SAP NCO 3 (Patch 3) - Problems with USE_SAPGUI and Function Module

Hello,
We are moving our code to use the new SAP .NET v3 connector and have run into a slight issue which works on v2 but doesn't seem to work the same way in v3.
We are calling a function module in SAP that will invoke the SAP GUI allow the user to interact with it. Once the user has completed their interaction and clicked the last button, the SAP GUI is meant to disappear. With v3 this is no longer the case.
We are forcing the USE_SAPGUI value to 2 but this has no effect on the problem.
In V3, the last dialog box stays on the screen and control returns to our application. The dialog box is not active anymore and cannot be clicked. It seems the SAP GUI will stay open with this frozen dialog box until we invoke another RFC that brings up the SAP GUI.
My questions are:
1) Is this a bug or is there something more I need to do to achieve this functionality?
2) Is there anyway to forcibly close the SAP GUI connection for a RFCDestination? The connection is closed when we close our application but I can't find a way to close all connections which would hopefully close the dialog box.
Thanks in advance for any help on this matter.
Thanks,
Tim

I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
Or maybe it's missing a lib (you may need to install 32bit versions):
ldd /path/to/eurotrucks
to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
Have a good look though: https://wiki.archlinux.org/index.php/Steam
and remember to check for missing 32bit libs.

Similar Messages

Problem with Remotely Invoked Function Module

Hi All,
I have a requirement to develop a Remote Enabled Function Module in SAP R/3 which will be invoked from an XI environment via an XML message.
The purpose of this FM is to validate the incoming data(which comes as a pair of values) by comparing it with values in a corresponding SAP Table.
If the incoming data is consistent with the values in the SAP Table, i need to return the data in the same format as it is passed. If any inconsistent record is encountered, then i just need to delete that particular record and return the rest of them.
I used a TABLE for the Input/Output in the FM and tried it. Though it works fine stand-alone, when invoked from the XI environment, the calling system is able to receive only the name of the Table Structure that is used in the FM for I/O.
I am unable to comprehend the format the input comes into SAP when the FM is invoked. So I'm not able to exactly pin-point the place where the problem arises.
Please suggest a solution.
Any pointers in this regard will be helpful.
Thanks in Advance.

Hi,
You can view the incoming message in the local XI Message Monitor SXMB_MONI. There you will see if the input table parameter is correctly filled. In the same transaction, you can also see the reply that is sent to XI. If that is OK, you know that your function works correctly. When you are sure of that, and the calling system does not get the same parameters returned as you could see, that means the mapping in XI is wrong.
good luck,
Peter Glas

Problem with Remote Invoked Function Module

Hi All,
I have a requirement to develop a Remote Enabled Function Module in SAP R/3 which will be invoked from an XI environment via an XML message.
The purpose of this FM is to validate the incoming data(which comes as a pair of values) by comparing it with values in a corresponding SAP Table.
If the incoming data is consistent with the values in the SAP Table, i need to return the data in the same format as it is passed. If any inconsistent record is encountered, then i just need to delete that particular record and return the rest of them.
I used a TABLE for the Input/Output in the FM and tried it. Though it works fine stand-alone, when invoked from the XI environment, the calling system is able to receive only the name of the Table Structure that is used in the FM for I/O.
I am unable to comprehend the format the input comes into SAP when the FM is invoked. So I'm not able to exactly pin-point the place where the problem arises.
Please suggest a solution.
Any pointers in this regard will be helpful.
Thanks in Advance.

Hi Keerthivasan,
My requirement also same,
please send me the source code.Please help me urgent.
Thanks.

Problem with Time stamp function module for converting US to Japan

Hi All,
I need standard function module for converting US Timestamp to Japan, Can any one let me know is there any standard function modules.
thanks in advance!
Regards,
Kalidas.T
Edited by: Kalidas Thirumoorthy on May 5, 2009 5:29 PM
Edited by: Kalidas Thirumoorthy on May 5, 2009 5:30 PM
Edited by: Kalidas Thirumoorthy on May 5, 2009 5:30 PM

Try this way:
CONVERT TIME STAMP <tst> TIME ZONE <tz> INTO DATE <d> TIME <t>.
CONVERT DATE <d> TIME <t> INTO TIME STAMP <tst> TIME ZONE <tz>.
<tst> is of type P(8) or P(11) with 7 decimal places
<tz> of type C(6)
Refer to help.sap.com for more details.

Problem with IDOC inbound function module

hi
   While excecuting the inbound function module in WE19
I am getting error (short dump)
Incorrect parameter with Call transaction.

Creating a Function Module (Direct Inbound Processing)
This step describes how to create a function module which is identified by the IDoc Interface using a new process code and called from ALE (field TBD52-FUNCNAME). Direct inbound processing using a function module (not using a workflow) always includes the ALE layer. This setting (processing with function module and ALE layer) is identified by the value 6 in the field TEDE2-EDIVRS, which is read by the function module IDOC_START_INBOUND. IDOC_START_INBOUND then calls ALE.
Prerequisites
You must have completed the required steps in Defining and Using a Basic Type .
Procedure
Choose Tools ® ABAP Workbench ® Development ® Function Builder, and create a new function module.
Create the segments as global data in your function group. The function module should copy the application data from the segments into the corresponding application tables and modify the IDoc status accordingly. If an error occurs, the function module must set the corresponding workflow parameters for exception handling.
Activate the function module: From the initial screen of the Function Builder select .
In the example, create the function module IDOC_INPUT_TESTER with a global interface. The function module is called when an IDoc of type TESTER01 is received for inbound processing. You will assign an application object ("standard order") to this IDoc type and therefore maintain tables from SD. To do this, call transaction VA01 using the command CALL TRANSACTION. Please note that the intention here is not to simulate a realistic standard order, but only to illustrate how data reaches application tables from an IDoc table via segment structures (form routine READ_IDOC_TESTER) and how the function module triggers an event for exception handling (by returning suitable return variables to the ALE layer in the FORM routine RETURN_VARIABLES_FILL).
A comprehensive example of the code for an inbound function module is provided in the ALE documentation in the SAP Library under Example Program to Generate an IDoc. This function module, for example, also checks whether the logical message is correct and calls a (fictitious) second function module which first writes the application data and then returns the number of the generated document. In addition, status 53 is only set if the application document was posted correctly.
Administration parameters for IDOC_INPUT_TESTER
Application abbreviation
V (Sales and Distribution)
Processing type
Normal, start immediately
Interface for IDOC_INPUT_TESTER (global interface)
Formal parameters
Reference structure
Explanation
Import parameters
INPUT_METHOD
BDWFAP_PAR-INPUTMETHD
Describes how the function module is to be processed (example: in the background)
MASS_PROCESSING
BDWFAP_PAR-MASS_PROC
Mass inbound processing? (indicator)
Export parameters
WORKFLOW_RESULT
BDWFAP_PAR-RESULT
Set to 99999 if an event is to be triggered for error handling.
APPLICATION_VARIABLE
BDWFAP_PAR-APPL_VAR
Variable freely available from application for workflow
IN_UPDATE_TASK
BDWFAP_PAR-UPDATETASK
Asynchronous update? (indicator is not set in example)
CALL_TRANSACTION_DONE
BDWFAP_PAR-CALLTRANS
Transaction called? (indicator is not set in example)
Table
IDOC_CONTRL
EDIDC
IDoc control record
IDOC_DATA
EDIDD
IDoc data records
IDOC_STATUS
BDIDOCSTAT
IDoc status records for ALE
RETURN_VARIABLES
BDWFRETVAR
IDoc assigned to Object type method parameters.
SERIALIZATION_INFO
BDI_SER
If several IDocs are to be processed in a certain sequence: this structure contains the necessary information
Example
FUNCTION IDOC_INPUT_TESTER.
""Globale Schnittstelle:
*"       IMPORTING
*"             VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*"             VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*"       EXPORTING
*"             VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*"             VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*"             VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*"             VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*"       TABLES
*"              IDOC_CONTRL STRUCTURE EDIDC OPTIONAL
*"              IDOC_DATA STRUCTURE EDIDD
*"              IDOC_STATUS STRUCTURE BDIDOCSTAT
*"              RETURN_VARIABLES STRUCTURE BDWFRETVAR
*"              SERIALIZATION_INFO STRUCTURE BDI_SER
initialize SET/GET Parameter and internal tables
PERFORM INITIALIZE_ORGANIZATIONAL_DATA.
Move IDOC to internal tables of application
PERFORM READ_IDOC_TESTER.
call transaction Order Entry VA01
PERFORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
set status value
perform write_status_record using errorcode.
return values of function module
PERFORM RETURN_VARIABLES_FILL USING ERRORCODE.
ENDFUNCTION.
FORM INITIALIZE_ORGANIZATIONAL_DATA.
initialize SET/GET parameters
   SET PARAMETER ID 'VKO' FIELD SPACE.
   SET PARAMETER ID 'VTW' FIELD SPACE.
   SET PARAMETER ID 'SPA' FIELD SPACE.
   SET PARAMETER ID 'VKB' FIELD SPACE.
   SET PARAMETER ID 'VKG' FIELD SPACE.
initialize internal tables
   REFRESH BDCDATA.
   CLEAR BDCDATA.
   CLEAR BELEGNUMMER.
   CLEAR ERRTAB.
   REFRESH ERRTAB.
   REFRESH XBDCMSGCOLL.
   CLEAR XBDCMSGCOLL.
ENDFORM.                    " INITIALIZE_ORGANIZATIONAL_DATA
FORM READ_IDOC_TESTER.
PERFORM INITIALIZE_IDOC.
LOOP AT IDOC_DATA
   WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
    CASE IDOC_DATA-SEGNAM.
header data
      WHEN 'E1HEAD'.
        MOVE IDOC_DATA-SDATA TO E1HEAD.
        PERFORM PROCESS_SEGMENT_E1HEAD.
position data
      WHEN 'E1ITEM'.
        MOVE IDOC_DATA-SDATA TO E1ITEM.
        PERFORM PROCESS_SEGMENT_E1ITEM.
    ENDCASE.
ENDLOOP.
only when there were one or more items
CHECK FIRST NE 'X'.
APPEND XVBAP.                        "last one
ENDFORM.                    " READ_IDOC_TESTER
FORM INITIALIZE_IDOC.
CLEAR XVBAK.
REFRESH XVBAP.
CLEAR XVBAP.
POSNR = 0.
FIRST = 'X'.
ENDFORM.                    " INITIALIZE_IDOC
FORM PROCESS_SEGMENT_E1HEAD.
requested date of delivery
WLDAT = E1HEAD-WLDAT.
delivery date
XVBAK-BSTDK = E1HEAD-BSTDK.
customer number
XVBAK-KUNNR = E1HEAD-AUGEB.
order number
XVBAK-BSTNK = E1HEAD-BELNR.
division
XVBAK-SPART = E1HEAD-SPART.
distribution channel
XVBAK-VTWEG = E1HEAD-VTWEG.
sales organization
XVBAK-VKORG = E1HEAD-VKORG.
order type
XVBAK-AUART = E1HEAD-AUART.
do not fill incoterms (inco1, inco2)
customer function
CALL CUSTOMER-FUNCTION '001'
       EXPORTING
            PI_VBAK621           = XVBAK
       IMPORTING
            PE_VBAK621           = XVBAK
       TABLES
            PT_IDOC_DATA_RECORDS = IDOC_DATA.
ENDFORM.                    " PROCESS_SEGMENT_E1HEAD
FORM PROCESS_SEGMENT_E1ITEM.
position number
XVBAP-POSNR = XVBAP-POSNR + 1.
amount
XVBAP-WMENG = E1ITEM-MENGE.
unit
CALL FUNCTION 'ISO_TO_SAP_MEASURE_UNIT_CODE'
       EXPORTING
            ISO_CODE = E1ITEM-BMEINH
       IMPORTING
            SAP_CODE = XVBAP-VRKME
       EXCEPTIONS
            OTHERS    = 0.
material number
XVBAP-MATNR = E1ITEM-LMATNR.
CALL CUSTOMER-FUNCTION '002'
       EXPORTING
            PI_VBAP621           = XVBAP
       IMPORTING
            PE_VBAP621           = XVBAP
       TABLES
            PT_IDOC_DATA_RECORDS = IDOC_DATA.
APPEND XVBAP.
ENDFORM.                    " PROCESS_SEGMENT_E1ITEM
FORM CALL_VA01_IDOC_ORDERS USING ERRORCODE.
call transaction first dynpro
PERFORM DYNPRO_START.
call transaction double-line entry
PERFORM DYNPRO_DETAIL2.
incoterms
PERFORM DYNPRO_HEAD_300.
call transaction item datas
PERFORM DYNPRO_POSITION.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'SICH'.
determine input method
IF INPUT_METHOD IS INITIAL.
    INPUT_METHOD = 'N'.
ENDIF.
call transaction VA01
CALL TRANSACTION 'VA01' USING    BDCDATA
                         MODE     INPUT_METHOD
                         UPDATE   'S'
                         MESSAGES INTO XBDCMSGCOLL.
errorcode = SY-SUBRC.       " remember returncode for status update
ENDFORM.                    " CALL_VA01_IDOC_ORDERS
form write_status_record using errorcode.
FILL IDOC_STATUS
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IF ERRORCODE = 0.
IDOC_STATUS-STATUS = BELEG_GEBUCHT. "value 53
   GET PARAMETER ID 'AUN' FIELD BELEGNUMMER.
   IDOC_STATUS-MSGID = 'V1'.
   IDOC_STATUS-MSGNO = '311'.
   IDOC_STATUS-MSGV1 = 'Terminauftrag'.
   IDOC_STATUS-MSGV2 = BELEGNUMMER.
ELSE.
    IDOC_STATUS-STATUS = BELEG_NICHT_GEBUCHT. "value 51
    IDOC_STATUS-MSGID = SY-MSwGID.
    IDOC_STATUS-MSGNO = SY-MSGNO.
    IDOC_STATUS-MSGV1 = SY-MSGV1.
    IDOC_STATUS-MSGV2 = SY-MSGV2.
    IDOC_STATUS-MSGV3 = SY-MSGV3.
    IDOC_STATUS-MSGV4 = SY-MSGV4.
ENDIF.
APPEND IDOC_STATUS.
ENDFORM.
FORM DYNPRO_START.
PERFORM DYNPRO_NEW USING PROGRAMM_AUFTRAG
                           DYNPRO-EINSTIEG
                  CHANGING LAST_DYNPRO.
ordertype
PERFORM DYNPRO_SET USING 'VBAK-AUART' XVBAK-AUART.
sales organization
PERFORM DYNPRO_SET USING 'VBAK-VKORG' XVBAK-VKORG.
Distribution channel
PERFORM DYNPRO_SET USING 'VBAK-VTWEG' XVBAK-VTWEG.
Division
PERFORM DYNPRO_SET USING 'VBAK-SPART' XVBAK-SPART.
Sales office
PERFORM DYNPRO_SET USING 'VBAK-VKBUR' XVBAK-VKBUR.
Sales group
PERFORM DYNPRO_SET USING 'VBAK-VKGRP' XVBAK-VKGRP.
ENDFORM.                    " DYNPRO_START
FORM DYNPRO_NEW USING    PROGNAME
                         DYNPRONR
                CHANGING LAST_DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGNAME.
BDCDATA-DYNPRO = DYNPRONR.
BDCDATA-DYNBEGIN   = 'X'.
APPEND BDCDATA.
LAST_DYNPRO = DYNPRONR.
ENDFORM.                    " DYNPRO_NEW
FORM DYNPRO_SET USING    FELDNAME
                         FELDINHALT.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
dynpro field name
BDCDATA-FNAM = FELDNAME.
contents
BDCDATA-FVAL = FELDINHALT.
APPEND BDCDATA.
ENDFORM.                    " DYNPRO_SET
FORM DYNPRO_DETAIL2.
okcode
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-UER2.
fix dynpro number 4001
PERFORM DYNPRO_NEW USING    PROGRAMM_AUFTRAG
                               '4001'
                      CHANGING LAST_DYNPRO.
order party
PERFORM DYNPRO_SET      USING 'KUAGV-KUNNR' XVBAK-KUNNR.
purchase order number
PERFORM DYNPRO_SET      USING 'VBKD-BSTKD'   XVBAK-BSTNK.
requested delivery date
PERFORM DYNPRO_DATE_SET USING 'VBKD-BSTDK'   XVBAK-BSTDK.
purchase order date
PERFORM DYNPRO_DATE_SET USING 'RV45A-KETDAT' WLDAT.
ENDFORM.                    " DYNPRO_DETAIL2
FORM DYNPRO_DATE_SET USING    FELDNAME
                              FELDINHALT.
DATA: DATE TYPE D.
CLEAR BDCDATA.
CHECK FELDINHALT NE SPACE.
BDCDATA-FNAM = FELDNAME.
WRITE FELDINHALT TO DATE.
BDCDATA-FVAL = DATE.
APPEND BDCDATA.
ENDFORM.                    " DYNPRO_DATE_SET
FORM DYNPRO_HEAD_300.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' PANEL-KKAU.
incoterms part 1
IF NOT XVBAK-INCO1 IS INITIAL.
   PERFORM DYNPRO_SET USING 'VBKD-INCO1' XVBAK-INCO1.
ENDIF.
incoterms part 2
IF NOT XVBAK-INCO2 IS INITIAL.
   PERFORM DYNPRO_SET USING 'VBKD-INCO2' XVBAK-INCO2.
ENDIF.
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'BACK'.
ENDFORM.                    " DYNPRO_HEAD_300
FORM DYNPRO_POSITION.
LOOP AT XVBAP.
dynpro item double line entry
PERFORM DYNPRO_SET USING 'BDC_OKCODE' 'UER2'.
    IF XVBAP-POSNR = 1.
material number
      PERFORM DYNPRO_SET      USING 'VBAP-MATNR(01)'   XVBAP-MATNR.
order quantity
      PERFORM DYNPRO_SET      USING 'RV45A-KWMENG(01)' XVBAP-WMENG.
desired delivery date
      PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(1)' WLDAT.
sales unit
      PERFORM DYNPRO_SET      USING 'VBAP-VRKME(1)'   XVBAP-VRKME.
    ELSE.
     PERFORM DYNPRO_SET      USING 'BDC_OKCODE'      'POAN'.
material number
      PERFORM DYNPRO_SET      USING 'VBAP-MATNR(02)'    XVBAP-MATNR.
order quantity
      PERFORM DYNPRO_SET      USING 'RV45A-KWMENG(02)' XVBAP-WMENG.
desired delivery date
      PERFORM DYNPRO_DATE_SET USING 'RV45A-ETDAT(02)'   WLDAT.
sales unit
      PERFORM DYNPRO_SET      USING 'VBAP-VRKME(02)'    XVBAP-VRKME.
    ENDIF.
ENDLOOP.
ENDFORM.                    " DYNPRO_POSITION
FORM RETURN_VARIABLES_FILL USING ERRORCODE.
allocate IDOC numbers to Workflow output parameters
IF MASS_PROCESSING <> SPACE.
    IF ERRORCODE = 0.
      RETURN_VARIABLES-WF_PARAM = PID.
      RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
      APPEND RETURN_VARIABLES.
      RETURN_VARIABLES-WF_PARAM = APO.
      RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_OK.
    ELSE.
      RETURN_VARIABLES-WF_PARAM = EID.
      RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_ERROR.
    ENDIF.
ELSE.
    IF ERRORCODE = 0.
      RETURN_VARIABLES-WF_PARAM = APE.
      RETURN_VARIABLES-DOC_NUMBER = BELEGNUMMER.
      APPEND RETURN_VARIABLES.
      WORKFLOW_RESULT = C_WF_RESULT_OK.
    ELSE.
      WORKFLOW_RESULT = C_WF_RESULT_ERROR.
    ENDIF.
ENDIF.
ENDFORM.                    " RETURN_VARIABLES_FILL
Globale Daten von IDOC_INPUT_TESTER
TABLES: E1HEAD, E1ITEM.
DATA: BEGIN OF BDCDATA OCCURS 500.
        INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF XVBAK.                 "Kopfdaten
     INCLUDE STRUCTURE VBAK621.
DATA: END OF XVBAK.
DATA: BEGIN OF XVBAP OCCURS 50.        "Position
       INCLUDE STRUCTURE VBAP.
DATA: WMENG(18) TYPE C.
DATA: LFDAT LIKE VBAP-ABDAT.
DATA: KSCHL LIKE KOMV-KSCHL.
DATA: KBTRG(16) TYPE C.
DATA: KSCHL_NETWR LIKE KOMV-KSCHL.
DATA: KBTRG_NETWR(16) TYPE C.
DATA: INCO1 LIKE VBKD-INCO1.
DATA: INCO2 LIKE VBKD-INCO2.
DATA: YANTLF(1) TYPE C.
DATA: PRSDT LIKE VBKD-PRSDT.
DATA: HPRSFD LIKE TVAP-PRSFD.
DATA: END OF XVBAP.
DATA: BEGIN OF DYNPRO,
      EINSTIEG          LIKE T185V-DYNNR VALUE 101,
      KKAU              LIKE T185V-DYNNR,
      UER2              LIKE T185V-DYNNR,
      KBES              LIKE T185V-DYNNR,
      ERF1              LIKE T185V-DYNNR,
      PBES              LIKE T185V-DYNNR,
      PKAU              LIKE T185V-DYNNR,
      PEIN              LIKE T185V-DYNNR,
      EID1              LIKE T185V-DYNNR,
      POPO              LIKE T185V-DYNNR,
      EIPO              LIKE T185V-DYNNR,
      KPAR              LIKE T185V-DYNNR,
      PSDE              LIKE T185V-DYNNR,
      PPAR              LIKE T185V-DYNNR,
      KDE1              LIKE T185V-DYNNR,
      KDE2              LIKE T185V-DYNNR,
      PDE1              LIKE T185V-DYNNR,
      PDE2              LIKE T185V-DYNNR,
      PKON              LIKE T185V-DYNNR,
      END OF DYNPRO.
DATA: BEGIN OF PANEL,
      KKAU              LIKE T185V-PANEL VALUE 'KKAU',
      UER2              LIKE T185V-PANEL VALUE 'UER2',
      KBES              LIKE T185V-PANEL VALUE 'KBES',
      ERF1              LIKE T185V-PANEL VALUE 'ERF1',
      PBES              LIKE T185V-PANEL VALUE 'PBES',
      PKAU              LIKE T185V-PANEL VALUE 'PKAU',
      PEIN              LIKE T185V-PANEL VALUE 'PEIN',
      EID1              LIKE T185V-PANEL VALUE 'EID1',
      EIAN              LIKE T185V-PANEL VALUE 'EIAN',
      POPO              LIKE T185V-PANEL VALUE 'POPO',
      EIPO              LIKE T185V-PANEL VALUE 'EIPO',
      KPAR              LIKE T185V-PANEL VALUE 'KPAR',
      PSDE              LIKE T185V-PANEL VALUE 'PSDE',
      POAN              LIKE T185V-PANEL VALUE 'POAN',
      PPAR              LIKE T185V-PANEL VALUE 'PPAR',
      KDE1              LIKE T185V-PANEL VALUE 'KDE1',
      KDE2              LIKE T185V-PANEL VALUE 'KDE2',
      PDE1              LIKE T185V-PANEL VALUE 'PDE1',
      PDE2              LIKE T185V-PANEL VALUE 'PDE2',
      PKON              LIKE T185V-PANEL VALUE 'PKON',
      KOAN              LIKE T185V-PANEL VALUE 'KOAN',
      END OF PANEL.
DATA: BEGIN OF ERRTAB OCCURS 20,
       TRANS LIKE TSTC-TCODE,
       ARBGB LIKE T100-ARBGB,
       CLASS(1) TYPE C,
       MSGNR LIKE T100-MSGNR,
     TEXT LIKE T100-TEXT,
       TEXT(123) TYPE C,
       MSGV1 LIKE SY-MSGV1,
       MSGV2 LIKE SY-MSGV2,
       MSGV3 LIKE SY-MSGV3,
       MSGV4 LIKE SY-MSGV4,
      END OF ERRTAB.
*---- Hilfsfelder     -
DATA: PROGRAMM_AUFTRAG LIKE T185V-AGIDV VALUE 'SAPMV45A'.
DATA: LAST_DYNPRO      LIKE T185V-DYNNR,
      WLDAT            LIKE VBAK-BSTDK,
      POSNR            LIKE VBAP-POSNR,
      FIRST(1)         TYPE C VALUE 'X'.
DATA: BEGIN OF XBDCMSGCOLL OCCURS 10.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF XBDCMSGCOLL.
Terminauftrag ( Auftragsart wird fest gesetzt !)
DATA:   BELEGNUMMER LIKE VBAK-VBELN.
DATA:   ERRORCODE LIKE SY-SUBRC.
Statuswerte fuer IDOC-Status
DATA:   BELEG_NICHT_GEBUCHT LIKE TEDS1-STATUS VALUE '51'.
DATA:   BELEG_GEBUCHT       LIKE TEDS1-STATUS VALUE '53'.
*- Direktwerte für Return_variables -
data:
    eid like bdwfretvar-wf_param value 'Error_IDOCs',
    pid like bdwfretvar-wf_param value 'Processed_IDOCs',
    apo like bdwfretvar-wf_param value 'Appl_Objects',
    ape like bdwfretvar-wf_param value 'Appl_Object'.
*- Direktwerte für Workflow_Result -
DATA: C_WF_RESULT_ERROR LIKE BDWFAP_PAR-RESULT VALUE '99999'.
DATA: C_WF_RESULT_OK    LIKE BDWFAP_PAR-RESULT VALUE '0'.

Problem with DYNP_UPDATE_FIELDS and PAI module

Hi gurus,
I have two dynpros (100 and 200) in a module pool, and when I double click in a table field, then appears another dynpro with the values of this field.
To show the fields values in the dynpro 200, I use the function DYNP_UPDATE_FIELDS, in the PBO. The dynpro 200 have a button to return to dynpro number 100.
When appears the second dynpro with the values, show the status-gui of the dynpro 100, and when click the return button, execute another time the PBO and then, at the second time, put the stats-gui of the dynpro 200.
In resume, execute two times the PBO, and then, execute the PAI. If I delete the function DYNP_UPDATE_FIELDS, all works fine, but don't show the values of double click....
Thanks.

Hi gurus,
I have two dynpros (100 and 200) in a module pool, and when I double click in a table field, then appears another dynpro with the values of this field.
To show the fields values in the dynpro 200, I use the function DYNP_UPDATE_FIELDS, in the PBO. The dynpro 200 have a button to return to dynpro number 100.
When appears the second dynpro with the values, show the status-gui of the dynpro 100, and when click the return button, execute another time the PBO and then, at the second time, put the stats-gui of the dynpro 200.
In resume, execute two times the PBO, and then, execute the PAI. If I delete the function DYNP_UPDATE_FIELDS, all works fine, but don't show the values of double click....
Thanks.

Problem with Generic Extratcor - Function Module

Hi Experts,
We have created Generic Extractor using Funcion Module to Load Inventory related data into BW.When we check in Extract Checker its show 330 records.When we check in table for that logic by material we got the same records as 330.The problem is when we extract into BW we are getting more then 695,000 records.Can somebody please tell us where the problem is .Thanks
Vahgar

Hi,
Check in the load monitor, how many records are populated from source system, and how many are populated after transfer and update rules. Maybe there is your problem, not in the extractor but in the transfer/update.
Hope it helps.
regards,
Diego

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with tpcall and tpgetrply functions

Hi,
I have a problem with tpcall() and tpgetrply() functions.
In this example (invoke tpcall()):
FBFR32 *buf;
FLDLEN32 buflen;
buf = a_buffer.getBuffer(); /* getBuffer() returns FBFR32* */
buflen = a_buffer.getLongitud();
/* at this point: buf == a_buffer.getBuffer() */
if (tpcall(a_contenedor.getServname(),
(char*)a_contenedor.getBufferPeticion()->getBuffer(),
a_contenedor.getBufferPeticion()->getLongitud(),
(char**)&buf,
(long*)&buflen,
0) == -1)
if (tperrno != TPESVCFAIL)
LANZAR_EXCEPCION(CADENA_WHAT_SB,
"Error en funcion Execute(), llamada tpcall()",
tpstrerror(tperrno))
/* at this point: buf != a_buffer.getBuffer() */
tpcall() function change the memory address of buf. What is the problem? Is wrong my code? Is a problem with tuxedo version?
My tuxedo version is:
tmadmin -vINFO: BEA Tuxedo, Version 8.0, 32-bit, Patch Level 306
INFO: Serial #: 650522264137-773290431251, Expiration NONE, Maxusers 150
INFO: Licensed to: Telefonica Moviles Espa?a, S.A.
INFO: 56-bit Encryption Package
Thanks,
ANTONIO.

There's nothing wrong with your code or tuxedo. tpcall (and tpgetrply) can change the address of the return buffer if it needs to allocate more memory to hold the data. This is the reason why you pass a pointer to the buffer as the output buffer parameter to tpcall and tpreturn. Everything is working as expected.

Problem with Gnome and D-Bus

Hi to all, i have a problem with Gnome and D-Bus
Versions:
Arch Release: 0.7.2 Testing
Gnome: 2.14.1-2
D-Bus: 0.61-3
Screenshot explain all:
[URL=http://img366.imageshack.us/my.php?image=gpwned6be.jpg][/URL]

1>then i can't promote garnome on this forum??
yeah you can, but not as a solution to gnome related problem in arch. cause this doesn't resolve anything.
2>You don't have to, garnome2.14.2.1(481kb) download the patches and patch it automatically, just change install dir to /usr
(ONLY if you are using console-linux who want gnome a try). of course there is need small arch related patch.(in my experience 0)
eh, i haven't got a clue what this means, putting patches upstream means they will get include in gargnome and upstream releases. i only tried to say we put a lot of our free time in gnome for arch.
2-1>Well said, so choice is the each one's freedom.
and this category isn't arch, this is Desktop Environments,
i installed arch, BUT THAT DOESN'T MEANS I SHOULD USE gnome FROM ARCH!!!
agreed, but again then we won't support your desktop.
ARCH != gnome
3>some bug stuff about Xorg-7.0, include mine
http://bbs.archlinux.org/viewtopic.php?t=22210[/quote]
ah bugs.archlinux.org so it can be fixed.

Problem with ssh and bash-completion

I and a co-worker are having a weird problem with ssh and bash-completion. We have a local config in .ssh/config with hosts we connect everyday. An example:
host foo
hostname foo.org
user foobar
host foobar
hostname foobar.org
user foobar
When we try to type
ssh foo<tab><tab>b<tab>
the console just freeze and we can't type anything, everything we type is ignored, but after about 30 seconds the host is completed.
This works a some time ago, so some upgrade make this happen. Anyone can reproduce this?

quigybo wrote:
Actually thinking about it, rather than using the semi-dodgy fix posted on the bug tracker, we can just test if the daemon is running since we are not on MacOS X. It is cleaner and 250 ms quicker.
--- bash_completion.orig 2010-09-14 05:33:22.000000000 +0930
+++ bash_completion 2010-09-14 05:45:04.000000000 +0930
@@ -1316,10 +1316,12 @@
# contains ";", it may mistify the result. But on Gentoo (at least),
# -k isn't available (even if mentioned in the manpage), so...
if type avahi-browse >&/dev/null; then
- COMPREPLY=( "${COMPREPLY[@]}" $( \
- compgen -P "$prefix$user" -S "$suffix" -W \
- "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
- awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
+ if [ -n "$(pidof avahi-daemon)" ]; then
+ COMPREPLY=( "${COMPREPLY[@]}" $( \
+ compgen -P "$prefix$user" -S "$suffix" -W \
+ "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
+ awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
+ fi
fi
# Add results of normal hostname completion, unless
This is the same test as was used in bash-completion 1.1.
Thanks quigybo, I use your patch, the issue is gone
Why does so many packages depends on Avahi? Maybe make it optdepends is
enough?
my laptop $ pacman -Qi avahi
Required By : gnome-disk-utility gnome-vfs libcups mpd sane

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

SAP NCO 3 (Patch 3) - Problems with USE_SAPGUI and Function Module

Similar Messages

Maybe you are looking for