OIM: Invalid ManagerLogin during first time Recon with LDAPSync

Hey All,
I just installed OIM with LDAP Sync. I can create users in OIM and they get pushed to OID just fine. When I try to run a full Recon though, OIM creates events for all the users, but they are all stuck, all with the same note:
oracle.iam.reconciliation.exception.InvalidEventException: Invalid ManagerLogin : MLEGGIO at
I'm guessing it's invalid because it doesn't exist, but no one exists yet... am I missing something?
Thanks
Alex

From where are you doing full recon from? Also did you check if you have the user "MLEGGIO" in OIM? The problem I see is that you doing a trusted recon to load a user say "X" whose manager is "M" but "M" does not exists in OIM, so OIM will not be able to create that user. The workaround to this is to create a UDF in OIM and map it to the manager from the target. Later on once the user "X" is created in OIM then run another schedule task which takes the manager from UDF (i.e. "M") and if "M" exists in OIM then will set it to the OOTB manager field in OIM for "X"
-Bikash

Similar Messages

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

HT204053 Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

There is no problem about using one ID for iTunes, iTunes in the Cloud and iTunes Match, and another for iCloud and its email and syncing facilities. This way you can all use the same iTunes account but have separate emails and calendars etc.

First time working with fcpx

first time working with fcpx; how to get my drives ( internal & external) visable in libraries?

RudolfC wrote:
first time working with fcpx; how to get my drives ( internal & external) visable in libraries?
may I throw in some really 'Evangelistic' thought?
Stop thinking in 'drives' (folders/files)!
.. or any other 'manually' organizing structure. FCPX is first-of-all a database; tagging, keywording, smart-list - all faster, better, more flexible and much more convenient than any 'drawer based scheme'.
... ok, that was a bit pathetic, and for sure, you should know how to utilize external drives...-
But when you keep starring on the Finder, you'll soon will be surprised, how FCPX manages to store 10Gigs on a 5GB-drive! (keyword 'hard/sym links')...
... no more 'drives'! Just Libs!

URGENT!!! ORA-01041 during first time installation on Win2000

During first time installation on Windows 2000 (Pentium IV 1.8Ghz,256Mb RAM)the error ORA-01041 is raised.
Any ideas????

ORA-01041 internal error. hostdef extension doesn't exist
Cause: Pointer to HSTDEF extension in HSTDEF is null.
Action: Contact Oracle Support Services.
Joel Pèrez

First time working with 802.11n, not working properly?

Hello,
This is the first time I use 802.11n in my network there is only one AP1141 but the clients don't connect at 802.11n rates, instead they connect at data rates as low as 11 Mbps. At the begining they connect at 144 Mbps but immidiatly it decreases to 11 or 12.
Many of our wireless clients in the company are Intel(R) WiFi Link 5100 AGN.
Any comments?
AIR-AP1141N-A-K9
AIR-WLC2106-K9
6.0.182.0
Let me know if more info needed?
Thanks

Hi George,
So you suggest to keep only WPA2/AES?
Regarding the coverage area keep in mind this is a really small 4 floor building with an AP floor floor, I installed only one AP1141 in my floor and kept the AP1131 in the other 3 floors, I might reduce the power to half since I don't need them working at full power unless I need coverage in the stairs in order to enforce roaming to IPPhones. Also, I don't want to bond channels on 2.4 because I read that as a recomendation in a Cisco's document (anyways I did not find how to do it in 2.4, wuld be a nice tip if you tell me how just in case) so 144 Mbps would be great as long as it works properly. I did not experienced these rate hoping until I enabled this AP1141.
And yes most of the clients that reported issues are Intel (engineering team, haven't checked the rest yet).
Regards!

First time dealing with Greenshift/Gamma problem in Quicktime/Safari

I've been editing video on a Mac and in Final Cut Pro since version 2 (I am transitioning to Adobe Premiere Pro so don't judge )and this is the first time I've had a huge problem with a shift in color from what I see on the canvas to what is exported - and the first time I've noticed that that problem/shift only happens when the footage is viewed in an Apple program (Quicktime or Safari when uploaded to Vimeo). Opening the footage in VLC or viewing the upload on Firefox? Looks gorgeous. But on Safari or Quicktime? Colors are muted and have a greenish cast.
In doing some research, especially on various Adobe forums, I've learned that this is a scarily widespread problem (and learned the term 'QuiRktime') so I'm suprised I haven't had this problem before - it may be due to the lovely taupe/grey outfits, skin tones, etc that I got to shoot.
The footage is for website/computer usage so looking at it on my monitor should be a good indicator. And I've had others look at the Vimeo upload and some have commented on the green cast (so are probably Mac people too...).
So I'm not sure what to do - how best to give it to the client.
Workflow: footage is ProRes HQ, shot in 1080, shrunk to 720 to make 'artificial second cam close-up' (don't ask...). Edited in Final Cut Pro, but I've been going back and forth with it in Adobe Premiere Pro to try and tweak the picture color and contrast, as I've been liking the filters in Premiere better than FCP lately, but had some pre-built items I needed to use in FCP as I haven't gotten around to re-building replacements in After Effects.
I've exported it as ProRes and used Adobe Media Encoder to compress (been using both the Vimeo 720 preset - and tried upping the bitrate, setting quality to max rendering - and the Broadcast 720 preset).
Only time I've gotten it to look good when opening on Quicktime is when I export it as Animation versus ProRes, but the resulting file is 12X (and thus 12GB) so too large to upload or burn on disc (and compressing it for web usage from that file gives identical results to simply compressing the ProRes file in the first place or exporting directly from Premiere Pro to h.264)
So my question is...what is the best way to export this footage to get the right color cast in Quicktime based computers and non-Quicktime using computers.
I've uploaded a screenshot of the footage opened in Safari and Quicktime (left side) and Firefox and VLC (right side) to Flikr
http://www.flickr.com/photos/44843717@N04/8300689101/
Thanks for any help you can give

The footage is for website/computer usage so looking at it on my monitor should be a good indicator.
It actually doesn't matter where the footage will end up. The idea is to see the image accurately while grading, and for that you will need a calibrated, external TV. You just can't use a normal computer monitor or software media players for this.

Problem first time round with DAQmxWriteDigitalLines

Hello,
Please can any one help with the code below?
(start task)
(create channel)
DAQmxWriteDigitalLines(m_taskHandle, 1, 1, -1#, DAQmx_Val_GroupByChannel, m_writeArray(0), m_sampsPerChanWritten, 0)
(stop task)
m_writeArray is 2 bytes long.
When I first run the task I get a buffer overflow error. When I run it a second time it works fine? The DAQmxGetWriteDigitalLinesBytesPerChan always gives 2 bytes per channel (strange? or expected?) - I tired increasing the m_writeArray size but it size exhibits the same behaviour. Anyone know?
Cheers,
Daniel

Thanks Jeff,
I tried your code in C and it worked as you said. First time around, no problems. I'm calling these functions with VBA (from within Excel,) and for some reason first time round I still get an error. It's curious, and I don't understand it. The problem is runtime error 6, "overflow." Interestingly enough if I step through the code, and pause for a second or so between making the channel and calling the write lines function I don't have a problem. I really dont understand since the C program works well. I've included the class I used to control the lines below, any ideas?
Best Regards,
Daniel
Option Explicit
Private m_sampsPerChanWritten As Long
Private m_TaskHandle As Long
Private m_writeArray(0 To 3) As Byte
Private m_bytesPerWriteDigitalLines As Long
Private Const c_digitalLineHIGH As Long = 1
Private Const c_digitalLineLOW As Long = 0
Private Const c_terminalAddress As String = "Dev1/port0/line0:1"
Private Sub Class_Initialize()
' Create the DAQmx task.
DAQmxErrChk DAQmxCreateTask("", m_TaskHandle)
' Add a digital output channel to the task.
DAQmxErrChk DAQmxCreateDOChan(m_TaskHandle, c_terminalAddress, "", DAQmx_Val_ChanForAllLines)
'Check the number of bytes per channel
DAQmxErrChk DAQmxGetWriteDigitalLinesBytesPerChan(m_TaskHandle, m_bytesPerWriteDigitalLines)
If m_bytesPerWriteDigitalLines <> 2 Then
MsgBox ("Error. Expecting 2 bytes per channel.")
End If
'Verify the task
'DAQmxErrChk DAQmxTaskControl(m_taskHandle, DAQmx_Val_Task_Verify)
'Reserve and Commit the resources for the task
'DAQmxErrChk DAQmxTaskControl(m_taskHandle, DAQmx_Val_Task_Commit)
'Start the task
DAQmxErrChk DAQmxStartTask(m_TaskHandle)
End Sub
Private Sub Class_Terminate()
'stop the task
DAQmxErrChk DAQmxStopTask(m_TaskHandle)
' terminate the task
DAQmxErrChk DAQmxClearTask(m_TaskHandle)
End Sub
Public Sub Inflate()
m_writeArray(0) = c_digitalLineLOW
m_writeArray(1) = c_digitalLineHIGH
'write the array to the digital lines
DAQmxErrChk DAQmxWriteDigitalLines(m_TaskHandle, 1, 1, -1#, DAQmx_Val_GroupByChannel, m_writeArray(0), m_sampsPerChanWritten, 0)
End Sub
Public Sub Deflate()
m_writeArray(0) = c_digitalLineHIGH
m_writeArray(1) = c_digitalLineLOW
'write the array to the digital lines
DAQmxErrChk DAQmxWriteDigitalLines(m_TaskHandle, 1, 1, -1#, DAQmx_Val_GroupByChannel, m_writeArray(0), m_sampsPerChanWritten, 0)
End Sub
Public Sub StopAir()
m_writeArray(0) = c_digitalLineLOW
m_writeArray(1) = c_digitalLineLOW
'write the array to the digital lines
DAQmxErrChk DAQmxWriteDigitalLines(m_TaskHandle, 1, 1, -1#, DAQmx_Val_GroupByChannel, m_writeArray(0), m_sampsPerChanWritten, 0)
End Sub

HT201412 First time sync with PC fail

I have tried to sync my new Ipad with my PC and it wont do it. It says it needs a system restore and when I click that to do it, it says restore fail. Its showing a picture of a USB cable with an arrow pointing upwards to an itunes symbol as if to say I need to connect. But when I do it wont connect with itunes. I have disabled my security and reinstalled itunes and still nothing. I have only had it about 7 weeks and this is the first time I have plugged it into my PC. Any thoughts please'

Thanks, I have tried that a number of times and it brings up errors -1, 14 and one other, cant remember what that was, it just wont do it. I have been using it overseas with a NZ sim card in it and have taken that out to see if that made a difference, just wont recover. Bit of a worry. Any other thoughts

Curve 8330 first time synch with data loaded into smartphone

With other smartphones, when I would perform my FIRST synch, if I did not take certain precautions (preset synch software to specific settings) I would wipe out all data on smartphone . Is this true for the Curve 8330? Are there specific settings so when I synch my phone for the first time with data I already loaded, I do not wipe it clean?

Hey TomPortua,
Welcome to the BlackBerry Support Community Forums.
The first synchronization does not erase the data on the BlackBerry Smartphone unless synchronization options are configured to "Replace all data in the target application", by default this is not selected if it is configured for Two way sync.
Have a look at this article for more information no configuring the Desktop software for Synchronization:
http://www.blackberry.com/btsc/KB23681
I hope this helps, cheers!
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

First time recording with digital drum kit in GB. Just got weak sound

Hi first timer here. Just bought a usb midi interface from Roland (umg-1g). It has midi in and midi out. My drum kit is Roland td3. My problem is that i get a weird sound that doesnt sound like my drums sounds like for me when playing. It sounds weak and empty with no real punch to it. Do any one have any idea of what I should do.
thnx !

Sebastianp wrote:
ut looks like GB has only one rock kit?
correct
Is there expansion kit for drums one have to buy ?
the rhythm section pack has several more kits:
http://www.bulletsandbones.com/GB/PluginsApplesJamPacks.html

First time ever with this problem, importing an mp3 album...

Greetings
I encountered a problem last night, and it's the first time ever that I see this happening.
I bought Sigur Ros' latest album from their website, as 320kbps mp3s, but for some reason, iTunes completely refuses to import or play it. No error messages, nothing happens at all.
WMP still plays it fine. I tried stripping all the ID tag info, renaming the tracks, to no avail.
I did email them telling of my problem but got no answer yet, so I thought I'd ask here in case someone has ever had the same issue...
I have more than 1050 albums, all either downloaded from sources like iTunes and eMusic or ripped from my own CDs... Never had this particular problem before!
Thanks

Hello!
I ran into this problem as well and it's driving me crazy. Glad to hear the you've contacted them and they're aware.
Here's how I solved it. It's totally lame tho... They have to fix the files!
- Load each file in Quicktime Pro.
- Save as a flat movie.
- Import the saved movie in iTunes.
As I said, totally lame but it worked and the saved movie even kept the tags intact (so I didn't have to re-enter all these funky track names).
The weird thing is that iTunes doesn't appear to be confused about this not being a movie file. Maybe it's because the movie is flat (its resolution is 0 x 0) so it just treats it like it would any MP3.
Anyhow, very frustrating to do the right thing and buy straight from the artist only to not have it load in my music library! As soon as those files are fixed, I plan on re-downloading.
Cheers!
Michel

Newbie: first time interfacing with existing site

Hi, first post here.
Our company has an existing website that was created several
years ago by someone no longer with the company. It is ColdFusion
based.
For the last few years, I have been in charge of site
management. I have no formal background or training as a webmaster,
so my experience growth has been awkward and unconventional.
I've been doing coding using a text editor to do direct html
manipulation. I then test "live" on our site, usually on a hidden
page. As my company grows, I have not had the time to keep up with
site expansion, and I have yet to date to find a reliable full time
or part time webmaster replacement for me (believe me, I've tried)!
So in the meantime, I have decided to see if I can simplify
my work using Dreamweaver.
So far, I am not off to a great start.
I have downloaded our entire site to our local networked
server in order to have a local architecture mirror. However, since
our local server does not have CF installed, I realize that I
cannot test locally.
I set up remote access to our web server, and Dreamweaver
connects successfully when I test in site management.
However, when I go to "remote view" or "testing server" and
accept the prompt to Get Dependent Files, I always end up with a
partially complete view of the page I want to see, with many
missing elements.
Am I asking too much from Dreamweaver, since in essence I am
asking it to come in and manage a very mature and extensively
developed site after the fact? Is the program able to fully
interface with any established site as long as its programming
language is supported?
Thanks for any basic advice here.
Tod

Sounds like maybe you haven't told us everything. Does your
site use
Coldfusion programming? If so, you can always download the
free
developer version and test locally.
As far as testing HTML locally, you don't need a remote
connection.
You can download the files to your computer and use the
Preview in
Browser to test the pages before you load them. And yes, you
should
be able to scroll up and down and see the entire page if it's
coded
properly.
Or am I totally misunderstanding your question?

First-time problem with buying games

Well I bought 2 iTunes cards and redeemed them, and then bought some SONGS with them. No problem. However, I go to buy a game and I am presented with a billing info page that I have to fill out. I do not own a credit card. So I choose "NONE" where it says billing form or type, hoping it would realize i have like $20.00 in iTunes card money, but nothing happens. I have purchased games from the store with my iTunes cards all the time. But now I have to have a credit card? Is there a way around this?

I was having the very same problem! I downloaded 3 movies at the same time, one of which was Troy (Directors cut). The first two flew by with no problems, now almost 24 hours later Troy is still downloading! I did restart the download around 9pm and this morning when I woke up only 15 minuets of the movie had started.
Now just as I came in here to ask for help- the movie jumped to 9 minuets left? Very confusing. I had sent apple an e-mail so when they get back to me I can post the reply here for you.

First time problem with a movie download

I bought a movie yesterday...and the download time is incredibly slow. I had other stuff in my queu that flew right through the download, but this one is just going so slow that it doesn't even give an estimated time of completion. I have tried to restart and resume this but still no go...then to top it off, itunes closed with an error and when I restarted it lost all the data that I had managed to get downloaded (15 mins of movie). Now it is restarting again, and I am waiting for a reply from apple as to why this one is slow when all others are so fast...
Anyone else experience this? Or have an idea on how to get it moving?

I was having the very same problem! I downloaded 3 movies at the same time, one of which was Troy (Directors cut). The first two flew by with no problems, now almost 24 hours later Troy is still downloading! I did restart the download around 9pm and this morning when I woke up only 15 minuets of the movie had started.
Now just as I came in here to ask for help- the movie jumped to 9 minuets left? Very confusing. I had sent apple an e-mail so when they get back to me I can post the reply here for you.

OIM: Invalid ManagerLogin during first time Recon with LDAPSync

Similar Messages

Maybe you are looking for