SAP Query : additional field

Hi,
in my HR query i need to add a new field in infotype specific 9016 to be calculated by ABAP code.
I perform the following steps :
- transaction SQ02, i modify my info-set, in the node of my infotype i add a new field, i give a new name and a LIKE reference, and i generate the info-set, it's ok.
- transaction SQ01 : i add my new field in my request, i check it and it's ok but when i run it, i have a dump : Function module "RPAQ_GET_AF_9016" not found.
Can you explain to me how can i resolve this problem ?
Cheers
Edited by: CECG on Aug 25, 2009 11:08 AM

Hi,
What is the field you have referred to using LIKE statement? If this is infotype 9016, there would be the corresponding table which holds the data for 9016 infotype(PA table...PA9016(i hope so and not sure of HR tables))....
If so please refer to a dataelement for the field and then try to regenrate your query in SQ01 after adjusting the infotype in SQ02.
Hope this helps
Regards
Shiva

Similar Messages

SAP Query - Additional field that collects information from table RESB

Hello gurus. I have a question.
I want to create a SAP Query that shows me the stock level of a list of materials, and also show me the total quantity of order reservations in an additional field.
I created an InfoSet with table MARD, which is the one that holds the Stock information in a plant. Then I created an additional field which would read information from table RESB, the table that holds order reservations per material.
So I wrote this piece of code:
SELECT * FROM RESB
WHERE MATNR EQ MARD-MATNR and
       WERKS EQ MARD-WERKS.
ENDSELECT.
if ( sy-dbcnt NE '0').
      MOVE RESB-BDMNG to ZQTY.
ELSE.
      MOVE '' to ZQTY.
ENDIF.
This works fine. However, this is currently just catching the first record in table RESB that matches my condition.
What I would like is to collect every instance of RESB-BDMNG and add them to field "ZQTY", have it loop in RESB until it finishes finding every record that match the MATNR and WERKS. With this I could get the total number of order reservations that this material has in that table.
Could someone share some coding that would help me achieve this?

Yes! That did it. That's what I needed to do. Thank you so much.
While I'm at it, let me ask you a related question.
When I execute the query, in the first records of the query where there's no value from RESB to transfer, the value of field ZQTY appears empty. Once it finds the first record in RESB and it populates ZQTY with a value, then the rest of the records with no hit get the proper value of 0.
Do you know why the first records in the query appear empty and not with a 0? Is there anything I should add to the coding to fix this?

Sap Query Additional Fields using Abap Code

Hi Experts,
I am relatively new to the world of SAP query (Log Database PNPCE), I have written a number of additional fields to retrieve previous info-type data using the select statement E.G
prev_endda = p0008-begda - 1.
SELECT single bsgrd
      INTO FTE1
      FROM
        pa0008
      WHERE pernr EQ P0008-pernr
      AND   endda EQ prev_endda
Although I can retrieve the previous info-type data , I was wondering if there was a easy way where I could take this a step further and show the Previous , Previous record. I.E
Pernr     FTE Current    FTE1      FTE2
101              60%          30%       75%
I guess what I am asking is , is there a way to loop through the HR info-type records, does anybody know if there is a standard function or macro I can use to achieve this.
Your help is much appreciated.

Hi ,
Thanks for our reply.
I have pasted some example code into my additional field which I have created in SAP Query But im not sure how the loop bit works and how I can populate the additional fields that I have created , could you please explain this
CALL FUNCTION 'HR_READ_INFOTYPE'
EXPORTING
    pernr                 = '000000019'
    infty                 = '01'
    BEGDA                 = '18000101'
    ENDDA                 = '99991231'
tables
    infty_tab             = p0008
EXCEPTIONS
    INFTY_NOT_FOUND       = 1
    OTHERS                = 2
    LOOP AT p0008.
NOT SURE WHAT TO PUT IN THIS SECTION *****
ENDLOOP.
I have created 3 additional Fields in the infoset Current FTE ,FTE1 FTE2 , and I want to loop through the records and populate the relevant Additional field with the employees FTE (I only want to populate where there is a change)
Sample Data
Begda              Endda             FTE        Salary
1/1/2010         31/12/999       60%         19K          (Current FTE)
01/08/2009     31/12/2009     100%       27k           (FTE1)
01/07/2008     31/7/2009         50%       17K          (FTE2)
Thanks in anticipation
DM

How to make SAP Query additional field as one of the selection field ?

Hi experts,
I'm working on a AdHoc query. I added some Additional fields to the infoset. I put Abap code to populate this additional fields as output fields but I want to make these fields as selection fields also.
How can I accomplish this ?
I'd appreciate any answer or suggestion.
Thanks in advance.

See Extended / Quick Search capability with attributes in the following SAP notes.
[482338 - Using Extended Search in ISA B2B, ver. 30|https://service.sap.com/sap/support/notes/482338]
[792556 - Quick search using several attributes|https://service.sap.com/sap/support/notes/792556]
[888528 - ISA R/3 4.0: Extended catalog search not consistent|https://service.sap.com/sap/support/notes/888258]

SQ01 Sap Query - additional fields doesn't appear

Hi everybody,
i've created a SAP Query with transaction SQ01 but one of my additional fields doesn't appear when i execute my Query.
My query shows the G/L account number and the field status Group (table SKB1)
I just need to display equally the text field of "field status Group" but it doesn't work.
When i look at the parameters i can see that it makes the link between the table T004G and SKB1 in order to find the textfield but the field stay blank.
For information T004g is a Pooled table.
Is someone could help me?
Thank you

Hi,
First you need to create a structure in Data Dictionary - SE11. This structure will contain all the fields that you want to display in the query output.
Example - Name the Strucutre as zz_infoset01
fields of the structure( for your requirement )
BUKRS
SAKNR
FSTAG
FSTTX
Go to T-code SQ02
1) Enter the Infoset name - zinfoset01 press create
2) Enter a Short Description - G/L Infoset - 01
3) select radio button - "Data retrieval by program"
               and in "data structure" enter   zz_infoset01
4) select "Integrated program" radio button
5) In the next screen click on the "Data reading program" push button(on the application toolbar)
6) An Editor will open with the following code
REPORT rsaqdvp_template .
declarations
(insert your declarations in this section)
DATA:
zz_infoset01                          TYPE zz_infoset01                          ,
it_data TYPE STANDARD TABLE OF zz_infoset01 WITH HEADER LINE.
selection screen statements
(define your selection-screen here)
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_HEAD>
read data into IT_DATA
(select your data here into internal table IT_DATA)
output of the data
(this section can be left unchanged)
LOOP AT it_data.
zq01 = it_data.                        .
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_BODY>
ENDLOOP.
7) when you insert your code in the sections it will look like this
REPORT rsaqdvp_template .
declarations
(insert your declarations in this section)
Tables:SKB1,
          t004g.
DATA:
zz_infoset01                          TYPE zz_infoset01 ,
it_data TYPE STANDARD TABLE OF zz_infoset01 WITH HEADER LINE.
selection screen statements
(define your selection-screen here)
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_HEAD>
*These will be the input parameters for the query
parameters: sp_bukrs like skb1-bukrs,
         sp_saknr like skb1-saknr.
read data into IT_DATA
(select your data here into internal table IT_DATA)
*get all the G/L for com code and G/L in selection screen
SELECT bukrs saknr fstag
            INTO TABLE it_data
            FROM skb1
            WHERE bukrs = sp_bukrs
            AND   saknr = sp_saknr.
output of the data
(this section can be left unchanged)
*for every G/L get the status text from t004g for lang 'EN'
LOOP AT it_data.
SELECT SINGLE fsttx
                FROM t004g
                INTO it_data-fsttx
                WHERE spras = 'EN' "Language
                AND   bukrs = it_data-bukrs
                AND   fstag = it_data-fstag.
zz_infoset01 = it_data.                        .
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_BODY>
ENDLOOP.
8) Save and generate the Infoset.By clicking on the generate button.
9) Now assign the Infoset to the query in SQ01 and select the output list fields.
let me know if you need more info. Also award points if helpful.
Regards,
Santosh

Ad Hoc query Addition Field code

Dear Experts,
I need amend Ad hoc query to be able to report on Expected End MPP Q0088-EEMPP, It is not a standard field in the infotype for SE16 or SAP Query/Ad Hoc. We need to be able to query off this field. Can someone please point me in the right direction about how to get the calculated value from this field added to queries, or what code is needed.
I have created an additional field in SQ02, i probably need code to make it fetch the data
thanks
haji

Hi,
Please take a look at standard function module HR_GBSMP_MPP_DATES. It returns the expected end date.
Hope this helps.
Donnie

Sap Query custom field assigned to wrong field group (in extract)

Hello,
I want to add an extra field to InfoSet /SAPQUERY/MEBANF at EBAN level. I added a field in a normal way:
I fill it with a constant value. I adapted Sap Query:
In result, I got the value in new column but only for certain rows:
The value is there only for EBAN rows which have EBKN entries related.
I checked the program, and my new field is added to field group %fg07 with some other fields from table EBKN (not EBAN):
Fields from field group %fg07 are inserted to extract only in event get EBKN, so if there is no entries in EBKN, my field will not be inserted into extract:
I tried a lot of things (assigning my field to new field group in InfoSource, adding a field on EBKN level). I can say that every extra field created by me was assigned to field group &fg07.
Am I doing something wrong?
The target is to add new field in the document overview panel in ME2xN transaction. I know that there is user-exit EXIT_SAPLMEQUERY_002 where I can specify a Z* query. But this solution requires a copy of InfoSet and query to Z*. Adding a new field to standard Sap query is the fastest way.
Message was edited by: Rafal Matuszewski
Now I tried to append EBAN table with my Z* field. I regenerated InfoSet and query but the result is still wrong:
insert EBAN-GSFRG into %fg06.
insert EBAN-ZUGBA into %fg06.
insert EBKN-VBELN into %fg07.
insert EBKN-AUFNR into %fg07.
insert EBKN-KOSTL into %fg07.
insert EBAN-ZZDELIV_DATE_MRP into %fg07. <-- here again the Z* field is assigned to field group related to EBKN table

Thanks Sandra

SAP Query Custom Field with ABAP Code

Hi All,
I have a custom field in my SAP query which has some ABAP code under it. The code finally writes some value to a variable. My question is do i need to explicitly link the variable in the ABAP code to the custom field OR it's done automatically. For some reason i don't see any value for this custom field. Thanks.

Thanks Sandra

SAP query text field

Hi,
I created a new customised field in infotype 9000 that has the same domain (but not the same component type) as p0001-stell(job).
During sap query, i notice that this field only contain values and does not contain the text field. Please advise how i can add in the text field for this.

Hi Lanwu,
For the Custom field, let its domain be the same as the Sap standard field P0001-STELL ( JOB) . Do Not Change the Domain.
Instead Create a Custom Data Element on this standard sap domain STELL and use ur naming convection for the text.
Use this Customised or Z Data Element into ur Customised Field.
Now wherever u use this field, the text specified in the data element would pop up.
Thus u wont be touching the standard SAP Fields.
Hope this helps.
Jay Gandhi

SAP Query - Need to join 3 Tables via outer join

Hi,
I need to join 3 Tables using SAP Query. I wish an OUTER JOIN to be performed for the table join.
For Example:
Table 1 has 1000 Entries           Field A             Field B
Table 2 has 300 Entries             Field A            Field C
Table 3 has 100 Entries             Field A           Field D
The normal Join (INNER JOIN) gives me only the records that exists in all the 3 Tables.
But what i need is:
In the above example, If one entry in Table 1 has no matching records in Table 2 / Table 3, there should be an output entry in the SAP Query like
Field A            Field B              Field C            Field D
xxxx              yyyy                  Blank             Blank
If there is a common record that exists in the tables, that record should appear in the same entry in the Query output.
Field A            Field B              Field C            Field D
xxxx              yyyy                  zzzz              aaaa
In this way, there should be a minimum of 1000 entries (Largest no of records in the Tables joined). More than 1000 records in the Query output depends on the number of common records.
Kindly help if you have come across such a scenario.
thanks & regds
sriram

Hi
Please join the outer join as below
Table1 with Field A to Table 2 Field A-----outer join
Table1 with Field A to Table 3 Field A------outer join
then you get the out put as per your requirement
Regards
Damu

Additional fields in SAP Query

Hi ,
We have a requirement in HR reporting wherein we are providing the late attendance records of the employees. That is the person is scheduled to come at a respective time but he comes in late and this record is created in attendence infotype . Now we need to see the variance in his planned and actual arrival . Majorly all the fields are availabe in the Infosets but the one with the variance is not there . So do we need to create a custom report for the same or it can be handled in the SAP query adding one field for calculation. If it can be handled , how can that be possible .
Thanks & Regards

Please check this link:
Re: query report
I guess, it can help for your case too...
Even this:
Re: sap query infoset and fieldgroup
Re: Additional field in SAP Query
Kind Regards
Eswar

Additional field in SAP Query

This problem is about sap query. I have created an additional field in an infoset. The initial header text of this additional field is english. Then I created a query which use the additional field as an output field. If I use this query in other language, however the additional field header remains english. How can I maintain addtional field header to support mutil-language?
Thanks in advance!
--Alex Miao

Hi Alex
Please see if below example helps you to understand:
Supposing, we are displaying material description within our query.
1. So we define the join with MARA & MAKT while creating infoset in transaction SQ02.
2. We create feild groups to identify the fiels we use for selection and display.
3. Here after selecting language key from MAKT, by default this will take SY-LANGU always for the case.
4. To make it applicable for different languages we can code in INITIALIZATION Event.
5. To do so we can do it by two options: Use menupath: Goto->Code->Initialization
i) First option using variable: <b>MAKT-SPRAS = SY-LANGU.</b>.
ii) Second option using Parameter-Id: <b>SET PARAMETER ID 'SPR' FIELD SY-LANGU</b>.
6. Save & Generate.
Now when we execute the query, we are defaulting the language as System Language.
Hope the above info helps you for better understanding.
Kind Regards
Eswar

Sap query and additional fields.

Hello guys.
ABAP it's not my strong skill, but i need to develop some report.
What i need:
input: material, SLED, plant
output: material, SLED, plant, values from characteristic field.
I have created sap query with additional field type c.
Below my code:
TYPES: BEGIN OF charast,
        ATNAM(50)    TYPE c,
        ATWTB(8)     TYPE n,
        X(50)        TYPE n,
        C(50)        TYPE n,
        ATINN(50)    TYPE n,
        END OF charast.
DATA: char TYPE TABLE OF charast WITH HEADER LINE.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
   EXPORTING
     MATNR              = MCH1-MATNR
     CHARG              = MCH1-CHARG
     GET_CLASSIFICATION = 'X'
   TABLES
     CHAR_OF_BATCH      = char.
LOOP AT char into TEST (This is an additional field type C.
   ENDLOOP.
Questions:
1. How i can return internal table into standard abap type, because i can create additional field only with standart types.
2. Need i fetch exporting parameters before calling FM? Or sap query do it automatically, based on given values on selection screen of the report?
3. How i can return only needed field from FM output? Now, when i'm executing FM via SE37 it's show desired result, but when i'm getting it from code i see strange values.
4. If i don't know exactly return by an FM values, how i can fill structure dynamically?
5. How i can return result of a program not only to additional field but to layout?
Sorry for noob questions and thank you in advance guys!

Well, seems like it work fine for me.
Below my crappy, but working code:
DATA: material TYPE MCHB-MATNR,
       batch    TYPE MCHB-CHARG,
       plant    TYPE MCHB-WERKS,
       sloc     TYPE MCHB-LGORT,
       gtdt     TYPE STANDARD TABLE OF clbatch,
       gtdit    TYPE clbatch.
SELECT MATNR INTO material FROM MCHB
   WHERE MATNR = MCHB-MATNR.
ENDSELECT.
SELECT CHARG INTO batch FROM MCHB
   WHERE CHARG = MCHB-CHARG.
ENDSELECT.
SELECT WERKS INTO plant FROM MCHB
   WHERE WERKS = MCHB-WERKS.
ENDSELECT.
SELECT LGORT INTO sloc FROM MCHB
   WHERE LGORT = MCHB-LGORT.
ENDSELECT.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
   EXPORTING
     MATNR = material
     CHARG = batch
     WERKS = plant
     GET_CLASSIFICATION = 'X'
    TABLES
      CHAR_OF_BATCH = gtdt.
READ TABLE gtdt INTO gtdit
   WITH KEY atnam = 'BATCH_SHELF_LIFE_EXPIRY_DATE'.
GTD = gtdit-ATWTB.

Multiple Value in additional fields using SAP Query

HI All,
I have a question related additional field in SAP Query. I tried to create report about PR and PO using SAP Query. Since one PR can be converted to multiple PO, I decided to create additional field
po_1
to display the value of PO that related to the PR. But I meet problem when I want to show several PO number in additional field
po_1
, I couldn't look the way to solve this problem. Can anybody help me? Just for info, I assign value to additional field
po_1
in record processing part.
Thanks....

HI,
IN SQ02, IF table is already in JOIN, just click on the PLUS sign to expand the strcture.
All the field showing Plus sign in the strcture are selected in your query and with MINUS sing are no selected.
So you have to just click on the MINUS sign for the field you want to use through table field.
Generate the query and execute thriugh SQ01.
If you want to add some other field which is not a part of JOIN,
then click on EXTRAS Button shown in the MENU option.
Click on Create button and system will ask abt the additional field.
Regds,
Anil

Add color to an Additional Field inside a SAP Query (Infoset) in ALV

I made an Infoset (transaction SQ02) out of table MARC. I created an Additional Field called "STATUS" which I coded to get a value of 1 or 2 depending on the value of another field in MARC.
How can I make this cell in the resulting Query to appear in different colors depending on the value? I found the command "FORMAT" but that doesn't work on SAP List Viewer (ALV) mode.
This is what I coded in the additional field called STATUS::
clear: STATUS.
if MARC-DISPO = 001.
format intensified color = 6.
move '1' to STATUS.
else.
format intensified color = 7.
move '2' to STATUS.
endif.
The coloring didn't work. What ABAP command should I add to this additional field to make the coloring of the STATUS cell work under ALV mode?

field catalog and layout are saved into database aqrdb
just before displaying the results into ALV table, they are retrieved by function RSAQRT_ALV_DISPLAY which does
concatenate rtmode-act_report sy-langu into l_srtfd_pattern.
import fieldcat = fieldcatalog
         layout   = layout
         sort     = sort
         from database aqrdb(lv) id l_srtfd_pattern.
so in order to display some cells with a different color, you have to
- add an additional field that will contain the color codes of cells
- set values in this field at record level (field is a table of type LVC_T_SCOL)
but also adapt the layout in order to set the field as containing the colors
- put the name of this field into layout (CTAB_FNAME)
- export layout to corresponding entry of aqrdb
this part I don't see exactly where to put it, I guess there is some place where it is possible to manage the layout - if not then you have to do it "manually" i.e. with a small report

SAP Query : additional field

Similar Messages

Maybe you are looking for