Sap query report-selection screen modification

Hi
I have created a SAP query report using the logical database KDF ,the selection screen was created automatically.For vendor report open item and Cleared item Push button would be there in FBL1N but here it only displays Open key date,clearing dates.The open key date is mandatory to give though i give clearing dates as i need vendor cleared items.
Is ther way to change the selection screen to get the option open item and cleared item push button as in FBL1N.
This is because i was filtering a vendor only for particular doc type only for clearing items but report takes open item too though i meantioned clearing date rate.How to modify the selection screen in sap query report when Logicaldatabase is selcted.

I need to get only the cleared items.I donot need open items.Then if go for BSIK is it wrong.Should go only for BSAK.
I couldnt find the table BSAK in logical database KDF.
Edited by: mysap query on Mar 18, 2009 3:15 PM
Edited by: mysap query on Mar 18, 2009 3:15 PM

Similar Messages

SAP Query DB - Selection screen

Hi!
I am workin with a DB for SAP Query. I tried it and there is just one problem: In the report selection screen there is a field (from the DB) that is mandatory. I wanted to exclude that field or at least to make it not mandatory. Is it possible? How?
Thank you

Hi,
Go to SQ01. Input your Query. Press change button. Press Basic list. In the left side you will see check box for list fields and selection fields. Remove the check box for whatever field you dont wan in the selection screen.
Thanks,
Senthil

SAP Query and selection screen fields

Hi,
I am currently modifying a Query. I have added a new selection field. The fieldname for this selection field has been autogenerated within the query and I have pasted a bit in here:
SELECT-OPTIONS SP$00015 FOR ZERROR_FLG LOWER CASE.
SELECT-OPTIONS SP$00022 FOR KNA1-ERDAT.
SELECT-OPTIONS SP$00023 FOR KNA1-ERNAM.
SELECT-OPTIONS SP$00027 FOR ZLOEVM LOWER CASE.
SELECT-OPTIONS SP$00030 FOR ZPARTNERNO
NO INTERVALS NO-EXTENSION.
I relation to this select -option, I want to execute a few lines of code that only is executed if the user has filled in a value in teh ZPARTNERNO field. However, no matter if I use the field name ZPARTNERNO or SP$00030 it has no effect.
Any good ideas ?

HI,
In the AT SELECTIOn-SCREEN event, you can write the code
IF not <b>SP$00030[]</b> is initial.
write the code which you want to execute before the output
ENDIF.
if you want in START-OF-SELECTION>
IF not <b>SP$00030[]</b> is initial.
write the code which you want to execute before the output
ENDIF
Regards
Sudheer

Selection screen modification based on various buttons in selection screen

Hi,
I have 1 query related with Selection screen modification.
In my Report Program,I have created GUI Status for my selection screen
Now 2 buttons in application toolbar are coming on selection sceen.
For this i used,'At selection screen output' event.
And there are 2 blocks on selection screen.
If user press button1 then block2 should not display.
and if user press button2 then block1 should not display.
but the problem is i m not getting reqd result and also while doing debugging its not showing me sy-ucomm value.
Any pointers on this.
Thanks,
Mamta

Hi Mamta,
   have it in a group then you can write code accordingly see sample example,
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS       : p_r1 RADIOBUTTON GROUP rad
                        USER-COMMAND clk DEFAULT 'X'.            " upload Radio Button
SELECTION-SCREEN COMMENT 5(35) text-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 001 WITH FRAME TITLE text-001.
PARAMETERS: p_upl       LIKE rlgrap-filename MODIF ID a           "Upload File
                         DEFAULT 'c:\temp\parbmat.xls',
            p_werks     like t001w-werks MODIF ID a,              "Plant
PARAMETERS: p_rest      LIKE rlgrap-filename MODIF ID a           "Dwonload File Path
                         DEFAULT 'c:\temp\Success.xls'.
SELECTION-SCREEN : END OF BLOCK 001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_r2 RADIOBUTTON GROUP rad.
SELECTION-SCREEN COMMENT 5(35) text-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : BEGIN OF BLOCK 002 WITH FRAME TITLE text-002.
PARAMETERS     : p_plant LIKE marc-werks MODIF ID b.                "Plant
PARAMETERS     : p_lgort LIKE mard-lgort MODIF ID b.                "Storage Location
PARAMETERS     : p_vkorg LIKE mvke-vkorg MODIF ID b.                "Sales Organization
PARAMETERS     : p_vtweg LIKE mvke-vtweg MODIF ID b.                "Distribution Channel
SELECT-OPTIONS : s_mat FOR mara-matnr MODIF ID b.                  "Material No No
SELECT-OPTIONS : s_dat FOR mara-ersda MODIF ID b.                  "Date on Record Created
PARAMETERS     : p_down LIKE rlgrap-filename MODIF ID b
                  DEFAULT 'c:\temp\Material Master.xls'.           "Download File Path
SELECTION-SCREEN : END OF BLOCK 002.
AT SELECTION-SCREEN OUTPUT.
*Inactive Fields depending on the radio button
LOOP AT SCREEN.
    IF p_r1 = 'X'.
      IF screen-group1 = 'B'.
        screen-active = 0.
      ENDIF.
    ELSEIF p_r2 = 'X'.
      IF screen-group1 = 'A'.
        screen-active = 0.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Edited by: suresh suresh on Jul 28, 2009 12:42 PM
Edited by: suresh suresh on Jul 28, 2009 12:42 PM

Debugging in SQ02 (Sap Query Report)

Hi All ;
I want to learn that ,how can I debug a sap query report.I added some fields to the query with code.
How can I reach that code by debugging ?Thanks for your reply.
Regards.
Fırtına.

Hi Yigit,
Every Query generated one program like AQZZ/FSCMA/IS===CDM_10_Q1=====
Go To your QuerySQ01 , run your query and From selection screen, check your program name after that you can search your added code. what you added in infoset but your breakpoint and debug your query code.
Regards,
Prasenjit

SAP QUERY report for vendor line items

Hi
I have created a SAP QUERY report for vendor line items with fields vendor no.,vendor name,amount,company code and period.But there is one line item i donot know from wher system is getting it picked with is not in that vedor account,when i compare with fbl1n.I checked the document number too...the same doc number is twice in my query report.One with correct amount and another with wrong one.How do i chk.Where did i go wrong in creating query.I used logical database KDF.
Please advise.

i chked...how do we get the amount displayed in query...it just displays amount no debit credit symbol... i have selected BSEG-DMBTR field but no -/+ sign,how is it done in query,please suggest.

Add a button in report selection screen

Hi Experts,
I want to add a userdefined button in report selection screen....so far i have written code like this,...
TABLES : sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
PARAMETERS: P_ID LIKE ZBAPITABLE-ID,
P_NM LIKE ZBAPITABLE-NAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-001 FOR FIELD R1.
PARAMETERS: R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-002 FOR FIELD R1.
PARAMETERS: R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-003 FOR FIELD R1.
PARAMETERS: R3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-004 FOR FIELD R1.
PARAMETERS: R4 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN: FUNCTION KEY 1.
MOVE 'SAVE' TO sscrfields-functxt_01.
If i use code like this button was added in application tool bar
but in my selection screen i have two blocks ....in first block i have input fields, and in second there is set of radio buttons...Just below that i want to put one button ....how it is possible...
can anyone plz help me?
Regards,
veena.

Here's th docu link:
[Pushbuttons on the Selection Screen|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba81635c111d1829f0000e829fbfe/frameset.htm]
Regards,
Clemens

Object text not coming in report selection screen

Hi,
i have an object task type for which text has been loaded.this is included in one reports selection screen.But in F4 only kee is displayed and not text.If check button is pressed text is displayed besides key.Also text doesnt come after report is executed.
please help.
Thanks,
Prasanna N.

Hi Prasanna,
In the Query Designer goto the properties of the required object that you want to display key and text for it, Select the Key and Text Display option. Then you can see in report key and text for that object.
Hope this helps.
Veerendra.

Query views - selection screen fields double

Hi expects,
BW 3.5 SP13.
Do you know why I have double fields in WEB report selection screen ? example Month/year ?
In WEB properties I flag 'Display same variables only once'.
I have a WEB report with one table based on a query and with two charts based on query views from the query. Some fields are mandatory in selection screen Month/year.
Br,
Ole Paludan

Hi,
It's query views based on same query also use in WEB report, so variables are the same.
Query view Purpose: to get fewer key figures to charts - but still by query show all key figures in table.
BR,
Ole

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Dump in SAP query report

Dear All,
I have written some development in SAP Query report.
The main aim is to assign to own defined parameter par1 combination of version and object-partner (internal order with defined order type).
The text is following:
DATA: it_aufk like aufk
      occurs 10 with header line.
   DATA: p-auart like aufk-auart.
   select * from AUFK into table it_aufk
     where AUFNR = coep-parob1+2(12).
if sy-subrc = 0.
   if coep-versn = '000'.
    par1 = 1.
   elseif coep-versn = 'GR0'.
    par1 = 2.
endif.
endif.
if coep-versn = 0 and ( p-auart = 'V112' or p-auart = 'V114' ) .
    par1 = 1.
endif.
I have performed check and generated this info-set successfully.
Than I have generated program in queries - other function- generate program.
I execute report and get dump.
What did I miss?
With best regards,
Kamila.

Category               ABAP Programming Error
Runtime Errors         CONVT_NO_NUMBER
ABAP Program           AQICZCO=========QUE_KZHAKEN_01
Application Component Not Assigned
Date and Time          15.12.2011 16:18:35
Short text
     Unable to interpret "GR0" as a number.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "AQICZCO=========QUE_KZHAKEN_01" had to be termi
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     This exception cannot be caught in the context of the current statement.
     The reason for the exception is:
     The program attempted to interpret the value "GR0" as a number, but
     since the value contravenes the rules for correct number formats,
     this was not possible.
How to correct the error
    Whole numbers are represented in ABAP as a sequence of numbers, possibl
     with an algebraic sign.
    The following are the possibilities for the representation of floating
    point numbers:
      [algebraic sign][mantissa]E[algebraic sign][exponent]
      [algebraic sign][whole number part].[fraction part]
    For example, -12E+34, +12E-34, 12E34, 12.34
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "CONVT_NO_NUMBER" " "
    "AQICZCO=========QUE_KZHAKEN_01" or "AQICZCO=========QUE_KZHAKEN_01"
    "START-OF-SELECTION"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

Issue in transaction code creation for sap query report .

Hi Gurus,
I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
2) By using parameter transaction options in start object of se93
What are the difference between creation of these two ways. Please specify the advantages and disadvantages of both methods.
Regards,
Suneel Kumar Uggina.

Hi Jogeswara Rao,
But I am getting problem while transporting form development system to the production system. After transporting to Production system I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And I would like to know on what conditions should I have to use the First one and as well as a second one in sap query reports.
Thank You,
Suneel Kumar Uggina.

Transaction code for SAP query reports

Hi All,
I am trying to create transaction code for sap query report but couldn't go further.
1) Created User group in SQ03
2) Created infoset in SQ03 and assigned that to the user group
3) Created query in SQ01 using the infoset.
I executed the report in SQ01 and it is working fine.
Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
Assign transaction code to SAP Query (created via SQ01)
But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
Thanks in advance

HI,
based on the thread you've already mentioned:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-EXTDREPORT = Name of the Query
D_SREPOVARI-REPORT = User Group
So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
best regards, Christian

Sap query report-selection screen modification

Similar Messages

Maybe you are looking for