SAP R/3 4.7 EXt200 installation on RedHat Linux 5.2 with Oracle 10G

Hi,
I got this error during Database Instance Installation:
All file system node operations of table tORA_SapdataNodes processed successfully.
ERROR 2009-08-31 11:04:39 [iaxxinscbk.cpp:289]
abortInstallation
MDB-06020 File not found: [no oracle rdbms file found].
I am done with CI Installation.
Any help would be appreciated.

Hi ,
     First of all please check availability of your OS + DB requiremnts whether it is supported by SAP or not.You can check this at Product Availability Matrix at ::
http://service.sap.com/pam
     If this support for your environment i.e.RedHat Linux 5.2 with Oracle 10G then be informed that after starting sapinst in step create database it will prompt you for installing your oracle DB. So open a new window & install your databse ,do the patching of your DB & then continue with sapinst after successfull installation of oracle.Rest of details sapinst will prompot you during instal;lation.
    Hope this will guide you for your query.
Thanks..
Mohit

Similar Messages

Installation problem under AIX 5.3 with Oracle 10g

Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01                           (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = ã ±ã ±ã °â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis Porpodas

Hi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4       *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed              rc = 2
|
|                              RSCP - Error
| Error from:            Codepage handling (RSCP)
| code: 128 RSCPENOOBJ   No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no:    2 line:    75          T100: TS008
| TSL01: CPV p3: Dummy-IPC   p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
      1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
              search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
      2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
              search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

Installing SAP R/3 4.7 SR1 EXT200 on Linux 5.2 with Oracle 10G (10.2.0.2)

I am getting following error which executing the DB Load. I am done with CI installation and Installed Oracle 10g with patch level 10.2.0.2( according to PAM)
I got following error in sapinst.log file:
INFO 2009-08-31 17:12:48
Working directory changed to /home/rq1adm/sapinstall_DB.
INFO 2009-08-31 17:14:08
Task files created
INFO 2009-08-31 17:14:08
Command files created
ERROR 2009-08-31 17:14:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPDOKCL.log
ERROR 2009-08-31 17:17:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPSSEXC.log
ERROR 2009-08-31 17:20:09
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPAPPL2.log
ERROR 2009-08-31 17:25:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPAPPL0.log
ERROR 2009-08-31 17:31:09
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPAPPL1.log
ERROR 2009-08-31 17:32:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPSDIC.log
ERROR 2009-08-31 17:33:39
MSC-01015 Process finished with error(s), check log file /home/rq1adm/sapinstall_DB/SAPDD03L.log
SAPDOKCL.log:
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TSK) ERROR: Unable to rename /home/rq1adm/sapinstall_DB/SAPDOKCL.TSK to /home/rq1adm/sapinstall_DB/SAPDOKCL.TSK.bck
(TSK) ERROR: OS error message: No such file or directory
/sapmnt/RQ1/exe/R3load: job finished with 1 error(s)
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171410
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: DOKCLU created #20090831171410
(IMP) INFO: import of DOKCLU completed (1262437 rows) #20090831171545
(DB) INFO: DOKCLU~0 created #20090831171548
(DB) INFO: disconnected from DB
/sapmnt/RQ1/exe/R3load: job completed
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171548
SAPSSEXC.log:
/sapmnt/RQ1/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#7 $ SAP
/sapmnt/RQ1/exe/R3load: version R6.40/V1.4
/sapmnt/RQ1/exe/R3load -dbcodepage 1100 -i /home/rq1adm/sapinstall_DB/SAPSSEXC.cmd -l /home/rq1adm/sapinstall_DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TSK) ERROR: file /home/rq1adm/sapinstall_DB/SAPSSEXC.TSK.bck already seems to exist
             a previous run may not have been finished cleanly
             file /home/rq1adm/sapinstall_DB/SAPSSEXC.TSK possibly corrupted
/sapmnt/RQ1/exe/R3load: job finished with 1 error(s)
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171710
SAPAPPL2.log:
/sapmnt/RQ1/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#7 $ SAP
/sapmnt/RQ1/exe/R3load: version R6.40/V1.4
/sapmnt/RQ1/exe/R3load -dbcodepage 1100 -i /home/rq1adm/sapinstall_DB/SAPAPPL2.cmd -l /home/rq1adm/sapinstall_DB/SAPAPPL2.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: IACKEYCOLD~001 created #20090831171940
(DB) INFO: IACKEYCONV created #20090831171940
(IMP) INFO: import of IACKEYCONV completed (0 rows) #20090831171940
(DB) INFO: IACKEYCONV~0 created #20090831171940
(DB) INFO: IACKEYCONV~001 created #20090831171940
(DB) INFO: IACMIME created #20090831171940
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TSK) ERROR: file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK.bck already seems to exist
             a previous run may not have been finished cleanly
             file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK possibly corrupted
/sapmnt/RQ1/exe/R3load: job finished with 1 error(s)
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171940
WE have OCFS2 as a file system( on shared disk location)/sapmnt/RQ1/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#7 $ SAP
/sapmnt/RQ1/exe/R3load: version R6.40/V1.4
/sapmnt/RQ1/exe/R3load -dbcodepage 1100 -i /home/rq1adm/sapinstall_DB/SAPAPPL2.cmd -l /home/rq1adm/sapinstall_DB/SAPAPPL2.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: IACKEYCOLD~001 created #20090831171940
(DB) INFO: IACKEYCONV created #20090831171940
(IMP) INFO: import of IACKEYCONV completed (0 rows) #20090831171940
(DB) INFO: IACKEYCONV~0 created #20090831171940
(DB) INFO: IACKEYCONV~001 created #20090831171940
(DB) INFO: IACMIME created #20090831171940
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(TSK) ERROR: file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK.bck already seems to exist
             a previous run may not have been finished cleanly
             file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK possibly corrupted
/sapmnt/RQ1/exe/R3load: job finished with 1 error(s)
/sapmnt/RQ1/exe/R3load: END OF LOG: 20090831171940
WE have OCFS2 as a filesystem ( on shared location)
Thank you,
Raj.

Hello Rajesh,
The log clearly says,
ERROR: file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK.bck already seems to exist a previous run may not have been finished cleanly. file /home/rq1adm/sapinstall_DB/SAPAPPL2.TSK possibly corrupted
below existing thread will help you.
Re: DataBase Instance cannot create task file during the installation
SAP Note 455195
Regards,
Debasis.

Installation of CRM 2007 in Windows with oracle and cluster environment

Dear Experts,
We are about to start the installation of CRM 2007 (ABAP+JAVA) with
Oracle 10g on Windows x64 in cluster environment. In the SAPINST dialog
box under High availability option, I could see installation options like ASCS
Instance, SCS Instance, First MSCS node, Database Instance, Additional
MSCS Node, Enqueue Replication Server, Central Instance and Dialog
Instance.
I have gone through the installation guide. I have below queries
regarding the same. Can you please clarify the same
1) Our requirement is we want to have an ACTIVE-ACTIVE cluster setup
with sap service running in Node A and Database running in Node B. Can
we have this setup in ABAP+JAVA setup
2) Also,in the SAPINST dialog box as said above except last two
(Central and Dialoge instance) as per standard installation guide are
to be installed in shared drives as per the requirement. But, central
and dialog are said to be installed locally on any one node in MSCS or
in separate server. As per my understanding Dialog instance will be
used for load balancing which we do not require now. Hence I feel this
is optional in our case. Where as Central Instance I am not able to
understand why this option is for? Is it mandatory to be installed or optional. If
so, when I installed it in one of the MSCS node the incase of failover
how does it effect the system. As per my understanding ASCS and SCS
comprise central instance.
Please clarify and thanks in advance.
Regards,
Sharath Babu M
+91-9003072891

I am following as per the standard installation guide.
Regards
Sharath

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Question about SAP installation with Oracle 10g

I have successfully installed Oracle 10g on Windows server 2008 R2 64bit. I can connect to the database using mysql or through command prompt and run SQL commands.
I started installing the SAP EHP1 for SAP NetWeaver 7.0 ("51038620_13 BS 7 SR1 Installation Master Windows Server on x64 64bit") The installation goes very smooth. I choose the SAPSID and the DBSID sid, but then it gives an error stating to install oracle and continue or stop the installation & install Oracle. I have tried on continuing the installation since Oracle is already installed but I get the same message again and again.
Does it have to do with ORACLE 10g Sid. My Oracle SID is set to "ORCL" should it be the same as DBSID (during SAP Installation). Or the Oracle needs to be installed after SAP installation gets to the point for Oracle Installation. Please assist what needs to be changed. I can reinstall Oracle if needed. Any tips or comments would be nice.

> Does it have to do with ORACLE 10g Sid. My Oracle SID is set to "ORCL" should it be the same as DBSID (during SAP Installation). Or the Oracle needs to be installed after SAP installation gets to the point for Oracle Installation.
You can't "change". You installed the Oracle software using "setup.exe" - which is wrong. You also created an example database - which is also not correct.
The Oracle software is installed, according to the installation guide, as
- start "sapserver.cmd" on the Oracle DVD (the SAP media)
- install the software according to the installation guide
- install the latest patchset
- install the latest PSU patch
--> and then start sapinst.
Markus

Oracle 8i Installation on Redhat Linux AS 3.0

Hi guys,
I am just doing some home work before installation of Oracle 8i Enterprise server on Redhat Linux AS 3.0. Before I started my work on this, I planned to install 8i on AIX 5L, which was a bad idea. Because 8i being a 32bit db and 5L being 64bit kernel, and also this combination is not supported. But with little tweeking and installing few patches, things should work.
Anyway, I would like to know, if any of you have installed 8i on RH Linux AS 3.0, and do any of you think I need to worry about 32 & 64 bit? I am installing this combination on Compaq PL 6500 server, will there be any problem, because PL 6500 is 32 bit processor? Please pass on any information which can help me in a proper installtion, Thanks in Advance

Joel,
I am new to this company. This is my first year here, from last one and half year my company was trying to migrate from Informix to Oracle. After I joined I came to know that my predecessor started the project on 8i and left the project half way thru. Then I took over the project and completed the migration from Informix to Oracle. My company spent awful lot of money on this project due to lack technical know how and mislead by the technology staff who has no knowledge of oracle or UNIX (they are bunch of old NCR and Cobol guys here). So bottom line is if I submit a proposal to my boss of upgrading from 8i to 9i or 10g, which I will, probably won't be happy to see. But on the other hand we will loose support and left with no choice, I can only say that I am sorry for them.
Anyway, this is just a part of disorganized IT shop we have here, it needs a major facelift, and I am just pushing one at a time. Thanks for your reply, I really appreciate.

Oracle 8i installation on RedHat Linux 7.3

Hi,
I'm having a tough time installing Oracle 8i Ent Ed on Redhat Linux 7.3.
At first it was giving me this error and nothing else :
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
Now, after I read many How-tos and did
export LD_ASSUME_KERNEL=2.2.5
its starts the installer runs for some time but always just vanishes after selecting
Typical Installation, processing gows upto 84% and then just....vanished.
What m I missing?
I've done the following:
Installed
compat-glibc
compat-egcs
compat-libtdc++
compat-libs
from CD 2 of linux 7.3 (6.2 compatibility) as some How-tos suggested.
also installed jre 1.1.8 from www.blackdown.org
now what do i do? please help me as soon as possible.
Thanks in advance..

Joel,
I am new to this company. This is my first year here, from last one and half year my company was trying to migrate from Informix to Oracle. After I joined I came to know that my predecessor started the project on 8i and left the project half way thru. Then I took over the project and completed the migration from Informix to Oracle. My company spent awful lot of money on this project due to lack technical know how and mislead by the technology staff who has no knowledge of oracle or UNIX (they are bunch of old NCR and Cobol guys here). So bottom line is if I submit a proposal to my boss of upgrading from 8i to 9i or 10g, which I will, probably won't be happy to see. But on the other hand we will loose support and left with no choice, I can only say that I am sorry for them.
Anyway, this is just a part of disorganized IT shop we have here, it needs a major facelift, and I am just pushing one at a time. Thanks for your reply, I really appreciate.

Installation errors with Oracle 10g Express Edition client.

Hi,
I want to use the Oracle 10g XE client on my Ubuntu (Lucid) laptop. I am following the installation instructions as mentioned at Installing Database Oracle XE Client. When I run the .sh file for my bash shell, I keep getting this error message:
root@machine:/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin# . ./oracle_env.sh
/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin/nls_lang.sh: 112: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/client/bin/nls_lang.sh: 112: [[: not foundAnd, when I look up nls_lang.sh at around line 112, I see this:
# Detertmine the LANGUAGE_TERRITORY part of NLS_LANG
# we derive it from the current locale by inspecting the LC_ALL and
# the LANG environment variable. Other LC_* environment variables
# are not inspected.
if [[ -n "$LC_ALL" ]]; then
locale=$LC_ALL
elif [[ -n "$LANG" ]]; then
locale=$LANG
else
locale=
fiHow do I get the client working ?

So, I have been searching around to look for a method to enable the client installed on my laptop to connect to the database. Granted that, the server is not installed on my local machine. But, I am simply, unable to find any clues as to how do I specify the database name that the client should connect. The ORACLE_SID parameter needs to hold a database name; but, where are the IP address and port number mentioned for the database ? One site recommended that tnsping be used to check for database existence; whereas, tnsping is not installed. Then, the commonest hint that I keep bumping into - TNSNAMES.ORA file. Since I have only the client installed, I don't even see the network/admin folder (or whatever the path is to the .ora file) under /usr/lib/oracle/xe/app/oracle/product/10.2.0.
It can't be this hard to connect to an Oracle server with only a itsy-bitsy Oracle installed on my local machine, hmmm ?

CRM 2007 installation on Windows 2003 64bit server with oracle

Hi Gurus
In step INSTALL SOFTWARE UNITS
the following errors are encounterded
FCO-00011 The step enableUsageTypes with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|11|0|enableUsageTypes was executed with status ERROR
The following message from java.exe.log
Severe (internal) error. Return code: 16.
Error message from sapinst_dev.log
CJS-30156 SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/CRM2007/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/callSdmViaSapinst.log for more information.

Hi,
I also faced same issue.
I have edited KEYDB.XML file. In that file replace ERROR woth OK and continue the installation. Before editing copy file callSdmViaSapinst.log to know what are the components (failed components) need to be deploy after sucessfull installation.
KeyDB.xml file located under location C:\Program Files/sapinst_instdir/CRM2007/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI
This method is not recommended by SAP. If you find any other solution rather than this please update in same message.
Suraj

Installation problem on Linux Slackware 7.1 (Oracle 8i)

I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
I read the installation manuals and make all steps, but the runInstaller don't work.
I get this message:
./runInstaller
The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory
I try --> ln -s /usr/local/jre118_v3 /usr/local/java
and --> ln -s /usr/local/jre118_v3 /usr/local/jre
and put in PATH --> /usr/local/jre/bin
Nothing work's.
Somebody can help me ?????
Thank's ....

Hello!
I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, >that if you install the latest
glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
still die. The DBCA problem was apparently >a Java issue that is fixed in
the errata. But you're still out of luck >since the exes won't work.
It might appear that this is a problem with >Red Hat Linux 7. But it appears
that it is a problem with some assumptions >that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
prove false with later glibc versions. As >other Linux distributions adopt
the new glibc Oracle will fail to work on >them as well.
The best advice I can give at this point is >to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
8.1.7 release.
ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
Maybe you guys should try your luck on an earier version of slackware?
Hope that helped...
null

Installation 4.6 on my laptop with Oracle 8.1.7

hi there
i am new to the SAP and i am trying to install IDES 4.6 on my laptop i am running Windows Advance Server Service pack 4 please guide me or send me some information on how to install IDES 4.6. i am new to i don't have SAP User ID and password where i can not download any thing from their site.
this web site is my only hope.
thanks in advance my email address is [email protected]

I psoted the solution that seems to be working: But here's the gist.
Windows 8 (since it seems to be the most affected) move your cursor to the upper ight corner of your screen) and click on the Magnifying glass. Type in devmgmt.msc and this should bring up the Device Manager. Onc eyou are in the device manager, look for the "Portable device" or "Universial Serial bus Controller" list, and you should see the "Apple iPhone/iPad/iPod" listed. Onc eyou see it, right click it, choose "Update software driver." Now, IT WILL SAY THE DRIVER IS UPDATED. I CANNOT STRESS THIS ENOUGH. Select "Browse my computer for driver software." Onc eyou choose that, select "Let me pick from a lsit of drivers on my computer." You should see the option "Have Disk." Choose that. Again, I KNOW you do not have a physical disk, but the file we need is already on your computer. After Hard Disk, choose Browse again. Follow this file path to the file we need:C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.. In the Driver's folder, you should see the "usbaaple" or "usbappl64" (if you have the 64 bit for Windows). Double click on that file, and hit OK. The file should install, and once it's finished check your iTunes!!! You may want to unplug your device and plug it back it before doing all of this. I REALLY hope this works for you all as well!

Problem with oracle 10g express edition installation on linux(opensuse)

This is the error it give's me when i install the software. The error come after i set http port and the acces port to database
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora: No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora': No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora: No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora': No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/postDBCreation.sql: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/postDBCreation.sql': No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/DatabaseHomePage.sh: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/DatabaseHomePage.sh': No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/readonlinehelp.sh: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/readonlinehelp.sh': No such file or directory
Configuring Database...grep: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/*.log: No such file or directory
Done
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
Starting Oracle Database 10g Express Edition Instance...Done
Installation Completed Successfully.
To access the Database Home Page go to "http://127.0.0.1:8081/apex"
The files exists to the path who is looking for them and tell me they don't exist
can you help me please with this problem?
Thanks
Message was edited by:
user652409

hi,
i've reinstalled the database and now it give's me just the last 3 error messages,and i don't now what to do :
Configuring Database...grep: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/*.log: No such file or directory
Done
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
this files or directories doesn't exists...
Please help
Teero

Oracle Linux 6.3 with Oracle DB 11gR2 11.2.0.1.0 Installation issue

Trying to install Oracle Database 11gR2 version 11.2.0.1.0 on Oracle Linux 6.3
(11.2.0.1.0 is available for download from Oracle website)
I have run following also
su - root
yum install oracle-rdbms-server-11gr2-preinstall
But following packages are still not installed or missing and Installer cannot proceed.
Rest other checks have passed only following packages are still missing
libaio 0.3.105
libaio-devel 0.3.105 0.3.107
compat-libstdc++-33 3.2.3
libgcc 3.4.6 4.4.6
libstdc++ 3.4.6 4.4.6
unixODBC 2.2.11 2.2.14
unixODBC-devel 2.2.11 2.2.14
pdksh
Have tried yum install for above individual packages- packages not available. Why yum cannot find the above individual packages?

You cannot use OL 6.x since currently only 11.2.0.3 is certified to be installed on this OS - http://docs.oracle.com/cd/E11882_01/relnotes.112/e23558/toc.htm#CHDFHIEA
If you are going to use 11.2.0.1, you will need OL 5.x or another certified OS version - http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
HTH
Srini

JVM problem during Oracle8i installation on Redhat Linux 9

Hi there,
I was trying to install Oracle8i Release 2 (8.1.6) for Linux on P4-1.7Ghz pc running Redhat Linux9.
I created a new user and gave appropriate piviliges also.When i gave the ./runInstaller command it gave me the error as follows..
./runInstaller
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/bin/jre. Please wait...
[oracle@linux cdrom]$ /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/linux/native_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Can you kindly help me how to fix this issue...
Tons of thanks in advance..
With regards,
Prasad

Do this:
export LD_ASSUME_KERNEL=2.4.1

SAP R/3 4.7 EXt200 installation on RedHat Linux 5.2 with Oracle 10G

Similar Messages

Maybe you are looking for