SAP exit 0DAT is not filled
SAP Exit variable 0DAT for Calendar Day does not fill upon execution in BEx. Anyone experienced this problem before or suggestions to correct it?
Thanks for any inputs,
Petter
If anyone else find this post by search: "solution" described in thread related to this problem:
Re-appearing variable
Similar Messages
-
SAP EXIT Processing Type not comin in the drop down
Hi,
The SAP Exit Processing type is not appearing in the drop down of the Variable processing types in the Variable wizard while defining the Variable.
Regards,
ViratHi Virat,
SAP Exit processing type is meant for Business Content variables only ( which are provided by SAP), if you want to create a variable & use exit in that, choose Customer Exit option.
hope it helps
regards
VC -
hi gurus
how can i read a sapexit for a standard variable created by sap. i need to replicate that same code and modify it and make my own user exit for a custom variable.
thanksHi Adnan,
SAP exit variables will be filled with function modules and their name starts with RSVAREXIT. So u can go to SE37, and use RSVAREXIT* and press F4 to get input help. Select one of your interest to see the code.
Regards, Uday
Assign points for helpful answers and get one point for yourself. -
Current Workday SAP EXIT variable not aligned with correct work days
Hello,
I am trying to use the Current Workday variable within a report so that the data will only be refreshed when the calendar day is Monday - Friday. Users look at this report every day, but when they get the report on Monday we would like for the date to be restricted to the previous Friday, and then switch back to Monday's date when they view the report on Tuesday. In order to do this we have placed the Current Workday variable from the Calendar Date characteristic with an offset of negative 1, but it is showing Sunday's date when they look at the report on Monday.
My questions are:
-Does this variable use the factory calendar that can define the work days?
-If so, which Factory calendar does it use? I have gone to the Tcode SCAL but I can see there are many different factory calendars and I have no idea which calendar this variable pertains to. I have also transferred the global settings for the factory calendar from the source system, and I see no change within the variable.
-How can I see the program name behind this SAP Exit variable? My thinking is that I could at least look at the code to see if perhaps I can find out the factory calendar ID the variable refers to from there.
Any help on this would be greatly appreciated! Until this is fixed I have to manually adjust this report every Monday and Tuesday morning!! Not ideal.Hi Kelly,
I am not sure whether this can be done by an SAP Exit variable.
But you may try this using a Customer exit variable by using the Function module DATE_COMPUTE_DAY.
The function module "DATE_COMPUTE_DAY" will return the day by 1 to 7 when you input date.
Monday : System will return value = 1
Tuesday : System will return value = 2
Wednesday : System will return value = 3
Thursday : System will return value = 4
Friday : System will return value = 5
Saturday : System will return value = 6
Sunday : System will return value = 7
So input sy-datum to this FM and find the number of day. If it is Monday, the number will be 1.
If output is 1, then offset date by -3 to that of Friday, else offset by -1 to previous day.
Hope this helps,
Regards,
Hari -
SAP EXIT Variable 0FYEAR is not working for Fiscal Year(OFISCYEAR)
Dear SDN,
I have created Simple Query.
ROWS
Company code(0COMP_CODE)
Fiscal Year(0FISCYEAR)
Columns
Total Debit postings(0DEBIT)
Total Credit posting(0CREDIT)
Filters
Companycode(Variable Selection option)
Fiscal year(Varialbe SAPEXIT 0FYEAR)
Fiscal Year Variant(K4)
After executing the query in the variable screen only company code is displayed.
SAP EXIT FISCAL YEAR VARIALBE(0FYEAR) IS NOT WORKING.....
Is there any setting or activation is required to use SAP EXITS?
Waiting for Solution......
Thanks & Regards,
Praveen.KHi
In this case you will have to use a Customer Exit (which is Ready for Input) Variable which gets Current Fiscal Year as a Default Value.
In order to do that - you will need to create a Customer Exit Variable which is Ready for Input. The Variable will have to be assigned with Current Fiscal Year under I_STEP 1 (this refers to the coding of the Customer Exit in T-code: CMOD)
If you need any help with the coding - don't hesitate to ask.
Yaniv -
U201CDisplay not allowedu201D for SAP Exit variables
Hi All
I collected some SAP Exit variables under a transport request and moved them to the BI DEV system from sand box systemu2026u2026u2026 when we are trying to use these objects in BIDEV in the query designer the variables are displaying as u201CDISPLAY NOT ALLOWEDu201D for all queries where ever these variables are used and we are not able to use them for drag and drop in the query designer
I searched forum and find one similar thread but no answer
Please help on this
Thanks in advanceSame here. Do you know how you resolved this issue?
-
SAP-Exit option not available in Query Designer
Hi,
I'm trying to create a variable in BEx Query Designer that is processed by a SAP-Exit . But I don't have the option "SAP-Exit" in the drop down menu for processing type (from SAP-Help: In the variables editor, choose the processing type SAP Exit from the General tab page.).
Am I missing any rights? Any ideas where the problem might be or is this just not possible at all and I have to use a customer exit?
Regards,
AlexanderHi, I think I didn't explain my problem right:
I'm trying to use a variable in BEx Query Designer created by SAP that will be processed by a SAP-Exit. How can I add a SAP variable in BEx? I thought I have to create an own variable and assign "SAP-Exit" as processing type . But obviously this is wrong as I don't have the option for processing type "SAP-Exit". Any ideas?
Thanks,
Alex -
Removing or Suppressing 0DAT SAP Exit from BEx Query
Hi,
I have a BEx Query on a MultiProvider. The Multiprovider is based on two Cubes. Iam facing a problem with the 0DAT Characteristic Variable on 0CALDAY. Although I dont use the 0CALDAY in my query, this SAP Exit Variable pops-up when I run the query. How do I remove or atleast suppress it from popping-up?
I tried the 'Save & Reuse Varibale Values' options from the Query Properties Dialog Box. Although this works but I want to use one more Customer Exit Characteristic Variable on 0CALDAY & this variable is also getting resued because of the setting I made for 0DAT. I want this variable to pop-up and the 0DAT variable to be removed completely(or atleast suppressed).
Would also like to know why 0DAT Variable is popping-up even when I dont use 0CALDAY at all....
Thanks in advance,
-RaviHi,
Please refer to your following mail..I have the same problem with 0dat. Could you provide me any solution for this..
Thanks & Regards,
Karthi
> Hi,
>
> I have a BEx Query on a MultiProvider. The
> Multiprovider is based on two Cubes. Iam facing a
> problem with the 0DAT Characteristic Variable on
> 0CALDAY. Although I dont use the 0CALDAY in my query,
> this SAP Exit Variable pops-up when I run the query.
> How do I remove or atleast suppress it from
> popping-up?
>
> I tried the 'Save & Reuse Varibale Values' options
> from the Query Properties Dialog Box. Although this
> works but I want to use one more Customer Exit
> Characteristic Variable on 0CALDAY & this variable is
> also getting resued because of the setting I made for
> 0DAT. I want this variable to pop-up and the 0DAT
> variable to be removed completely(or atleast
> suppressed).
>
> Would also like to know why 0DAT Variable is
> popping-up even when I dont use 0CALDAY at all....
>
> Thanks in advance,
> -Ravi -
Using SAP Exit Variable twice on the same report
Hello all,
I need to use the same variable -Current Calendar Day (SAP Exit)- to filter against 2 characteristics on the same report.
Unfortunately it's not possible, here the error:
" Variable 0DAT is used in both (structure) element 11T4741S4XTWZUAJ9IQ6DUDE1, and element AZLK9YCS4XGJ940MRPMLXMDS9 for various characteristics (ZCBBIDATE, ZCBPHTDT). This is not permitted as the characteristic is required for the F4 value help structure."
May you please suggest me a way to do it ? Thanks in advance.Hi
As the 0DAT varaible check the other standard varaible which provides the same function in business content.
Or create a varaible with Customer exit and use it.
In CMOD write the code in like this
WHEN 'ZDAT'
L_ZDAT = Sy-datum.
L_S_RANGE-low = L_ZDAT.
and follow the other codes as you define for other varaibles.
REgards
M.A -
ABAP Code for SAP exit varaibles?
Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.Hi Kumar,
Try this below mentioned example where default date is current date.
Step1: Create a variable(ex: cur_date) on requrired characteristic with Processing type "Customer Eixt" and check the check box for ready for input(if this variable need in selection screen).
Step 2: Goto T Code : CMOD and provide appropriate Project and choose components and click on display.
Step3: Double click on exit "EXIT_SAPLRRS0_001" you can see include "ZXRSRU01", double click on include.
Step4: Sample code to populate.
WHEN 'CUR_DATE'.
Data : l_p_range_SSS TYPE rrrangesid.
IF I_STEP = 1.
l_p_range_SSS-Low = sy-datum.
l_p_range_SSS-Sign = 'I'.
l_p_range_SSS-Opt = 'EQ'.
APPEND l_p_range_SSS TO e_t_range.
Endif.
The following values are valid for I_STEP:
· I_STEP = 1
Call up takes place directly before variable entry
· I_STEP = 2
Call up takes place directly after variable entry. This step is only started up when the same variable could not be filled at I_STEP=1.
· I_STEP = 3
In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again.
· I_STEP = 0
The enhancement is not called from the variable screen. The call up can come from the authorization check or from the Monitor.
Also, refer this link..
http://help.sap.com/saphelp_bw320/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm
Cheers,
Allen -
How to see the ABAP Code behind SAP Exit Variables.
Hi Everyone.
I was wondering if anyone could help me with the steps to see the ABAP Code behind a SAP Exit Variable.
Sometime back I remember of going to Transaction SE37 - Function Module and give the Variable name,
Eg: 0F_ADAY, Hit F4 or something like that and was able to see the ABAP Code/Function Module/Exit written for that Variable.same
But today I tried to do the same thing to see the code for Variable 0P_FVAEX but I was NOT able to see it.
I think I am missing something.
Can someone help me recollect what I am missing.
Thank You for your time
NOVICEHi bi novice,
big sorry for the late reply!
The following variables are defined in function module RREX_VARIABLE_EXIT as case statement:
'0CMONTH', '0CWEEK', '0CYEAR', '0CQUART', '0DAT', '0CWD', '0FYEAR', '0FPER', '0FYTCFP',
'0FYTLFP', '0FYTCD', '0CYTCM', '0CYTLM', '0CYTCD', '0LYTCLD', '0CMONTHT', '0CWEEKT', '0CYEART', '0CQUARTT', '0DATT', '0FYEART', '0FPERT'
Best regards,
Andreas -
LOCPT and LOCSL not filled even though partner function maintained
Hi,
In a nomination, I have the problem that the field LOCPT and LOCSL are not filled for one specific plant location even though I have created the in TC O4TQ for the plant and storage location.
I have checked the specific developments in Z_OIJ_NOM_DEFAULTING (BADI OIJ_NOM_DEFAULTING), but the value is already blank even before the exit is processed, so the problem must be in standard coding.
Can someone kindly tell me how I can best debug the problem? I would either like to know which standard function module is defaulting the LOCPT and LOCSL or have someone explain me how I can set a watch point to the field oijnomi-LOCPT, so that I can find out what the problem is.
Thanks for your help in advance
Petra JustHi
The problem is resolved for me ,i have checked further and found that in the vendor master the fax number for the vendor was not maintained correctly because of which the output message was not getting determined and invoice was not getting posted.
i came to know about this error by one tansaction,which i dont remember now..but if you go to SAP and see that the transaction just below MRRL, for automatic invoice posting and try to use that to post the invoice than it will clearly tell you at which stage the message determination is getting failed..there only i came to know that the fax number for vendor was incorrect. -
Bal field "Profit Center" in line item 001 not filled at the time of F-53
We are in ECC6
I have posted a vendor document. The entry is shown as under.
GL CC PC Segment
Dr Expense GL-1 RV01 RGV1 Hyderabad
Dr Expense GL-2 RV02 RGV2 Mumbai
Cr Vednor a/c
but when i am posting a payment document (Dr Bank GL and Cr vendor a/c) to this vendor I am getting the following error.
Balancing field "Profit Center" in line item 001 not filled.
I have check ed the configuration setting in this regard. Zero balance, mandatory fields for profit center and segement check box is enabled. And also the inheratence check box is also enabled.
Pls suggest soulution soon for the above problem.Hi,
Try to default the profit center in FAGL3KEH for the Bank account and try posting.
In SAP, the vendors and customers cannot be assigned to any profit center. They derive the profit center from the profit center picked from the GL as in the case of the expense entry that you mentioned.
Try to assign a default profit center and check.
Regards
Hari -
0HR_PY_1 Datasource: Fields not filled
Hello to everyone!
I'm afraid that I need some help from you. We are extracting HR data via 0HR_PY_1 Datasource and I have noticed that some fields are not filled by the extraction program. I've read BW Online Help about this datasource and I have realized that the extraction program doesn´t fill these fields.
Do you know how can I do to make these fields to be filled?
The fields are:
- KOKRS_CO
Controlling area
Not filled
- CO_AREA_WP
Controlling area of master cost center
Not filled
-LSTAR_CO
Debited activity type
Not filled
VORNR_CO
Debited transaction
Not filled
GSBER_CO
Debited business area
Not filled
KOSTL_CO
Debited cost center
Not filled
BUKRS_CO
Debited company code
Not filled
NPLNR_CO
Debited network
Not filled
AUFNR_CO
Debited order
Not filled
PS_POSID_CO
Debited WBS element
Not filled
Thanks in advance!
Best regards,
Mª Victoria DuráThank you very much for your help but, I'm afraid that the procedure that you explained is for enhancing the datasource but my problem is that the fields already exist but they are not filled by extraction programmes. I don't understand why does SAP make this and I was wondering if there are any way to make these fields to be filled using the standard procedure. I mean, if these fields are not filled (and SAP tells you so in BW Online Help), why these fields are included in the extract structure and in the datasource?. I tend to think that there are any procedure to follow in order to fill these fields. What do you think about it?. In adition, the not-filled-fields are CO objects so it doesn´t appear to me to be very easy the filling of them.
I don't know if anybody has been in the same situation or if is there any documentation about it that can help. Thank you for your help!
Mariví -
To use a Sap Exit variable in a diferent infoobject of the same type
Hi gurus,
I have the Sap Exit standard variable 0P_KEYDT in the infoobject Posting Date (0PSTG_DATE), and i need use this variable with the Document Date (0DOC_DATE), but i don´t have it in the infoobject. Both infoobjects are referenced by 0DATE.
Are there some way to copy the variable from one infoobject to other, or i need make my own exit?
Thanks in advance and regards.If both of them are the same type means they are referring to 0DATE, then you should be able to access the standard variable defined. What you need to do is, delete the variable and recreate it, but when you recreate the variable don't refer to a characteristic 0PSTG_DATE but refer to date object so that it will be available to all date types.
I will tell you the side effect of doing this, changing the standard definition is always risky because if someone install the object again, then the change you made will be overwritten and hard to know what happened.
thanks.
Wond
Maybe you are looking for
-
How is R&D treated... Will we create a another plant for it or we will assign it a cost center to an existing plant.
-
Best Practice to implement Business Packages
Hello All, Need some clarification - What is the best practice to implement ESS/MSS Business Package onto Portal - (1) Should I just import and configure the content OR (2) Should I import, create a copy and then configure it? If yes, are there a
-
Sun Application Server 8.2
When I try to debug my enterprise application in netbeans 5.0, I get the following errormessage: Deploying application in domain failed; Could not rename C:\Sun\AppServer\domains\domain1\applications\j2ee-apps\entityautocomp to C:\Sun\AppServer\domai
-
The photos must be viewed in sequence as prepared with the filenames I have chosen to describe them. How can I just simply transfer this over to a dvd ? Any help is appreciated ! Thank You
-
my BT yahoo email account doesn't accept my password when my Mac tries to access it using mac mail but when I access My BT Yahoo via Safari it accepts the password.