SAN problem in solaris:oracle couldn't start

Hi all
I am facing problem in one of the disk.One of the SAN disk is not mounted becuse of the same I couldn't able to start the oracle database.Our .user_dump_dest='/arch/dump/udump' are mounted on one of the disk (c1t1d0s0) on SAN.
#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr          ufs     1       yes     -
fd      -       /dev/fd fd      -       no      -
/proc   -       /proc   proc    -       no      -
/dev/dsk/c1t0d0s1       -       -       swap    -       no      -
/dev/dsk/c1t0d0s0       /dev/rdsk/c1t0d0s0      /       ufs     1       no
/dev/dsk/c1t1d0s0       /dev/rdsk/c1t1d0s0      /arch   ufs     2     yes
#/dev/dsk/c3t0d0s0      /dev/rdsk/c3t0d0s0      /bkp    ufs     2     yes
/dev/md/dsk/d0 /dev/md/rdsk/d0 /bkp    ufs     2     yes       -
swap    -       /tmp    tmpfs   -       yes     -
/dev/dsk/c3t1d0s0       /dev/rdsk/c3t1d0s0      /oracle         ufs     2     ye
s       -
#/dev/dsk/c1t1d0s1      /dev/rdsk/c1t1d0s1      /ai   ufs     1       -
~
~
~
$ df -bk
Filesystem            kbytes    used   avail capacity Mounted on
/dev/dsk/c1t0d0s0    10080200 2465407 7513991    25%    /
/proc                      0       0       0     0%    /proc
fd                         0       0       0     0%    /dev/fd
mnttab                     0       0       0     0%    /etc/mnttab
swap                 21534224      24 21534200     1%    /var/run
swap                 21534224      24 21534200     1%    /tmp
/dev/md/dsk/d0       109414630 88119292 20201192    82%    /bkp
/dev/dsk/c3t1d0s0    30983686 21056603 9617247    69%    /oracleCan anybody help me how to mount c1t1d0s0 the disk......

Laura:
getting an error
# mount -a
mount: /tmp already mounted
mount: /dev/md/dsk/d0 is already mounted, /bkp is busy,
        or the allowable number of mount points has been exceeded
mount: I/O error
mount: cannot mount /dev/dsk/c1t1d0s0
mount: /dev/dsk/c3t1d0s0 is already mounted, /oracle is busy,
        or the allowable number of mount points has been exceeded
# su -
Sun Microsystems Inc.   SunOS 5.8       Generic Patch   October 2001
You have mail.
# mount -a
mount: /dev/dsk/c3t1d0s0 is already mounted, /oracle is busy,
        or the allowable number of mount points has been exceeded
mount: /tmp already mounted
mount: I/O error
mount: cannot mount /dev/dsk/c1t1d0s0
mount: /dev/md/dsk/d0 is already mounted, /bkp is busy,
        or the allowable number of mount points has been exceeded
# mount /dev/dsk/c1t1d0s0 /arch
mount: I/O error
mount: cannot mount /dev/dsk/c1t1d0s0
#Edited by: user00726 on Apr 16, 2009 5:21 AM

Similar Messages

How do I map Hitachi SAN LUNs to Solaris 10 and Oracle 10g ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

Yes that is correct however due to use of Solaris 10 MPxIO multipathing software that we are using with the Hitachi SAN it does present an extra layer of complexity and issues with ASM configuration. Which means that ASM may get confused when it attempts to find the new LUNs from the Hitachi SAN at the Solaris OS level. Oracle Metalink note 396015.1 states this issue.
So my question is this: how to configure the ASM instance initialization parameter asm_diskstring to recognize the new Hitachi LUNs presented to the Solaris 10 host?
Lets say that I have the following new LUNs:
/dev/rdsk/c7t1d1s6
/dev/rdsk/c7t1d2s6
/dev/rdsk/c7t1d3s6
/dev/rdsk/c7t1d4s6
Would I set the ASM initialization parameter for asm_diskstring to /dev/rdsk/c7t1d*s6
as correct setting so that the ASM instance recognizes my new Hitachi LUNs? Solaris needs to map these LUNs using pseudo devices in the Solaris OS for ASM to recognize the new disks.
How would I set this up in Solaris 10 with Sun multipathing (MPxIO) and Oracle 10g RAC ASM?
I want to get this right to avoid the dreaded ORA-15072 errors when creating a diskgroup with external redundancy for the Oracle 10g RAC ASM installation process.

Couldn't start ORACLE ProcMGR V10gR3 with VS2008 service in Service

Hi All,
I couldn't start ORACLE ProcMGR V10gR3 with VS2008 service in Service. I've already done the steps in the manual guide Task 3-1-10: Setting Up the Windows Services for Oracle Tuxedo and also read a reference thread from this (http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx, Step5: Installing Oracle Tuxedo)
it prompt this:
Windows could not start the ORACLE ProcMGR V10gR3 with VS2008 service on Local Computer
Error 1069: The server did not start due to a logon failure
I create a user name: TUXADM and group it under Administrators
Any advise ?
Thanks.

I try using local system and restart my desktop and it can run. But can I use local system instead of administrators and new created users?

Strange problem oracle db is starting automatically

Friends,
OS: RHEL AS 3.0
DB: Oracle 9iR2
when ever my rhel server is starting/restarting oracle database is starting up automatically.
There is no crontab job either in the root user or in the oracle user.
Also, i checked in the oratab entry that also fine.
i checked in /etc/rc3.d there also nothing related to oracle.
what might be the reason?where i have to check for this?
thanks

is there any script related to oracle start/stop under /etc/init.d/
You can read here for more details on automating startup of db:
http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

VNCserver - run error - Couldn't start Xvnc; trying default font path.

Hi there,
I am trying to get vncserver running on a solaris 10 server and am floundering. When I run vnvcserver, I get the following:
Couldn't start Xvnc; trying default font path.
Please set correct fontPath in the vncserver script.
New 'X' desktop is unknown:12
Starting applications specified in //.vnc/xstartup
Log file is //.vnc/unknown:12.log
I have been trying suggestions from older forum posts and edited the /.vnc/xstartup file so it looks like below (the Fontpath line and the comment avove it were added by me
#!/bin/sh
xrdb $HOME/.Xresources
# Copied from picked http://www.realvnc.com/pipermail/vnc-list/2006-June/055196.html
FontPath = "/usr/openwin/lib/X11/fonts/misc/,/usr/openwin/lib/X11/fonts/75dpi/"
xsetroot -solid grey
xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
twm &
I have checked these directories and they both seem to have loads of font files - Could anyone suggest what I can do to move forward?
Thanks
Mo

@soldier1184:
Some cards require an older driver because nVidia dropped support for them in later drivers. (I don't know if the particular card the OP has is that case.) Also, just assuming an internet search to find out how to clean the nVidia drivers is a little bit jumping the gun, right? I mean, as long as the drivers were installed with pacman, they can be removed with pacman. Simply suggest:
sudo pacman -R nvidia nvidia-utils <other nvidia package(s)>
If that doesn't work, we can dig a bit deeper for sure.
@kaldøran:
Did you install anything new that caused this issue, or did you just boot up and have a problem? You said "you start to install your nVidia card", but later say you don't want nVidia. if You don't want the nVidia stuff, remove the package(s) and reboot and see how things go from there. If you didn't install anything new and this just started happening, can you boot to a terminal and run startx?

Problem on Installing Oracle 10g on Windows XP Professional

I'm getting the following error while I install Oracle 10g R1, on Windows XP Professional.
The Path enviroment variable is bigger than 1023 characters. This value cannont be set.
Has anyone seen this error before?

Hi,
you have two option to start your oracle service. your problem is your oracle serivce is not start.
for that you can start manully....
like
on command prompt.
cmd>net start oracleservice<sid>
or
you can set automatic for oracle service.
go services window. start >>>> run >>>> services.msc <<<enter>>>
check and select oracle services and right click and set automatic..
every time your system is reboot then oracle service is automatically is start.
regards
Taj

Problems to initiate oracle 10g express edition

Good afternoon I am speaking of Brazil with a text translator.
But I have installed Hundreds and I am trying to install oracle 10g express edition release 2.
I am with a problem in the Oracle 10g Express Edition in the installation part when I vo to initiate the service, it does not initiate.
And when I give I command /etc/init.d/oracle-xe status appears the following message: Your default context is user_u: system_r: unconfined_t. Of it you want you choose different one? [n]
I do not know more what to make to decide this.
I thank the attention.
Gabriel.
Message was edited by:
user523701

Oracle XE has it's own forum - to register and discuss XE problems with XE experts use URL http://www.oracle.com/technology/xe/registration
Once you have registered, you sign in to the forums and the link to the XE forum is there. But you do have to sign in as the user who registered XE.
You will also need to provide a few more pieces of information:
1) actual distro and version of Linux
2) userid used to install XE (should be root)
3) userid used to run "/etc/init.d/oracle-xe start" (should be root)

LMS 2.6 CTMJrmServer SERVICE Couldn't start

Dear,
I just installed a LMS 2.6 system on a Windows 2003 server, after install and patch install, I fould that the RME couldn't work normally. The inventory job couldn't work, such as archive the configuration, many devices got error message as: CM0208 User not authorised to perform operations on device
I checked the process, found that CTMJrmServer is in status as Administrator has shut down this server, and couldn't start it.
In the CTMJrmServer.log, found message as :
CTMJrmServer: initializing daemon manager
CTMJrmServer: initialized daemon manager
[ Fri Feb 11 15:37:46 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.util.logger.ServiceLogLevelChanger,notifyLevelChange,35,publishing urn for jrmw-log
[ Fri Feb 11 15:37:48 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.util.logger.ServiceLogLevelChanger,notifyLevelChange,42,published urn as jrmw-log-RMELogLevelChange
[ Fri Feb 11 15:37:48 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,117,getJRM: bind successful
[ Fri Feb 11 15:37:48 CST 2011 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,242,ERROR: Could not establish connection with JRM
[ Fri Feb 11 15:37:48 CST 2011 ],ERROR,[main],com.cisco.nm.rmeng.jrmwrapper.server.CTMJobManagerServer,<init>,66,Null JRM. Exiting
Is there any one could help to check what is the prblem?

Dear Joseph,
I am using the TACAS, this morning, I found the problem, username and password configuration missed after I changed the authentication method to TACAS, I re-configured them, it is OK now.
But currently I still find the result of my inventory collection jobs are all failed, it seems that the LMS 2.6 couldn't sucessfully collect device information in RME. All the devices information including credentials are imported form a xml file I expert form the old system.
Is there any idea you know why all the inventory jobs failed?
Thanks!

Oracle does not start

Hi,
I have installed oracle 11g r1 on centos. When the pc is connected to network, then I have no problem to spart oracle, else the oracle does not starts.
What can I do to start oracle with or without internet connection.
On windows I used a loopback adapter. Is here any method?
Thank you

Hello,
ORA-12157: TNS:internal network communication errorThis Note of My Oracle Support may give you some solution:
Local Connections Are Not Working ORA-12157 "TNS:internal network communication error" [ID 399342.1]Is the Loopback Interface well configured ?
http://www.informit.com/articles/article.aspx?p=25845
From the below documentation:
http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/pre_install.htm#BABFHCJG
"+When you run the ping command on the computer itself, the ping command should return the IP address of the computer.+"
Hope this help.
Best regards,
Jean-Valentin

Problem in installing oracle 8i in windows xp pro(Urgent)

Hi,
After installing oracle 8i in windows xp it worked correctly the first time. I did not close the database and i shut down windows. After that when i login in sql it does not work. it comes as oracle database not found. Can anyone help pleese

Hi,
you have two option to start your oracle service. your problem is your oracle serivce is not start.
for that you can start manully....
like
on command prompt.
cmd>net start oracleservice<sid>
or
you can set automatic for oracle service.
go services window. start >>>> run >>>> services.msc <<<enter>>>
check and select oracle services and right click and set automatic..
every time your system is reboot then oracle service is automatically is start.
regards
Taj

Problem restarting my Oracle WebLogic Server 10.3

I am having a problem restarting my Oracle WebLogic Server 10.3.
If I try to restart or republish my server, it gives me the error 'weblogic.management.ManagementException: Unable to obtain lock on D:\user_projects\userdomain\servers\AdminServer\tmp\AdminServer.lok. Server may already be running'.
This problem happens only when the server is inactive for a while. Say, if I leave the server running overnight without any activity, the server state reads stopped in the morning, even though background java processes are still running. Now, at this point, it doesn't let me restart or republish my server until I explicitly kill all the java process from windows task manager.
Any help to solve this highly frustrating problem is gratefully appreciated. BTW, this happens on development systems, running on windows, using Oracle Workshop for WebLogic v10.3.
There are 1 nested errors:
weblogic.management.ManagementException: Unable to obtain lock on D:\user_projects\userdomain\servers\AdminServer\tmp\AdminServer.lok. Server may already be running
     at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
     at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:58)
     at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:73)
     at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:459)
     at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:164)
     at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
     at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
     at weblogic.Server.main(Server.java:67)
>
<May 11, 2009 9:16:50 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<May 11, 2009 9:16:50 AM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<May 11, 2009 9:16:50 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
Thanks.

SAP NW CE 7.2 Distributed Install on Solaris/Oracle Issues

Hi,
has anyone used the current Installation DVD (51038030) to install a distributed CE 7.2 system. SAPInst fails to install the SCS instance and doesn't unpack the kernel etc as part of the process. The CE 7.1 DVD for Solaris/Oracle installs ok after I downloaded the new control xml which was atached to OSS 1249364. I've got a high priority message open with SAP on the problems with the CE 7.2 installation but thought I'd see if anyone else has encountered any issues with the 7.2 Solaris/Oracle installation.
Regards,
Brian.

Hi,
has anyone used the current Installation DVD (51038030) to install a distributed CE 7.2 system. SAPInst fails to install the SCS instance and doesn't unpack the kernel etc as part of the process. The CE 7.1 DVD for Solaris/Oracle installs ok after I downloaded the new control xml which was atached to OSS 1249364. I've got a high priority message open with SAP on the problems with the CE 7.2 installation but thought I'd see if anyone else has encountered any issues with the 7.2 Solaris/Oracle installation.
Regards,
Brian.

Problems with Solaris 11 11/11

Hi,
I need your help because I have problems with Solaris 11 11/11 installed in a Dell Latitude E4310.
Here, there are the problems:
1- No it power off with shutdown or init 5 or init 0 only work well the reboot.
2- It can not connect to the wifi with wpa, no receive ip by dhcp, the driver of the card is "iwp"
Thanks.
Jorge
Edited by: jdangelo on Nov 16, 2011 1:49 PM
Edited by: jdangelo on Nov 17, 2011 2:51 PM

Here is the info of my laptop;
Manufacture name:Dell Inc.
Manufacture model:Latitude E4310
64 Bit:True
OS version:SunOS solaris 5.11 11.0 i86pc i386 i86pc
CPU Type:Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz
CPU Number:1
Number Of Cores Per Processor:2
Number Of Threads Per Processor:4
Bios/Firmware Maker:Dell Inc. Version:A05 Release Date:11/20/2010
prtconf -pv:
System Configuration: Oracle Corporation i86pc
Memory size: 3958 Megabytes
System Peripherals (PROM Nodes):
Node 0x000001
bios-boot-device: '80'
stdout: 00000000
name: 'i86pc'
Node 0x000002
existing: 00c21000.00000000.02bc6001.00000000
name: 'ramdisk'
Node 0x000003
acpi-namespace: '\_SB_.PCI0'
compatible: 'pciex_root_complex'
device_type: 'pciex'
reg: 00000000.00000000.00000000.00000000.00000000
#size-cells: 00000002
#address-cells: 00000003
name: 'pci'
Node 0x000004
reg: 00000000.00000000.00000000.00000000.00000000
compatible: 'pci8086,44.1028.410.2' + 'pci8086,44.1028.410' + 'pci1028,410' + 'pci8086,44.2' + 'pci8086,44' + 'pciclass,060000' + 'pciclass,0600'
model: 'Host bridge'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00060000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000044
name: 'pci1028,410'
Node 0x000005
acpi-namespace: '\_SB_.PCI0.VID_'
assigned-addresses: 83001010.00000000.f0000000.00000000.00400000.c3001018.00000000.e0000000.00000000.10000000.81001020.00000000.000060b0.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
reg: 00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00400000.43001018.00000000.00000000.00000000.10000000.01001020.00000000.00000000.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
compatible: 'pci8086,46.1028.410.2' + 'pci8086,46.1028.410' + 'pci1028,410' + 'pci8086,46.2' + 'pci8086,46' + 'pciclass,030000' + 'pciclass,0300'
model: 'VGA compatible controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
device_type: 'display'
unit-address: '2'
class-code: 00030000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000046
name: 'display'
Node 0x000006
acpi-namespace: '\_SB_.PCI0.GLAN'
assigned-addresses: 8200c810.00000000.f5400000.00000000.00020000.8200c814.00000000.f5480000.00000000.00001000.8100c818.00000000.00006040.00000000.00000020
reg: 0000c800.00000000.00000000.00000000.00000000.0200c810.00000000.00000000.00000000.00020000.0200c814.00000000.00000000.00000000.00001000.0100c818.00000000.00000000.00000000.00000020
compatible: 'pci8086,10ea.1028.410.5' + 'pci8086,10ea.1028.410' + 'pci1028,410' + 'pci8086,10ea.5' + 'pci8086,10ea' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '19'
class-code: 00020000
revision-id: 00000005
vendor-id: 00008086
device-id: 000010ea
name: 'pci1028,410'
Node 0x000007
acpi-namespace: '\_SB_.PCI0.EHC2'
assigned-addresses: 8200d010.00000000.f5470000.00000000.00000400
reg: 0000d000.00000000.00000000.00000000.00000000.0200d010.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b3c.1028.410.5' + 'pci8086,3b3c.1028.410' + 'pci1028,410' + 'pci8086,3b3c.5' + 'pci8086,3b3c' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1a'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b3c
name: 'pci1028,410'
Node 0x000008
acpi-namespace: '\_SB_.PCI0.HDEF'
assigned-addresses: 8300d810.00000000.f5460000.00000000.00004000
reg: 0000d800.00000000.00000000.00000000.00000000.0300d810.00000000.00000000.00000000.00004000
compatible: 'pciex8086,3b57.1028.410.5' + 'pciex8086,3b57.1028.410' + 'pciex8086,3b57.5' + 'pciex8086,3b57' + 'pciexclass,040300' + 'pciexclass,0403' + 'pci8086,3b57.1028.410.5' + 'pci8086,3b57.1028.410' + 'pci1028,410' + 'pci8086,3b57.5' + 'pci8086,3b57' + 'pciclass,040300' + 'pciclass,0403'
model: 'Mixed Mode device'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1b'
class-code: 00040300
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b57
name: 'pci1028,410'
Node 0x000009
acpi-namespace: '\_SB_.PCI0.RP01'
slot-names: 00000001.746f6c53.00003333
reg: 0000e000.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b42.5' + 'pciex8086,3b42' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b42.5' + 'pci8086,3b42' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00005000.81000000.00000000.00005000.00000000.00001000.82000000.00000000.f4000000.82000000.00000000.f4000000.00000000.01400000
bus-range: 00000001.00000001
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000000
devsel-speed: 00000000
interrupts: 00000001
unit-address: '1c'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b42
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b42'
Node 0x00000a
acpi-namespace: '\_SB_.PCI0.RP02'
slot-names: 00000001.746f6c53.00003433
reg: 0000e100.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b44.5' + 'pciex8086,3b44' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b44.5' + 'pci8086,3b44' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00004000.81000000.00000000.00004000.00000000.00001000.82000000.00000000.f2c00000.82000000.00000000.f2c00000.00000000.01400000
bus-range: 00000002.00000002
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000001
devsel-speed: 00000000
interrupts: 00000002
unit-address: '1c,1'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b44
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b44'
Node 0x000013
acpi-namespace: '\_SB_.PCI0.RP02.PXSX'
assigned-addresses: 83020010.00000000.f2c00000.00000000.00002000
reg: 00020000.00000000.00000000.00000000.00000000.03020010.00000000.00000000.00000000.00002000
compatible: 'pciex8086,422c.8086.1321.35' + 'pciex8086,422c.8086.1321' + 'pciex8086,422c.35' + 'pciex8086,422c' + 'pciexclass,028000' + 'pciexclass,0280' + 'pci8086,422c.8086.1321.35' + 'pci8086,422c.8086.1321' + 'pci8086,1321' + 'pci8086,422c.35' + 'pci8086,422c' + 'pciclass,028000' + 'pciclass,0280'
model: 'Network controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00008086
subsystem-id: 00001321
unit-address: '0'
class-code: 00028000
revision-id: 00000035
vendor-id: 00008086
device-id: 0000422c
name: 'pci8086,1321'
Node 0x00000b
acpi-namespace: '\_SB_.PCI0.RP03'
slot-names: 00000001.746f6c53.00000038
reg: 0000e200.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b46.5' + 'pciex8086,3b46' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b46.5' + 'pci8086,3b46' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00003000.81000000.00000000.00003000.00000000.00001000.82000000.00000000.f1800000.82000000.00000000.f1800000.00000000.01400000
bus-range: 00000003.00000003
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000002
devsel-speed: 00000000
interrupts: 00000003
unit-address: '1c,2'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b46
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b46'
Node 0x000014
acpi-namespace: '\_SB_.PCI0.RP03.PXSX'
assigned-addresses: 82030010.00000000.f1830000.00000000.00000100
reg: 00030000.00000000.00000000.00000000.00000000.02030010.00000000.00000000.00000000.00000100
compatible: 'pciex1180,e822.1028.410.1' + 'pciex1180,e822.1028.410' + 'pciex1180,e822.1' + 'pciex1180,e822' + 'pciexclass,080500' + 'pciexclass,0805' + 'pci1180,e822.1028.410.1' + 'pci1180,e822.1028.410' + 'pci1028,410' + 'pci1180,e822.1' + 'pci1180,e822' + 'pciclass,080500' + 'pciclass,0805'
model: 'SD Host controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00080500
revision-id: 00000001
vendor-id: 00001180
device-id: 0000e822
name: 'pci1028,410'
Node 0x00000c
acpi-namespace: '\_SB_.PCI0.RP04'
slot-names: 00000001.746f6c53.00000039
reg: 0000e300.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b48.5' + 'pciex8086,3b48' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b48.5' + 'pci8086,3b48' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.f0400000.82000000.00000000.f0400000.00000000.01400000
bus-range: 00000004.00000009
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000003
devsel-speed: 00000000
interrupts: 00000004
unit-address: '1c,3'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b48
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b48'
Node 0x00000d
acpi-namespace: '\_SB_.PCI0.EHCI'
assigned-addresses: 8200e810.00000000.f5450000.00000000.00000400
reg: 0000e800.00000000.00000000.00000000.00000000.0200e810.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b34.1028.410.5' + 'pci8086,3b34.1028.410' + 'pci1028,410' + 'pci8086,3b34.5' + 'pci8086,3b34' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1d'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b34
name: 'pci1028,410'
Node 0x00000e
acpi-namespace: '\_SB_.PCI0.P0P1'
slot-names: 0000002f.746f6c53.6c530031.0032746f.746f6c53.6c530033.0034746f.746f6c53.00000032
reg: 0000f000.00000000.00000000.00000000.00000000
compatible: 'pci8086,2448.a5' + 'pci8086,2448' + 'pciclass,060401' + 'pciclass,0604'
model: 'Subtractive Decode PCI-PCI bridge'
bus-range: 0000000a.0000000a
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pci'
power-consumption: 00000001.00000001
devsel-speed: 00000000
unit-address: '1e'
class-code: 00060401
revision-id: 000000a5
vendor-id: 00008086
device-id: 00002448
name: 'pci8086,2448'
Node 0x00000f
#size-cells: 00000001
#address-cells: 00000002
ranges: 00000001.00000000.81000000.00000000.00000000.00000022.00000001.00000024.81000000.00000000.00000024.00000002.00000001.00000028.81000000.00000000.00000028.00000002.00000001.0000002c.81000000.00000000.0000002c.00000006.00000001.00000034.81000000.00000000.00000034.00000002.00000001.00000038.81000000.00000000.00000038.00000002.00000001.0000003c.81000000.00000000.0000003c.00000002.00000001.00000040.81000000.00000000.00000040.00000004.00000001.0000004e.81000000.00000000.0000004e.00000006.00000001.00000060.81000000.00000000.00000060.00000002.00000001.00000063.81000000.00000000.00000063.00000003.00000001.00000067.81000000.00000000.00000067.00000001.00000001.00000070.81000000.00000000.00000070.00000008.00000001.00000070.81000000.00000000.00000070.00000001.00000001.00000080.81000000.00000000.00000080.00000022.00000001.000000a4.81000000.00000000.000000a4.00000002.00000001.000000a8.81000000.00000000.000000a8.00000002.00000001.000000ac.81000000.00000000.000000ac.00000002.00000001.000000b0.81000000.00000000.000000b0.00000006.00000001.000000b8.81000000.00000000.000000b8.00000002.00000001.000000bc.81000000.00000000.000000bc.00000002.00000001.000000c0.81000000.00000000.000000c0.00000020.00000001.000000f0.81000000.00000000.000000f0.00000001.00000001.00000400.81000000.00000000.00000400.00000080.00000001.000004d0.81000000.00000000.000004d0.00000002.00000001.00000500.81000000.00000000.00000500.00000080.00000001.00000680.81000000.00000000.00000680.00000020.00000001.00000930.81000000.00000000.00000930.00000001.00000001.00000934.81000000.00000000.00000934.00000001.00000001.00000cf8.81000000.00000000.00000cf8.00000008.00000001.00001000.81000000.00000000.00001000.00000014.00000001.0000164e.81000000.00000000.0000164e.00000002.00000001.0000ffff.81000000.00000000.0000ffff.00000001.00000000.f54c0000.82000000.00000000.f54c0000.00001000.00000000.f8000000.82000000.00000000.f8000000.04000000.00000000.fed00000.82000000.00000000.fed00000.00000400.00000000.fed10000.82000000.00000000.fed10000.00004000.00000000.fed18000.82000000.00000000.fed18000.00002000.00000000.fed1c000.82000000.00000000.fed1c000.00024000.00000000.fed45000.82000000.00000000.fed45000.0004b000.00000000.fee00000.82000000.00000000.fee00000.00100000.00000000.ff000000.82000000.00000000.ff000000.01000000.00000000.ff000000.82000000.00000000.ff000000.01000000
acpi-namespace: '\_SB_.PCI0.LPCB'
device_type: 'isa'
reg: 0000f800.00000000.00000000.00000000.00000000
compatible: 'pci8086,3b0f.1028.410.5' + 'pci8086,3b0f.1028.410' + 'pci1028,410' + 'pci8086,3b0f.5' + 'pci8086,3b0f' + 'pciclass,060100' + 'pciclass,0601'
model: 'ISA bridge'
power-consumption: 00000001.00000001
devsel-speed: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f'
class-code: 00060100
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b0f
name: 'isa'
Node 0x00001c
unit-address: '1,60'
interrupts: 00000001.0000000c
reg: 00000001.00000060.00000001.00000001.00000064.00000001
name: 'i8042'
Node 0x00001d
compatible: 'pnpPNP,303'
device-type: 'keyboard'
interrupts: 00000001.0000000c
reg: 00000000
acpi-namespace: '\_SB_.PCI0.LPCB.PS2K'
model: 'System keyboard'
name: 'keyboard'
Node 0x00001e
compatible: 'pnpPNP,f03'
device-type: 'mouse'
reg: 00000001
interrupts: 0000000c
acpi-namespace: '\_SB_.PCI0.LPCB.PS2M'
model: 'PS/2 Port for PS/2-style Mice'
name: 'mouse'
Node 0x00001f
interrupts: 00000004
reg: 00000001.000003f8.00000008
model: 'Standard serial port'
compatible: 'PNP0500'
name: 'asy'
Node 0x000010
acpi-namespace: '\_SB_.PCI0.SAT0'
assigned-addresses: 8100fa10.00000000.00006090.00000000.00000008.8100fa14.00000000.00006080.00000000.00000004.8100fa18.00000000.00006070.00000000.00000008.8100fa1c.00000000.00006060.00000000.00000004.8100fa20.00000000.00006020.00000000.00000020.8200fa24.00000000.f5440000.00000000.00000800
reg: 0000fa00.00000000.00000000.00000000.00000000.0100fa10.00000000.00000000.00000000.00000008.0100fa14.00000000.00000000.00000000.00000004.0100fa18.00000000.00000000.00000000.00000008.0100fa1c.00000000.00000000.00000000.00000004.0100fa20.00000000.00000000.00000000.00000020.0200fa24.00000000.00000000.00000000.00000800
compatible: 'pci8086,3b2f.1028.410.5' + 'pci8086,3b2f.1028.410' + 'pci1028,410' + 'pci8086,3b2f.5' + 'pci8086,3b2f' + 'pciclass,010601' + 'pciclass,0106'
model: 'SATA AHCI 1.0 Interface'
power-consumption: 00000001.00000001
66mhz-capable:
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,2'
class-code: 00010601
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b2f
name: 'pci1028,410'
Node 0x000011
acpi-namespace: '\_SB_.PCI0.SBUS'
assigned-addresses: 8300fb10.00000000.f5430000.00000000.00000100.8100fb20.00000000.00006000.00000000.00000020
reg: 0000fb00.00000000.00000000.00000000.00000000.0300fb10.00000000.00000000.00000000.00000100.0100fb20.00000000.00000000.00000000.00000020
compatible: 'pci8086,3b30.1028.410.5' + 'pci8086,3b30.1028.410' + 'pci1028,410' + 'pci8086,3b30.5' + 'pci8086,3b30' + 'pciclass,0c0500' + 'pciclass,0c05'
model: 'SMBus (System Management Bus)'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,3'
class-code: 000c0500
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b30
name: 'pci1028,410'
Node 0x000012
assigned-addresses: 8300fe10.00000000.f5420000.00000000.00001000
reg: 0000fe00.00000000.00000000.00000000.00000000.0300fe10.00000000.00000000.00000000.00001000
compatible: 'pci8086,3b32.1028.410.5' + 'pci8086,3b32.1028.410' + 'pci1028,410' + 'pci8086,3b32.5' + 'pci8086,3b32' + 'pciclass,118000' + 'pciclass,1180'
model: 'DSP/DAP controllers'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,6'
class-code: 00118000
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b32
name: 'pci1028,410'
Node 0x000015
device_type: 'acpirootnex'
compatible: 'SOLA0001' + 'acpirootnex' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\'
name: 'fw'
Node 0x000016
unit-address: '1'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000000
acpi-processor-id: 00000001
acpi-namespace: '\_PR_.CPU0'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000017
unit-address: '2'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000004
acpi-processor-id: 00000002
acpi-namespace: '\_PR_.CPU1'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000018
unit-address: '3'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000001
acpi-processor-id: 00000003
acpi-namespace: '\_PR_.CPU2'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000019
unit-address: '4'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000005
acpi-processor-id: 00000004
acpi-namespace: '\_PR_.CPU3'
device_type: 'acpicpu'
name: 'cpu'
Node 0x00001a
unit-address: '0'
compatible: 'acpidevice' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\_SB_'
device_type: 'acpidevice'
name: 'sb'
Node 0x00001b
io-space: 00000000.00000020.00000020.00000002.00000024.00000002.00000028.00000002.0000002c.00000002.0000002e.00000002.00000030.00000002.00000034.00000002.00000038.00000002.0000003c.00000002.00000040.00000004.0000004e.00000002.00000050.00000004.00000060.00000001.00000061.00000001.00000063.00000001.00000064.00000001.00000065.00000001.00000067.00000001.00000070.00000008.00000070.00000001.00000080.00000001.00000081.00000011.00000092.00000001.00000093.0000000d.000000a0.00000002.000000a4.00000002.000000a8.00000002.000000ac.00000002.000000b0.00000002.000000b2.00000002.000000b4.00000002.000000b8.00000002.000000bc.00000002.000000c0.00000020.000000f0.00000001.00000400.00000080.000004d0.00000002.00000500.00000080.00000680.00000020.00000930.00000001.00000934.00000001.00000cf8.00000008.00001000.00000004.00001004.00000010.0000164e.00000002.0000ffff.00000001
device-memory: f54c0000.00001000.f8000000.04000000.fed00000.00000400.fed10000.00004000.fed18000.00001000.fed19000.00001000.fed1c000.00004000.fed20000.00020000.fed45000.0004b000.fee00000.00100000.ff000000.01000000.ff000000.01000000
dma-channels: 00000004
interrupts: 00000000.00000001.00000002.00000008.0000000c.0000000d
name: 'used-resources'
prtdiag:
System Configuration: Dell Inc. Latitude E4310
BIOS Configuration: Dell Inc. A05 11/20/2010
==== Processor Sockets ====================================
Version Location Tag
Intel(R) Core(TM) i5 CPU M 560 @ 2.67GH CPU 1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
Unknown in use 0 DIMM_A BANK 0
unknown empty 0 DIMM_B BANK 2
==== On-Board Devices =====================================
"Intel GM45 Graphics"
NETWORK_NAME_STRING
==== Upgradeable Slots ====================================
ID Status Type Description
0 available PCI Express x16 J5C1
1 available PCI Express J6C2
2 in use PCI Express J6D2
3 in use PCI Express J7C1
4 available PCI Express J7D2
System Information:
Manufacturer:Dell Inc.
Product:Latitude E4310
BIOS Information:
Vendor:Dell Inc.
Version:A05
Release Date:11/20/2010
BIOS Revision: BIOS Revision:4.6
Firmware Revision:
MotherBoard Information:
Product:0D8H24
Manufacturer:Dell Inc.
Version:A00
Onboard Devices:[Video,Disabled]"Intel GM45 Graphics"
CPU Information:
Processor 0:
Processor Socket Type:CPU 1
Processor Manufacturer:Intel
Current Voltage:0.0V
External Clock:533MHZ
Max Speed:4000MHZ
Current Speed:2666MHZ
Memory Information:
Physical Memory: 4G (4G)
Maximum Memory Support: 4096G
Memory Subsystem 0:
Array Used Function:System memory
Memory Error Correction Supported:None
Maximum Array Capacity:8G
Number of Memory Devices:2
Memory Device 0:
Memory Device Locator:DIMM_A
Total Width:64
Data Width:64
Installed Size:4096M
Memory Device Type:Unknown
Speed:1067MHZ
Memory Device 1:
[Not Installed]

Import/Export problems after patching oracle from 9.2.0.1 to 9.2.0.5

Hi, After I applied the 5 patch to oracle 9201 on Win XP the export utility has started to complain about
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
And after I applied catexp.sql script, it didn't fix the issue with export, the error message has become like this:
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Can someone advise, what's wrong with it? With oracle 9.2.0.1 export worked fine, after upgrade to 9.2.0.5 it fails every time it gets to the table data export stage.
Thanks in advise

It seems that you have found an answer in other forum :
Imp/Exp problems after patching oracle to 9205
Nicolas.

SAN problem in solaris:oracle couldn't start

Similar Messages

Maybe you are looking for