SAP DMS - SAP ECC network traffic

Hi all,
I have the following situation:
The SAP ECC servers are hosted outside my company and we are planning to install a SAP DMS server.
We have 2 options: host the SAP DMS outside or install SAP DMS in our datacenter.
When the SAP user attaches or reads a file to/from SAP DMS, how is the network traffic ?
Is there any traffic fom SAP ECC to SAP DMS or the file goes to/from DMS from/to end-user ?
How SAP DMS impacts my WAN ?
Best Regards,
Leonardo.

Leonardo, I have done some research / trouble shooting and architectural changes to raise the upload / download speeds, there are several dependencies like Network, Application, hardware etc but to your question:
First of all, DMS is a core functionality of ECC and utilizes both ECC for execution and Content Servers (recommended for Obvious performance reasons) for Data Storage. For your case I recommend that you host Content Server at the Data Center (assuming you have no other option) and have a Cache Server installed Onsite. (This requires minimal maintenance). When the user uploads a file the traffic is high as the entire File needs to be transferred to the data center, on the other hand Cache server (if installed onsite) considerably reduces the retrieval time.
Again having said above there are several other parameters that could affect your upload / download speeds.
Hope you'll find this useful, let me know if you have further questions.
regards
C

Similar Messages

How to configure SAP ECC DMS content repository with CRM Services Object

hi,
we have SAP Document management system which is currently integrated with SAP R/3 Ecc system .
with ref. to sap standard functionality i am able to upload the document in DMS content repository through SAP R/3 Ecc System as below.
step-1 ,T.code:CV01n
a.     create - DMS Documents
b.     Oupload Scanned documents in DMS system
c.     select content repository
d.     Save Document
now, in same manner i want to store business documents in SAP ECC R/3 DMS content repository using CRM services trnsaction"CRMD_ORDER". kindly guide me suitably.
regards,
sunil

i am explaining your proble
a.    create - DMS Documents
b.     Oupload Scanned documents in DMS system
c.     select content repository
d.     Save Document
after saving open to document in cv02n and track status of doc i.e. AR CR & RE
if RE status is there the it will repositor at server
Regards,
Sanjeev

How to trigger crystal report from SAP ECC

Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.

Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don

Error while registering SAP ECC system in UWL systems

hi,
Error while registering SAP ECC system in UWL systems.
Errors:
System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=132.147.0.112 SYSNR=00 GWHOST=132.147.0.112 GWSERV=sapgw00 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner '132.147.0.112:sapgw00' not reached
TIME        Thu Nov 27 16:12:05 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER     2
Item type retrieval and registration requires a connection to the systems and may take a couple of minutes
For each system, they are generated as the configuration named 'uwl.webflow.<system_alias>' or 'uwl.alert.<system_alias>'.
After configuration changes in the backend system, you must re-register the system.
regards.
Srinivas.

Hi,
you can check few things prior proceeding:
Does your connector test after adding your backend system in portal works fine?
Did you define a system alias?
Make sure your SSO is working,
Also check your Jco detination webdynpro tab.
Regards,
Vamshi.

Dispacher not getting Started...SAP ECC 6.0 on Win2K3 and Oracle.

HI Experts,
I have installed SAP ECC 6.0 (OS-Win2003sp2 DB-Oracle10g). Installation was successful, I have also logged in and created a user in SU01. But when I restart the system I am not able to up the sapserver. SAP MMC - dispacher is not starting. I have started OracleListener in service.sap and restarted the system. Un-installed and again installedj2sdk1.4.2_12 and restarted the system...No use, still dispatcher is not getting up....Pls find below paster Developer Trace for Dispatcher....
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        PRD
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    111
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2200
Wed Oct 28 09:26:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ****
***LOG Q00=> DpSapEnvInit, DPStart (00 2200) [dpxxdisp.c   1239]
*     shared lib "dw_xml.dll" version 111 successfully loaded*
*     shared lib "dw_xtc.dll" version 111 successfully loaded*
*     shared lib "dw_stl.dll" version 111 successfully loaded*
*     shared lib "dw_gui.dll" version 111 successfully loaded*
*     shared lib "dw_mdm.dll" version 111 successfully loaded*
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Oct 28 09:26:32 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds*
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sap_PRD_00                              <
DpShMCreate: sizeof(wp_adm)          18672     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2404
argv[0] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1048
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=PRD
argv[7] = -DSAPMYNAME=sap_PRD_00
argv[8] = -DSAPPROFILE=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
Wed Oct 28 09:26:33 2009
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >sap_PRD_00                              <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Oct 28 09:26:34 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Wed Oct 28 09:26:51 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444*
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1063) [nixxi.cpp    4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2404)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]*
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Wed Oct 28 09:27:13 2009
ERROR => W0 (pid 2412) died [dpxxdisp.c   14441]*
ERROR => W1 (pid 2420) died [dpxxdisp.c   14441]*
ERROR => W2 (pid 2428) died [dpxxdisp.c   14441]*
ERROR => W3 (pid 2436) died [dpxxdisp.c   14441]*
ERROR => W4 (pid 2444) died [dpxxdisp.c   14441]*
ERROR => W5 (pid 2452) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2460) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2468) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2476) died [dpxxdisp.c   14441]*
ERROR => W9 (pid 2484) died [dpxxdisp.c   14441]*
ERROR => W10 (pid 2492) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2500) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2508) died [dpxxdisp.c   14441]*
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes*
DISPATCHER EMERGENCY SHUTDOWN ****
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1577
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 28 09:27:23 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Oct 28 03:57:23 2009
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     2412 Ended         no      1   0        0
1 DIA     2420 Ended         no      1   0        0
2 DIA     2428 Ended         no      1   0        0
3 DIA     2436 Ended         no      1   0        0
4 DIA     2444 Ended         no      1   0        0
5 DIA     2452 Ended         no      1   0        0
6 UPD     2460 Ended         no      1   0        0
7 ENQ     2468 Ended         no      1   0        0
8 BTC     2476 Ended         no      1   0        0
9 BTC     2484 Ended         no      1   0        0
10 BTC     2492 Ended         no      1   0        0
11 SPO     2500 Ended         no      1   0        0
12 UP2     2508 Ended         no      1   0        0
Dispatcher Queue Statistics               Wed Oct 28 03:57:23 2009
===========================
--------++++--+
| Typ |    now |   high |    max | writes | reads |
--------++++--+
| NOWP |      0 |      2 |   2000 |      6 |      6 |
--------++++--+
| DIA |      5 |      5 |   2000 |      5 |      0 |
--------++++--+
| UPD |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
| BTC |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
| SPO |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
--------++++--+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     7 ( 87%), shm     1 ( 12%)
since last update     total     8, udp     7 ( 87%), shm     1 ( 12%)

Hi,
Could you please also paste dev_w0 logs ?
Thanks
Sunny

Disaster Recovery For SAP ECC 6.0 On Oracle

Hi All,
This is our infrastructure
Windows 2003 Server
SAP ECC 6.0
Oracle 10
Legato Networker Client / Library
Actually our Backup Strategy is to do an Online Backup Every Night from monday to saturday. We want to test our backup by doing a Restore. We are assuming a complete loss of the system including hardware.
What we do:
1. Install the SAP System on a new host with the same hardware characteristic of the source system.
2. Install & Configure the legato utility.
3. Copy the E:\oracle\MIS\sapbackup\ directory from the source system to the test system.
4. Them we put the database in mount mode.
5. Execute the command: brrestore -b bdyxwoqv.fnf -m full (bdyxwoqv.fnf-> Full Online Backup that was executed without problems).
It gives the following errors:
BR0386E File 'F:\ORACLE\MIS\SAPDATA2\SR3_10\SR3.DATA10' reported as not found by
backup utility
BR0386E File 'F:\ORACLE\MIS\SAPDATA3\SR3700_9\SR3700.DATA9' reported as not foun
d by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0279E Return code from 'backint -u MIS -f restore -i E:\oracle\MIS\sapbackup\.
rdyybrzp.lst -t file -p E:\oracle\MIS\102\database\initMIS.utl': 2
BR0374E 0 of 63 files restored by backup utility
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0231E Backup utility call failed
BR0406I End of file restore: rdyybrzp.rsb 2008-10-01 17.45.19
BR0280I BRRESTORE time stamp: 2008-10-01 17.45.19
BR0404I BRRESTORE terminated with errors
Since this is a new SAP system it never will find the SAPDATA files because they where on the source system and this is a new test system.
We found the following note:
96848 Disaster recovery for SAP R/3 on Oracle
But this note is for SAP R/3 no for SAP ECC!
It explain that you have to install your SAP system with the System Copy Method (is this the only way??).
2.) Installation of the R/3 System
The installation of SAP software contains the software installation of the database. The initial SAP database should be created again but the SAP data should not be loaded.
Install the SAP system with the Oracle-specific system copy method, which is based on backup/restore. This method is described in the system copy guide for your Product/Release. Refer to Note 659509 for products that are based on Web AS.
3.) Modification of the installation
Above all, you must take into account the mounted file systems at the time of the loss. If necessary create new SAPDATA directories (mount points). These generally identify a disk or a logical storage area (logical volume).
Are we working in the right way? maybe there is a formal procedure to do a Restore from an Online backup when you complete loss your system.
Please some tips.
Best Regards,
Erick Ilarraza

Hi Eric,
Thanks a lot for your reply, I will follow the Note 96848 Disaster recovery for SAP R/3 on ORACLE point 5.
5.) Restore profile and log files, as you sayed in case of disaster we will lost our "source" system.
On the other hand to configure the legato client we take care of the name of the server, we configured the .sap, .cfg and .utl files so in theory the restore will be done on the new test system since we run the brrestore command from that system.
Officially there is not a documentation from SAP to do a Restore from a Online Backup with SAP ECC, SAP Netweaver (ABAP / ABAP + Java). You only have the 96848 note??? I found the following information:
http://help.sap.com/saphelp_nw70/helpdata/en/65/cade3bd0c8545ee10000000a114084/frameset.htm
But there is not a official procedure like a System Copy Guide or Installation Guide.
Best Regards,
Erick Ilarraza

SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E

Dear Sir.,
Am installing sap ECC 6.0 on windows 2008 clustering with db2.
I got one error in the phase of Configure the database for mscs. The error is DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
DB2_INSTANCE=DB2PRD
DB2_LOGON_USERNAME=iil\db2prd
DB2_LOGON_PASSWORD=XXXX
CLUSTER_NAME=mscs
GROUP_NAME=DB2 PRD Group
DB2_NODE=0
IP_NAME = DB2 IP PRD
IP_ADDRESS=192.168.16.27
IP_SUBNET=255.255.0.0
IP_NETWORK=public
NETNAME_NAME=DB2 NetName PRD
NETNAME_VALUE=dbgrp
NETNAME_DEPENDENCY=DB2 IP PRD
DISK_NAME=Disk M::
TARGET_DRVMAP_DISK=Disk M
Best regards.,
please help me since am already running late with this installation to run the db2mscs utility to Create resource.
Best regards.,
Manjunath G
Edited by: Manjug77 on Oct 29, 2009 2:45 PM

Hello Manjunath.
This looks like a configuration problem.
Please check if IP_NETWORK is set to the name of your network adapter and
if your IP_ADDRESS and IP_SUBNET are set to the correct values.
Note:
- IP_ADDRESS is a new IP address that is not used by any machine in the network.
- IP_NETWORK is optional
If you still get the same error debug your db2mscs.exe-call:
See the answer from Adam Wilson:
Can you run the following and check the output:
db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
I suspect you may see the following error in the debug.txt:
Create_IP_Resource fnc_errcode 5045
If you see the fnc_errcode 5045
In that case, error 5045 which is a windows error, means
ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
couldn't find the "public network" as indicated by IP_NETWORK.
Windows couldn't find the MSCS network called "public network". The
IP_NETWORK parameter must be set to an MSCS Network., so running the
Cluster Admin GUI and expanding the Cluster Configuration->Network to
view all MSCS networks that were available and if "public network" was
one of them.
However, the parameter IP_NETWORK is optional and you could be commented
out. In that case the first MSCS network detected by the system was used.
Best regards,
Hinnerk Gildhoff

IDoc via RFC problem between certified app and SAP ECC 5.0 on AS/400

Greetings.
I'm not sure this is the best forum for this question but here it goes:
Ever since 2000, we have our certified application for HR-PDC interface. We never had any problem that would be hard to resolve.
Recently, we had a customer who installed our app to exchange data with SAP ECC 5.0 on an AS/400 machine (first time interfacing with this platform for us).
We already checked all user permissions and every SAP note that mentioned this problem but it still doesn't work: when receiving and IDoc (just any), we get the error IDOCTYPE_READ_COMPLETE:OBJECT_UNKNOWN.
Permissions for user are SAP_ALL and SAP_NEW and the IDocs used are the ones stated in the HR-PDC interface (for example, HRCC1DNPERSON, for instance).
I traced down the problem by examining the .trc files (RFC trace files) and I found where the problem lies: IDOCTYPE_READ_COMPLETE is being passed the IDoc Basic Type HRCC1DNPERSON and it should be HRCC1DNPERSON01. I did the same tracing for another installation (not AS/400 with SAP 4.6) and everything goes fine: IDOCTYPE_READ_COMPLETE is called with correct HRCC1DNPERSON01.
I'm wondering if this could be a problem in SAP 5.0 for AS/400 as we already have other customers running the same version on different platforms and everything just goes fine.
Any clues, anyone?
Thanks and regards,
André Baptista

hi
we have a similary problem with our certified as400 application. Our client has the version 4.6C service pack 51 and patch 2161. Data transfert by RFC is ok but we have problems since the installation of the patch 2252. The RFC function RFCaccept do not run any more : the log
<i>argc    = 2
argv[0] = 'HLSAP45A/HLKA15C'
argv[1] = '-DCP03'
Fri Nov 24 14:21:53 2006   *
<== RfcAccept                           rfc_handle = RFC_HANDLE_NULL
<== RfcLastError
RFC operation/code: RfcAccept
ERROR/EXCEPTION
key     : RFC_IO5
status : CODE=CM_PRODUCT_SPECIFIC_ERROR STATUS=??? DATA=??? ID=???
message : LOCATION    CPIC (TCP/IP) on local host
ERROR       connection to partner broken
TIME        Fri Nov 24 14:21:53 2006
RELEASE     45A
COMPONENT   NI (network interface)
VERSION     31
RC          -6
MODULE      nio4i.c
LINE        891
DETAIL      NiPRea
internal: IO HANDLE=1 DRV=??? LINE=1369 CODE=5
<== RfcClose </i>
Do you have solve your problem ?
thanks

No receiver could be determined while doing SAP ECC Integraion with MDM 7

Dear All,
Can you please help me to resolve the following issue.
We are doing SAP ECC Integration with MDM 7.1 by using MDM PI Adapter.
Source side we are processing MATMAS.MATMAS05 IDoc and Receiver side we are using MDM PI Adapter to Connect the MDM System.
I have checked the Configuration by using Test Configuration Wizard, it showing every thing fine there.
Is it because of any network connection issue at the Target system (MDM) side?
Plz check the error message for your reference;
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Mahesh

Hi,
From error looks like it is not failing at receiver determination step. if you all configurations are fine, then this could be because of system cache refresh.
Go to Edit mode in your scenario and again save it and activate it. Do a cache refresh and check if it works.
Regards,
Shiv

Layout 2.00 com mensageria "Z" - Aplicação de Notas no SAP ECC

Olá pessoal,
Estou participando de um projeto para implementar a versão 2.0 do XML em um cliente que não tem a mensageria startard (GRC).
Já levantei as notas necessárias no SAP ECC (estão num total de 42).
A mensageria Z, muito semelhante do Acelerador/GRC pois também foi desenvolvida em uma instância SAP com o PI como integrador, deve trabalhar da mesma forma que o GRC no sentido de permitir o envio das duas versões (1.10 e 2.00) em paralelo através da configuração de Business Place no SAP ECC.
Minha dúvida é a seguinte:
Há algum impacto para as execuções na versão 1.10 se aplicarmos as Notas OSS no SAP ECC num primeiro momento e depois começarmos as adequações na mensageria?
Desde já agradeço,
Daniela

Olá Daniela,
Aplicando as SAP notes, a estrutura do FM J_1B_NFE_XML_OUT (que é utilizado outras mensagerias - não SAP) é alterado com a inclusão de novos parâmetros de importação, porém estes são opcionais o que não irá impactar a solução de mensageria não standard.
Lembre-se também de não alterar a versão do XML (IMG: Cross-Application Components, choose General Application Functions --> Nota Fiscal --> CNPJ Business Places --> Define Business Places).
E caso as SAP notes relacionadas aos motivos de contingência estejam sendo aplicadas agora, será necessário que o funcional realize as configurações necessárias (motivos de contingência) conforme descrito na Note 1451966 - NF-e: contingency date, time and reason .
At.
David

SAP (ECC 6.0) - Erro de rejeição (Engrenagem)

Boa tarde a todos,
Gostaria de compartilhar um cenário de erro ocorrido no ambiente de produção do cliente (pós-GoLive) onde implementamos recentemente Nota Fiscal Eletrônica.
Para um determinado cenário enviado para SEFAZ/SP foi retornado o código de erro 210 (Rejection: Invalid Receiver's IE), esta mensagem foi devidamente atualizada no GRC e no SAP (ECC).
O problema ocorreu justamente quando o usuário optou em ajustar o código de inscrição estadual do respectivo cliente deste cenário e logo após, selecionou o documento "rejeitado" através do monitor do SAP (J1BNFE) e executou a função "Enviar de Novo", a partir deste procedimento (incorreto), o monitor retornou uma sinalização de erro (bandeira vermelha) com a seguinte mensagem: "Enviada ao sistema de envios de mensagens (XI,....), sinalizou o campo status ação com uma "engrenagem", o campo SCS com o valor 0 "zero" e o campo Status Sist. Msgs. com o valor "G" (MS recebido; outro erro).
Conclusão, este processo encontra-se travado no ambiente de produção do cliente, impossibilitando qualquer ação de inutilização ou cancelamento.
Estamos cientes que o procedimento correto deveria ser: solicitar a inutilização deste documento e não enviá-lo novamente a SEFAZ/SP, após concluída a correção da inscrição estadual do respectivo cliente, no entanto, gostaríamos de obter alguma dica ou orientação de como proceder corretamente neste caso afim de corrigir este problema.
Desde já agradeço pela ajuda e gostaria também de parabenizar pelo espaço onde pude verificar que há muita informação útil para todos.
Att,
André Teixeira

Oi Henrique,
Sim, o MSSTAT estava preenchido com "A" antes da tentativa de reenvio. Como a nota já havia sido rejeita pela SEFAZ/SP no nosso entendimento o usuário deveria:
1) Requisitar a "inutilização" desta NF-e;
2) Ajustar a IE no cadastro de cliente;
3) Executar novo faturamento para este cenário que automaticamente iria gerar uma nova NF-e para nova aprovação na SEFAZ/SP, seria este o procedimento?
Ao executar Send no menu NF-e apresenta-se a seguinte mensagem:
Novo status de comunicação de sistema "Enviada a sistema de envio de mensagens (XI,...)" não permitido p/SCS "Enviada a sistema de envio de mensagens (XI,...)" anterior
Nº mensagem J1B_NFE007
Vou conversar com usuário sobre a possibilidade de introduzir o status de erro manualmente (SE37).
Grato,
André Teixeira

SAP ECC error:'Migration Monitor' exits with error code 103.

Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha das

Hello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish.

RFC connection from SAP Data services to SAP ECC

We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

I am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time.

Sap Ecc 6.0 Installation error in Import Java dump e

Hi Friends,
I got error in Phase 20 of 45:-
ERROR 2015-08-06 17:01:26
CJS-30049 Execution of JLoad tool 'E:\j2sdk1.4.2_12\bin\java.exe -classpath "E:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/lib/iaik_jce.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jload.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/antlr.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jddi.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/offlineconfiguration.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/opensqlsta.jar;E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar;H:\usr\sap\ECC\SYS\exe\uc\NTI386\ojdbc14.jar" -sec ECC,jdbc/pool/ECC,
ecc6/sapmnt/ECC/SYS/global/security/data/SecStore.properties,
ecc6/sapmnt/ECC/SYS/global/security/data/SecStore.key -dataDir E:/sap_kol/javacomponent\JAVA_EXPORT\JDMP -job "E:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'E:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jload.java.log' for more information.
ERROR 2015-08-06 17:01:26
FCO-00011 The step importJavaDump with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
INFO 2015-08-06 17:16:48
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump".
Kindly help me!!
Anuska

Hi Markus, Debashis , Uday and Friends,
I am currently Watching Thread.
Plz Help Me.
Regards,
Anuska

SAP Personas using SSO to connect SAP ECC

Hi,
We configured SAP Screen Personas test landscape.
When I launch the mainapp page, the system is prompting for user credentials.
Then I get "System Selection" screen where the system I have configured (SAP ECC).
When I click on system backend, an new popup ask for user and password (SAP ECC credentials).
We are trying to understand if it is possible configure SSO to access ECC backend.
So, the ECC backend credentials will not be required anymore.
I am not sure if it is possible this configuration.
According SAP note 1684886 - License conditions of SNC Client Encryption, I think this scenario requires additional license.
Any help to resolve this is highly appreciated.
Best Regards,
Leonardo.

The project requirement is avoid the user can log in with SAPGUI and run the standard transaction.
So, the user can log in only with SAP personas user/password and run the transaction on backend with a modified screen with the restrictions of authorization roles.
Regards,

SAP DMS - SAP ECC network traffic

Similar Messages

Maybe you are looking for