things during the sync to free up extra GB of space. As soon as they disappeared, iTunes kept filling them up. I'm now out of hard disk space on C:, with no idea what iTunes or the iPod did to fill up this space.
If there's some cache that needs to be cleared, nothing has cleared it yet, and I have no idea where to find it (or what the consequences of clearing it will be). The process seemed smart enough to use what space was available, but no more. In other words, the sync continued, even after there was no room left on the C: drive.
I had recently updated iTunes, which for reasons unknown, blew away my music library. I had just rebuilt it before doing the sync.
The lack of space on the home PC puts me in a dangerous situation, given how fussy WIndows gets when it doesn't have spare room on the hard disk to use for updates and other operations. Any help you can provide would be greatly appreciated.
Here are other specifics, for what they're worth:
Operating system = Windows XP
iPod firmware version = 1.2 (couldn't update to 1.2.1 because of the lack of disk space)
iTunes version = 7.0.2
External hard disk = Western Digital, mounted via USB
iTunes option, Keep iTunes Music folder organized = true
Podcast subscriptions = none
HP desktop Windows XP See posting

There isn't any cache for iTunes, other than the buffer for streaming radio. What you might want to do is search your My Documents\My Music\iTunes\ folder and see if there is anything in there other than the .xml library file. I know you did a search for *.mp3 but check it anyway...there is a chance that iTunes converted the files from *.mp3 to *.m4a (AAC audio)

In ABAP How to locate an Input file from a Directory during run time

I'm loading data from a flat file(text file) into SAP thru BDC programs. All my input files are present in Application server.How to locate an Input file in a directory during run time to process BDC programs programmatically. Are there any in-built functions?Provided me some sample code or any method of doing the same.

Hello Murali,
you should ask this question in the ABAP forum.
Regards
Gregor

Sample inspection during first time procurement.

Similar Messages

Maybe you are looking for