SAP-Exit option not available in Query Designer

Hi,
I'm trying to create a variable in BEx Query Designer that is processed by a SAP-Exit . But I don't have the option "SAP-Exit" in the drop down menu for processing type (from SAP-Help: In the variables editor, choose the processing type SAP Exit from the General tab page.).
Am I missing any rights? Any ideas where the problem might be or is this just not possible at all and I have to use a customer exit?
Regards,
Alexander

Hi, I think I didn't explain my problem right:
I'm trying to use a variable in BEx Query Designer created by SAP that will be processed by a SAP-Exit. How can I add a SAP variable in BEx? I thought I have to create an own variable and assign "SAP-Exit" as processing type . But obviously this is wrong as I don't have the option for processing type "SAP-Exit". Any ideas?
Thanks,
Alex

Similar Messages

  • Hierarchy node not available in Query Designer

    Hello Gurus,
    I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
    Thanks,
    Mark

    Hi Mark,
    You said you "find the hierarchy node variable in BW but it is not available in query designer".
    How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
    For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
    Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
    Regards,
    Patricia

  • Mapped characteristics in Multiprovider not available in Query Designer

    Hi,
    we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer.  Is there maximum limit for the number of characteristics.
    Thanks,

    Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

  • Value Ranges option not available in Query

    Hi ,
    I am trying to hardcode some GL ranges in Query global filter in prodution environment.
    But i feel strange the option is not available.
    I dev while creating new Query i have the option.
    Did any one face this kind of strange problem.
    Please adivce.
    Thank

    HI Kiran,
    You don't have authorization to see the value ranges.
    Login with other id which have the full permissions and check.It it is problem with authorization.
    Hope it helps.
    Thanks & Regards,
    Ramnaresh.P.

  • Navigational Attributes Not Available in Query Designer

    I don't see navigational attributes under Dimensions/DimensionA in Query Designer. Is there a switch to enable/disable nav attr. in BW?

    Hi,
    Yes you need to switch on Navigational charateristics at DSO/CUBE and then add them to MultiProvider Dimension and assign then assign the fields.
    Thanks,
    Nagarjuna

  • Infoobject in infoset but not displaying in query designer

    Hi,
    I have created a query on infoset(ods1 & ods2).
    a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
    pls give your inputs,for why this infoobject is not available in query designer.
    Thanks
    Radika

    Hi Radika,
    I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
    Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
    Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
    Do this and see if it helps.
    Thanks & regards,
    Nikhil

  • Preview on [device name] option not available

    Preview on [device name] option not available on Folio Overlays

    In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
    Are you using InDesign CS5.5 or InDesign CS6?
    You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
    Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
    Uwe

  • I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

    I have the latest version of photoshop cc. Why is the focus selection option not available ?

    Use CC 2014 menu Help>System Info... use its copy option and paste the info here.  So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

  • Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

    Hi everyone,
    I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
    Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
    What does this mean?
    Regards
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified       

    Any idea?
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

  • WLAN override option not available for WLC 4402 - 6.0.196.

    Hi All,
    Its kind of weird BUT it seems that the option for WLAN override is missing.u.
    I could find it on the lower version BUT not on the 6.0.196.
    Please help.
    Does this mean I could only set it up via the WCS and not the WLC directly.
    Thank you.
    Warmest Regards,
    Azzafir Ariff Patel.

    Hi Scott,
    Thank you so much for the clarification.
    Thanks again.
    Quoting fella5 :
    azzafir,
    >
    A new message was posted in the Discussion thread "WLAN override
    option not available for WLC 4402 - 6.0.196.":
    >
    https://supportforums.cisco.com/message/3042635#3042635
    >
    Author : Scott Fella
    Email : [email protected]
    Profile : https://supportforums.cisco.com/people/fella5
    >
    Message:

  • Icm trace level if smicm and SAP MMC are not available ( CE system on Unix)

    Hi Experts,
    Could you please let me know how will I increase the icm trace level if SMICM transaction code and SAP MMC are not available.
    I have an CE 7.2 system running on HP UNIX.
    Thanks and Regards
    Syam

    http://help.sap.com/saphelp_nw70/helpdata/en/0b/6aedff404d6b4a8cac8f1359e1b47c/frameset.htm
    kill -USR2 <pid>
    Markus

  • Option not available to add skype to go number in ...

     Option not available to add skype to go number in canada.... Urgent its been 1 week

    venkatesh wrote:
     Option not available to add skype to go number in canada.... Urgent its been 1 week
    Skype To Go numbers are available in the following countries:
    Australia
    Canada
    Chile
    Denmark
    Estonia
    Finland
    Greece
    Hungary
    Ireland
    Latvia
    Lithuania
    Luxembourg
    Mexico
    New Zealand
    Poland
    Portugal
    Romania
    Slovenia
    Singapore
    South Africa
    Sweden
    United Kingdom
    USA
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • HT204053 iCloud option not available on MacBook Air

    Why is the iCloud option not available on my MacBook Air?  It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.

    r_lopez wrote:
    Why is the iCloud option not available on my MacBook Air?  It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
    iCloud won't appear in System Preferences in Snow Leopard. But, you can get some of the features of iCloud working with 10.6.
    Mail AND iCal work just fine. See this article: http://bit.ly/LvVCR2
    I use the iCal info on two of my own Macs and it works fine. The Address Book hack is a maybe. Read through the comments associated with the blog entry. Some folks have gotten the AB hack to work by locking the plist file.

  • Filter by "Result from another query" option not available in Webi

    Hi all
    I am trying to filter one query by zipcode based on the results of a previously run query in the same report. However this option is not available on the drop down when I drag zipcode into the filter pane. I am restricted to the options: Constant, Value(s) from a list, Prompt or Object.
    I have "use subqueries enabled" within my universe and the data is held in an RMDBS (i.e. it is not an OLAP universe) so I expected this functionallity to be available.
    I am using XI 3.2 and Java version 1.6.0.15, i.e. up to date.
    Any help would be greatly appreciated.
    Thanks
    Sharon

    Sharon,
    Here is one method to achieve your objective, however, it involves the use of Merge Dimensions.  Here goes:
    In the Edit Query mode, build two queries, where the first query has all the objects, to include Zip code, and the second query has the zip code, filtered for the one at hand.  (you probably have done this portion already)
    In the Edit Report mode, think of your data set as Query1 (all the data objects you want) and Query2 (zip code and filtered on that zip code) and thus you'll have Query1.zip and Query2.zip.  If you build a grid containing all the data you want from Query1, then simply add Query2.zip to that grid, voila, the grid will be "filtered" due to the "merge" that occurs under the wire.  The 'problem' here is that you have two columns that are repetitive and there is no inherent way to "hide" a column in WebI other than masking the column with white on white (font/borders) or some folks sometimes apply Alterters to achieve the same.
    Best of luck in moving forward with your task.
    Thanks,
    John

  • Menu option not available in SAP GUI transaction in Portal

    Hi all,
    When accessing SAP Transaction iview via the portal 7.31 the drop down menu option is not available in the first session.
    It is available in the second session and when accessing SAP Traansaction directly from the SAPLOGON pad, the option allows users to open other sessions and stop transactions.
    How can we enable the menu option in Transaction iview in Portal? 
    Plz find the attaches screen shot of error.

    Hi Chandra,
    Can you try the same senario with broswer compatible mode?
    Because these function will be over ride the style sheet.
    Thanks
    Patrick

Maybe you are looking for

  • Trying to get a return value from a Stored Procedure

    Hi folks, I have been tasked with something I thought was simple, but apparently its not that simple.  I am trying to call a Stored Procedure in UCCX that will do some calculations and returns back an integer value.  The stored procedure call I have

  • Further help with sound please

    further help with the sound. i have a sound in stage channel 1 which i want to play as soon as the movies starts. and the user is able to control it by pressing the pause button property pPaused on beginSprite me pPaused = 0 end on mouseUp me if pPau

  • Pop-Up inbound-plug parameters

    Hello, i want co call a Pop-up with a interface view from another component. The code i use: data lo_window_manager type ref to if_wd_window_manager. data lo_api_component  type ref to if_wd_component. data lo_window         type ref to if_wd_window.

  • Update time capsule, since ipod not connect wifi to time capsule

    Hello, Since I update my Time Capsule(7.5.1), I cannont connect my ipod touch to wifi time Capsule. message ipod is : impossible de rejoindre le réseau RES_Didier My iMac is connected, my PC Windows is connected ans my Apple TV to. Only my ipod canno

  • HT4623 i cant figure out how to update my ipod

    i cant figure out how to update my ipod touch from 4.2.7 to ios 7