SAP HR LSO: Removed fields on course (Object E)

Dear all,
When booking a Course in LSO there the section (with fields) called the "price and cost assignment". We would like to remove this from the Course. Would anyone know if it is possible to remove this, and how?
We would also like to remove the field "tutor".
Thanks for your help!

Hi Brosimba,
You can customize the BSP application for the learner portal by copying the BSP application (HCM_LEARNING) to a Z-variant. In there, you can modify the screens you want.
Afterwards, you can link you z-pages into the original learner portal via customizing view LSPAGE_ALIAS_C
The entry point for the application remains in the original application HCM_LEARNING.
Best regards,
Luk

Similar Messages

Su21 - remove fields from authorization object.

Hi,
Using su21 I have added the field USER into the object class SD -> V_VBAK_VKO. Now I need to remove it and I do not know how. Editing the object, there is not any option or button to remove authorization fields. It is very strange because I can add fields but I cannot remove them.
Thanks in advance,
Ricard.

I do not know what I can do.
I can not remove the manually added field at V_VBAK_VKO authorization object.
If I try to create V_VBAK_VKO object appears the following message: u201Cthe name does not conform with the standardu201D. I think its name has to begin with Z or Y.
I can not leave the authorization object like its initial status, with VKORG, VTWEG, SPART, ACTVT authorization fields.
As a result, I can not modify the roles where this object is used. u201CAuthorization default values of transaction VA03 for object V_VBAK_VKO inconsistentu201D.
Thanks in advance,
Ricard
Edited by: Oscar Barrabes on Jun 19, 2009 1:01 PM

Remove fields from ODS objects with data

Hi
Is there a smartway to delete the infoobjects from an ODS without deleting contents? These fields are just added to ODS, and activated the ODS. But, now we donot want them and want to delete these objects from ODS. Any ideas???
Thanks

Hi,
If it will not be possible for you to reload the data to the ODS after deleting, you can try to create a copy of this ODS, move the data from original to copy, delete data in original, make changes and reactivate, and then move data back from copy to original.
Hope this helps...

Remove fields from MSS (60.1.2) iViews

Hi, I have one issue related to removing fields from standard iViews in MSS 60.1.2. Could this be handled by object and data provider customizing in R3 or do I have to develop an new iView?
/Regards
Patrick

Patrick,
From what I found , the information comes from the following function module:
HRWPC_RFC_EP_READ_GENERALDATA
Returns the following:
The system determines the contact data according to the following procedure:
       1.      The system reads office and telephone data from infotype Internal Control (0032)
       2.      The system reads infotype Communication (0105)
                            a.      The system reads the e-mail address (subtype 0010)
                            b.      If the Internal Control (0032) infotype does not contain a telephone number, the system reads the telephone number from subtype 0020.
       3.      If the system cannot find the data when reading the infotypes and subtypes, it reads user data.
The system reads the remaining data from the Organizational Assignment (0001) and Basic Pay (0008) infotypes.
And does not seem to look at any configuration in the IMG for determining columns.
Have you considered modifying:
EEProfileGeneralData.jsp
which is the name of JSP used for display?
Hope this helps.

Remove fields like All ASN's & shipping notifications

Hello All,
Can anyone help me to remove fields like All ASN's and Shipping notifications from the SRM SUS portal screen? Please help.
Regards,
Jones Praveen.S

Hi Jones,
what is displayed in the menu on the left side depends on the users role, respectively on the role menu defined in the role. Should you want to change this, you can create your own custom version of the standard role and remove any entries not wanted.
The content in the main area of the SUS start page depends on the users authorization. Authorization object BBP_SUS_P2 will control to which documents the user has access and according to that the content will be shown or hidden in the start page.
regards
Zoltan

P_GROUP Field in S_DEVELP Object?

Hi Experts,
When user needs a S_DEVELOP Object,provides the SU53 with P_Group as <dummy>.We also provides the user with S_Develop with P_GROUP as blank.Even P_GROUP field is blank, user is able to work.Then what is the purpose of P_Group field in S_Develop?
Kindly help me.
When I searched in Internet,I am not able to get enough information about P_GROUP field on S_DEVELOP Object.
Regards,
Karthika

p_group in s_program is used for submitting the report, protecting variant maintenance, scheduling it in a background jobstep, etc. So, it is for using the report.
p_group in s_develop is used for the development environment of the report, such as maintaining text elements, navigation in where-used-lists, changing the report attributes - which include the authorization group itself.
If an auth group has been set via report RSCSAUTH, then it implies an intention to use it for S_PROGRAM control in SA38, SM37, etc. S_DEVELOP works better using packages and object types in my opinion.
If you attempt to change the auth group via SE38, SE80 etc when it has already been set from RSCSAUTH, then the system will warn you. But you can accept the warning and create an inconsistency for a while... rather always use RSCSAUTH for both when making changes.
S_PROGRAM is more usefull for you to use the group in security, but S_DEVELOP is stronger. Please be carefully with all aspects of object S_DEVELOP.
Cheers,
Julius

Can't add database field or text object to a report (new and existing)

We have Crystal Report 8.5 and when trying to modify an existing report or create a new report, I can't seem to add any database fields or text objects in my report. I get a prohibition symbol (circle with a backslash inside it) when I hover over the report. Has anyone encoutered something like this? Any suggestions? Thank you.

Do you have two monitors?
I had this problem if I tried to open crystal in the second monitor, move it back to primary monitor and it should be OK.
Ian

Com.sap.tc.cm.base.exception.BaseModelRuntimeException: No object for....

Hi Experts,
Iam using adaptive webservice model, for this when i run the application it shows the below exception,
Connection IO Exception. Check nested exception for details. (Connection Exception; nested exception is:
com.sap.tc.cm.base.exception.BaseModelRuntimeException: No object for mandatory target role 'RequisitionItems' of model class 'com.sap.demo.sampleapplication.wd.models.samplemodel.RequisitionGetitems' with cardinality 'ONE' maintained).
[EXCEPTION]
com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Connection Exception; nested exception is:
com.sap.tc.cm.base.exception.BaseModelRuntimeException: No object for mandatory target role 'RequisitionItems' of model class 'com.sap.demo.sampleapplication.wd.models.samplemodel.RequisitionGetitems' with cardinality 'ONE' maintained).
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeRequest(SOAPTransportBinding.java:1705)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.writeSOAPRequestMessage(SOAPTransportBinding.java:257)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1280)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:960)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:915)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceInvokerImpl.invokeOperation(DInterfaceInvokerImpl.java:76)
at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable.execute(WSGenericModelClassExecutable.java:73)
Thanks in advance
Regards,
Pradeep Kumar G

Hai abhinav,
Thanks for reply,
Detailed description of my scenario:
Iam using Adaptive webservice model for accessing some data based on some input values.
In web service navigator it is working fine. when i give any input values based on that input the output records are available.
But when i used it in webdynpro java, it gives an exception and asks for manadatory input values but actually in that webservice there are no mandatory input values, ok i provided that input values based on that exception, then it gives the below exception
Connection IO Exception. Check nested exception for details. (Connection Exception; nested exception is:
com.sap.tc.cm.base.exception.BaseModelRuntimeException: No object for mandatory target role 'RequisitionItems' of model class 'com.sap.demo.sampleapplication.wd.models.samplemodel.RequisitionGetitems' with cardinality 'ONE' maintained).
[EXCEPTION]
com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Connection Exception; nested exception is:
com.sap.tc.cm.base.exception.BaseModelRuntimeException: No object for mandatory target role 'RequisitionItems' of model class 'com.sap.demo.sampleapplication.wd.models.samplemodel.RequisitionGetitems' with cardinality 'ONE' maintained).
I used the code in the link you have mentioned, but it cannot solved my problem. Same exception is occurring.
Share whether you have any idea on this..
Regards,
Pradeep Kumar

Sap query and additional fields.

Hello guys.
ABAP it's not my strong skill, but i need to develop some report.
What i need:
input: material, SLED, plant
output: material, SLED, plant, values from characteristic field.
I have created sap query with additional field type c.
Below my code:
TYPES: BEGIN OF charast,
        ATNAM(50)    TYPE c,
        ATWTB(8)     TYPE n,
        X(50)        TYPE n,
        C(50)        TYPE n,
        ATINN(50)    TYPE n,
        END OF charast.
DATA: char TYPE TABLE OF charast WITH HEADER LINE.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
   EXPORTING
     MATNR              = MCH1-MATNR
     CHARG              = MCH1-CHARG
     GET_CLASSIFICATION = 'X'
   TABLES
     CHAR_OF_BATCH      = char.
LOOP AT char into TEST (This is an additional field type C.
   ENDLOOP.
Questions:
1. How i can return internal table into standard abap type, because i can create additional field only with standart types.
2. Need i fetch exporting parameters before calling FM? Or sap query do it automatically, based on given values on selection screen of the report?
3. How i can return only needed field from FM output? Now, when i'm executing FM via SE37 it's show desired result, but when i'm getting it from code i see strange values.
4. If i don't know exactly return by an FM values, how i can fill structure dynamically?
5. How i can return result of a program not only to additional field but to layout?
Sorry for noob questions and thank you in advance guys!

Well, seems like it work fine for me.
Below my crappy, but working code:
DATA: material TYPE MCHB-MATNR,
       batch    TYPE MCHB-CHARG,
       plant    TYPE MCHB-WERKS,
       sloc     TYPE MCHB-LGORT,
       gtdt     TYPE STANDARD TABLE OF clbatch,
       gtdit    TYPE clbatch.
SELECT MATNR INTO material FROM MCHB
   WHERE MATNR = MCHB-MATNR.
ENDSELECT.
SELECT CHARG INTO batch FROM MCHB
   WHERE CHARG = MCHB-CHARG.
ENDSELECT.
SELECT WERKS INTO plant FROM MCHB
   WHERE WERKS = MCHB-WERKS.
ENDSELECT.
SELECT LGORT INTO sloc FROM MCHB
   WHERE LGORT = MCHB-LGORT.
ENDSELECT.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
   EXPORTING
     MATNR = material
     CHARG = batch
     WERKS = plant
     GET_CLASSIFICATION = 'X'
    TABLES
      CHAR_OF_BATCH = gtdt.
READ TABLE gtdt INTO gtdit
   WITH KEY atnam = 'BATCH_SHELF_LIFE_EXPIRY_DATE'.
GTD = gtdit-ATWTB.

Removing fields from function profiles

Hi
Some one please help me in removing fields from a function profile. PFA for your reference
Regards,
Prem

Hello Prem,
Can you check the HTML-coding of the view? What is the name of the view? I could also check it in my system, even as we are not using this specific view. My other thought was, that it is a button, then you could remove it from the internal table GT_BUTTON of the IMPL-class of the view, but after rethinking I think it might be in the HTML-coding.
Best regards,
Thomas Wagner

User defined fields in Resource object; Resource object form

Hi,
Can anyone tell me what is the purpose of having user defined fields for resource object and resource object form and how can we use those fields while requesting for target resource.
Regards,
Alabhya Goel

Thanks for your reply!!!!!!!!!!
I know about resource object form i am just asking what is the use of user define field in resource object form. How can we use it. Like when we create any user defined field in under User form those fields display on create user form but when we create any user defined field in resource object from those are not displayed in form.
If anyone has used or worked on user defined fields in Resource Object or resource object form; please give me an overview over the same.
Regards
Alabhya Goel

Add/ remove field on "Convert Lead"

Hi All,
Is it possible to edit/ remove field present on "Convert Lead" page.
When we try to convert a lead to opportunity on the "Convert Lead" page we can view below fields under "Opportunity" section
Do Not Convert to Opportunity // Auto-Create New Opportunity //Opportunity Name //Revenue //Close Date//Next Step //Description.
Is it posible to add or remove any fields.
thanks

Not in the current release this will be available on version R17 which will begin roll-out in March for the first PODS.
In R17 you will be able to customise this alot more.

[ORA-22905] How to read a field of an object inside another object?

Greetings,
I'm a student and in a current exercise we have to work with the Object Oriented Programming functionality of Oracle.
In the database we defined an object type, which is then considered inside another object type. The thing is, that I cannot read an attribute of the inner object. I've read tens of websites but none of them have helped so far. I've read the PL/SQL User Guide and Reference document also.
The inner object is defined as follows:
create type address_t as object (
        street varchar(50),
        city varchar(50),
        pcode number(5,0)
        );The outer object has an object of type address_t inside it:
CREATE TYPE professor_t as OBJECT(
          code number(2),
          p_name varchar(50),
          address address_t,
          );Also, there is a table named PROFESSORS that stores objects of type professor_t
First of all, with a simple testing SQL statement I can see the data inside the object professor, even the object address_t:
SELECT * FROM PROFESSORS WHERE CODE = 13;returns the following:
CODE    |         NAME      |       ADDRESS
13      |         JOHN     |       MYSCHEMA.ADDRESS_T('FIFTH AVENUE','NEW YORK',12345)The thing is, I want to read the field street of the object address (of type address_t) inside professor (of type professor_t).
I could see everywhere that the way to go is to use point notation, and I've seen examples about the command VALUE, but none of the following SQL statements work:
SELECT VALUE(ADDRESS.STREET) FROM(
SELECT CODE,P_NAME,ADDRESS FROM PROFESSORS WHERE CODE = 13);
SELECT ADDRESS.STREET FROM PROFESSORS WHERE CODE = 13;
SELECT PROFESSOR.ADDRESS.STREET FROM PROFESSORS WHERE CODE = 13;I'd really appreciate if someone could show me how to access the values of the field of the object inside an object.
Thanks in advance,
- David
Edited by: 858176 on May 11, 2011 6:53 PM Formatting

Great, this worked so far.
It is curious that you wrote 'profesores' but that is the actual name for the variable. I translated everything to english in order to post it here.
So, the statement is:
select value(t).DIRECCION.CIUDAD from profesores t;And It returned:
VALUE(T).DIRECCION.CIUDAD
Valencia
New York
TijuanaAnd, applying the VALUE command to the statement:
select codigo,
nombre,
value(t).DIRECCION.CALLE,
value(t).DIRECCION.CIUDAD,
value(t).DIRECCION.CP
from profesores T WHERE T.CODIGO = 13;Resulting in:
CODIGO                 NOMBRE                                             VALUE(T).DIRECCION.CALLE                           VALUE(T).DIRECCION.CIUDAD                          VALUE(T).DIRECCION.CP
13                     Pepito Pérez                                       Calle de los Rosales 0                           Valencia                                           46023                  That is EXACTLY what I needed.
Thanks Thomas, It was really helpful !
Edited by: 858176 on May 11, 2011 7:46 PM

Remove duplicates for list object

Hi,
I have retrieved all the xml node values in List<object>. Now, I want to remove all the duplicates objects from that list.
Example:
If the object has n properties, I should remove only duplicate objects that have same values in all the n properties not just one property as ID or name. Please let me know how to achieve this. Preferably using LINQ.
Thank you.
Regards,
Kiran

You can use a GroupBy. I took the code from last posting
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Xml;
using System.Xml.Linq;
using System.IO;
namespace ConsoleApplication1
class Program
static void Main(string[] args)
string file1 = "<?xml version=\"1.0\" encoding=\"utf-8\" ?>" +
"<Methods>" +
"<Method>" +
"<ID>1234</ID>" +
"<Name>manager</Name>" +
"<Path>path1</Path>" +
"</Method>" +
"<Method>" +
"<ID>5678</ID>" +
"<Name>manager</Name>" +
"<Path>path2</Path>" +
"</Method>" +
"<Method>" +
"<ID>5678</ID>" +
"<Name>manager</Name>" +
"<Path>path2</Path>" +
"</Method>" +
"</Methods>";
string file2 = "<?xml version=\"1.0\" encoding=\"utf-8\" ?>" +
"<Methods>" +
"<Method>" +
"<Path>path1</Path>" +
"<Description>text</Description>" +
"</Method>" +
"<Method>" +
"<Path>path2</Path>" +
"<Description>text</Description>" +
"</Method>" +
"</Methods>";
string file3 = "<?xml version=\"1.0\" encoding=\"utf-8\" ?>" +
"<Methods>" +
"</Methods>";
StringReader reader = new StringReader(file1);
XDocument doc1 = XDocument.Load(reader);
reader = new StringReader(file2);
XDocument doc2 = XDocument.Load(reader);
reader = new StringReader(file3);
XDocument newXDoc = XDocument.Load(reader);
var results = from e1 in doc1.Descendants().Elements("Method")
join e2 in doc2.Descendants().Elements("Method")
on e1.Element("Path").Value equals e2.Element("Path").Value
select new XElement("Method", new object[] { e1.Element("ID"), e1.Element("Name"), e2.Element("Description") });
var results2 = results.AsEnumerable()
.GroupBy(x => x.Element("ID").Value);
var results3 = results2.AsEnumerable()
.Select(x => x.Take(1));
newXDoc.Descendants("Methods").Last().Add(results3);
jdweng

SAP CRM Tables and Fields for Contract start and End dates

Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja

correction
10 Replies Latest reply: 24 May, 2013 8:38 AM by nishant Vasudev
Tweet
SAP CRM Tables and Fields for Contract start and End dates
This question has been Answered.
Teja Dhar 12 Oct, 2009 8:03 PM
Currently Being Moderated
Hi Experts,
Please Provide me SAP CRM Tables and Field names for the below.
SAP CRM Contracts start date and End date
SAP CRM Conditions(PROO, K007 etc....) records start and End Date.
Thanks and Regards,
Teja
Correct Answer by Sreekantha Gorla on Oct 22, 2009 8:22 PM
Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
<:footer>See the answer in context
6281 Views
Topics: Customer Relationship Management
Reply
Average User Rating
0
(0 ratings)
My Rating:
Rating Saved!
Comment on your rating
Re: SAP CRM Tables and Fields for Contract start and End dates
Robert Jesionowski 14 Oct, 2009 2:23 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
you should try with FM: CRM_DATES_READ_SINGLE_OB or CRM_DATES_READ_DB.
There is something in table SCAPPT and SCGENAPPT.
Regards, R
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:30 PM (in response to Robert Jesionowski)
Currently Being Moderated
    Hi Robert,
I am not able to find contract start date and End dates in the tables SCAPPT and SCGENAPPT.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 2:35 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
Table SCAPPTSEG stores the contract start and end dates.
Thanks,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 22 Oct, 2009 5:32 PM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi Sreekanth,
I am not able to find contract start date and End dates in the table SCAPPTSEG.This is for appointments.
Can you suggest some relevant tables.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Correct AnswerRe: SAP CRM Tables and Fields for Contract start and End dates
Sreekantha Gorla 22 Oct, 2009 8:22 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi,
dates will be stores in the table 'SCAPPTSEG'.
I double checked it. This table stores all the date types of one order transactions...
The relationship is as follows..
CRMD_ORDERADM_H- guid = crmd_link-guid_hi
crmd_link-guid_set = SCAPPTSEG-APPL_GUID.
Thanks and regards,
Sreekanth
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Wim Olieman 23 Oct, 2009 9:12 AM (in response to Sreekantha Gorla)
Currently Being Moderated
    Hi,
I can tell you where the pricing records are saved, replicated from ECC.
The data from ECC table Axxx (e.g. A304) is replicated to CRM table
CNCCRMPRSAPxxx (e.g. CNCCRMPRSAP304).
Here you can find fields TIMESTAMP_TO and TIMESTAMP_FROM.
About the dates: what Sreekantha Gorla stated, about table 'SCAPPTSEG' is correct.
What might help is to execute program "CRM_ORDER_READ". Here you can find
the relevant entries also.
regards,
Wim
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
Teja Dhar 23 Oct, 2009 4:59 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Experts,
Thanks a lot for your support.My problem got resolved.
Best Regards,
Teja
Report Abuse
Like (0)
Reply
Re: SAP CRM Tables and Fields for Contract start and End dates
rajesh gadamsetty 27 Nov, 2009 12:29 PM (in response to Teja Dhar)
Currently Being Moderated
    Hi Teja
Please let me know how you got the dates. i got the same requirement
Report Abuse
Like (0)
Reply
Correction on above mail.
Hi Sanjay,
Can you please help me to find the contract st art date and end date fetching from the table as below
ITEM DATES:
Select guid_set from table CRMD_LINK where guid_hi              = CRMD_ORDER_I-GUID AND
                                                                          OBJTYPE_HI     = '06'
                                                                          OBJTYPE_SET = '30'.
Select * from SCAPPTSEG where APPL_GUID = guid_set.
as from the table scapptseg has some unusal fields which fields to select to get the start date and end date and on what condition and isuppose we need to convert als the same
pls suggest further on same
regards
Arora

SAP HR LSO: Removed fields on course (Object E)

Similar Messages

Maybe you are looking for