SAP BPC 7.5 SP04 POWN - PCON and POWND

Hi experts,
I begging the development of COI, but all the HTG about the subject is on version 7.0, we are using the 7.5 with the DHE, and the input of percent is on a automatic standard screen in Excel, so with this some query appears:
1 - Where is the POWND ?
2 - What is the difference of POWN and PCON ? Could you give more concepts than we have below ?
A member named POWN that stores the percent of ownership or control if it is applied
A member named POWND that stores the percent of ownership or control calculated with the direct share method
A member named METHOD that stores the consolidation method
A member named PCON that stores the percent of consolidation
3 - What is the difference between the Proportional and the Equity ? Is the proportional for the cases we use subsidiaries ownership below in a parent of the group and the equity is for the cases we use percent of control below the 0,5 and above 0,2 ? I think the direct share we use the global, correct ?
Best Regards
Alexandre Mendoza Collepicolo

1 - Where is the POWND ?
POWND is the account that the system writes to when you execute ownership calculation using the direct method (versus group)
2 - What is the difference of POWN and PCON ? Could you give more concepts than we have below ?
POWN is the actual ownership percentage.  PCON can be left blank provided you do not have split ownership
3 - What is the difference between the Proportional and the Equity ? Is the proportional for the cases we use subsidiaries ownership below in a parent of the group and the equity is for the cases we use percent of control below the 0,5 and above 0,2 ? I think the direct share we use the global, correct ?
Proportional and Equity are 2 different methods of accounting consolidation.  Too detailed to be described here.
All the best
Tara Sitaram

Similar Messages

  • Data (Master Data Changes and Transaction Data) from SAP BW to SAP BPC 5.1

    Hi guys
    I have seen posts on this forum describing data transfers from SAP R/3 to SAP BPC. I assume the procedure for data transfers from SAP BW to SAP BPC 5.1 should be the same i.e. using SSIS packages.
    However I have some unique requirements -
    1. DATA AT DIFFERENT AGGREGATED LEVELS - I need data from SAP BW at different levels - Some data comes at Product level while other at Customer level and some at Project Level. The current procedure takes BW queries output in excel sheets (6 files) and then use the data manager package to load the data in SAP BPC 5.1 using appropriate transformation and conversion files. This procedure is highly manual and I am looking at using SSIS package to do this. However, because of having data at different levels, it becomes a little tricky. How can we achieve this using SSIS?
    2. UPDATING MASTER DATA - I need to update the master data (dimension members) in SAP BPC 5.1 at the start of every month. The current procedure compares (in MS ACCESS) the data from the queries mentioned in 1 to the dimension members in SAP BPC 5.1 and spits a file with the new entries which needs to be manually updated in the appropriate dimensions using Admin Console. I am looking at automating this task. I cannot just replace all the contents of a dimension with the members coming from SAP BW since the dimension members contains some dummy members which are used for planning.
    3. HIERARCHY CHANGES - What is the best way to capture the hierarchy changes in SAP BW into SAP BPC 5.1?
    Please advise.
    Thanks,
    Ameya Kulkarni

    Hi Ameya,
    how did you solve the described problems? Can you give some hints about uploading master data and updating the hierarchy?
    BR, André

  • Can any body provide me Step by Step Instalization of Sap-Bpc ms7.5 version

    Dear Experts,
    Can any body provide me Step by Step Instalization of Sap-Bpc ms7.5 version guide.
    And what are the System requirements.
    Thanks in advance.
    Srinivasan.

    Hi,
    What do you mean by "Instalization"? Did you mean installation?
    Please check the below link from SMP for complete details on Installation of BPC 7.5 MS:
    https://websmp202.sap-ag.de/~sapdownload/011000358700000986502009E/SBOP_PC_75_M_SP05_Install.pdf
    Hope this helps.

  • SAP BPC 7.5 SP6 on Win 7 x64bit & MS Off 2010 - Path not Found errors

    Hi,
    We have currently started a test group of 16 users to test Win 7 before migrate the entire company. Some of the test users are in Accounting and they use SAP BPC 7.5 for their Budget and Forecasting. We have Win 7 x64 bit and MS Office 2010 installed. For one user, after logging into the Production server for BPC he opens the report library and he is unable to get certain macros to allow for different changes within the excel spreadsheet. For example, there is a section that asks him to change the company name. When he clicks on the field to do so it says "Path Not Found".
    Another user when he tries to open up a report, he gets "Loading Dimension information..(Customer)" then a popup comes and says File not found. We have tried to uninstall and reinstall BPC on the new machines to no avail.
    Any help you can provide would be great. If more information is needed, please let me know.
    Thanks,
    Lakiasha Walker
    IT Security Administrator

    Hi Lakiasha,
    Could you re-install .NET 2.0, .Net 3.0. .Net 3.5 framework on the machines and check the results.
    I guess you may need to upgrade your BPC server as well as client version to SP8 ( minimum) to work with MS office 2010.
    Regards,
    Deepak Kori

  • SAP BPC 5.1 "Client Software center" icons missing

    Hi,
    I had installed newly SAP BPC 5.1 (Single server installation) and installed Administration client & Office client on the server. It was successfully installed and all functionality was working fine.
    Now I want to access this server from client machine (desktops). The desktops has Microsoft Office 2007 installed and trying to access SAP BPC using http://<servername>/osoft
    I am able to get the home page, but when I click on icon "Client Software Center", I am not getting any icons for installing Client software (Ex: BPC for Office Installation, BPC client Diagnostics or BPC for Administration Installation)
    Appreciate if someone can help me on this.
    Cheers,
    RAJU

    That address should get you to the default landing page where you can access the software center.  Since this is a single server environment you should obvioulsy be addressing the web server.  I assume when you installed the client components on the server you were logged in as the service account that you installed the software with.  If you are connecting from your desktop using authentication, then you would be connecting with the ID and password that you login to your PC with.
    Have you gone through the BPC Administration security console and added your network ID to the application?  If not, then the system will know you are not a vaild system user and you would not be able to install the software.
    If you feel you have done this, then run the connection wizard and choose the option to connect with an alternate user ID and use the service account and verify you can access the software center.  If you can with the service account but not with your ID then it is a application security issue with how your network account is setup in the system.
    The other thing to check, when you say you cannot get the software center icon, are you getting the landing page and just not seeing it or are you getting a page error accessing the page?  If you are getting a page error and you did not use the default port to connect with then you would need to pass the port number through when you are addressing the server (e.g. http://servername/osoft:8080)

  • NEW AVAIL SAP BPC 10

    Hi experts,
    my company avail the new sap bpc 10, and i will be one who support the system after the project,
    i just would like to know if we also get a pdf training materials for sap bpc 10?
    like 410,420 and 210, i dont remember correctly the number of those training materials in previous version, even so i just would like to know,
    because i think our consultant who's implementing the sap bpc 10 didn't discuss to my project manager.
    Thanks and Best Regards,
    Marlon

    Marlon,
    Its a good start to know in detail with the PDF's 410,420,430 and 440.
    Try downloading from here,
    Daniil Blinov’s Documents on SlideShare
    Good Luck with the start !!

  • SAP BPC MS 7.5 with Extended Analytic Analyzer and EPM connector

    Hi experts,
    I need your inputs regarding Extended Analytic Analyzer add ins.
    I installed the SAP Business Object Extended Analytic Analyzer hoping to integrate the Xcelsius in SAP BPC MS 7.5
    I am following the HTG to integrate but got lost.
    In EPM connector steps, I cannot find the option from OPERATION TYPE: Retrieve data using Analyzer Report.
    The only options available under operation type are
    EPM Report
    Retrieve Environments
    Retrieve Models
    Retrieve Dimensions
    Retrieve Dimension Members
    Input Data
    Retrieve Business Process Flows
    Retrieve Context
    Retrieve Members Property Values
    RetrieveText From Library
    It doesn't include the option Retrieve data using Analyzer Report.
    Im wondering if there are different version of the epm connector? Was my EPM connector differs from the HTG?
    And also in Excel under Extended Analytic Analyzer, the function =GETREPORTDEFINITION() is missing
    Please help me on this guys..
    Thanks in advance.
    yajepe

    It seems a very good oportunity to use FIM.
    FIM was designed especially for exchange data betweeen different SAP product.
    FIM will provide an easy way to do the conversion using wizards and also will assure you about data inetgrity and quality.
    This will be the way forward but more details has to be define during the implementation.
    I hope this will help you.
    Kind Regards
    Sorin Radulescu

  • SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject

    Hallo Forum Participants,
    I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
    These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
    What are the features of BPC InfoObjects in Comparision with regular InfoObject?
    How can I load Hierarchies into InfoObject?
    What else I must take into account?
    Why does not work this simple test?
    Regards.
    Alisher
    Edited by: Alisher Babaev on Jan 6, 2012 1:59 PM

    Hallo pkrishna,
    so it is successed with master data load, but without hierachiies.
    My Master Data Properties on Dimension Sheet are:
    -ID
    -EVDESCRIPTION
    -PARENTH1
    -CURRENCY
    I have mapped as below:
    ID=ID
    CURRENCY=/CPMB/CURR
    /CPMB/CURR- my technical id in BW.
    In the Note you advised transformation file has been mapped like below:
    -NODENAME=NODENAME
    -HIER_NAME=HIER_NAME
    -PARENT=PARENT
    -ORDER=ORDER
    After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
    Have you any Idea?
    regards

  • SAP BPC 7.5 SP3 and Citrix Entering Data through BPC Client and Citrix

    Hello BPC experts,
    my client is using SAP BPC 7.5 SP3 in combination with Citrix. We are having problems now, while entering data through the BPC Client (installed on BPC Server) and the BPC Client (running on Citrix).
    When we enter data through the BPC Client (Server) and expand the sheet, we can only see the data that we entered through the BPC client (Server). When entering data through the BPC Client (Citrix), we can see only the data we enter through the BPC Client (Citrix).
    The database, however, saves both entries correctly. For test purposes we created a test report which shows both entries correctly in the BPC Client on the server and on Citrix.
    Does anyone have an idea what can be wrong with our system? We tried to create an EvDRE log File for this BPC version as well, but failed. Maybe one of you already did that and can help me with this.
    Thanks in advance!

    You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) of BPC which you are using.
    Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
    Thanks and best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Applications Regional Implementation Group (RIG)

  • Differences between SEM BCS and SAP BPC

    Hello All,
    Can you please let me know the differences between SEM BCS and SAP BPC. What I know is SEM BCS is an SAP product for Financial Consolidation (Legal and Management). SAP BPC is the new product taken over from Outlooksoft. It also features the consolidationa and planning functionalities. Can you please suggest which is a better product.
    Regards
    Vikram

    There is nothing like better or worse product.
    BCS has some strong features like consolidation monitor, investment consolidation and for most consolidation functions, configuration is very easy. In BPC, you may have to write scripts.
    BCS has BW as the backbone  where for BPC 5.1 there is none. Howveer, in  BPC 7.0, the BPC will rest on BI and things will be much better.
    Ravi Thothadri

  • Differeance between SAP BPC 5.1 and SAP BPC 7.0 NW  Version

    Dear experts,
    Please contribute your expertise and valuable answers to this question.
    what is the script language we need to use in SAP BPC 7.0 NW version? SQL or ABAP..?
    What are the new features and positions are added in SAP BPC 7.0 NW comparing to BPC 5.1 and BPC 7.0 MS version.
    Thanks a lot in Advance.
    Satish

    Hi Kumar
    I have tried to answer three of your questions. Hope this will help
    Ques. Do we have BPF (Business Process Flow) in BPC 7.0 NW version?
    Reply: No
    You can refer to the thread: BPC 7.0 - how to design business process flow type Planning process?
    Ques. If no, How can we do Approval process in 7.0 NW version ?
    Reply: Approval process works with changes in the work status settings while data planning moves over the controlling Approval hierarchy. So in the schedule you can have a display of the current work status using EVLCK()
    Ques: Can we do Approval Process with Custom menus ?
    Reply: You can refer to the thread: BPC 7.0 - how to design business process flow type Planning process?
    "There is also a lot of explanation on using EVMNU on the SAP Service Marketplace in the Documentation Addendum to BPC 7.0 SP02 NW Central Note 1306898."
    Have a nice day.
    Cheers!
    Abhishek

  • SAP BPC 7.5 and Citrix

    Hi,
    Running SAP BPC 7.5 client from Citrix XenApp 5.0 W2K8 32bit server.
    The problem is the when running "SAP BusinessObjects Application set" and trying to "refresh workbook" the "Grid Layout" is empty.
    I´v tryed to folow the guide in "SAP Note 1277548 - Cache folder is overwritten on Citrix"
    But i´m not able to change the eTools > Client options > et local folder for P&C to "empty" but it is not posible to leave empty.
    When running the app. from the server with localadmin it is working fine.
    Best regards
    Søren

    You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) of BPC which you are using.
    Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
    Thanks and best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Customer Solutions Adoption (CSA) team

  • How to design and develop Cost center with SAP BPC 5.1 ?

    Hi all,
    Can any one tell me how to design and develop cost center planning (what are the steps to follow) using SAP BPC 5.1?
    Thanks,
    Sandy

    Hi Sandeep,
    1:We need to look at whether cost center planning is tied to a profit center level and/or to a company code level
    2:We could have dimensions like Account(which in this case would reflect cost element),category,entity,time with additional dimension s like profit center(cost centers can have a direct mapping to profit center,usage of properties would help in here),WBS ,projects,investment position id's etc.
    3:We could look at different applications like HR(pay roll related expenses),admin,capex(to bring in depreciation values) etc to bring in data to pull in data to different cost centers either directly or via script logic(usage of destination_app)
    4:For those values not tied up to profit centers ,we would look at allocating/distributing the expenses to different cost elements
    5:We need to decide whether we do the planning on a monthly/periodic vs yearly level where in we would look at actual values and incrementing at a certain % to fill in as the base for our planning(using category=actual/plan plus timeperiods).We could look at Top down vs botton up approach as well to segregate the planned costs
    6:Consideration should be made at security level to identify/restrict different users who needs to access specific cost centers
    Yes,this is just a small jist of structure,there are 100's of other considerations which would come into picture from a business requirement level.
    regards
    shyam

  • NO Version Management in SAP BPC-is it in SAP BPC7.0 NW AND/OR SAP BPC70 MS

    All,
       As far as I know SAP BPC doest not have versions management. How you guys out there handle version management for SAP BPC. Do we have VM on SAP BPC 7.0 NW?
    Why  there is no VM in BPC.  Come on convince me : - )
    Thanks,
    SK

    Guys,
    What is the verdict on Version Management being there in BPC? Can you (Saquib or others) give an example as to what Version Management functionality you might be looking for?
    From the little I know, when you are doing software development through lifecycle (in SAP it would be called Transport strategy) management, you promote different changes in the target system and hence SAP has an implicit version management. I am assuming that BPC 7.0 NW version would have that automatically since it is promoted through transport strategy only. Are you referring to the same thing as version management or is it something else? But I also read somewhere that only appset is promoted through transport and not sure if each and every component is part of that.
    Please enlighten with your insighs.
    Thanks.

  • SAP BPC and Hyperion SmartView

    Hello, Forum u2013
    Encountering an issue when trying to use SAP BPC and Hyperion SmartView at the same time and just curious if anyone else is 1) using both programs at the same time and 2) if so, have you encountered any problems?
    Here is the scenario:
    I have a SAP template file (EvDRE) that is used in conjunction with Hyperion SmartView.  The way it works is that the template would extract the numbers out of Hyperion and then send the base numbers to the SAP system.
    In order to do this, however, I have to create the connection to the Hyperion database first, which I do using VBA code.
    When I execute this code within a blank workbook, I am able to successfully create the connection to Hyperion with no problems.
    When I execute the same code within my SAP template, I receive a MS Excel error (u201CExcel has encountered an error and must close programu2026u201D).  This has been a consistent result that Iu2019ve received.
    Please note that I am not logged into either SAP or Hyperion when I receive this error (this happens outside both systems).  I'm worried that as soon as I log into both programs, the whole thing will crash...
    So, just curious if anyone out there is encountering the same issue when trying to use both programs.
    Please let me know.
    Carlo

    My suggestion is to attempt to break it into 2 seperate work flows for testing, using 2 seperate templates.  One to pull, then copy the data to the second sheet for submission.  I would assume that you would have to be connected to initiat eeither the extraction of sending of data using your added code, so seperating the 2 steps may prove useful.
    Hope this helps.

Maybe you are looking for