SAP Inbound Proxy Error

Hi Experts,
I am facing an issue when executing inbound proxy message. After the message completed, the message status end up with Error. The error says below details.
"Information about the method parameters is missing
for the interface INTERFACE_NAME
(ABAP interface, request message MT_Fault, request
message namespace....)"
I am also raising Fault messages from ABAP Proxy message programming. In SXMB_MONI while expanding all the messages I can able to see the application message but also i am seeing the above mention errors.
Any Idea why this error appears?
Thank you
Magesh.

Hi Diptendu - I don't think it's an issue with URL.
Did you register the service?
http://<host>:<port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicati
onOutSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&m
ethod=ValueMappingReplicationOutSynchronous
Reference :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e07dd2ae-f783-2c10-9aa6-ca69f67dd20f?QuickLink=index&…
what is your receiver channel?

Similar Messages

ABAP Inbound Proxy Error !

Hi ,
I am forwarding Vendor Data from SRM EBP to SUS with the predifined proxies given by SAP, bu t i get below error when it reaches SUS System.Message processing both in SAP EBP and SAP XI is fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX_TRADING_PARTNER_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack> <SAP:Retry>M</SAP:Retry>
</SAP:Error>
Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application

Hi attached trace, kindly update wat could be the problem in case of EBP SUS Vendor replication
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=receiver</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = SSR</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = WIP-SRINUS</Trace>
<Trace level="1" type="Timestamp">2008-04-25T04:58:21Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = DD128437FD4A75F193690017A4F3435A</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0001</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0001</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface SupplierPortalTradingPartner_CreateOrChange_In*</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/SupplierEnablement</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SSR</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = WIP-SRINUS</Trace>
<Trace level="1" type="Timestamp">2008-04-25T04:58:24Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
- 
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<CX_ERROR href="#o97" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SY_NO_HANDLER id="o97">
- <CX_ROOT>
<TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
<PREVIOUS href="#o96" />
<KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
- <INTERNAL_SOURCE_POS>
<PROGID>297</PROGID>
<CONTID>1564</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
<CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>
</CX_SY_NO_HANDLER>
</cls:CX_SY_NO_HANDLER>
- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o96">
- <CX_ROOT>
<TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>297</PROGID>
<CONTID>1738</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_DYNAMIC_CHECK />
<CX_AI_APPLICATION_FAULT />
- <CX_BBPX1_STD_MESSAGE_FAULT>
<AUTOMATIC_RETRY />
<CONTROLLER />
<NO_RETRY />
- <STANDARD>
<CONTROLLER />
*<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_BUPA:034 -Organizational unit 00000008 does not exist; check entries Programm:* CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
</STANDARD>
</CX_BBPX1_STD_MESSAGE_FAULT>
</cls:CX_BBPX1_STD_MESSAGE_FAULT>
</asx:heap>
</asx:abap>
</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>

Call Inbound Proxy error

PI settings help
I am trying to transfer PR from ERP6.0 EHP4 to SRM7.0 using CPPR scenario.
I configured ERP/SRM and PI configuration in Integration directory.
But i get Reciever determination error in XML at ERP/SRM AND PI
RCVR_DETERMINATION">NO_RECEIVER_CASE_BE
Error Text: No receiver could be determined
In SRM, Inbound Message(reciever) is green but Call Inbound Proxy is giving below error.
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing! <Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
I tested configuration in Integration directory.
Sender aggreeemnt is green
Reciever determination is red and giving below error.
Internal Error : You do not have sufficient authorization for this operation.
I have done below setting in Integration directory.
Business system setting.
1.Selected Business System BC_MM_MXX_594
2.Create communication channel(Gen_Rec_xi) as Receiver
for above Business system BC_MM_MXX_594.
-Use adapter type XI, http://sap.com/xi/XI/System SAP Basis7.xx and RFC MXX_Integration,
1.Selected Business System BC_SRM_SXX_300
2.Create communication channel(Gen_Rec_xi) as Receiver
for above Business system BC_SRM_SXX_300.
-Use adapter type XI, http://sap.com/xi/XI/System SAP Basis7.xx and RFC SXX_Integration.
-->>one doubt here? Should i have to create Comm channel for sender type also from ERP and SRM? pls confirm.
I created object in Integration directory as follows.
Create Object by selecting Business System BC_MM_MXX_594.
1)Selected Internal communication
2)Reciever Determination : BC_MM_MXX_594 PurchaseRequestERPSourcingRequest_Out
3)Specified Interface determination : BC_MM_MXX_594 PurchaseRequestERPSourcingRequest_Out BC_SRM_SXX_300.
4)Specified Reciever agreement BC_MM_MXX_594 BC_SRM_SXX_300 PurchaseRequestERPSourcingRequest_in(communication channel selected is Gen_Rec_xi)
5)Generated Objects and saved as CPPR_scenario.
6)Activated all objects created in CPPR_Scenario.
Pls suggest something wrong with Reciever determination?
How to find where the problem is located? at ERP or PI or SRM?.
Also onething i noted is Integrated configuration is empty in Integration directory.
Any configuration should be done for IOC.? pls confirm.
Regards
Chandra

Also i noticed below
In ERP xml ->Inbound message(SENDER).
Does this error indicate problem while sending from ERP to SRM or SRM to ERP.
because i can see sender service and interface is empty and SAP reciever is having ERP service.
however reciever does not fetched the corresponding(purchaseRequestxxxxxxx) interface names.
- <SAP:Sender>
<SAP:Service />
<SAP:Interface namespace="" />
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>BC_MM_MXX_594</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/APPL">QueryCodeList</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/APPL">QueryCodeList</SAP:Interface>
SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards
Chandra

Inbound Proxy Error in Target System

Hi
My scenario ís MQ>XI>SAp R/3. I am successfully able to pick file from MQ and I see the success flag in SXMB_MONI(XI) and XI sends to SAP R/3 via Inbound proxy.
But on recieving system (R/3) via proxy the data is not recieved correctly.
I see Failure message with error in R/3 SXMB_MONI and the error is as follows.
I guess my Mapping is correct as it passes trhough XI successfully. Is something wrong with the Inbound proxy?
Kindly let me know your views on the same going through the error message I am unable to interpret anything. As the date format which I am recieving is correct.
++
Best Regards
Swetank

Hi,
When u define ur Data type (Messageinterface) dataelement as xsd:Date it is of the format CCYY-MM-DD. (ex 2003-12-31). So yyyyMMdd is not compatable with the ABAP data type that has been generated at the proxy end.
Make sure dats-8 and xsd:Date use the same Date format.This might be the error that i can see.
xsd:date format
http://help.sap.com/saphelp_nw04/helpdata/en/fe/26da4105aa3f5de10000000a1550b0/content.htm
Hope this helps
Cheers,
Siva Maranani.

Inbound Proxy Error - JDBC to PROXY Scenario

Hi experts,
I am getting the following error while activating Inbound Proxy.
Error when creating service node. [unknown]You are not authorized to use function Netzwerkadministration
Exception of class CX_SRT_WSP_ICF
Regards,
Sudheer

Hi Experts,
Thank you for your replys.....Problem got solved......:)
Some authorisation was missing...Now it was fine and I can activate Inbound proxy......:)
Once again Thank you for your replys.....:)
Regards,
Sudheer

Inbound proxy error

Hi
I tested with empty data, i.e no proxy data . It should actually through error, but it is going inside the else part.
why it s happening like that.
example :
it_data = input-table-line.
IF it_data is empty.
   display   Error.
else.
    post the data from proxy to a table.
end if.

Hi,
Controller is a generated add on mainmly used
to influence the XML conversion and generation.
It allows you to suppress generating XML for empty parts of the
message. I am sorry i didnt find the links for the documentation.
Anyway it is not easy to use it as the PI or other message broker
as well as the bank end might refuse an xml you influenced using the controller
e.g. because it does no longer match the public xsd´s.
Regards,
Marcel

Abap Proxy Errors

Hi Experts,
My scenario R/3->XI(ABAP Proxy)--->SUS Systems
Getting the following error in SUS system.XI system it doesn't throw any error in moni.
I am new to proxy concepts.Also please let me know any related blogs or suggestions in this regards.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSIV_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Sudhansu

Hi Behera,
Can you debug your proxy using this blog:
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502a7f0e-e5d9-2910-5aa2-976a8ed8384f&overridelayout=true
Also please check few solutions given in this threads for the same issue:
Re: Messages waiting in SUS Moni
Re: ABAP Inbound Proxy Error !
Regards,
---Satish

Plain HTTP adapter error: Bad Gateway, Proxy Error, please help !

hello all,
i have the following scenario:
filesystem->file adapter->XI->plain http adapter-> receiver system.
the following error occurred while calling plain http adapter:
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_Server</SAP:Code>
<SAP:P1>502</SAP:P1>
<SAP:P2>Bad Gateway</SAP:P2>
<SAP:P3> Proxy Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP-Server Code 502 Reason Bad Gateway Explanation Proxy Error</SAP:Stack>
A RFC-Destination with SSL is used in this scenario. Connection test to the destination machine is also succeeded. some files have been transported to the receiver system, yet without payload. data is lost.
anyone has encountered such problem or anybody can tell me please how to solve this problem.
thanks for your help
regards

Hi,
I´ve found a SAP-Note concerning this error-message 692057
There is the note 450226 gives an overview over error codes
Probably below solution may help you.........
As an administrator on your portal go to:
System Configuration > Service Configuration >applications
Under: com.sap.portal.ivs.httpservice > Services > Proxy
If any proxy settings are configured you may end up with the problem, so you need to set the "nonProxyHosts" to include the trex host.
After a restart the search was working normally again.
Thanks
Swarup

Urgent: Error in Inbound Proxy in SCM system

Hi All
Please give your inputs to solve following problem I am facing. I am working on XI first time so please help me out to solve the following problem. Please let me know if you need any more info.
Thanks a lot for your help guys.
I am sending ORDERS.ORDER05 from R/3(ECC6.0) to SCM (5.0) through XI. I am using standard message interface ReplenishmentOrderNotification_In to send data to ICH configured on SAP SCM System.
I am using XI adapter at receiver end. My message successfully going to SCM. SXMB_MONI, its giving error. After clicking on error flag it displays a table with 3 entries, please find them below.
1. Start of inbound processing: ReplenishmentOrderNotification (ID 0000000000202027) 032(/SCMB/ORDER)
2. TST 20080429202851 (type MessageCreationDateTime) was transferred as local time, interpretation as UTC 022(/SCMB/BIF_MI)
3. Partner key(s) not found 042(/SCMB/MDL_BASIC)
Please find the XML message from ERROR node from Inbound Proxy
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SCMBasis/Global">ReplenishmentOrderNotificationFault</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please find contents of Trace XML message from Inbound proxy
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine/?type=receiver</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = AMOL</Trace>
<Trace level="1" type="Timestamp">2008-04-30T01:31:18Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 48165647672B03B5E10080000A0C640C</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0003</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0003</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface ReplenishmentOrderNotification_In*</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SCMBasis/Global</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = AMOL</Trace>
<Trace level="1" type="Timestamp">2008-04-30T16:19:34Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- 
<Trace level="1" type="T">Persisting message with status ManualRestart, version: 000</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = AMOL</Trace>
<Trace level="1" type="Timestamp">2008-04-30T20:52:28Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- 
<Trace level="1" type="T">Persisting message with status ManualRestart, version: 002</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RAJARANGA</Trace>
<Trace level="1" type="Timestamp">2008-04-30T22:34:19Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- 
<Trace level="1" type="T">Persisting message with status ManualRestart, version: 004</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RAJARANGA</Trace>
<Trace level="1" type="Timestamp">2008-04-30T22:35:19Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- 
<Trace level="1" type="T">Persisting message with status ManualRestart, version: 006</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RAJARANGA</Trace>
<Trace level="1" type="Timestamp">2008-04-30T22:41:24Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- 
<Trace level="1" type="T">Persisting message with status ManualRestart, version: 008</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = AMOL</Trace>
<Trace level="1" type="Timestamp">2008-05-01T00:07:18Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- 
<Trace level="1" type="T">Persisting message with status ManualRestart, version: 010</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = AMOL</Trace>
<Trace level="1" type="Timestamp">2008-05-01T00:30:07Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- 
<Trace level="1" type="T">Persisting message with status ManualRestart, version: 012</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = AMOL</Trace>
<Trace level="1" type="Timestamp">2008-05-01T00:53:39Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- 
<Trace level="1" type="T">Persisting message with status ManualRestart, version: 014</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
<Trace level="1" type="T">***************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SCS</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = AMOL</Trace>
<Trace level="1" type="Timestamp">2008-05-01T01:04:22Z CET</Trace>
<Trace level="1" type="T">-----------------------------------------------------</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
</Trace>
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
Regards
Amol

Hi All
Thanks for your inputs, we are a step ahead now. We applied few notes I will be posting details soon. At the moment we stuck at one poin, its giving a configuration related error. Please find the process log from SXMB_MONI from SCM system. It is saying Buyer missing in fact we have configured BP01 in SCM system and same we are getting from ECC system.
Hope to hear from you soon. Thanks a lot for your inputs.
ReplenishmentOrderNotificationFault
Proxy Class (Generated)
Detailed Information
Start of inbound processing: ReplenishmentOrderNotification (ID 0000000000202043) 032(/SCMB/ORDER)
The active implementation of BAdI '/SCMB/BIF_I_REPLORD' 'BEFORE_CONVERSION' has been run 080(/SCMB/BIF_COMMON)
TST 20080508141414 (type MessageCreationDateTime) was transferred as local time, interpretation as UTC 022(/SCMB/BIF_MI)
The active implementation of BAdI '/SCMB/BIF_MI_PARTYID' 'BEFORE_MASTER_DATA_ACCESS' has been run 080(/SCMB/BIF_COMMON)
Start generic process type determination 000(/SCMB/BIF_CU)
Process type could not be determined - search for standard process type 002(/SCMB/BIF_CU)
Standard process type (ICH) determined successfully 013(/SCMB/BIF_CU)
Start action determination for addresses 070(/SCMB/BIF_CU)
No Customizing found; standard action is 'map all addresses' 072(/SCMB/BIF_CU)
End of action determination for addresses 071(/SCMB/BIF_CU)
Start partner role determination 060(/SCMB/BIF_CU)
Partner role is 'buyer (sold-to party)' 063(/SCMB/BIF_CU)
Partner role determination completed successfully 061(/SCMB/BIF_CU)
TST 20080508000000 (type CreationDateTime) was transferred as local time, interpretation as UTC 022(/SCMB/BIF_MI)
The active implementation of BAdI '/SCMB/BIF_MI_ITMBPRT' 'BEFORE_MASTER_DATA_ACCESS' has been run 080(/SCMB/BIF_COMMON)
The active implementation of BAdI '/SCMB/BIF_MI_PRODID' 'BEFORE_MASTER_DATA_ACCESS' has been run 080(/SCMB/BIF_COMMON)
TST 20081027000000 (type DeliveryPeriodStartDateTime, item 00010, sched. line 1) is local, interpret. as UTC 024(/SCMB/BIF_MI)
Order 4500000105 item 00010: 'DeliveryPeriodEndDateTime' missing in schedule line 1 090(/SCMB/ORDER)
The active implementation of BAdI '/SCMB/BIF_I_REPLORD' 'AFTER_CONVERSION' has been run 080(/SCMB/BIF_COMMON)
BOL processing started for object /SCA/CL_SVORDER process name REPLORDER 006(/SCMB/DM_BOL)
Start: read ODM order 250(/SCMB/ORDER)
End: read ODM order 251(/SCMB/ORDER)
Start: validation framework 254(/SCMB/ORDER)
Validation started for validation profile POC1 (ICH - REPLORDER - HEADER) 606(/SCMB/DM_BOL)
Business partner 'buyer' is missing in order 4500000105 021(/SCMB/ORDER)
Validation for val. prof. POC1 (ICH, REPLORDER, HEADER) ended with errors and warnings 608(/SCMB/DM_BOL)
End: validation framework 255(/SCMB/ORDER)
Start alert notification for application ALEN - time 08.05.2008 19:15:18 - process mode F 504(/SCMB/ANOT)
End of alert notification for application ALEN - time 08.05.2008 19:15:18 - process mode F 525(/SCMB/ANOT)
Start: write ODM order 252(/SCMB/ORDER)
End: write ODM order 253(/SCMB/ORDER)
BOL processing ended for object /SCA/CL_SVORDER process name REPLORDER 007(/SCMB/DM_BOL)
End inb. proc.: ReplenishmentOrderNotification (ReplenishmentOrder ID ) 033(/SCMB/ORDER)

Inbound proxy with system error.

Hi Experts,
                I desighned an inbound proxy scenario which is file to ECC.
               I test the proxy from 'SPROXY" t.code.
               Because of wrong data, it throws an exception as below.
       - <cls:CX_XMS_SYSERR_PROXY id="o125">
- <CX_ROOT>
<TEXTID>8BB7CA726FE56F43BC4A06197ABFE5FD</TEXTID>
<PREVIOUS href="#o117" />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>242</PROGID>
<CONTID>668</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_XMS_SYSTEM_ERROR>
<ID>PARSE_APPLICATION_DATA</ID>
<P1>Request Message</P1>
<P2>CX_ST_DESERIALIZATION_ERROR</P2>
from above, we can tell this is a system error because this exception caught by class'CX_XMS_SYSTEM_ERROR'.
If this is a system error, it has to show a system log in 'SM21'.
but, it's not appearing.
if my understanding was wrong,let me know where it will display these logs.
please let me know your opinion on this.
regards
mahesh.

hai
you can check the below link to debug the application
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
check the t.code sxmb_moni in the receiver SAP
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Error In Inbound Proxy

Hi
I have SRM Scenario were I am sending a Z_CREAMAS_SUSMM IDOC from ECC 6.0 to SRM 5.5 SUS via PI 7.0 . There are no errors on the XI side and the sxmb_moni of the SRM side .The message shows a successful flag on the XI as well as the SRM side . But however the functionality of the idoc does not work ie the vendor is not created in SRM SUS.
When we try to test the inbound proxy from sproxy by copying the payload from sxmb_moni of SRM and then testing it we get a short dump with the following contents .
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "SET_METHOD" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
    "CL_PROXY_INBOUND_ADAPTER======CP" or "CL_PROXY_INBOUND_ADAPTER======CM00I"
    "SET_METHOD"
Can any one please tell me what the error could be .
regards
Nilesh Taunk

Hi,
You program raise an exception as''CX_SY_REF_IS_INITIAL'.
this is due to null value passing to the object.
i hope, u r using intialization event in the custom ABAP code.
please try to change it.
warm regards
mahesh.

CONVT_OVERFLOW Error - Inbound Proxy

Hello,
I have configured an Inbound Proxy and while testing the same, it throws CONVT_OVERFLOW error. I even checked the field whether it is exceeding the required length but it's length is perfect.
Has anyone come acrossed this error.
Regards.
Praveen

Hi,
CATCH SYSTEM-EXCEPTIONS file_access_errors
Exception problem
What is the problem with the code?
Overflow when converting from "2.42855e+009"(CX_SY_CONVERSION_OVERFLOW )
What is the difference between MOVE and WRITE TO ststement?
Converting Char to Quantity field
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8c92d590-0201-0010-5aa0-ee7a993f295c
Extract Numbers from Text Field?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9a2dce90-0201-0010-2b83-f777fb9588f5
Regards
Chilla

Issue while inserting a BDC program in Inbound Proxy.JDBC-- PI-- SAP.

The scenerio is jdbcsender-sappi-inboundproxy(ECC6.0).
The issue is related to SAP Plant Maintenance Module where We have a requirement for creating Maintenance item
programmatically from (SQLDatabase)Legacy Data for one of the interface.
since there are no standard BAPIS/Idocs or function modules available from SAP side for creating the maintenance item. So I
have written BDC program and with the help of submit statement in inbound proxy program, I am calling BDC program for
creation of the maintenance item.
When I tested the program independently on proxy side the Maintenance Item is getting created successfully but when I
executed from end-to-end ie. SQLDATABASE->SAP PI-->SAP. The message is getting strucked into the queue and queue got stopped on SAP.
ECC side and the status of the message is scheduled state on SXMB_MONI transaction of SAP ECC.
As the message is in scheduled state multiple number of Maintenance Items are getting created with the same values.
Has any one of our SAP friends, encountered this type of issue while inserting a BDC program in inbound proxy, please help
in fixing this issue. FYI... I am using sap pi7.0 with service pack 24 and ecc6.0
Waiting for your kind expert guidance...
cheers,
Ram

Raj,
Thanks for the reply. I have tried registering the queues but still the same problem. the message got stuck in the queue of ECC and showing below message in queue.
function module StatusText
SXMS_ASYNC_EXEC connection closed (no data)
I have checked in the forums especially for this issue but no one has provided the answer for this.
Thanks and Regards
Ram

Message has Error status on outbound side - in ABAP inbound proxy !!

Hi All,
One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
Regards
San

Hi ,
Please check whether the correct data is coming from sender side . and check the j2ee engine runtime parameters.
Cheers,
Meera
Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

Calling error/application logs in CRM inbound proxy

Hi All,
In inbound proxy of CRM, I have to call Error/Application logs (for eg:SLG1) whenever an integration process throws some error. Has anyone worked on this kind of scenario to call different application logs in CRM or R3 side inbound proxy.
If so, please give some ideas on this.
Thanks
Deno

Hi Deno,
did you have a look at my blog in which I describe it ?
/people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
Regards,
michal

SAP Inbound Proxy Error

Similar Messages

Maybe you are looking for