SAP* and DDIC passwords for new clients in Sol Man 4.0

Hello all,
I just recently finished a Solution Manager 4.0 on Windows 2003 server box. Then, I performed some of the post installation steps until I had to create a new client. So, I went to scc4 and created a new client. When trying to get access to this new client through SAP*, the default password did not work and the entries were not created in the table usr02. Also, I tried to insert the missing entries into the usr02 table, but had no success after all.
I hope some of you can help on this, because I am stucked on it.
Regards,
Luis Alberto Zeró

Hi guys ..
i thing you can check in Document Installation guide Solution manager on Page 108
If you install a new ABAP or ABAP+Java system, in most cases you do not need to perform the client copy for
the ABAP stack. SAPinst creates three ABAP clients during the installation, client 000, client 001, and client 066.
You can use client 001 for production.
The following procedure describes how to perform a client copy manually. We recommend that you
use client 001 as source client.
Caution
If you want to use a client other than the default of 001 as your production client, you have to reconnect
the Java part to the production client as described in SAP Note 937323.
Procedure
1. Maintain the new client with transaction SCC4.
2. Activate kernel user SAP*:
 a) Set the profile parameter
 Login/no_automatic_user_sapstar to 0.
 b) Restart the application server.
3. Log on to the new client with kernel user SAP* and password PASS.
4. Copy the client with transaction SCCL and profile SAP_CUST.
5. Check the log files with transaction SCC3.
6. Deactivate kernel user SAP*:
 a) Reset login/no_automatic_user_sapstar to 1.
Caution
 You create SAP system user SAP* on the new client
 before resetting
login/no_automatic_user_sapstar.
 b) Restart the application server.
rgds
echo

Similar Messages

Default sap* password for new client copy ?

Hi Basis Expert,
What is the default password for sap*, i have create new client with SCC4 and i tried to login but failed.
please advise what is the default password for sap*.
i am using Netweaver 7.0 SP16.
Thank you and best regards
Fernand

Hi!
If you followed the procedure, you should have set the profile parameter login/no_automatic_user_sapstar to 0 and restarted application server. After that you can login using SAP* and password PASS.

SAP* and DDIC password is not working in Cleint 000

Hi,
I have Installed ECC 6.0 IDES Server on Windows 2k3 with Oracle database. First time i was able to login to 000 client with SAP* (default pwd) and did some post installation steps. Now the password is not working.
I tried the following:
Go to cmd prompt.
Sqlplus /nolog
conn /as sysdba
sqlplus>UPDATE SAPSR3.usr02 set uflag=0 where mandt='000' and uflag=128;
All the SAP users were Unlocked.
Then i tried delete command.
sqlplus>DELETE SAPSR3.usr02 where mandt='000' and bname='SAP*';
it says " 0 rows deleted "
Parameter login/no_automatic_user_sapstar= 0 is set.
Then Restarted the SAP server and tried logging with password pass it says user and password incorrect.

Hi,
As I have given in the earlier pls go through that link.
And also ...It is good practice to put back the automatic sapstar to 1 as this will not allow other to use same way as sap* /pass and log into the client.
The first thing is like create one more user in the 000 ,and also other super user incase if you have to use 000 with super user and have your own mechanism like have cutomised program and tcode with which you can activate 000 super user and use some thing like this...or it is only known to SAP BAsis Administrator.etc..
And also do not work on 000 for regular development or prd work make a copy of this client and start using them .
This has to be used only for Support pack other SAp related activities.
The first step after installation is to make a copy of these refrence clients.And start using them.
Secondly create the sap* usermaster in 000 and remove profiles .
And enable parameter login/no_automatic_user_sapstar to 1.
with this we are securing the super user from misuse.
Incase of emergency you need to delete the sap* user master from Oracle level then activate the prifile parameter and the loginto the 000 client using sap*/Pass.
Hope this helps.
Get back if you need more information.
Thanks.

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

How to reset ddic password for client 000 in MSSQL 2005 database

SAP = ECC6
DB = MSSQL 2005
client = 000
1. SAP* account was removed from the DB, can't be found in USR02 table.
2. Only left ddic account and was locked. How can i reset ddic password?
3. How can i unlock and reset my own password from the MSSQL database?

You can unlock and reset passwords for DDIC and for your own user id in the following way:
Please execute the below queries at your database level:
To unlock user ids:
SQL>update SAP<SID>.usr02 set flag=0 where bname="*user id*" and mandt=client number;
SQL>commit;
To reset the passwords:
SQL>update SAP<SID>.usr02 set bcode="encrypted password" where bname="*user id*" and mandt=client number;
SQL>commit;
Then log into the system and execute /$sync
hope this will help you.
Regards,
FAisal

Complete Customising step to implement SAP PP module for New client.

hi frnds,
Can Any body tell me that wht are the intial to final step to be follow(step-by-step) to configure & customise the SAP PP Module for new Client.Suppose industry is Process Industry.
I'll be graceful to all who help in this regard.
Thanks
Parminder

Hi Parminder,
Go to Transaction OPPQ- Maintain Plant paramets, OPPR-Maintain MRP groups and copy the setting from Plant 1000 to your new Plant.
Then create new items again by copying the standard ones.
Thanks and regards
Muruegsan

SAP GUI not working with SAP* and DDIC default passwords

Hi SAP Guru's ,
at last I installed the SAP ECC6.0 on Windows 2003 (stand alone) with Oracle 10G database.
I installed the SAP GUI , when I am trying to loging from SAP GUI clients 000 and 001 with SAP* and DDIC user accounts I am naot able to login . please give me the how to configure this .
thanks in advance
Edited by: srinivas kaveti on Apr 4, 2008 9:16 PM

Hi Srinivas,
You should set "login/no_automatic_user_sapstar=0", in the SAP profile. With ECC 6.0, default sapstar user deactivated. You can take a look at OSS note #68048, for detailed information.
Best regards,
Orkun Gedik

My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again.

SAP* and DDIC locked and SQL commands not working

Dear All,
We work on ECC6 and SQL 2005 as database.Somehow our SAP* and DDIC user gets locked in production server client 240 and SID AEP
I tried the following things but none worked.Every time getting error.
1. First i tried to run the following command in SQLPLUS mode
in th command prompt i typed sqlplus / nolog(then enter)
I got the following error sqlplus is not recognized as an internal or external command,operable program or batch file.
2 Then i thought may be we work on SQL database we may already be in the SQLprompt.Still when i typed conn / as sysdba,same error
conn is not recognized as an internal or external command,operable program or batch file.
3.Then i again go to the command prompt and typed
delete* from sap<AEP>.usr02, where BNAME = ' sap* ' and MANDT = ' 240 '
This time I get the system cannot find the file specified
Anyone can please clear my following doubt.
1. Am I requiredto go in SQLPLUS mode even when we have SQL Database.
2. How to unlock this SAP* and other super users.Cause yesterday somebody must have tried to login to sap*,ddic,and sapbasis and in the process locked all by entering the wrong password.
PS: Other users are working as we have role based authorization
Help will be highly obliged
Regards,
Ashutosh

Hello, ive got a problem with the SAPDB abd SAP* and DDIC in Client 000
in our PROD 000 client we forgot the password for SAP* , DDIC and cannot delete it.
Now the account was locked. please help how to reset SAP * this account on SAPDB.
Its DB Versio 7.7! I read a lot about that! Please, step by step, is that a problem of interface sqlcli, or rights?
Please could somebody give me an feedback about sqlcli, could i delete it with this tool the user? Because SQL studio is damaged on that server. Failed installation,Will not work! could not remove!
I have to configure the server! sorry, i am not so much familar with SAPDB
in old releases the shema is SAPR3 the new (NW 7) is SAPSR3.
Checked 701!
please set login/no_automatic_user_sapstar to 0.= Done!
At sql propmt: Thats no SAPDB sqxli command, right!!!!
select * from sapsr3.usr02 where bname='sap*' and mandt='000';
Thats doesnt work!
When i logon with the superdba , the connect is fine!
After the command execute
D:\sapdb>sqlcli -U DEFAULT delete from sapsr3DB.usr02 where bname='sap*' and mandt ='000';
-10757: XUSER error (the USERKEY is unknown)
select * from sapsr3.usr02 where bname='sap*' and mandt='000'; Doesnt work!
What the hell is the error??? Doesnt find the answer, before, i get the same error then the other colleagues
unknown table USR02! Is this superdba? Rights of DBA??
please give an step by step advice. Logon with..... before ... choose sqlci..............sqlcli, \? + sql execute......
Kind regards
Ralph

Whats the functional difference between user IDs SAP* and DDIC?

Whats the functional difference between SAP* and DDIC? Can any one tell me please. I am new here. Thanks in advance.

Hi Farooq,
There are three user IDs in various SAP clients.
1. SAP* (Client 000 and 001)
SAP* denotes the default super user and has all administrative powers.
2. DDIC (Client 000 and 001)
DDIC user is responsible for the maintenance of the ABAP/4 Dictionary and the software logistics.
3. EarlyWatch (Client 066)
The EarlyWatch user has access only to monitoring and performance data.
Please check this link for more information on data dictionary objects.
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ea31446011d189700000e8322d00/content.htm
Hope this will help.
Regards,
Ferry Lianto

Log on Details for new client

hi experts,
I created the client 820 by using scc4 how can i create the password for that client to log in .
please give me solution asap.
Thanks ,
K.Rajesh.

Rajesh,
i would suggest you please close this thread and open new one in Basis forum am sure you will get better and good reply there.
its an ABAP section.
Amit.

Reset encryption password for NEW iPhone backups

Hello Everyone,
I have an iPhone and iPad which are currently working perfectly. However during testing I figured out that I somehow lost my iTunes backup encryption password. As such I figured I would just change the backup password, delete the old backups, and create NEW backups for which I do know the password to and all would be good (and ready for a future device failure.)
However it appears that iTunes will not allow you to change or disable the encryption password for NEW backups without first knowing the old encryption password. Does anyone know if a way around this?
Thank you for your time.

Thanks!

Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in?

Air MD792E/A, iPAD WIFI CELL 32G Space Grey
Can't remember password for new ipad air. have never synced it with another computer never had the chance to use icloud. How do i get in? Tried to sync with itunes but iTunes can't sync without a password. I cannot see summary on the side bar. How do I restore so I can restart my iPAD Air since it has relatively no history. I have not had the chance to use it yet. Finished set up to as far as the start menu.
<Personal Information Edited by Host>

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Risk with Locking and changinf password for SAPCPIC

Hi All,
Please advice if there is any risk with locking and changing password for SAP standard user SAPCPIC .We are on system 4.6D .
Somewhere I could find that if there is any RFC destination defined with this user then it may cause problem after locking .I found following entry in RFCDES table .
a I
M=200,U=SAPCPIC,L=E,v=3FB20DF66CA32E419606388B51,
But I could not find any entry in sm59 for this .What is this entry as it is not there in SM59 .
Any other known risks pls tell me .
Thanks,
Chittaranjan

Can password of SAPCPIC user be changed without any problem?
We are on ECC6.
Report RSUSR003 refer to note 29276 and note says that changing password will cause problem with SM51 and some other report as the password is hard-coded there. Though this note seems to be bit old.
Edited by: Pawan Kesari on Jun 9, 2009 7:58 PM

I changed my apple id and my password for it too. but on my ipod and mac book pro my old apple id keeps showing up and i it doesn't except any password. what should i do??

I NEED HELP!!!!!!
i changed my apple id and my password (for the apple id), but on my ipod and mac book pro my old apple id keeps showing up for icloud, and i cant put either password!!! Trust me i tried.. What should i do???? So please help!!!!!!

On your Mac, go to System Preferences>iCloud, sign out, then sign back in with the ID you want to use.
If you're running iOS 7 on your iPod and old ID is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

SAP* and DDIC passwords for new clients in Sol Man 4.0

Similar Messages

Maybe you are looking for