Installation problem under AIX 5.3 with Oracle 10g
Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01 (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = 㠱㠱㠰â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis Porpodas
Hi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4 *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed rc = 2
|
| RSCP - Error
| Error from: Codepage handling (RSCP)
| code: 128 RSCPENOOBJ No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no: 2 line: 75 T100: TS008
| TSL01: CPV p3: Dummy-IPC p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.
Similar Messages
-
SAP R/3 4.7 EXt200 installation on RedHat Linux 5.2 with Oracle 10G
Hi,
I got this error during Database Instance Installation:
All file system node operations of table tORA_SapdataNodes processed successfully.
ERROR 2009-08-31 11:04:39 [iaxxinscbk.cpp:289]
abortInstallation
MDB-06020 File not found: [no oracle rdbms file found].
I am done with CI Installation.
Any help would be appreciated.Hi ,
First of all please check availability of your OS + DB requiremnts whether it is supported by SAP or not.You can check this at Product Availability Matrix at ::
http://service.sap.com/pam
If this support for your environment i.e.RedHat Linux 5.2 with Oracle 10G then be informed that after starting sapinst in step create database it will prompt you for installing your oracle DB. So open a new window & install your databse ,do the patching of your DB & then continue with sapinst after successfull installation of oracle.Rest of details sapinst will prompot you during instal;lation.
Hope this will guide you for your query.
Thanks..
Mohit -
HELP!!! Listener problem on AIX 4.1 with oracle 7.2.2.0
When I try to do "lnsrctl start" (or stop) the server give to me the error below:
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=ora7))
TNS-12224: TNS:no listener
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
IBM/AIX RISC System/6000 Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=TCP.world)(PROTOCOL=TCP)(Host=BILANCIO)(Port=1521))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
IBM/AIX RISC System/6000 Error: 79: Connection refused
Connecting to (ADDRESS=(COMMUNITY=TCP.world)(PROTOCOL=TCP)(Host=BILANCIO)(Port=1526))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
IBM/AIX RISC System/6000 Error: 79: Connection refused
On metalink, solutions are client side, but I have this problem on server side.
I try to change host name to ip add, but problem persist.
I try to reboot server (because I think the problem was the oracle istance) but the db works correctly.
What can I do?
thank u so much!!!
pedroHello Pedro,
Please can you tell me if you resolved this issue you were having and how did you resolve this. I am having the same issue now....
We did a restore to a different box and now cannot connect to the database and having same issues you described.
Your help will be appreciated,
Regards
Avishkar Bandu -
Installation of CRM 2007 in Windows with oracle and cluster environment
Dear Experts,
We are about to start the installation of CRM 2007 (ABAP+JAVA) with
Oracle 10g on Windows x64 in cluster environment. In the SAPINST dialog
box under High availability option, I could see installation options like ASCS
Instance, SCS Instance, First MSCS node, Database Instance, Additional
MSCS Node, Enqueue Replication Server, Central Instance and Dialog
Instance.
I have gone through the installation guide. I have below queries
regarding the same. Can you please clarify the same
1) Our requirement is we want to have an ACTIVE-ACTIVE cluster setup
with sap service running in Node A and Database running in Node B. Can
we have this setup in ABAP+JAVA setup
2) Also,in the SAPINST dialog box as said above except last two
(Central and Dialoge instance) as per standard installation guide are
to be installed in shared drives as per the requirement. But, central
and dialog are said to be installed locally on any one node in MSCS or
in separate server. As per my understanding Dialog instance will be
used for load balancing which we do not require now. Hence I feel this
is optional in our case. Where as Central Instance I am not able to
understand why this option is for? Is it mandatory to be installed or optional. If
so, when I installed it in one of the MSCS node the incase of failover
how does it effect the system. As per my understanding ASCS and SCS
comprise central instance.
Please clarify and thanks in advance.
Regards,
Sharath Babu M
+91-9003072891I am following as per the standard installation guide.
Regards
Sharath -
Installation problem with oracle 10g release 1 in RHEL ES 4 platform
Hi,
I am facing such a problem. I want to install Oracle 10g release 1.
I am using linux 86_64
os is RHEL ES 4 UPGRADE 5 X_86_64
When i put the command ./runInstaller It shows os is not supported.
Is there any way to install this oracle version.
Can u please suggest which version os is suitable for this.
please suggest.
Thanks & regardsWHICH 10gR1 software do you use? Oracle provides different versions, you need 10.1.0.3 for Linux x86-64 from the OTN download page.
By the way I would install 10gR2.
Werner -
Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server
Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animeshactualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus -
Question about SAP installation with Oracle 10g
I have successfully installed Oracle 10g on Windows server 2008 R2 64bit. I can connect to the database using mysql or through command prompt and run SQL commands.
I started installing the SAP EHP1 for SAP NetWeaver 7.0 ("51038620_13 BS 7 SR1 Installation Master Windows Server on x64 64bit") The installation goes very smooth. I choose the SAPSID and the DBSID sid, but then it gives an error stating to install oracle and continue or stop the installation & install Oracle. I have tried on continuing the installation since Oracle is already installed but I get the same message again and again.
Does it have to do with ORACLE 10g Sid. My Oracle SID is set to "ORCL" should it be the same as DBSID (during SAP Installation). Or the Oracle needs to be installed after SAP installation gets to the point for Oracle Installation. Please assist what needs to be changed. I can reinstall Oracle if needed. Any tips or comments would be nice.> Does it have to do with ORACLE 10g Sid. My Oracle SID is set to "ORCL" should it be the same as DBSID (during SAP Installation). Or the Oracle needs to be installed after SAP installation gets to the point for Oracle Installation.
You can't "change". You installed the Oracle software using "setup.exe" - which is wrong. You also created an example database - which is also not correct.
The Oracle software is installed, according to the installation guide, as
- start "sapserver.cmd" on the Oracle DVD (the SAP media)
- install the software according to the installation guide
- install the latest patchset
- install the latest PSU patch
--> and then start sapinst.
Markus -
Developer 5 with oracle 10g problem
the problem is that i can only run one instance from form5
that is mean if i have hrms system i can only run it one time form my pc and other pc and if i want run it i have to close the running one any ideaHi,
I have an application in - Front end tools : Oracle
Forms/Reports 4.5. RPT, SQL, and PROC(all are in
CUI-character user interface)
tabase : Oracle 7.3.4.
I have a plan for migrating database to 10g keeping
front-end as it is.
Is there any compatibility issue with forms 4.5(CUI)
with oracle 10g.
Regards
JIJUCharacter interface?? you mean Forms 3 not 4.5??
It will not work, you cannot directly migrate Oracle 7.3.4 to 10g, you need to migrate it first to 8.1.6 and than to 10g.
Even if you succeed in your database migration your front end version will not work.
Tony -
How to connect Forms 6i & Reports 6i with oracle 10g R2?
Hey everybody,
I need your help in connecting both Forms 6i & Reports 6i with Oracle 10g Release 2 db, MS Access(2003, 2007) and SQL database(Microsoft Visual Studio 2008). I am a newbie. I have installed all of them on my HP notebook, with Windows 7 Ultimate(32 bit OS) installed. I want to generate forms & reports by accessing data from above mentioned databases. Please provide me with the configuration steps.
Thanks in advance...!Welcome to the forum ;-)
Please be sure to review the following:
http://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
First, I think it would be a good idea if we can understand why you have chosen to use a nearly new operating system yet install Oracle products that are 10 years old (i.e. Forms/Reports 6i) on it. In general, this is not a good idea. Although running such an old version on Win7 can be made to work, the possibility of having problems is likely. If you are infact new to the product, using a configuration where you are likely to have problems may not be a good starting place. Also, you should be aware that Forms/Reports 6i was desupported several years ago. Documentation and other information is gradually being replaced by newer information, so resources for this old version are going away. The latest version of Forms/Reports is part of Fusion Middleware 11R2 (version 11.1.2.0) and requires WebLogic Server 10.3.5 (or 10.3.6) in order to be installed.
Second, if you decide to stick with F/R 6i, are you planning to run the applications you create in a browser or as a client/server application? This information is important because how you connect to a database will slightly differ depending on which option you choose. Also, if you want to connect to non-Oracle data sources you can use ODBC for client/server or Oracle Transparent Gateway. However, if you plan to deploy the applications using a browser, Gateway is your only option for connecting to non-Oracle datasources. As for connecting to MS Access, I believe ODBC is your only option, so web deployment may not be an option.
http://docs.oracle.com/cd/B19306_01/gateways.102/b14270/ch1.htm
There are many other references available. Try a Google search.
As for connecting to an Oracle database, this is generally easy. For the Builder(s) and client/server runtime to connect, add the db information to the tnsnames.ora found in the Oracle Home (installation directory) \network\admin. If you are unfamiliar with what goes in the file you can copy the entries created for your database. The db will have a similar file found in a similar place in its installation directory (Oracle Home). For example, you might find something like this:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = YOURSERVER.COM)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)Simply copy this information to the end of your tnsnames.ora found where Forms/Reports is installed then restart any running Forms or Builders. -
Sqlj runtime error with oracle 10G in Websphere6 or 5.1
We are trying to migrate from oracle 9i to 10G and we are compiled all our sqlj code with codegen = -oracle option.(previously we used to use codegen=-jdbc which for some reason doesnot work).it compiles fine with out any erros.. But when we try to run then get this exception.
java.lang.IllegalArgumentException: SQLJ programs translated with the option -codegen=oracle must be run under Oracle JDBC 9.0.0 or higher. If the Oracle JDBC driver is wrapped, then the wrapper must implement all of the oracle.jdbc.OracleXxxx interfaces. Alternatively, you can translate SQLJ programs either with -codegen=iso. java.lang.IllegalArgumentException: SQLJ programs translated with the option -codegen=oracle must be run under Oracle JDBC 9.0.0 or higher. If the Oracle JDBC driver is wrapped, then the wrapper must implement all of the oracle.jdbc.OracleXxxx interfaces. Alternatively, you can translate SQLJ programs either with -codegen=iso.
at sqlj.runtime.ref.ConnectionContextImpl.getOracleConnection(ConnectionContextImpl.java:167)
at sqlj.runtime.ExecutionContext$OracleContext.prepareOracleStatement(ExecutionContext.java:1397)
We are using ojdbc14.jar that came with oracle 10G.
Hope any one can give any pointers.I'm having same issue - but I'm having it when I try to invoke a method that contains a database Object type from a Tibco Business Works Process called a Java Method.
How exactly do you do the codegen=iso configuration?
I've tried:
1. Project Properties / Compiler SQLJ and then select from Code Generation drop down iso.
2. From Connections / Database / Navigate to package / right-click / Generate Java / Browse to my custom jpub.properties file where I have tried multiple entries such as (by themselves and in some combination.:
- jpub.codegen=jdbc
- jpub.codegen=iso
- jpub.compatible=9i
- jpub.compatible=8i
- compatible=both8i
- jpub.usertypes=oracle
- jpub.compatible=customdatum
- jpub.compatible=sqlj
I've also played with changing from the default some of the Mapping Options in Connections / Database / Navigate to package / right-click / Generate Java / Mapping Options.
This doc here, says that code should change (section 6 JPublisher Input Files - based on configuration of Input files)
Oracle® Database
JPublisher User's Guide
10g Release 2 (10.2)
B14188-01
No matter what I do, the code that gets generate is the same.
Also, the documentation talks about running things from the command line but how exactly do you do that? Do I need to be in specific directory? I tried the c:\ C:\jdev\system and c\jdev\ and c:jdev\bin and always get error message: 'jpub' is not recognized as an internal or external command, operable program or batch file.
I've built a java client in JDeveloper to successfully call the same method and I don't see the error.
Edited by: disaak on Mar 9, 2010 11:51 AM -
I am trying to connect oracle develper suit form with oracle 10g database
i am trying to connect oracle develper suit form with oracle 10g database
but when i pass username and password
this message apperars
ORA-12560:TNS:protocol adapter error
every time even i try to connect Report or Designer each time same problem
making no connection .
can any body help can help me to reslove this prblem
Arshad khanDuplicate thread:
Re: connection problem -
SunOneAppServ with Oracle 10g vers. 10.1.0.3.0
Hello,
I'm using two different versions of SunOneAppServer,
Sun Java System Application Server Enterprise Edition 8.1_02(build b19-p08) and
Sun Java System Application Server 7 2004Q2UR2.
These two instances of Application Servers work over two different databases, Oracle 8 and Oracle 10g vers. 10.1.0.3.0.
When working with Oracle 10 I get locks over some records during transactions and that transactions don't run correctly so the records remain locked and all following transactions go on waiting indefinitely or until I kill the session using toad.
Looking at the query locking the record it seems to me it's a query done by the application server.
Using the same software and making the same operation over the database with Oracle 8 this doesn't happen.
Does anyone has the same problem or knows how to solve it?
A collegue of mines told me that these versions of application servers doesn't support Oracle 10g. Is it true?Both versions of the appserver below will work with Oracle 10g.
There is not enough details as to asist with your problem, but it could well be a change in semantics for locking in 10g that is causing your issue -
Install Oracle 9i client on a computer with Oracle 10g Client
Hello all!!
I'm using a computer with Oracle 10g client, and I access two databases. One server has Oracle 10g server, and the other server has Oracle 9i server.
I want to install 9i client, to have it also in my computer. I haver read that I just have to install it in a different ORACLE_HOME, but I have a doubt.
If I install 9i client, would I be able to use the utilities, (exp, expddp, sqlldr) of both versions, or which version will be used in the command line for the utilities.
Thanks a lot!!!To start with, Home Selector is a "9i thing" (and older), in 10g there's the OUI -> Installed Products... -> Environment tab instead.
About the 9i dbca with other Oracle products installed. If you use launch.exe to start via dbca start menu shortcut, it uses ora92\assistants\dbca as working directory ("start from"). So when not looking for "numbered dlls" like oracore9.dll, a later/different version will be loaded if earlier in path, since loading goes through jre directories, ora92\assistants\dbca, then the dir's from path variable. From there it may start to link in libraries from different homes (on my laptop, "launch.exe dbca" uses files from 2 additional home paths!)
But, if you instead use dbca.bat started from ora92\bin, it will look in the right directories first and there's no dll mess-up. (But only when using the correct cwd!)
Plain and simple: stay very far away from multiple-general-home installs. It is possible to install allright, in different homes and all very nicely, but there will be pain when you decide to use the stuff (perhaps with sql*plus as the only exception, but I've run into bugs with that too).
Message was edited by:
orafad -
Oracle 11g compatibility with oracle 10g and 9i?
Hi All
I have some queries on 11g compatibility.
Is oracle 11g client compatible with oracle 10g client which is already installed on desktop?
If yes any changes to be done and where?
Is oracle 11g compatible with oracle 10g/9i on the same server where 10g/9i are installed?
RegardsThanks Justin Thats right ...
Problem elaboration is as follows
We currently have an application which requires oracle 10g(10.2.0.3) client to connect to database from user desktops. As
part of new application development the oracle 11g clients need to be installed on all the user deskotps.
The complete application software along with oracle client 11g has to be roled out on these desktop as part of
implementaion of new application besides the existing application(The application software is packaged along with oracle
10g client).
We would like to understand if there is any software provided by oracle using which we can switch between different oracle
versions while accessing the respective applications simultaneously. Also are there any known bugs/issues in running
oracle 10g client and oracle 11g client together on the same user desktops with different oracle homes? -
Symantec Antivirus with Oracle 10g
Hi,
I have successfully installed Oracle 10g personal database and developer suite in windows xp with 512 MB RAM and 2.66 Ghz processor.
The problem is that when I start my PC, it takes 2 min. to boot completely and the Symantec antivirus can not be enabled for a longer time (more than 10 min.)
Please tell me about the solution or any configuration settings.
Thanks & regards
Ghazi Shahnawaz.
email: [email protected]Thanks Justin Thats right ...
Problem elaboration is as follows
We currently have an application which requires oracle 10g(10.2.0.3) client to connect to database from user desktops. As
part of new application development the oracle 11g clients need to be installed on all the user deskotps.
The complete application software along with oracle client 11g has to be roled out on these desktop as part of
implementaion of new application besides the existing application(The application software is packaged along with oracle
10g client).
We would like to understand if there is any software provided by oracle using which we can switch between different oracle
versions while accessing the respective applications simultaneously. Also are there any known bugs/issues in running
oracle 10g client and oracle 11g client together on the same user desktops with different oracle homes?
Maybe you are looking for
-
Using servlet to generate XML file
What I want to do is simple but can't work. Hope you guys can give me a hint. I succesfully generate XML file in command line using Oracle XML parser and class generator. Then I was trying to do it using servlet. it compiles fine but generate NullPoi
-
I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted. is there a way to stop it in the middle so it does not go through the whole proce
-
F110 payment run - split on invoice line item that exceed certain amount
Dear expert, Now i want to ask is there any ways to configure F110 - payment run to auto checking on whenever the amount of one fi document is more than USD100,000 will auto split to second payment item. *i have already tick individual pmnt on tcode
-
How do we change the name of an album we are selling on iTunes ?
This may not be the right forum, but perhaps someone can point us in the right direction. We submitted a new CD through CDBaby to be distributed though iTunes. We were very excited to see it pop up when we searched for it. However, though the cover a
-
I've accidentally locked my used classic and don't know the password.
Does anyone know how I can access my Ipod? As it is used, I don't know if/what the previous password is. Can anyone help?