SAP MM-IM & WM stock in one report

Hello Everybody,
We are operating SAP MM & WM in two different server and our client requirement is to see the MM-IM stock & WM stock in one report.Pls let me know how it is possible.
Thanks,
AC

Hi
Can you explain with more details?
Both servers are SAP or third part Warehouse?
If it is SAP you can not implement WM without IM.
you have standard report available to compare IM&WM and also you can switch between IM&WM stocks
[http://help.sap.com/saphelp_470/helpdata/en/c6/f83c484afa11d182b90000e829fbfe/content.htm]
Karthik

Similar Messages

Stock Transfer Order Report

Hi,
How to develop a Stock Transfer Order report. I also want to track the cost of transfer from one plant to another. Plz help.

Hi,
First fetch the data from LTAK header table. Based on this table you can
get the line items from LTAP table. You can have the list of all open TO's in this table. Based on the Plant (Werks) you can fetch the data from EKPO for STO report.
Reward if useful.....

MAP and Total stock in 1 report

Hi,
For one of the reporting requirement i need to show Moving average Price & Total stock in single report. MAP is saved in cube 0COPC_C04 and Stock in cube 0IC_C03.
So i created a multiprovider on them. My report layout is bel;ow
Material   Plant   Storage location MAP total stock
Issue is that MAP is stored only at MAterial level and Plant level but not at storage location level.
and stock is at all level.
I am getting output like this:
Material   Plant   Storage location MAP total stock
MAT1      PL1    #                          10     -
MAT1      PL1     ST1                     -       20
MAT1      PL1     ST1                     -       30
User wants that MAP is same at different storage locations in a plant so MAP value should be repeated even if its same.
MAT1   PL1    #        10 -
MAT1   PL1     ST1   10    20
MAT1   PL1     ST1   10    30
How can i achieve the same....
Thanks
Dipika

You could create a characteristic hierarchy with Plant as the parent node of storage location.
Or create a structure in the query and define a cell restriction to keep the Plant MAP value against the Storage Location cells.

Reports:- Stock,Priod Wise Report, Stock value, Storage Location, WBS Repor

Dear All,
Needed some of the Reports in MM Material Mangment
1. Stock Report Value Wise
2. Stock Report Period Wise
3. Stock Report Storage Location wise
4. Stock Report WBS wise
5 . Stock Value
Can I get all my requirement in One Report; or Individually also is fine. Please Do

Check MC.9
It will be helpful. you an drill down the report as per your need.
Regards,
S Anand

One report or three reports?

Hi guys,
I have three reports in SAP BW (im using SAP BI 7.0):
1) Credit Management
2) Sales
3) Profit Center
Each report has it´s own view, data source and infocube.
So for example the customer number, company code are the same.
The key figures are the same (like sales or turn over).
In addition to report 1) the 2) sales report has added characteristics like salesorganisation, the 3) has profit center.
No I´m wondering if it is possible to make just one report with all characteristics in one query?
Should I create one DSO with all fields?
Is it possible to create one DSO which has access to each view and assambles the existing fields in one single DSO?
Or would it be to much chaos if there are many characteristics?
Thanks in advance

I didn´t understand completely and wasn´t able to try to build one single cube (not a multi cube) out of three DSO.
In my case I have the following situation for example three cubes and each cube has his own DSO with the same structure.
My goal is to have only one cube with all characteristics in it so that I don´t have to use the reports.
This is how the cubes exist in current version (three cubes and three DSO).
========
Cube 1:
========
Characteristics:
0Cal_Month
0C_CTR_AREA
0Company_Code
0Customer
Keyfigures:
Turn over
Payments
Open items
========
Cube 2:
========
Characteristics:
0Cal_Month
0C_CTR_AREA
0Company_Code
0Customer
0Salesorg
0Distr_Chain
0Division
Keyfigures:
Turn over
Payments
Open items
========
Cube 3:
========
Characteristics:
0Cal_Month
0C_CTR_AREA
0Company_Code
0Customer
0Profit_CTR
Keyfigures:
Turn over
Payments
Open items
=========================
Solution scenario for Cube 4:
=========================
I thought about this creating a new cube.
Characteristics:
0Cal_Month
0C_CTR_AREA
0Company_Code
0Customer
0Salesorg
0Distr_Chain
0Division
0Profit_CTR
Keyfigures:
Turn over
Payments
Open items
===================
Than I shoul be able to select within a selection mask for example turn over for a specifi sales division and profit center in the specific month.
Am I right?
To achieve that I have to map every single DSO field with the new cube 4.
That means
"DSO Sales" 0Customer field with field 0Customer in cube 4,
"DSO Profit Center" 0Customer field with field 0Customer in cube 4 and
"DSO Finance" 0Customer field with field 0Customer in cube 4
and so on.
Am I right?
Thank you for answering!

I am getting dump error while running one report in one select query

Hi,
While running a report program, I am getting a dump error in one select query. So could you please correct the select query so that I can't face the dump error.
SELECT vbeln parvw kunnr INTO CORRESPONDING FIELDS OF TABLE l_t_vbpa
FROM vbpa
FOR ALL ENTRIES IN l_t_backorder_item
WHERE vbeln = l_t_backorder_item-vbeln AND
( ( parvw = c_we AND kunnr IN rng_shipto ) OR ( parvw = c_ag AND
kunnr IN rng_soldto ) ) .
<removed by moderator>
Best Regards,
BDP
Edited by: Thomas Zloch on Apr 30, 2010 12:31 PM

Hi Bansidhar,
It would be helpful if you could tell what type of dump it is.
If it is a timeout you should check whether l_t_backorder_item is empty - in this case ALL document numbers are selected. f you get the timeout with a populated table consider converting the l_t_backorder_item table into one ore more ranges tables - the select with ranges tables is way quicker than 'for all entries'. But take care the ranges table has not to many entries - the SAP SQL converter puts this into one huge SQL statement and this might become too big to be handled by the database (depends on the actual underlying database).
I would also consider splitting the SELECT into two (2nd one with 'appending into table') to make the code easier to understand It also helps the database system determining a strategy for the select.
Regards,
Gerd Rother

*Maximum report in one report group (report painter)*

Hi SAP Experts,
I'm doing some job on report painter, issue on this is the number of reports in one report group,because in my case I can only insert 7 reports in one report group. Is there any possible way to extend the maximum report allowed in one report group? I'm new in our SAP group & this is my first time to do job in report painter . .
Help from you experts would be highly appreciated. .
Thanks. .God Bless. .

Hi Krishma,
You can save this workbook to your PC and email it to your user. They need to open the workbook (with Bex running in Excel). When they click the refresh button they system will prompt them to log on (if they are already not logged in) and then the queries will be executed.
Hope this helps...

Stock in warehouse report - value not displayed.

In the "Stock in warehouse report" I selected this option: Price source = Last purchase price.
In the report, for an item, the value in the field "Item Price" is not displayed.
This item has a good receipt (with value) in this year.
Why the value is not displayed?
Thanks
Paolo

Paolo...
1. Did that receipt get paid for with an AP Invoice (when last purchase price is updated)?
and
2. Did you run an Inventory Audit Report before running the Inventory in Warehouse Report?
To see this maybe you can go into SAP OEC DEMO and create a new item, then create a PO - run the two reports, copy to Goods Receipt PO - run the two reports, and then copy to AP Invoice - run the two reports. You will see the difference.
Accounting point - an item is not really valued until the AP Invoice is processed. Only then do you know what the actual purchase cost is for a product.
Regards - Zal

Stock in Warehouse Report - Printing Warehouse Name

Hi all,
My client is printing the Stock in Warehouse Report and wants to pull in the warehouse name in the report.
They are only ever generating this report for 1 warehouse.
When I look at the standard template I cannot see how even the waerehouse code is pulled in to the report.
The only fields I see are text fields.
I have tried adding a database field related to or linked to another field but I cant seem to get it to work.
Any advice greatly appreciated.
Thanks,

I believe you are talking about Inventory in Warehouse Report
Try the following:
Add a Formula field and check
Field_045 == "Whse:"
Add a database field as you seem to have done and select the Warehouse Name from the OWHS table and set the
Link to: on the above formula field and
Relate to on Field_046 ...................................this field is the Item Description field where the Warehouse Code is displayed
Check this out.
OR
If it only one warehouse Add a text field and hardcode the Warehouse Name

Tables used for a Stock-In-Hand Report ?

Hi,
I need to generate a stock in hand report. For this report I only need to consider Purchasing Inventory Stock and not the Sales Order Stock. What tables do I have to use?, if possible the query!
Thanks,
Kishan

Hi Kishan,
Try and use FM 'BAPI_MATERIAL_AVAILABILITY'. I have used this FM in the past for Stock on Hand reports. Only drawback is that it only runs for one material / plant at a time!
You cold also use FM 'AVAILABILITY_CHECK':
Structure to hold ATP Controller: Control Parameters
DATA: BEGIN OF st_atpca.
          INCLUDE STRUCTURE atpca.
DATA: END OF st_atpca.
Table to hold ATP: Requirements to be Checked/Considered
DATA: BEGIN OF tbl_atpcs OCCURS 0.
          INCLUDE STRUCTURE atpcs.
DATA: END OF tbl_atpcs.
Table to hold ATP Server: ATP data for display
DATA: BEGIN OF tbl_atpds OCCURS 0.
          INCLUDE STRUCTURE atpds.
DATA: END OF tbl_atpds.
Table to hold ATP Server: Material Table
DATA: BEGIN OF tbl_atpmat OCCURS 0.
          INCLUDE STRUCTURE atpmat.
DATA: END OF tbl_atpmat.
Populate ST_ATPCA
CLEAR st_atpca.
st_atpca-anwdg = '8'.    "Calling App - Explaination
st_atpca-azerg = 'T'.    "ATP Display Result
st_atpca-rdmod = 'A'.    "Read Mode - Totals
st_atpca-xenqmd = 'N'.    "Do not read Blocks
Populate TBL_ATPCS
CLEAR tbl_atpcs.
REFRESH tbl_atpcs.
tbl_atpcs-matnr = p_matnr. "Material
tbl_atpcs-werks = p_werks. "Plant
tbl_atpcs-prreg = 'A'.      "Checking Rule for Avail Check
tbl_atpcs-chmod = 'EXP'.    "ATP: Check mode
tbl_atpcs-delkz = 'VC'.     "MRP element indicator
tbl_atpcs-bdter = sy-datum. "Requirements date for the component
tbl_atpcs-xline = '1'.
tbl_atpcs-trtyp = 'A'.      "Transaction type - Display
tbl_atpcs-idxatp = '1'.
tbl_atpcs-resmd = 'X'.      "Mode for Results of Check - Proposal
tbl_atpcs-chkflg = 'X'.
APPEND tbl_atpcs.
CALL FUNCTION 'AVAILABILITY_CHECK'
       TABLES
            p_atpcsx = tbl_atpcs
            p_atpdsx = tbl_atpds
            p_atpmatx = tbl_atpmat
       CHANGING
            p_atpca   = st_atpca
       EXCEPTIONS
            error     = 1
            OTHERS    = 2.
Would recommend giving both these FM's a go and see if they have what you want.
Cheers,
Pat.
PS. If you find these suggestions helpful, kindly award Reward Points appropriately.

Exporting to multiple PDF's from one report

I have a requirement to create multiple PDF's from one report.
My thought is that I can I can create a foreach loop that cycles through one of my groups. I would then like to have each file have the name of that group.
If anyone could help me on how to code this in C# that would be great. I need to know where I should be putting this code (program.cs or crystalreport.cs) and how I run it. I am assuming I don't need the viewer for this function, since this is all on my end and no users need to have access to it.
My other requirement is to have each of these reports be put into their own folders at C:\. Thanks for the help in advance!

OK. Yup, you should be able to do this. When I was reading the initial post it looked like you might have ben wanting to export only a certain section of a report (which is a no go).
Anyhow, first thing you want to do is apply Service pack 3:
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
Next, you want to look at a few sample apps and go over some docs. What you want to achieve can be done by using parameters or selection formulas.
A good coding resources is the [Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]. Don't worry about the title, it will apply to CR 2008 also.
Next, sample apps can be downloaded from here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
[CR 2008 developer library|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm]
[API reference|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_apiRef_12_en.chm]
Not sure if you are thinking of this being a web app, but here are some resources for that:
[Interactivity and Reports in Web Applications|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/208edbbf-671e-2b10-d7b5-9b57a832e427&overridelayout=true]
Before starting your project, you should have a look at [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7] to make sure you are using the right SDK for your purposes.
Finally, the following are links to 3rd party resources and I'm adding htese just as an FYI:
http://www.emoreau.com/Entries/Articles/2006/09/Feeding-Crystal-Reports-from-your-application.aspx
http://msdn.microsoft.com/en-us/magazine/cc301570.aspx
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Getting two selection screen in one report

Hello Friends,
I am Making report, In my report on first screen i have given two pushbutton, like this :
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS : p1_but RADIOBUTTON GROUP g1,
p2_but RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b2.
now i want when user click on any one pushbutton it shows another selection screen, whose select options are:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: so_erdat FOR lf_date,
so_vbeln FOR lf_vbeln MATCHCODE OBJECT zvbeln..
SELECTION-SCREEN END OF BLOCK b1.
Please guide me can i use two selection screen in one report?, If yes then how can I use? Please revert back me as soon as possible.........

Hi,
you can achieve it only by using two USER_DEFINE_SELECTION SCREEN.
For detail check the link
http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dba83d35c111d1829f0000e829fbfe/content.htm
Regards,
anirban

Consolidating queries / reports in one report

Hi guys,
I have three reports in SAP BW (im using SAP BI 7.0):
1) Credit Management
2) Sales
3) Profit Center
Each report has it´s own view, data source and infocube.
So for example the customer number, company code are the same.
The key figures are the same (like sales or turn over).
In addition to report 1) the 2) sales report has added characteristics like salesorganisation, the 3) has profit center.
No I´m wondering if it is possible to make just one report with all characteristics in one query?
Should I create one DSO with all fields?
Is it possible to create one DSO which has access to each view and assambles the existing fields in one single DSO?
Or would it be to much chaos if there are many characteristics?
Thanks in advance

I didn´t understand completely and wasn´t able to try to build one single cube (not a multi cube) out of three DSO.
In my case I have the following situation for example three cubes and each cube has his own DSO with the same structure.
My goal is to have only one cube with all characteristics in it so that I don´t have to use the reports.
This is how the cubes exist in current version (three cubes and three DSO).
========
Cube 1:
========
Characteristics:
0Cal_Month
0C_CTR_AREA
0Company_Code
0Customer
Keyfigures:
Turn over
Payments
Open items
========
Cube 2:
========
Characteristics:
0Cal_Month
0C_CTR_AREA
0Company_Code
0Customer
0Salesorg
0Distr_Chain
0Division
Keyfigures:
Turn over
Payments
Open items
========
Cube 3:
========
Characteristics:
0Cal_Month
0C_CTR_AREA
0Company_Code
0Customer
0Profit_CTR
Keyfigures:
Turn over
Payments
Open items
=========================
Solution scenario for Cube 4:
=========================
I thought about this creating a new cube.
Characteristics:
0Cal_Month
0C_CTR_AREA
0Company_Code
0Customer
0Salesorg
0Distr_Chain
0Division
0Profit_CTR
Keyfigures:
Turn over
Payments
Open items
===================
Than I shoul be able to select within a selection mask for example turn over for a specifi sales division and profit center in the specific month.
Am I right?
To achieve that I have to map every single DSO field with the new cube 4.
That means
"DSO Sales" 0Customer field with field 0Customer in cube 4,
"DSO Profit Center" 0Customer field with field 0Customer in cube 4 and
"DSO Finance" 0Customer field with field 0Customer in cube 4
and so on.
Am I right?
Thank you for answering!
Edited by: saplaz on May 8, 2011 2:51 PM
Edited by: saplaz on May 9, 2011 1:41 PM
Edited by: saplaz on May 10, 2011 8:35 AM

Creating 2 different WEBI report in One report

Hi,
Can we create 2 different report in one report and some how direct the queries associated with these report individually so that i get value specific to that report only.
Edited by: ashok119 on Sep 29, 2010 11:36 AM

Version of BO, not matters.
Per my understanding, You have:
1 Universe and 10 Queries. Based these you have 2 Reports.
Report1: Data is populating from 5 Queries.
Report2: Data is populationg from another 5 queries.
-->> Do you have any Filters at query for Report2 queries??
--->> Check @ report, do you have Report level filters, you can se them by clicking on Report Filter icon (Left-most icon in formula toolbar) and see there anty filtering is there??
Still if you are getting any data, check the same at backend level(Datasource level - RDBMS/SAP). If you can see data at backend, try to create new Report(Report2) based on the req. Here you should get data.
What is the Datasource??
Thank You!!

Calling one report program from another

Hi All,
i am calling one report program from my program & exporting it's output to SAP-SPOOL using SUBMIT statement. I want to fetch the spool no in my program for this spool. Please guide me how this can be achieved? i have tried SYST- SPONO but it's not working.
Thanks & Regards,
Chetan.

Hi,
Initially check this it might be helpful to u.
http://help.sap.com/saphelp_sm40/helpdata/en/30/cc154219fce12ce10000000a1550b0/content.htm.
Even use the function module slike Job_open , Job_close this is also one of the methid to achive spool requests.
Regards,
Sana.
Reward with points if found helpful..

SAP MM-IM & WM stock in one report

Similar Messages

Maybe you are looking for