SAP Transportation error
Hi experts
We are having 2 system Landscape DEV & PRD, after releasing customizing request to RPD,we are unable find the changes, open the same request to see the few object i.e child request were missing in PRD, opened the same in DEV the child and parent request are available
Kindly suggest your valuable advise.
Regards
praveen
Dear Markus ,
Thanks for your reply, I am repeating the same with for clear understanding
this customizing request created and released, after releasing the request ( carries 5 objects in main task and 2 in Sub task)
from DEV to PRD , when we opened the same request after importing into PRD we found the main task objects are available but
the subtask or child task objects are missing, we tried recreating a new task and tried but still not working what is the problem
Hope this is clear?
regards
Praveen
Similar Messages
-
Hi,
I am getting a transport error 12 while importing a request.
Some transports are getting transported while some are not and are ending up with error 12.
Here are the slog
ERROR BD1K902473 BP1 R 0012 20100114030753
STOP tp_getprots BP1 R 20100114030809
STOP EXECUTION OF REPORTS BP1 R 20100114030810
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114030811
START imp single BP1 20100114030842
Regards,
VisshwasHere it is
STOP tp_getprots BP1 V 20100114002628 VENKATEV STRDS1502 20100114002456
STOP SET VERSION FLAGS BP1 V 20100114002629 VENKATEV STRDS1502 20100114002456
START EXECUTION OF REPORTS BP1 R 20100114002641 VENKATEV STRDS1502 20100114002456
START tp_getprots BP1 R 20100114002642 VENKATEV STRDS1502 20100114002456
STOP tp_getprots BP1 R 20100114002710 VENKATEV STRDS1502 20100114002456
STOP EXECUTION OF REPORTS BP1 R 20100114002711 VENKATEV STRDS1502 20100114002456
STOP imp single BP1 0008 20100114002712 VENKATEV STRDS1502 20100114002456
START INFORM SAP-SYSTEM OF BP1 Q 20100114002713 VENKATEV STRDS1502 20100114002456
START tp_getprots BP1 Q 20100114002713 VENKATEV STRDS1502 20100114002456
STOP tp_getprots BP1 Q 20100114002722 VENKATEV STRDS1502 20100114002456
STOP INFORM SAP-SYSTEM OF BP1 Q 20100114002723 VENKATEV STRDS1502 20100114002456
START imp single BP1 20100114004455 VENKATEV STRDS1502 20100114004453
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114004453
START MOVE NAMETABS BP1 6 20100114004457 VENKATEV STRDS1502 20100114004453
START tp_getprots BP1 P 20100114004458 VENKATEV STRDS1502 20100114004453
STOP tp_getprots BP1 P 20100114004500 VENKATEV STRDS1502 20100114004453
STOP MOVE NAMETABS BP1 6 20100114004501 VENKATEV STRDS1502 20100114004453
START MAIN IMPORT BP1 I 20100114004502 VENKATEV STRDS1502 20100114004453
STOP MAIN IMPORT BP1 I 20100114005903 VENKATEV STRDS1502 20100114004453
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114004453
START SET VERSION FLAGS BP1 V 20100114005908 VENKATEV STRDS1502 20100114004453
START tp_getprots BP1 V 20100114005911 VENKATEV STRDS1502 20100114004453
STOP tp_getprots BP1 V 20100114005936 VENKATEV STRDS1502 20100114004453
STOP SET VERSION FLAGS BP1 V 20100114005938 VENKATEV STRDS1502 20100114004453
START EXECUTION OF REPORTS BP1 R 20100114005947 VENKATEV STRDS1502 20100114004453
START tp_getprots BP1 R 20100114005949 VENKATEV STRDS1502 20100114004453
ERROR BD1K902473 BP1 R 0012 20100114010005 MANJUS VENKATEV STRDS1502 20100114004453
STOP tp_getprots BP1 R 20100114010041 VENKATEV STRDS1502 20100114004453
STOP EXECUTION OF REPORTS BP1 R 20100114010043 VENKATEV STRDS1502 20100114004453
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114010049 VENKATEV STRDS1502 20100114004453
START imp single BP1 20100114010856 VENKATEV STRDS1502 20100114010848
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114010848
START MOVE NAMETABS BP1 6 20100114010901 VENKATEV STRDS1502 20100114010848
START tp_getprots BP1 P 20100114010902 VENKATEV STRDS1502 20100114010848
STOP tp_getprots BP1 P 20100114010911 VENKATEV STRDS1502 20100114010848
STOP MOVE NAMETABS BP1 6 20100114010914 VENKATEV STRDS1502 20100114010848
START MAIN IMPORT BP1 I 20100114010917 VENKATEV STRDS1502 20100114010848
STOP MAIN IMPORT BP1 I 20100114011713 VENKATEV STRDS1502 20100114010848
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114010848
START SET VERSION FLAGS BP1 V 20100114011724 VENKATEV STRDS1502 20100114010848
START tp_getprots BP1 V 20100114011725 VENKATEV STRDS1502 20100114010848
STOP tp_getprots BP1 V 20100114011730 VENKATEV STRDS1502 20100114010848
STOP SET VERSION FLAGS BP1 V 20100114011731 VENKATEV STRDS1502 20100114010848
START EXECUTION OF REPORTS BP1 R 20100114011741 VENKATEV STRDS1502 20100114010848
START tp_getprots BP1 R 20100114011741 VENKATEV STRDS1502 20100114010848
ERROR BD1K902473 BP1 R 0012 20100114011757 MANJUS VENKATEV STRDS1502 20100114010848
STOP tp_getprots BP1 R 20100114011816 VENKATEV STRDS1502 20100114010848
STOP EXECUTION OF REPORTS BP1 R 20100114011817 VENKATEV STRDS1502 20100114010848
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114011819 VENKATEV STRDS1502 20100114010848
START imp single BP1 20100114013808 VENKATEV STRDS1502 20100114013757
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114013757
START MOVE NAMETABS BP1 6 20100114013813 VENKATEV STRDS1502 20100114013757
START tp_getprots BP1 P 20100114013820 VENKATEV STRDS1502 20100114013757
STOP tp_getprots BP1 P 20100114013827 VENKATEV STRDS1502 20100114013757
STOP MOVE NAMETABS BP1 6 20100114013830 VENKATEV STRDS1502 20100114013757
START MAIN IMPORT BP1 I 20100114013836 VENKATEV STRDS1502 20100114013757
STOP MAIN IMPORT BP1 I 20100114015151 VENKATEV STRDS1502 20100114013757
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114013757
START SET VERSION FLAGS BP1 V 20100114015157 VENKATEV STRDS1502 20100114013757
START tp_getprots BP1 V 20100114015200 VENKATEV STRDS1502 20100114013757
STOP tp_getprots BP1 V 20100114015211 VENKATEV STRDS1502 20100114013757
STOP SET VERSION FLAGS BP1 V 20100114015212 VENKATEV STRDS1502 20100114013757
START EXECUTION OF REPORTS BP1 R 20100114015216 VENKATEV STRDS1502 20100114013757
START tp_getprots BP1 R 20100114015217 VENKATEV STRDS1502 20100114013757
ERROR BD1K902473 BP1 R 0012 20100114015233 MANJUS VENKATEV STRDS1502 20100114013757
STOP tp_getprots BP1 R 20100114015253 VENKATEV STRDS1502 20100114013757
STOP EXECUTION OF REPORTS BP1 R 20100114015255 VENKATEV STRDS1502 20100114013757
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114015256 VENKATEV STRDS1502 20100114013757
START imp single BP1 20100114020600 VENKATEV STRDS1502 20100114020557
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114020557
START MOVE NAMETABS BP1 6 20100114020605 VENKATEV STRDS1502 20100114020557
START tp_getprots BP1 P 20100114020606 VENKATEV STRDS1502 20100114020557
STOP tp_getprots BP1 P 20100114020631 VENKATEV STRDS1502 20100114020557
STOP MOVE NAMETABS BP1 6 20100114020631 VENKATEV STRDS1502 20100114020557
START MAIN IMPORT BP1 I 20100114020634 VENKATEV STRDS1502 20100114020557
STOP MAIN IMPORT BP1 I 20100114021516 VENKATEV STRDS1502 20100114020557
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114020557
START SET VERSION FLAGS BP1 V 20100114021525 VENKATEV STRDS1502 20100114020557
START tp_getprots BP1 V 20100114021526 VENKATEV STRDS1502 20100114020557
STOP tp_getprots BP1 V 20100114021536 VENKATEV STRDS1502 20100114020557
STOP SET VERSION FLAGS BP1 V 20100114021536 VENKATEV STRDS1502 20100114020557
START EXECUTION OF REPORTS BP1 R 20100114021550 VENKATEV STRDS1502 20100114020557
START tp_getprots BP1 R 20100114021550 VENKATEV STRDS1502 20100114020557
ERROR BD1K902473 BP1 R 0012 20100114021757 MANJUS VENKATEV STRDS1502 20100114020557
STOP tp_getprots BP1 R 20100114021820 VENKATEV STRDS1502 20100114020557
STOP EXECUTION OF REPORTS BP1 R 20100114021820 VENKATEV STRDS1502 20100114020557
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114021822 VENKATEV STRDS1502 20100114020557
START imp single BP1 20100114025554 VENKATEV STRDS1502 20100114025552
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114025552
START MOVE NAMETABS BP1 6 20100114025559 VENKATEV STRDS1502 20100114025552
START tp_getprots BP1 P 20100114025600 VENKATEV STRDS1502 20100114025552
STOP tp_getprots BP1 P 20100114025613 VENKATEV STRDS1502 20100114025552
STOP MOVE NAMETABS BP1 6 20100114025613 VENKATEV STRDS1502 20100114025552
START MAIN IMPORT BP1 I 20100114025615 VENKATEV STRDS1502 20100114025552
STOP MAIN IMPORT BP1 I 20100114030423 VENKATEV STRDS1502 20100114025552
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114025552
START SET VERSION FLAGS BP1 V 20100114030432 VENKATEV STRDS1502 20100114025552
START tp_getprots BP1 V 20100114030433 VENKATEV STRDS1502 20100114025552
STOP tp_getprots BP1 V 20100114030438 VENKATEV STRDS1502 20100114025552
STOP SET VERSION FLAGS BP1 V 20100114030439 VENKATEV STRDS1502 20100114025552
START EXECUTION OF REPORTS BP1 R 20100114030447 VENKATEV STRDS1502 20100114025552
START tp_getprots BP1 R 20100114030448 VENKATEV STRDS1502 20100114025552
ERROR BD1K902473 BP1 R 0012 20100114030753 MANJUS VENKATEV STRDS1502 20100114025552
STOP tp_getprots BP1 R 20100114030809 VENKATEV STRDS1502 20100114025552
STOP EXECUTION OF REPORTS BP1 R 20100114030810 VENKATEV STRDS1502 20100114025552
ERROR: stopping on error 12 during EXECUTION OF REPORTS AFTER PUT
STOP imp single BP1 0012 20100114030811 VENKATEV STRDS1502 20100114025552
START imp single BP1 20100114030842 VENKATEV STRDS1502 20100114030839
INFO TBATG CONVERSION OF BP1 N not needed VENKATEV STRDS1502 20100114030839
START MOVE NAMETABS BP1 6 20100114030845 VENKATEV STRDS1502 20100114030839
START tp_getprots BP1 P 20100114030845 VENKATEV STRDS1502 20100114030839
STOP tp_getprots BP1 P 20100114030858 VENKATEV STRDS1502 20100114030839
STOP MOVE NAMETABS BP1 6 20100114030859 VENKATEV STRDS1502 20100114030839
START MAIN IMPORT BP1 I 20100114030901 VENKATEV STRDS1502 20100114030839
STOP MAIN IMPORT BP1 I 20100114030938 VENKATEV STRDS1502 20100114030839
INFO TBATG CREATION OF EN BP1 n not needed VENKATEV STRDS1502 20100114030839
START SET VERSION FLAGS BP1 V 20100114030951 VENKATEV STRDS1502 20100114030839
START tp_getprots BP1 V 20100114030952 VENKATEV STRDS1502 20100114030839
STOP tp_getprots BP1 V 20100114030956 VENKATEV STRDS1502 20100114030839
STOP SET VERSION FLAGS BP1 V 20100114030957 VENKATEV STRDS1502 20100114030839
START EXECUTION OF REPORTS BP1 R 20100114031008 VENKATEV STRDS1502 20100114030839
START tp_getprots BP1 R 20100114031009 VENKATEV STRDS1502 20100114030839
STOP tp_getprots BP1 R 20100114031020 VENKATEV STRDS1502 20100114030839
STOP EXECUTION OF REPORTS BP1 R 20100114031020 VENKATEV STRDS1502 20100114030839
STOP imp single BP1 0000 20100114031024 VENKATEV STRDS1502 20100114030839 -
Transport Error When dev to Quality
Transport Error on Quality System
Hi Gurus,
I can face an error when moving query in dev to quality,
Error when activating element 497HY34X0YTB2D1KDTUFYWP4I
Element 497HY3CLJXF0KZL0JNWS8YNUA is missing in version M
Element 497HY59QAKUE8MG206HURGCAA is missing in version M
Please send me your valuable suggestion,
Its very urgent,
ThanksDear,
Transporting queries is little different than transporting other objects..
Did you follow the right way..
Kindly check against :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Also see the discussion :
Query transport
Thanks -
Open Hub Destination - Transport Error
Hi,
Following error occured while transporting the Open Hub Destination(OHD) to QA.
Created OHD using Logical file as File type.
Syntax group: WINDOWS NT.
Transport Error Log:
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Activation Mode)
Application server bidwXXX does not exist.
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DEST L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
are we missing anything configuration here?
RegardsAnanda,
This is my file path in Dev:
D:\usr\sap\<SYSID>\DVEBMGS00\work\<FILENAME> in this path i have mentioned BWD instead of <SYSID> initially, it failed so i thought i would give a try by giving the parameter <SYSID> instead of BWD, even that failed.
When i have transported OHD with the path D:\usr\sap\<SYSID>\DVEBMGS00\work\<FILENAME> it was created in QA in the same directory as mentioned in Dev.So i believe i have the right file path in QA.
Thanks. -
Execution failed: Transport error: 401 Error: Unauthorized
Hi,
I'm trying to communicate via a web services from the workspace and I SUP 2.2 generates the following error "Execution failed: Transport error: 401 Error: Unauthorized".
Could someone guide me to solve this error.Hi Carlos,
Sometime back I faced an error says "error executed on backend server: connection timeout" while creating mbo using one publicly available web service and after passing proxy settings in workspace, it worked.
http://scn.sap.com/community/developer-center/mobility-platform/blog/2014/05/14/how-to-bypass-proxy-settings-in-smp-workspace-for-connecting-any-public-web-service-being-in-a-corporate-network
but error showing in the mentioned snapshot is much related to authorization. Btw are you able to access the web service URL in a browser? Asking any kind of authorization?
Rgrds,
JK -
Hi,
We deploying SAP CRM Sales 2.0 , we have generated ESDMA Bundles and deployed in SUP 2.0 and checked for the testing, unfortunate we getting 503 Transport Error , Please suggests.
Regards
ApsDear Aps,
Please check the JSPM and Default trace log to find whether SAP CRM Sales 2.0 software components are deployed properly or not.
Best Regards
Arun Jaiswal -
While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
Can someone help us in resolving this
Thanks and regards
RSPlease expand the log also please check the SAP note 1835436
Regards
Aneesh -
Hi All,
We are developing Report on SAP Payroll log with the error message . Is any table exist in SAP where we can get the standard error message repositery and then convert it in the User freindly error message ?
Thanks
HHello hg,
Before developing report on SAP Payroll error log I suggest taking a look at below blog. There is a new functionality from SAP to improve payroll data validation and they are calling it "Control Center Add-On".
This is going to be a free add on for anyone who is on EHP7 and NetWeaver on 7.4 release. The general availability is June 2nd 2014.
Improve payroll data validation with SAP Payroll control center add-on
Hope this helps.
Thanks,
Hemanth Jamithi. -
How to catch SAP application errors in BPM.
Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
BhargavHi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav -
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
Hello All,
Attached is the link explaining SAP Transportation Management Overview and a system demonstration of End to End Process Flow.
Link:
TM Overview + End to End Process Flow - YouTube
Thanks and best regards,
NavinVery Good Demo Navin
-
How to use the Variants in SAP Transportation and what is its use ?
Hi experts,
How to use the Variants in SAP Transportation and what is its use & How to create a variant in SAP ?
Can anybody answer this ?
Regards,
ShaktiHi,
If you are asking about "slection vairants" in SPRO settings of "shipment cost document" then
When it is activated,
each user can have his own slecetion and list criteria for
1. List shippment costs:calculation
2. List shippment costs: settlement
This can be directly saved from VI01 screen by the user.
from environment> lists
This is user specific only.
Hope this helps.
Regards,
Sharan -
Error while printing (SAP spool error)
Hi,
I have configured a printer of type 'C : Direct Operating System Call'. On printing a page, an error occurs with the following log entries
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 1775: "A null context handle was passed from the client to the host during a remote procedure call."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Please. can someone help me out here.
Thanks!
Regards,
AngadOk I am upgrading from R/3 46C to ECC 6.0, on the 46c system the printers are configured as follow:
Device type HPLJ4 : HP Laserjet 4 series
Spool server sapprod1_PRD_00 sapprod1
Device class Standard printer
Host spool access method C: Direct operating system call
Host printer
srtroot03.startek.com\srt-dc-c4-sharp
Host name sapprod1
On the ECC 6.0 system the printers are configured as follows:
Device Type HPLJ4 : HP Laserjet 4 series
Spool Server srtsapeccdev1_DEV_00
Server Description
Host srtsapeccdev1
Device Class Standard printer
Host Spool Access Method C: Direct operating system call
Host printer
srtroot03.startek.co\srt-dc-c4-sharp
HostName srtsapeccdev1
The 46c system prints just fine, on the ECC 6.0 systems; I can not get the printers to work. I have made sure that the hosts file on the ECC server has the printer host address, and I get the following error back:
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 5 [
srtroot03.startek.com\srt-dc-c4-sharp]: "Access is denied."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
The access to the Printer Host is wide open, what do I need to do to resolve this issue. -
Transport error while exporting swf to enterprise
Hi all,
OLD scenario : Server OS : Windows2003, BO XI3.1 Client OS : Windows XP , all BO lcient tools and Xcelsius 2008 ..system works fine in all respects
New Scenario : Server OS upgraded to Windows 2008 with out doing any modifications on the running applicaitions.
All client tools are able to connect to BO Application including designer, deski , importwizrd, webirichclient with EXCEPTION Xelcius 2008.
In Xcelsius 2008 with SP1 --> while tring to export to Business objects platform, upon giving username and password and authenticationi (any) ...waits for 3-4 sec ...pops up " Transport Error : Communication Failure" .... same error while importing also ..application is not getting response from server ...
pls guide ...thnx ..
.kishoreSorry for delayed update .The Issue is resolved after un-checking auto assign port to CMS and assigning port number manually.
-
No transport error while consuming WCF service in a REST way
Hi,
Here is a small article on when we usually face No Transport error and how to get rid of it.
I recently worked on a sample application using “app for Office” (New in Visual Studio 11.0)
What is “app for Office”?
An app for Office is basically a webpage that is hosted inside an Office client application. You can use apps to extend the functionality of a document, email message, meeting request, or appointment. Apps
can run in multiple environments and clients, including rich Office desktop clients, Office Web Apps, mobile browsers, and also on-premises and in the cloud.
What can an app for Office do?
An app for Office can do pretty much anything a webpage can do inside the browser, such as the following:
Provide an interactive UI and custom logic through JavaScript. (Develop UI using HTML and JavaScript)
Use JavaScript frameworks such as jQuery.
Connect to REST endpoints and web services via HTTP and AJAX.
Run server-side code or logic, if the page is implemented using a server-side scripting language such as ASP or PHP.
As “app for Office” doesn’t have an option to write server side scripting (unlike code behind or in-line coding feature in ASP.NET/MVC) we will have to go for web service or WCF service and consume the service
using any JavaScript framework like Jquery.
I wrote a simple WCF service to hook up with server side code and consumed the service using Jquery as follows
$(document).ready(function () {
$.ajax({
type: "GET",
url: "http://localhost/MyService.svc/rh/data?id=" + $('#sampleType').val(),
processData: false,
contentType: "application/json; charset=utf-8",
dataType: "json",
crossDomain: true,
success: function (data) {
alert(data)
error: function (xhr, status, error) {
alert(error);
I encountered an error saying “No Transport” when I executed the client application.
I did some investigation on this and found out the root cause that cross-domain request was disabled. But I was really not sure whether it was at my WCF service end or “app for Office” client end. I added
Client Access policy and Cross-domain-policy xml files to WCF service in order to enable cross-domain request
so that service will accept any type requests sent form different domains.
Client Access policy
<?xml version="1.0" encoding="utf-8" ?>
<access-policy>
<cross-domain-access>
<policy>
<allow-from http-request-headers="*">
<domain uri="*"/>
</allow-from>
<grant-to>
<resource include-subpaths="true" path="/"/>
</grant-to>
</policy>
</cross-domain-access>
</access-policy>
Cross-domain-policy
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-http-request-headers-from domain="*" headers="*"/>
</cross-domain-policy>
Both the policies should be in different XML files
But this didn’t solve my problem. After a little bit more investigation I found exactly where and how to enable-cross domain requests.
Solution
We need to enable cross-domain requests in environments that do not support cross-domain requests.
“Cors is equal to true if a browser can create an XMLHttpRequest object and if thatXMLHttpRequest
object has a withCredentials property. To enable cross-domain requests in environments that do not support cors yet but do allow cross-domain XHRrequests (windows gadget, etc), set $.support.cors = true;”
You just have to add jQuery.support.cors = true; in your client scripting and it works perfectly fine.
[Cors- Cross-Origin Resource Sharing]
A simple example:
$.support.cors = true;
$(document).ready(function () {
$.ajax({
type: "GET",
url: "http://localhost/MyService.svc/rh/data?id=" + $('#sampleType').val(),
processData: false,
contentType: "application/json; charset=utf-8",
dataType: "json",
crossDomain: true,
success: function (data) {
alert(data)
error: function (xhr, status, error) {
alert(error);
Hope this will be helpful.
ThanksThis is very good technich to resolve the problem. but this is not working in Google chrome or Firfox . can any one help me.
Maybe you are looking for
-
How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTun
-
I could really use some help. I'm trying to record an audio book of my second novel. I had about 300 audio tracks from recording the book in iTunes. I put them all in a playlist. Then I went through and delected the tracks that were no good from the
-
Hi Friends, I am new to EJB, ANT and Weblogic - so need a help from you. I want to run a simple session bean on weblogic 8 but want to deploy using ant along with my other servlets and jsp's, please point to simple tutorials. I have some basic questi
-
Trying to get contacts from Blackberry Pearl 8230 to iPhone 4
Since the Blackberry Pearl doesn't offer Backup Assistant, I have my contacts backed up on the Blackberry Desktop Software program. Any idea how I can get them onto my new iPhone 4? I have not previously used a contact management software program an
-
Look for JDeveoper 10g Web Services Samples
We would like to use JDeveloper 10g to create Web Services and create JSP pages to use them. If you know a good starting point or where I can find examples, please let me know. I have found some for 9i, but I hope 10g will make the job easier. Thanks