SAPconnect Internet Mail Status Problem

I configured BI 7.0 SAPconnect for sending internet email. I receive the mail in outlook just fine. The problem is in the status field. All messages have status of sent. I would like to know what configuration is missing so I can receive status transmitted.
Thank You in advance

Martin,
You can go through the note 1033893 .
It would help you to resolve the issue

Similar Messages

TS3276 Internet Mail Delivery Problem

I have been getting "Internet Delivery Problem" on my email since midnight last night. All my email is coming through, accompanied by the above message, and all messages are going out. I don't see how to fix this. Any suggestions? I am on iCloud and went to Connection Doctor, and it said everything was fine!

Seems to not be system-wide. My husbands .mac account is behaving just fine.
Just curious, did anyone having problems also lose service a while back? If I understood what happened correctly, Apple had one big server center go down and I lost email for a couple of days but my husband didn't. So he's located on a different server than mine. Everyone seems randomly assigned since the outage was world-wide, and just those routed out of this one location lost service. Took them a while to acknowledge the issue, since it wasn't everyone. Curious if this is affecting the same people?

Why, all of a sudden, can't I download documents from websites or e-mail attachments when I can do this on Internet Explorer without problems?

When I try to download a spreadsheet, document, or other item from a website, using either run or save, everything freezes up and no download occurs. Or sometimes the item will download in a nonsense jumble of numbers and letters. The same thing happens when I try to download an e-mail attachment from someone. Thing is, I can do all these things from Internet Explorer without problems. This has only happened within the past couple of months. Before that, I had no problems . What's happening?

That's right; openbox-session worked.
Edit: Here's eventually bspwmrc, but there shouldn't be anything wrong.
#! /bin/sh
bspc rule -a Steam follow=on
bspc rule -a Eclipse floating=on
bspc rule -a virtualbox floating=on
bspc rule -a pavucontrol floating=on
bspc rule -a Firefox floating=on
bspc rule -a xpad floating=on
bspc config border_width 4
bspc config window_gap 5
bspc config split_ratio 0.5
bspc config borderless_monocle true
bspc config gapless_monocle true
bspc config focused_border_color '#8B2DD2'
bspc config normal_border_color '#000000'
bspc config presel_border_color '#702000'
bspc config top_padding 14
bspc config auto_cancel true
bspc monitor -d 2 3 15 20 17 22 23 10 7
Last edited by Ploppz (2014-07-12 17:28:25)

"Internet Mail - Problem during delivery processing" email received

Every email I'm receiving as of this morning is accompanied by an email from [email protected], entitled "Internet Mail - Problem during delivery processing"
Is this an issue on the Mac server side or a problem with my Mail app?
Many thanks in advance.

My Wife and I both have an Ipad and an iPhone, I use an iMac and my wife a MacBook Pro.
I have this problem with all my devices.
My wife has NOT got this problem.
We both use a [email protected] email acount.
Just compared the settings:
For "Incoming server" I have p03-imap.mail.me.com
My Wife has p02-imap.mail.me.com .... and has not got this problem.
I have setup a new rule for incoming mails (for the meantime):
move all incoming emails from [email protected] to trash and delete it.
Works fine for now,......until APPLE deals with the problem.
Message was edited by: RTONLINE

Email setup wizard problem with internet mail accounts

I never had a problem with email setup until recently. When I try to click on internet mail account it wont open for setup. But when I click on enterprise account it opens for setup. Any ideas?

Please make sure you have a good mobile data coverage as it is need for the set up to run.
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

New iPhone 5 - internet and mail reception problems?

I just acquired a new iPhone 5. I have regular reception internet and mail reception problems. The internet on both Wifi and provider network drops out on a regular basis, although reception signals of both wifi and network are strong. When turning off the phone and restarting the internet comes back for a short while and loses connection again. Has somebody else experience similar difficiulties, If yes how can this be fixed.

I just acquired a new iPhone 5. I have regular reception internet and mail reception problems. The internet on both Wifi and provider network drops out on a regular basis, although reception signals of both wifi and network are strong. When turning off the phone and restarting the internet comes back for a short while and loses connection again. Has somebody else experience similar difficiulties, If yes how can this be fixed.

SAP to OUTLOOK MAIL - GATEWAY Problems...

Hi Gurus;
I want to send email , sap to outlook. We use sap on the windows os. I created RFC with SM59 and created SAPConnect note with SCOT.
But I dont know create gateway process. Please help me.
My ref. shortcut : /people/thomas.jung3/blog/2004/09/07/sending-e-mail-from-abap--version-46d-and-lower--api-interface
Thanks for everything.
Best regards.

Hi Melih,
The problem here is that you are trying to use the internet mail gateway and Sendmail to relay mails on a Windows OS (usually to Exchange).
The main problem is that Sendmail is not a native Windows program. So the Blog that you were following was not correct for Windows OS.
Sendmail is a native Unix program and as such is called with switches. The IMG was designed to communicate with Sendmail with the follow command to correctly parse the mail (sendmail -i -f<SENDER_ADDRESS>) to Sendmail.
So you have to follow the blog below and use another command line mailer to correctly communicate with Exchange or any other SMTP mail server.
Please refer to the following blog to enable emails to be sent from SAP connect:-
[Email from SAP - 4.6* using MS Exchange|http://it.toolbox.com/wiki/index.php/Email_from_SAP_-_4.6C_using_MS_Exchange_2003]
And your problem will be resolved

Mac Mail Bluehost problem

Macbook Pro
OS X 10.9.5 (13F34)
Processor 2.53 GHz Intel Core i5
Memory 8 GB 1067 MHz DDR3
My mail is hosted on Bluehost, I haven't changed any settings. We switched our website from Bluehost to Wix on Tuesday of this week, but the email is still hosted on a separate account with Bluehost. Since switching over there have been increasing amounts of time where the mail isn't downloading. The mail comes from a joint account, my business partner is using Outlook and has not had any problems, while my Mac Mail has completely stopped downloading, it's now offline all the time. I'm using POP I've tried changing to IMAP, tried different settings - ports - but so far no success. Does anyone have any ideas? Thanks for any help you can offer.

Ernie,
Thank you for the suggestion. I'm not sure if there is a spam filter at work. I know that my Eudora setup doesn't do that. (It's Eudora Light, non-paid subscription.) But I do work at a college, and they may have a spam filter in their setup. I don't think they do, but it's possible. Your suggestion also gave me another idea. The college's setup is such that I can also get my mail via the internet. I will try to do that. If I can receive emails I send to myself through internet mail, then at least I would know that the issue is between Mac mail and Eudora. Does that sound reasonable? Also, do you think any of this could be related to a keychain problem? (Just a shot in the dark.)
Carl

SAP Internet Mail Gateway for MS Exchange 2003 Server

Hi,
Has anybody successfully configured the IMG to work with MS Exchange 2003?
We have our 4.6C currently configured to talk to Exchange 2000 through SXC
Note 594428 - SXC: Exchange 2003 Server is not supported
Solution
R/3 Basis Release 3.1I to 4.6D:
Use IMG 4.6D and sendmail instead of the SXC (see note 101573), or
Upgrade your SAP system to Web Application Server (WAS) 6.10 or later and then use the SMTP plugin.
We only use outbound mail from SAP and this is sent to intranet users only, we are not planning on upgrading for a at least a year and would like to avoid installing another mail server.
Note 363154 - Internet mail gateway: use other MTA than Sendmail
This note suggests that any MTA (Mail Transfer Agent) can be used so long as it can be called from the command line, Exchange is an MTA, anybody now how to do a command line call for Exchange?
I have read the documentation
http://help.sap.com/saphelp_46c/helpdata/en/0c/39c93589c5ab53e10000009b38f839/frameset.htm
Jasper

hi,
we are in the process of configuring the Internet Mail Gateway on R/3 4.6c on Unix platform.
I have created the RFC Destinations in SM59 and also checked the Test Connection and its working fine. I then did the Unix configuration and went on to the check whether the configuration was successful in SO01 by sending a sample text message to my company's mail address. but i did not recieve any mails on my Microsoft Outlook, instead the count under the errors column increased by one.
on checking the status for the sent message in SO01, its saying "No Delivery to [email protected](for reason, see long text)... but there's no long text either...
Can anyone please let me know the reasons for it and it would also be really helpful if someone can let me know whether i have missed any configuration settings.
Also, can someone send the list of parameters that are to be entered for the Unix configuration under mlsomadm mailgw.ini, so that i can verify whether i have entered the parameters correctly....
Kindly revert back at the earliest...
Thanks & Regards
Manicks

Mail expunge error and old mail switching to new mail status

Everything started when I set to enabled in mail-general-when searching mail boxes: include encrypted pages.
I was looking for a way to seach in the content of the message for the mails.
Then the first error appeared: the mails when I read those mails returned by themselves to the state of unread.
Then I disabled again the optin: mail-general-when searching mail boxes: include encrypted pages,
but the error continued. and all my mails (more than 1200) were set automatically to the "new" mail status each time that I started the mail program.
Now I created a mailbox named "old" when I move the new messages that I have read to that file.
But now the mail program uses the memory constantly.
with out the mail, the computer memory is near 5%, but when I start the mail program and use it constantly, the memory goes to 100% until I receive the mail expunge error.
The machine has 4Ghz ram, and the mail program uses all until I got the error, I am using a G5, dual cpu, 2ghz, mac osx server. There are no other programs using the memory.
1)how can I configure the mail to avoid the expunge error?
2)how I can configure the mail to keep the mails that I just read to an old state (avoiding those to restart their state to "new")?
3)it is possible to do searchs in all the content of the messages?
thanks
Alberto

You’re welcome.
Well, not knowing what the problem really is, and since it apparently started to happen after you changed some settings, I’d try setting up Mail again from scratch and import your mail back afterwards.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and making sure that there’s enough space available on the startup disk, try this:
1. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
2. Quit Mail if it’s running.
3. In the Finder, go to ~/Library/. Move (not copy) the entire Mail folder out of there, to the Desktop.
4. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop.
5. Open Mail and set it up again from scratch. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and check that everything works fine.
6. You’ll have to re-configure all your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
7. If Mail works fine now and you had any messages stored in local mailboxes, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions to import your mail from the old Mail folder that’s now on the Desktop. Import the Mailboxes folder first, then each of the POP-username@mailserver account folders, if any.
8. If .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
As a result of doing the above, some messages may be duplicated. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

How to confirm the alerts automatically in the internet mail?

Hi,gurus:
I wanna know how I confirm the alerts automatically in the internet mail.Now we have to navigate to the alert inbox to confirm the alert,but can I do it in the internet mail? I have confirued the parameter in ALRTCATDEF->CONFIGURE->SETTING->INBOUND PROCESSING,but it didn't work.
Thanks in advance.

hi,
I checked the library,and it says:
Confirming Alerts by Internet Mail
When an alert is sent by Internet mail, the Internet address of the alert user entered in alert configuration is entered as the Reply To address of the mail. An alert ID is inserted into the text of the mail. When the recipient answers the mail from the alert system, the alert is confirmed automatically. Inbound processing sends a status mail to the sender stating either that the alert has been confirmed successfully, or that an error has occurred. The alert ID must be included in the body of the reply mail.
My question is: How to reply the mail?Where do I write the the alert ID?any ideas?

Blackberry 9220 no option for internet mail account

hi guys i have been trying to setup email on my bb but it in setup it does not show an option of Internet Mail Account.
Guys please help me out

Hello varunsaketh
Welcome to BlackBerry Support Forums
Call your Carrier Aircel and activate BIS in your SIM account , When your Carrier activates BIS it will show you the Internet mail account option.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

MN05 vs SCOT: How to obtain mail status messages (with SP 8)?

Since we've installed SP 8, we don't receive E-mail status messages anymore.
In MN05 we always had two communication strategies (defined by "Doc Type/Purch. Org/Vendor") :
Vendor 1 (ex.: 123hotmail.com)
Send status/Requested statuts is set to "Return All Statuses"
send statuts/Status by Mail is set to "All Statuses"
SCOT is currently set to "not expecting any receipt confirmation or exceptions".
If we add « hotmail.com » in the domain exception list, our users will receive a status message for everything that is sent to this domain.
But the goal is to receive status message only for the two vendors defnied in the comm. strategy.
Any idea?

I made this test...
In SCOT, I added this address as an exception: 123<at>hotmail.com.
Then in ME9F, I edit my message to the vendor 123<at>hotmail.com... And I receive a receipt confirmation, good.
Then I edit a message to the vendor 789<at>hotmail.com... And I receive a receipt confirmation too, that's the problem...

Internet mail account setup inactive

Hi,
When I go to Home>Setup>Email Accounts
the Internet Mail account button seems to be disabled, and hence I can never setup an account through my phone. I have my personal e-mails etc. added through the carrier to my phone, but I am curious to know what I can do to make it start working from the phone, as it is a defect in my phone.
Amr Farouk
Solved!
Go to Solution.

BillJ wrote:
You'd be best to call your carrier again.
Cheers.
Hi,
Please help and support of Team BlackBerry, or was that the problem has been resolved.
Thank you very much.
Amr Farouk

Problems sending mail: some problem with the outgoing mail server SMTP?

I can't send e mails: some problem with the outgoing mail server SMTP?

I had this same problem with both my imac and mac book pro using hotmail via mac mail with bt as my internet provider. Suddenly 4 months ago out of nowhere i could receive emails but could not send them. I scoured all the threads followed all the fixes none of them worked. However I just phoned apple support and fixed it in a matter of minutes. I am SO happy. This is what the technician advised me:
Go to your apple icon and scroll down to system preferences. Then dependant on what machine you have it is different for my imac and mac book pro click on either air port/wifi then the advanced tab in the bottom right hand corner. Then click on the DNS tab. Hit the + sign on the left hand side and type in 8.8.8.8 then hit the + sign again on the left hand side it will create a new line underneathe and type 8.8.4.4 then hit okay on the bottom right and then hit apply, again on the bottom right. Then send a test email to check but it should be fixed.
Had to share this. Its been driving me mad for months.

SAPconnect Internet Mail Status Problem

Similar Messages

Maybe you are looking for