Sapcar error
hello everyone
i am facing the problem in sapcar please provide me the solution
SAPCAR -xvf DBATL700O10_48-20001000.SAR
SAPCAR: processing archive DBATL700O10_48-20001000.SAR (version 2.01)
x brarchive
SAPCAR: could not open for writing brarchive (error 28). Permission denied
thanks
Hi
First take backup of the existing run folder to oldrun
now, copy the existing SAPCAR file to another location like /home/tmp/SAPCAR
also remane saposcol to saposcol.tmpold
now, extract the SAPEXE file on /home/tmp/SAPCAR from the /usr/sap/<SID>/SYS/exe/run directory.
I hope this helps..
Cheers
Similar Messages
-
SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
Hi,
I´m trying to decompress this file( is for a kernel upgrade):
SAPEXE_15-10006264.SAR
And when I do SAPCAR u2013xvf SAPEXE_15-10006264.SAR, SAPCAR only decompress a few files and I´ve this error:
SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
Instead when I decompress the SAPEXEDB_15-10006263.SAR, SAPCAR does this correctly. I´ve tried to download again the file but the error is always the same.Could someone help me?
Best regards,Hi,
Now, I´ve unpacked the files but when I do the file copy (in order to upgrade the kernel), I´ve these errors:
cp: cannot create /usr/sap/SMD/exe/jcontrol: Text file busy
cp: cannot create /usr/sap/SMD/exe/jlaunch: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicudata.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicui18n.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/libicuuc.sl.30: Text file busy
cp: cannot create /usr/sap/SMD/exe/sapstart: Text file busy
cp: cannot create /usr/sap/SMD/exe/sapstartsrv: Text file busy
So could you help me?
Best regards, -
Hi experts
Am trying to apply SPS to our EP 7.0 portal. So I downloaded the files from SMP and dumped them into /usr/sap/trans/EPS/in directory including the SAPCAR file. I renamed the SAPCAR_XXX(some file name ) to SAPCAR.
I am getting errors while trying to uncar some SAR files. SAPCAR itself resides in /EPS/in
SAPCAR -xvf SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: could not open for writing R3ldctl (error 28). Permission denied
If i try it from EPS directory
usr/sap/trans/EPS >> SAPCAR -xvf /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: error in GetEntryData(); unknown block type (error 100). No such file or directory
All the SAR files have 777 permision.
Please advise .Hi,
Am trying to apply SPS to our EP 7.0 portal
you are trying to apply support package on EP 7.0 for that you should use JSPM.
SAPEXEDB_114-20000979.SAR is a kernel file. why are you extract it in /eps/in ???
SAPCAR -xvf SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: could not open for writing R3ldctl (error 28). Permission denied
for this error check sap not Note 130683 - SAPCAR, CAR can't query current working directory
regards,
kaushal -
SAPCAR error reading from UCKx6464bit/KUWINDOWSX86_64/DBINDEP/SAPEXE(error5
Hello everyone,
I am facing trouble with Solman 7.0 installation on windows 2003 Enterprise SP1/ Oracle 10.2.0.2. It stops at ADS User password stage & shows up the error popup. When I check the logs I get the following error. Tried investigating in the notes & SDN network for know issues but to no success. Tried starting from scratch by reinstalling OS, DB then SAPinst, but hit the same issue. I tried extracting SAPEXE.SAR using SAPCAR it gives the error. "
SAPCAR: could not open for writing sapcar.exe (error 28). The process cannot access the file because it is being used by another process."
It looks like SAPCAR is being use If anyone has faced this issue and can share some light on it I shall be great full.
+INFO 2011-07-10 13:45:32.203+
+Output of C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.748.1310275892\SAPCAR.exe -t -v -g -i -s -f Z:/UCKx6464bit\KU_WINDOWS_X86_64\DBINDEP/SAPEXE.SAR, sapstart.exe:+
+SAPCAR: processing archive Z:/UCKx6464bit/KU_WINDOWS_X86_64/DBINDEP/SAPEXE.SAR (version 2.01)+
+-rwx------ 596776 24 Jan 2008 08:58 sapstart.exe+
+The extraction requires approximately...+
++ 583 KB in C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS++
+INFO 2011-07-10 13:45:32.390+
+Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\SAPEXE.log.+
+INFO 2011-07-10 13:45:32.453+
+Output of C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.748.1310275892\SAPCAR.exe is written to the logfile SAPEXE.log.+
+INFO 2011-07-10 13:46:00.078+
+Output of C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.748.1310275892\SAPCAR.exe -x -v -g -i -R DBINDEP/SAPEXE.SAR -f Z:/UCKx6464bit\KU_WINDOWS_X86_64\DBINDEP/SAPEXE.SAR, sapstart.exe:+
+SAPCAR: processing archive Z:/UCKx6464bit/KU_WINDOWS_X86_64/DBINDEP/SAPEXE.SAR (version 2.01)+
+SAPCAR: error reading from Z:/UCKx6464bit/KU_WINDOWS_X86_64/DBINDEP/SAPEXE.SAR (error 5).+
+WARNING[E] 2011-07-10 13:46:00.078+
+MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.748.1310275892\SAPCAR.exe -x -v -g -i -R DBINDEP/SAPEXE.SAR -f Z:/UCKx6464bit\KU_WINDOWS_X86_64\DBINDEP/SAPEXE.SAR, sapstart.exe" finished with return code 5. Output:+
+SAPCAR: processing archive Z:/UCKx6464bit/KU_WINDOWS_X86_64/DBINDEP/SAPEXE.SAR (version 2.01)+
+SAPCAR: error reading from Z:/UCKx6464bit/KU_WINDOWS_X86_64/DBINDEP/SAPEXE.SAR (error 5).+
+WARNING[E] 2011-07-10 13:46:00.078+
+MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.748.1310275892\SAPCAR.exe -x -v -g -i -R DBINDEP/SAPEXE.SAR -f Z:/UCKx6464bit\KU_WINDOWS_X86_64\DBINDEP/SAPEXE.SAR, sapstart.exe" finished with return code 5. Output:+
+SAPCAR: processing archive Z:/UCKx6464bit/KU_WINDOWS_X86_64/DBINDEP/SAPEXE.SAR (version 2.01)+
+SAPCAR: error reading from Z:/UCKx6464bit/KU_WINDOWS_X86_64/DBINDEP/SAPEXE.SAR (error 5).+
+ERROR 2011-07-10 13:46:00.93+
+FCO-00011 The step initSIDAndNumber with step key |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0|initSIDAndNumber was executed with status ERROR .+
Thanks & Regards
gabbasis
Edited by: gab basis on Jul 10, 2009 11:49 AMHi,
The problem is that you are using the file SAPCAR.EXE for uncompromising the kernel that you have downloaded from market place.
at the time of uncompression a new SAPCAR.EXE file is generated and it want to replace the existing file but that is being used for the uncomression. therefore you get that error.
please change the existing file say SAPCAR1.exe and then try again. it will work fine.
Shivendra Singh Yadav -
Hi experts
Am trying to apply SPS to our EP 7.0 portal. So I downloaded the files from SMP and dumped them into /usr/sap/trans/EPS/in directory including the SAPCAR file. I renamed the SAPCAR_XXX(some file name ) to SAPCAR.
I am getting errors while trying to uncar some SAR files. SAPCAR itself resides in /EPS/in
>SAPCAR -xvf SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: could not open for writing R3ldctl (error 28). Permission denied
If i try it from EPS directory
usr/sap/trans/EPS >> SAPCAR -xvf /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: error in GetEntryData(); unknown block type (error 100). No such file or directory
All the SAR files have 777 permision.
Please advise .Hi,
Am trying to apply SPS to our EP 7.0 portal
you are trying to apply support package on EP 7.0 for that you should use JSPM.
SAPEXEDB_114-20000979.SAR is a kernel file. why are you extract it in /eps/in ???
SAPCAR -xvf SAPEXEDB_114-20000979.SAR
SAPCAR: processing archive /usr/sap/trans/EPS/in/SAPEXEDB_114-20000979.SAR (version 2.01)
x R3ldctl
SAPCAR: could not open for writing R3ldctl (error 28). Permission denied
for this error check sap not Note 130683 - SAPCAR, CAR can't query current working directory
regards,
kaushal -
SAPCAR error "Illegal byte sequence "
Hi there
I am trying to update R3trans and tp programs and ran into this error uncarring the files using sapcar.
110> SAPCAR -xvf tp_193-20000233.sar
stderr initialized
processing archive tp_193-20000233.sar...
Illegal byte sequence tp_193-20000233.sar
119> SAPCAR -xvf R3trans_205-20000233.SAR
stderr initialized
processing archive R3trans_205-20000233.SAR...
Illegal byte sequence R3trans_205-20000233.SAR
I tried downloading the latest sapcar after referring to
Note 892842 - SAPCAR error: format error in header,
but had no luck.I would appreciate any help on this.
Thanks
VicIf you want to upgrade SAPCAR , replace the SAPCAR in exe directory.
execute the following command
which SAPCAR
this will show you the path.
For windows , renameing to .zip doesnt help. download the SAPCAR ( the name is same for all OS ) from
service.sap.com/patches --> Entry by Application Group --> Additional Components --> SAPCAR then windows.
if its downloaded to C drive
c:\ sapcar.exe -xvf < *.SAR > , < *.SAR > is your tp/r3trans
Thanks
Prince Jose -
SAPCAR error for saprouter installation
Error message when uncar Saprouter package
csppsm01:ssmadm 4> SAPCAR -xvf saprouter_1-20002350.sar
SAPCAR: processing archive saprouter_1-20002350.sar (version 2.01)
x niping
SAPCAR: could not open for writing niping (error 28). Permission denied
csppsm01:ssmadm 15> SAPCAR -tvf saprouter_1-20002350.sar
SAPCAR: processing archive saprouter_1-20002350.sar (version 2.01)
-rwxrwxr-x 5509492 05 Aug 2007 21:03 niping
-rwxrwxr-x 6119281 09 Aug 2007 20:47 saprouter
Thanks
Eric
EricHello Eric,
Please refer to SAP Note 130683.
Make sure the sidadm has rwx persmissions on the file being uncarred and all the files in the directory where SAPCAR resides including . and .. (. & .. are usually hidden)
Hope that helps.
Regards,
Snehal -
SAPCAR error when extracting kernel patches
Hi gurus
I am having the following error when extracting so kernel patches:
SAPCAR could not open for writing sapcar.exe <error 28>.The process cannot acces the file becaues it is being used by another process.
Maybe its saying that because sapcar is the on that is extracting this patch an now it cant open it.i have followed not 211077 but still not winning.
on Windows2k3 64bit
Any ideas welcomeyou can rename the sapcar.exe to oldsapcar.exe and execute oldsapcar.exe
or you can move to a different directory and execute from there. -
Error in Netweaver Mobile 7.1 Installation
Hi All
I am trying to install NW Mobile 7.1 on MS SQL server 2005 with Windows 2008 Enterprise Edition O.S.
I used a new version of the SAPinst and the pre-requisites checker .xml file since the downloaded versions are from 2007.
I am facing an error as such-
INFO 2013-02-04 10:22:00.774
Creating file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\MSS\STD\AS-ABAP\SAPHOSTAGENT.log.
INFO 2013-02-04 10:22:00.779
Output of C:\Users\ADMINI~1\AppData\Local\Temp\2\sapinst_exe.2284.1359972341\SAPCAR.exe is written to the logfile SAPHOSTAGENT.log.
INFO 2013-02-04 10:22:00.806
Output of C:\Users\ADMINI~1\AppData\Local\Temp\2\sapinst_exe.2284.1359972341\SAPCAR.exe -x -v -i -R ./hostagent -f "D:/NW 7.1 KERNEL 7.10 WINDOWS (IA64, X86), LINUX X86_64 19 (51033247)/DATA_UNITS/K_710_UI_WINDOWS_X86_64/DBINDEP/SAPHOSTAGENT.SAR,":
SAPCAR: error opening D:/NW 7.1 KERNEL 7.10 WINDOWS (IA64 (error 6). The system cannot find the file specified.
SAPCAR: 0 file(s) extracted
SAPCAR: error opening X86) (error 6). The system cannot find the file specified.
It seems the system is unable to find a SAPCAR file in the folder specified above.
I have placed a new SAPCAR file and also extracted the SAPHOSTAGENT.SARf file and tried to continue but to no avail.
Please let me know how to continue with the installation and finish it.
Thanks in advance.
Phani.hello,
please check and ensure that:
- your database server is started.
- your database instance is running and you can connect to it through the network interface
- the entries in secure store contain the correct options for
connecting to the database. (These can be checked via configtool and this only applies to the case when JLoad is run using secure store parameters)
hope this helps
kr,
andreas -
Hi, All
I have a hard time in installing NWDS.
Actually, I got <b>'JIDE15_0-10002804.sar'</b> and '<b>SAPCAR</b>' files from my co-worker.
I saved these two files in C drive, and typed 'sapcar -xvf JIDE15_0-10002804.sar' at DOS prompt. But, I got error messages.
The first error message is <b>'Could not open the ICU common library'</b>.
So, I added <b>'icudt26l.dll','icuin26.dll','icuuc26.dll'</b> into system32 folder.
After that, the second error message is "<b>Could not open libsapu16vc71.dll</b>". So, I added it into system32 again.
Finally, I did run it again and got the third error message.
I got this: " <b>SAPCAR: error opening JIDE15_0-10002804.sar
SAPCAR: 0 file(S) extracted</b>"
Now, there is nothing I can do.
Does anybody have any idea to solve this problem?
Message was edited by: wookjin sa
Message was edited by: wookjin saHi,
this may be a prudent solution, but this saved me good time.
i tried the extracting on my machine and i was confronted with the error. i moved the sar file to my colleagues machine and extracted and it worked.
probably you can check extracting on a different machine.
Regards,
S.Divakar -
PI 7.0 Installation Error
Dears,
We are installing PI 7.0 on Oracle 10g on AIX 6.1
I am getting below error in step Install Database Server Software:
database/Disk1/stage/Components/oracle.rdbms.hybrid/10.1.0.1.0/1/DataFiles/group.jar
x database/Disk1/stage/Components/oracle.rsf.hybrid
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1/DataFiles
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1/DataFiles/bin.jar
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1/DataFiles/group.jar
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1/DataFiles/eelib.1.1.jar
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1/DataFiles/stdlib.1.1.jar
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1/DataFiles/group_fix.jar
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1/DataFiles/group_new.1.1.jar
x database/Disk1/stage/Components/oracle.rsf.hybrid/10.2.0.0.0/1/DataFiles/group_new.jar
SAPCAR: error reading from /software/Database-Oracle-1_of_2/OR110264.SAR (error 5).
I have checked that this file OR110264.SAR exist there have permissions
-r-xr-xr-x 1 root system 1073741312 Aug 17 13:26 OR110264.SAR
I am working with root,Please suggest what could be possible reason of this error.
Regards,
ShivamHi!
To be sure try to unpack file OR110264.SAR manually using SAPCAR.
If this also fails, this file is currupted. Then download fresh installation source form SMP ( https://service.sap.com/swdc ) - at least the database part.
By the way: Please ensure to always use the latest version of SAPCAR.
Hope this helps!
Regards,
Volker -
SAINT error in phase DISASSEMBLE
Hi,
I am performing Delta-upgrade of component ST-SER from 700_2007_1 to 700_2008_1 via SAINT on our Solution Manager 4.0 system. (Windows server 2003 / MS SQL)
The SAR archive (KITLONB.SAR) is of 141 MB.
while trying to uncar i get following message:
SAPCAR: processing archive D:\SPS17\ST-SER_2008\Inst\KITLONB.SAR (version 2.01)
x EPS/in/CSR0120031469_0029513.ATT
x EPS/in/CSR0120031469_0029513.PAT
SAPCAR: error reading from D:\SPS17\ST-SER_2008\Inst\KITLONB.SAR
But the EPS files have been loaded in the system & visible in the queue as well.
The import fails in phase DISASSEMBLE with following error:
Error in phase - DISASSEMBLE
Reason for error - PATCH_FILE_READ_ERROR
Return code - 12
Error message - OCS Package : SAPKITLONB
File has Full Control given to groups Administrator, SAP_LocalAdmin and SYSTEM.
What could be the reason?Check your SAPCAR executable.
File hasn't been uncared properly. You may uncar on your desktop and then transfer to server.
Other option is to load from SAINT tool > Load > Package from Application Server > Give location and it will uncar at right place.
Thanks,
Digesh
Edited by: digeshjoshi on Aug 14, 2009 5:01 PM -
DB Startup failed;terminating with error code 12
Hi Friends,
The system is at kernel patch 75,so I was applying the kernel patches by extracting the .SAR files into the /usr/sap/
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 Wed Jan 2 19:28:44 2008 348 0.000348
4 ETW000 db_con_init called 30 0.000378
4 ETW000 create_con (con_name=R/3) 78 0.000456
4 ETW000 Loading DB library '/usr/sap/SDV/SYS/exe/run/dboraslib.so' ...
4 ETW000 65 0.000521
4 ETW000 load shared library (/usr/sap/SDV/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 50079 0.050600
4 ETW000 Library '/usr/sap/SDV/SYS/exe/run/dboraslib.so' loaded
4 ETW000 80 0.050680
4 ETW000 function DbSlExpFuns loaded from library /usr/sap/SDV/SYS/exe/run/dboraslib.so
4 ETW000 94 0.050774
4 ETW000 *** ERROR => Version mismatch between kernel (700.08) and DBSL shared library (ЯÐÛСÅÌ)
4 ETW000 200 0.050974
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SDV/SYS/exe/run') or dbms_type ('ORA')"
So,the DB is unable to start & as a result,SAP system isn't available.
Request your help.
Thanks
SandipanHello Sandipan,
>> SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
At first try to extract the SAR archives into /sapmnt/<SID>/exe, because of /usr/sap/<SID>/SYS/exe is just a symbolic link and maybe the permissions are different (maybe you have checked the link with 777).
Please try the following:
> mv /sapmnt/<SID>/exe /sapmnt/<SID>/exe.old
> SAPCAR -xvf <PATCH LOCATION> /sapmnt/<SID>/exe
After that run the saproot.sh script in /sapmnt/<SID>/exe and try to start the sap system.
Normally the error 28 shows some files which have the problems (maybe loaded or still open), if it is a library (*.a, *.so files) then execute the following command as root:
> slibclean
Regards
Stefan -
Dear Friends,
I am trying to update my brtools patch level.I download DBATL640O92_48-20000198.SAR file
.but when i am trying to extract this file ,i get a message
+ FORMAT ERROR IN HEADER+
After that i update my SAPCAR tool, than it gives
an error
program is to big
But i have more than 30 G.B free space
Thanks & Regards
GopalHi Jacob,
I download the file succesfully. And i have also Update a my SAPCAR tool. Now i am trying to extract the file DBATL640O92_48-20000198.SAR than it gives a error
+tegaprd:prdadm 6> SAPCAR -xvf /usr/sap/tmp/DBATL640O92_48-20000198.SAR
SAPCAR: error opening /usr/sap/tmp/DBATL640O92_48-20000198.SAR
SAPCAR: 0 file(s) extracted+
I placed this file in usr/sap/tmp than now tell me that path is given by me is wrong.
I am giving a path.
#tegaprd:prdadm 6>cd /usr/sap/PRD/SYS/exe/run
tegaprd:prdadm 6>SAPCAR -xvf /usr/sap/tmp/DBATL640O92_48-20000198.SAR
Please tell me where am i wrong.
i am working on AIX operating System
Thanks & Regards
gopal
Edited by: gopal kaushik on May 6, 2008 7:35 AM -
Spacar error says format error in header
Hello ,
I was executing the command sapcar -xvf K-1507DINSTPL.SAR I get an error saying there is a format error in header.
What do I do.
Thanks
DruvaHi Debasis & Vamsi,
Thank you for the help and suggestions.
I just had a look at the thread after solving the problem.
Actually I had the solution in the PDF that I was suggested to read when I updated SPAM from 700/0023 to 700/0030.
Debasis I came across the same thing which is as follows
"SAPCAR error: format error in header" when extracting
an SAR archive
Symptom: When you unpack an SAR archive, the SAPCAR utility
terminates with the error message "SAPCAR error: format error in
header".
Reason: The SAR archive was packed using SAPCAR Version 700. Since
changes were made to the SAR archive format in this version, older
SAPCAR versions can no longer unpack the archive (also refer to SAP
Note 892842).
Solution: Use SAPCAR Version 700 or SAPCAR Version 640 patch level
4. These versions can process the new archive format (refer to SAP
Note 892842).
Thankyou
Druva
Maybe you are looking for
-
Certain songs won't play on devices
I have an iphone 5 and an older ipod colour 30gb. Recently the iphone wouldn't get new songs added to it during syncing with itunes. I removed all music then readded it. It now has all songs displayed on it, but will only play some. The ones which do
-
Outlook 2010 Contact Card (View more options to interact with this person)
When I double click on a contact, and hover over their email address to "View more ways to interact with this person" - the box shows nothing. This is consistent with all of my contacts, and this is happening to every user at our site - I think it mi
-
Regarding an error while creating RFC Funciton
Hello experts: First Thank you in advance for all your replies. I created an RFC function, checking passed , but failed to activate it. a message says that REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
-
Using custom tables in jdeveloper
Hi, I've created a custom table using toad. I created the table in applsys and created a synonym to apps. I've also grant all the priveledges to apps as well. However, when I create a query OA to query a standard table eg. PER_ALL_PEOPLE_F, I have no
-
HT1338 get new mail in all accounts button doesn't work
Clicking on the 'get new mail in all accounts' button in Mail doesn't work (after a few seconds it beeps). I have to close the app and re-open to receive mail. I also have my account setup to automaticaly receive every 1 minute, but that doesn't wor