SAP Query; change the name of the selection fields
Hi,
I created a SAP query using SQ01. When I execute the report, the selection field are the names of the table fields. As an example, I would like to change the selection field name «Customer number 1» for «Customer number». How can I change this selection field name in a SAP Query?
Thanks,
Julien
Check Page Number 8 of this below mentioned document
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c
a®
Similar Messages
-
In a query, for the selection field 'KNB1-ZWELS' a match-code isn't availab
Hi All,
Creating a query, for the selection field 'KNB1-ZWELS' a match-code isn't available.
Could anyone tell me the reason?
Thanks
GandalfHi,
Match Code Object is not available for the field ZWELS. If required, You need to contact a Developer for creating one . -
CRM - change the selection fields in standard extractor
Hello everyone!
I would like to change the selection parameters for the DataSources 0CRM_SRV_PROCESS_H and 0CRM_SRV_CONTRACT_H in order to include the field CHANGED_AT. However, in the DataSource definition this field appears grayed out (even in process mode).
Is there any way I could change this?
If not, I was thinking about appending a custom field with the the same information and include this in the selection criteria. Would this work?
If not, could I create a generic DataSource whose function module would internally call the standard DataSources own FM with the standard selection criteria and then filter it out further with my own criterion?
Performance is not really an issue here.
Thanks in advance for any input on this!
Best Regards,
Luís Andrade.Hi,
>
scoy123 wrote:
> I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
Refer:-
CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c_comment.
PARAMETERS : p_matnr TYPE matnr.
SELECTION-SCREEN END OF LINE.
Hope this helps you.
Regards,
Tarun -
SAP query change the internal table extracted after a join instruction
Hi Gurus
I would like to know if it is possible to change the data in internal table after that the
join instruction has been executed .
I should have to delete some lines extracted if some conditions are satisfied.
Do you think that it is not possible and it is better to crete a program?
Thanks in advanceHI,
use select and end select.
select single msegbukrs msegwerks msegmatnr msegmenge msegaufnr msegsmbln msegbwart msegshkzg mseg~meins
afkorsnum afpoverid
maststlnr maststlal stpoidnrk stpomenge stpomeins stkobmeng
into (itab-mblnr,
itab-budat,
itab-bktxt,
itab-bukrs,
itab-werks,
itab-matnr,
itab-menge,
itab-aufnr,
itab-smbln,
itab-bwart,
itab-shkzg,
itab-meins,
itab-rsnum,
itab-verid,
itab-stlnr,
itab-stlal,
itab-matnr_r,
itab-bdmng,
itab-meins_r,
itab-bmeng)
from mkpf
inner join mseg on msegmblnr eq mkpfmblnr and mkpfmjahr eq msegmjahr
inner join mara on maramatnr eq msegmatnr
inner join afpo on afpoaufnr eq msegaufnr
inner join mast on mastmatnr eq msegmatnr and mastwerks eq msegwerks
inner join afko on afkoaufnr eq msegaufnr and afkostlal eq maststlal
inner join stko on stkostlnr eq maststlnr and stkostlal eq maststlal
inner join stpo on stpostlnr eq stkostlnr
inner join stas on stasstlnr eq maststlnr and stasstlal eq maststlal and stasstlkn eq stpostlkn
where mseg~werks in s_werks
and mseg~matnr in s_matnr
and mkpf~budat in s_budat
and mseg~aufnr in s_aufnr
and mseg~bwart eq '101'
and mast~stlan eq '1'
and stko~stlty eq 'M'
and stpo~stlty eq 'M'.
if condtion .
append: itab.
endif.
clear: itab.
endselect.
Edited by: ZAHID HAMEED on Oct 12, 2011 3:56 PM -
Order of the selection fields in SAP QUERY
Hello All,
How can we set the order of the selection fields in SAP QUERY!
Regards!
AshishHi,
You can go into infoset and change the order.
Or you can select 1 by 1 in the same order, you want to display.
Below is the link which might help you:
help.sap.com/printdocu/core/Print46c/EN/data/.../BCSRVQUE.pdf
Please revert, if needed more clarifications
Regards,
Yashwin -
To Find the SAP Query from the tranaction code or the program name
Hi,
I have a situation wherein I have to modify the sap query associated with an transaction code.But the problem is that I am unable to find the SAP Query.
<b>Please let me know how to find the SAP query from the transaction code or the program name.</b>
Thanks and Regards,
RupeshHi Rupesh,
1 use FM
RSAQ_DECODE_REPORT_NAME
2. This is one of the best and easiest way.
3. It will provide u the following info.
WORKSPACE
USERGROUP
QUERY
CLIENT
4. Thru TCode U must know the program name first.
This can be discovered using SE93.
Hope it helps.
Regards,
Amit M. -
Can I change the select option text for pnp ldb ?
hi Akll,
I am using a pnp logical database in my report and I have created my own hr category because i wanted to use field ename from the ldb in the selection screen. Now the problem with ename is I cant do a case sensitive search.
So I have replaced it with sname, so now my screen has sname instead of ename, however I want to change the selection text for select option ( at present it is 'EE name can be sorted' )
Kindly advise,
thanks,
GVI guess the text cannot be changed.. anyways you can add the field as an additional field by normal coding in your report
-
How to change the selections in selection screen
Hello all,
while executing web report we are getting a selection screen initially.
1.problem is when we want to change the selections how to procedure after .
when i went to variable screen it is filtering the exciting report. but i want to change the selection.
2.when i run the query in Excel i can see the report as below
Cust1 Mat1 100
Cust1 mat2 20
but when i run in web it is showing as below
Cust1 Mat1 100
Mat2 20
how can i get Cust1 for both Mat1&Mat2 in Web
Thanks in Advance
SandyHi Sharan,
This is Ram, i have been watching this Thread, and tried to solve this problem in the Web to one of my query which i have created for testing purpose.
See dont have much knowledge on WAD, but as the main owner was doing in his case , i am also doint the same way :
Ex: i created the query in the query designer and there i know each and very property how to supress the repeated key etc etc, and i know it even in the Web browzer.
However what i do is i open the query and click on change query and my query is displayed in the query designer and from there you click on the check mark in the top left for executing the query, but insteard of that click on the icon which takes you to the BROWZER.
I usually do like that, but what you told in WAD i did not understand it at all, so can you give me more steps on how to open that in WAD and make the settings please...
Regards,
Ram Pawan -
I need use conditions in the select fields of a query.
Hello,
Is possible, that I can have conditions in the select fields of a query? In a invoice when the type is cancellation I want to put *-1 to price and if is other type the price is normally.
If VBRK.FKART = 'S1' THEN KWERT*-1 else KWERT .
Thank you very much.you can do two things:
1. select the data into internal table and loop through the internal table and do the necessary changes
SELECT fkart kwert
FROM vbrk
INTO TABLE itab
WHERE ...
LOOP AT itab.
IF itab-fkart EQ 'S1'.
itab-kwert = itab-kwert * -1 .
MODIFY itab.
ENDIF.
ENDLOOP.
2. use select-endselect and change the data acc. to your needs inbetween and append the internal table.
SELECT fkart kwert
FROM vbrk
INTO wa
WHERE ...
IF wa-fkart EQ 'S1'.
wa-kwert = wa-kwert * -1 .
ENDIF.
APPEND wa TO itab.
ENDSELECT.
(The first approach is probably faster.) -
Change the selection while I'm typing
Hi everyone,
It is possible with some webdynpro control, like DropDownbyIndex, to select from a list of text the word that I'm typping. something like while I'm typping a word, the control change the selection in the current list automatic.
Thanks in advance,Hi,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/2833ce90-0201-0010-f1af-d3cfe1155b16
Regards,
Sudhir -
SV004 - I need to change the selection condition in the view: J_1BT001W
Hello guys,
Can you please help me with a topic ?
How can I change the selection condition in the view: J_1BT001W ?
I was trying to use se11, but says that J_1BT001W does not exist.
Thanks a lot,
JordanHi Jordan,
The correct view name is J_1BT001WV and not J_1BT001W. It is made of table joins - T001W T001K T005. Please let me know if this answers your question.
Regards
Ram -
How can I change the 'selected' color of one JToggleButton only.
Hi,
This seems like a simple / trivial question, but I just can't figure it out. Is there a way that I can create a JToggleButton and change the selected color of only that JToggleButton.
I'm trying to create a simple sidebar like component for navigation within my app. A group of JToggleButton[s] added to a ButtonGroup (with the proper layout / sizing) works great, but the default JToggleButton colors don't suit my needs. I know that I can change the colors using the UIManager / UIDefaults, but I don't want to change the defaults for every JToggleButton in my app. I only want to change the defaults for a few select JToggleButton[s].
For example, I can do this:
UIManager.put("ToggleButton.select", UIManager.getColor("Table.selectionBackground"));
UIManager.put("ToggleButton.background", UIManager.getColor("Table.background"));but I'd rather do something like this:
JToggleButton jtb = new JToggleButton("Toggle Button Text");
jtb.setSelectedColor(UIManager.getColor("Table.selectionBackground"));
jtb.setBackground(UIManager.getColor("Table.background"));The only thing is, I can't find any method that is the equivilant of 'setSelectedColor(Color)' for JToggleButton.
I know I could do it by adding some listeners to the JToggleButton[s], but that seems a little complicated for something like changing a color.
I'd also seen a solution in the forums where someone had extended the ButtonUI of the pluggable look and feel they were using. I'm not interested in modifying the look and feel I'm using. As far as I'm concerned, that would defeat the purpose of having a pluggable look and feel as I would have to duplicate my efforts for every look and feel I want to use.
Any help would be appreciated,
Ryantry this
import javax.swing.*;
import java.awt.*;
class Testing extends JFrame
public Testing()
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setSize(250,75);
setLocation(400,300);
JPanel jp = new JPanel();
JToggleButton jtb = new JToggleButton("Toggle me");
jtb.setUI(new MyUI());
jp.add(jtb);
getContentPane().add(jp);
public static void main(String args[]){new Testing().setVisible(true);}
class MyUI extends javax.swing.plaf.metal.MetalToggleButtonUI
public Color getSelectColor(){return Color.BLACK;}
} -
How to change the select options selection text dynamically in webdynpro abap ?
I am using standard interface WDR_SELECT_OPTIONS.... i want to change the Selection text dynamically in my select options.I.E. if the select option is for VBELN field than i want to change its description SALES ORDER Number through Code to some other text.
If anyone can please help me in this.Hi,
You can achieve your requirement as below
Get the range table of your selection field as below
data lt_range_table type ref to data.
wd_this->m_handler->GET_RANGE_TABLE_OF_SEL_FIELD(
exporting
i_id = 'VBELN'
receiving
rt_range_table = lt_range_table ).
Update the selection field with new description - 'Your New Text'
wd_this->m_handler->UPD_SELECTION_FIELD(
exporting
I_ID = 'VBELN'
I_DESCRIPTION = 'Your New text'
I_IS_AUTO_DESCRIPTION = abap_false
IT_RESULT = lt_range_table ).
You can also pass the other parameters as per your requirement
Hope this helps you.
Regards,
Rama -
How can i used pai in screen 1000 to change the select-options field?
hi,all.
I want used pai to change the select-options field,but it can't works.
the mainly code is:
REPORT ZTEST99.
TABLES :MARA,MAKT,MARC.
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TITLE0 .
select-options:s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF BLOCK B0.
parameters:p_flag as checkbox.
at selection-screen OUTPUT.
LOOP AT SCREEN.
IF P_FLAG = 'X' .
IF screen-group1 = 'ID1'.
screen-input = '0'.
ELSE.
screen-input = '1'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
CALL SCREEN 1000.
when i click p_flag,then i want to change s_werks from OBLIGATORY to no OBLIGATORY.
how can i realized?
Thanks for all.
SunHi ,
change your code like this.
Change in your code:
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF SCREEN 100 .
At selection-screen.
if sy-dynnr = '100'.
IF P_FLAG = 'X' .
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
else.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = 1.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
my code :
REPORT Z50871_SELECTOPS_DYNAMIC.
PARAMETERS : CH_EBELN AS CHECKBOX,
CH_VBELN AS CHECKBOX.
DATA: V_EBELN TYPE EKKO-EBELN,
V_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
AT SELECTION-SCREEN OUTPUT.
IF SY-DYNNR = 100.
IF CH_EBELN = 'X' AND
CH_VBELN = ''.
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G1'.
SCREEN-ACTIVE = '1'.
ELSE.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF CH_VBELN = 'X' AND
CH_EBELN = '' .
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G2'.
SCREEN-ACTIVE = '1'.
ELSE.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF CH_EBELN = 'X' AND CH_VBELN = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G1'
OR SCREEN-GROUP1 EQ 'G2' .
SCREEN-ACTIVE = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF SY-DYNNR = 1000.
IF CH_EBELN = 'X' OR CH_VBELN = 'X'.
CALL SELECTION-SCREEN 100.
ELSE.
MESSAGE I000(Z50871MSG) WITH 'Please select atleast one checkbox'.
ENDIF.
ENDIF.
regards
Sandeep Reddy -
Is there any event listener for changing the selection of layer?
Hi all,
I am looking into an event listener which fires on changing the selection of layer. I found 'Select' event listener which fires on selecting the different object.
Actually the problem with Select event listener is that when we select an object and move it and deselect it by clicking on the document, event fires on the selection of that object. But if we again select the same object and move it, no event is fired at that time.
Is there any workaround of this? So that the event is fired every time when we select the same object.
Please help me on this..
Regards,
VG.Thanks for the reply..
Actually I want the same behaviour as in illustrator i.e
- Select a layer. (Notifier calls the listener)
- Move it.
- Click on the document.
- Again select the same layer. (Notifier calls the listener again)
- Move it.
But in photoshop,
- Select a layer. (Notifier calls the listener)
- Move it.
- Click on the document.
- Again select the same layer. (Notifier doesnot calls the listener again as the layer is already selected in panel as you explained.)
- Move it.
Is there any way to get the same behaviour of illustrator in photoshop?
Maybe you are looking for
-
What do I do?
-
Issue on behalf of functionality in the shopping cart
Hi, Suppose A & B users are there . If A created shopping cart on behalf of B. User A name is appearing in the shopping cart instead of appearing user B in the requester field. Is it need to do any settings to get the B user in the requester field?
-
How do I remove a navigation pane in acrobat reader XI
How do I remove at all a navigation pane on the left in acrobat reader XI? It is really very annoying remove it hundred times using the right mouse button.
-
Bad connectivity with T510 minidock
I've actually been using the dock for quite awhile now; normally it works great, and I have my external monitor attached (1920 x 1080 @ 60 Hz, 2 ms response) and it all works great. There's just one problem though -- my USB connectivity seems to be p
-
How do I Stop Neighbors from Printing on our Printer (HP 3510)
We have a shared Wi-Fi network (on a college campus), and our neighbors (who speak little English) keep printing on our printer. We assume this is a mistake, and they have a similar printer, so they are choosing the wrong printer. How do we block the