Sapdb (maxdb) and jdbc adapter problem

Hi,
i have installed this jdbc file:
http://sapdb.org/7.4/sap_db_jdbc.htm
like in this how-to:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to install and configure external drivers for jdbc and jms adapters.pdf
then i set up an jdbc to file szenario to test the adapter.
Driver is: com.sap.dbtech.jdbc.DriverSapDB
connection is: jdbc:sapdb://sapdb-host/XI_DATA
with sapdb-host is the db server and XI_DATA ist the database
user and pw is dba
sql statement is: SELECT * FROM "AAA_XI_DATA" WHERE "number" = 50
with AAA_XI_DATA is the table with test data.
the statment works in the sapdb studio. (No ; in sapdb and the XI)
but when i have a look at the runtime monitor at the af
messages there is no message genereated. where can i
check, if the jdbc driver is working and where do i find
error messages?
Regards
J.
Message was edited by: Jörg Pieper

You can check if there is some kind of error with the JDBC Adapter in the Runtime Workbench. Inside the RWB, open "Component Monitoring", "tree view", "Adapter Monitoring", and in the adapter listing you'll find the "JDBC Adapter". It should have a green light. If not, the error will be displayed.

Similar Messages

JMS and JDBC Adapter in PI7.1

Hi All,
Kindly tell me about the blogs for JMS and JDBC adapter.
Please tell me about the Message Types in JMS adapter.
Thanks in advance.

Hi Shwetambari,
Thanks for the reply.
We need to mention the Adapter Modules while configuring the communiucation channels in JMS
e.g. Adapter/ConvertJMSMessageToBinary,Adapter/ConvertBinaryToXMBMessage etc.
So please tell me whether we need to write the cide for the same in JAVA or it is already there ?If it is there then whre can we get it?Do we need to decompile the archeve ?If so, then how to do it?
Can you give me the Adaqpter Modules for which the code is already there?
The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK.
What are the different types of Messaging Systems?Or what is meant by the Messaging System in JMS?
What are the different types of Messages used?
Thanks in advance.
Edited by: Shweta Kullkarni on Sep 4, 2009 5:22 AM

JDBC adapter , problem in inserting Korean Charaters in MS SQL

Hi ,
We are facing a problem when we are inserting "Koren Charaters" in DB of type MS SQL using JDBC adapter.
What we tryed is:
We found that there is a problem in Code Page Conversion. We tried adding a Modules in Receiver Adapter of type JDBC.
Processing Sequence:
AF_Modules/XMLAnonymizer--Bean Local Enterprise Bean 1
AF_Modules/TextCodepageConversionBean-Bean Local Enterprise Bean-- 2
CallSapAdapter----
Local Enterprise Bean -- 0
Module Configuration:
1 anonymizer.encoding UTF-16
2 Conversion.charset UTF-16.
But we are getting the error in CC as:
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: ERROR occured parsing request:com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) feff, 3c, feff(:main:, row:2, col:6)(:main:, row=2, col=6) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) feff, 3c, feff(:main:, row:2, col:6)"
also should I have to check any patches related to JDBC driver from MS SQL which supports korean Code Page?
Any one who had face this problem pls give us inputs:
Thanks
Shankar

Hi
In the XML sent to the channel you will have to use a special quoting
for any Unicode strings, which the JDBC Adapter will not produce on its
own. Instead, you need to add an attribute 'hasQuot="no"' to those
elements (most likely in the mapping where you produce the XML) and
explicitly enclose the data in single quotes prefixed with the letter N.
For clarity, one example:
If your original "INSERT" operation looks like this:
<StatementName2>
<dbTableName action="INSERT">
<table>realDbTableName</table>
<access>
<col1>val1</col1>
<col2>val2</col2>
</access>
</dbTableName>
</StatementName2>
and "col1" contains Unicode data, change the document as follows:
<StatementName2>
<dbTableName action="INSERT">
<table>realDbTableName</table>
<access>
<col1 hasQuot="no">N'val1'</col1>
<col2>val2</col2>
</access>
</dbTableName>
</StatementName2>
Regards
Shankar

Configuring file and JDBC adapter using MAX DB

Dear Experts..!!!
The problem description is i need to store a text file in Database(MaxDB).....
in receiver communication channel there is database connection in that i want to know what entrys to be done..... and plz do let me know is there any other things to be done to achieve the output.

Hi Vinod,
I also do not have idea about MaxDB, but you can refer these links. It will help you out in getting some more information about MaxDB and XI:
<a href="/people/joerg.hoffmeister/blog/2006/12/07/maxdbsdn:///people/joerg.hoffmeister/blog/2006/12/07/maxdbsdn
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/maxdb">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/maxdb</a>
Go through the home page of MaxDB on SDN, it has plenty of information to help you.
Regards,
Subhasha ranjan

Need information about Mail and JDBC Adapter

Hi Guys,
I am just started learning XI. Can any you provide any document how to use Mail and JDBC adapters in step-by-step way.
Thanks & Regards
Surendra M

hi,
Check these links
Mail Adapter
http://help.sap.com/saphelp_nw70/helpdata/en/ad/bf93409c663228e10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
JDBC Adapter
http://help.sap.com/saphelp_nw70/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Receiving Mail attachments using additional files of file adapter
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
FILE to JDBC Adapter using SAP XI 3.0
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Tips and Tutorial for Sender JDBC Adapter
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
Sachin
Message was edited by:

JDBC Adapter problem

Hi,
We have a scenario, data comes SAP via proxy to XI and then SQL DB using JDBC adapter.
Data is not being updated in SQL DB table.
SXMB_MONI, shows a chequered flag.
Any ideas.
-Naveen.

HI Naveen,
First go to RWB->Message Monitoring->Adapter Engine and check in the MEssage Display Tool (MDT) .
Also check the Adapter monitring. for JDBC adapter.
Check the Source Messages and Mapped Target Messages in SXMB_MONI...
Check are you looking/given correct connection parameters/table name in JDBC adapter configration..
Refresh the cache Also for the Adapter..
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Stored procedures and JDBC Adapter

Hey guys ,
any blog where i canlook up w.r.t. working with any stored procedure through xi ?
Appreciate ur help.
Krishna

Hi Krishna,
Here you go-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Also remember that, Sender JDBC Adapter doesnot support Oracle Stored Procedures. Because Sender JDBC Adapter sends resultset to XI. But Oracle stored procedure returns Cursor.
I think, if you are using other database then it may support.
Regards,
Moorthy

Oracle CEP and JDBC Adapter

I am using Oracle CEP 10g on WIndows.
I wrote the following code on CEP:
OracleDataSource ods = new OracleDataSource();
ods.setURL("jdbc:oracle:thin:scott/[email protected]:1521/orcl");
Connection conn = ods.getConnection();
// Check for the existence of a previous customerID
String selectStmt     = "SELECT * from STEPS " +
     "WHERE (streamID='" +
     this.customerId +
     "') and (assetid='" +
     this.eventName +
Statement stmt = conn.createStatement();
//System.out.println("-- calling SELECT");
//System.out.println(selectStmt);
ResultSet rs    = stmt.executeQuery(selectStmt);This works great, except it is exceedingling slow. I am sending about 20,000 messages to this code.
I think the problem is that I open the connection everytime I perform a select (and later an insert statement).
The server instance goes away after the message has been processed, and I can not save the connection.
Would using an adapter in config.xml prevent this openig a new connection every time a message invokes this code ?
If so, I have never done JDBC with an adapter and I dont understand how to use an adapter to use a WHERE clause to select on variables, since in the example I have seen so far, it places "SELECT 1 from DUAL" into the config.xml and does not explain how to get mix have the SELECT statement interact with code variables or better yet how to get your code to get a connection handle.
Could someone please post an exaqmple of how to use an adapter with JDBC, and possibly how to get your code to access a connection handle from the config.xml ?
Thanks

Hi,
From note : 831162,
<i>Oracle JDBC Driver (classes12.zip / classes12.jar) Deadlocks
Q: I have deployed the Oracle classes12.zip / classes12.jar JDBC driver as per the instructions in the XI Configuration Guide.
Unfortunately, I frequently notice hanging database connections. A thread dump taken according to the instructions in note 710154 shows one or more blocking JDBC Sender/Reciver threads and optionally that the JVM has detected a deadlock.
A: <b>The Oracle classes12.zip / classes12.jar driver is compatible with JDK 1.2 and 1.3 only, but not with JDK 1.4. Upgrade to a current version of the driver (ojdbc14.jar). For details, refer to note 941317.</b>
Make sure that you remove classes12.zip / classes12.jar from aii_af_jmsproviderlib.sda prior to adding the new driver as per the instructions in the answer to question #1 above as you will get a class name collision otherwise (all JARs from aii_af_jmsproviderlib.sda are loaded into the same class loader and the driver class name of both driver versions is the same).
Before deploying the updated driver, ensure that the new version is still compatible with your Oracle database server release. For details, refer to the release notes provided by Oracle.</i>
Regards,
Bhavesh

System.out.println and Network Adapter problem

Hello,
I am encountering a 2 strange problems. I have 2 oracle application server instances, one dev and one production.
The first problem is when I type System.out.println in the JSP's i am able to see the output in both \opmn\logs\oc4jinstance. But the System.out.println in the java classes or bean show up only in development logs but not in production box.
Is there a setting I am missing here?
The second problem is on our development machine the application works fine, but as soon as we deploy the application on production I encounter:
could not open new connection: Io exception: The Network Adapter could not establish the connection
I have a class called DBUtils, which uses a 3rd party library to get connections from the connection pool as below. Using JSP I call the getConnection(). On my dev Oracle Application Server Instance it works fine, but on production I get the error. Can it be there is a setting that I am missing on the production box?
When I use a JSP and connect to the database without using the DBUtil class. I can connect to the database fine. Also using the DBUtil class with production oracle IP address on the development machine lets me connect with no problem, but production machine does not let me.
public class DBUtils {
static ConnectionPoolBean pool;
static {
System.out.println("DBUtils() - before connection pool bean");
pool = new ConnectionPoolBean();
pool.setDriverClassName("oracle.jdbc.driver.OracleDriver");
pool.setdbURL("jdbc:oracle:thin:@IPADDRESS:PORT:SID");
pool.setUser("USERNAME");
pool.setPassword("PASSWORD");
pool.setInitialConnections(1);
pool.setIncrement(1);
pool.setSoftMaxConnections(40);
public static Connection getConnection() throws SQLException {
System.out.println("Getting Oracle Connection");
return pool.getConnection();
public static void returnConnection(Connection conn) throws SQLException {
System.out.println("Returning Connection");
pool.returnConnection(conn);
Thanks for your help in advance.

Hi
System.out.println is a method of PrintStream in IO which is used to print the output on console in java progs.Here in jsp ,the o/p is printed on server's console window.But out.println is totally different as, out is implicit object derived from JspWriter and is used sly to PrinWriter 's object is used in servlets.It's work is to write upon Browser.
System.out.println() is normally used in jsp for debugging purposes only.
Ashish

Keyboard and AC adapter problem

I have a Toshiba protégé z935-p300 and I just recently experienced this problem where whenever I plug in the ac adapter the letter "K" starts typing rapidly on the monitor. The button is not stuck or dirty. Whenever the adapter is unplugged everything works perfect. Please help me fix or find a resolution for this problem.

I have never heard of this before. I Googled and came up with nothing even close to your problem. It's the week end and you may recieve more replies latter. I would try a different adapter???
Dokie!
PS The only thing that comes to mind is a improper ground????
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Urgent ! BPEL file and ftp adapter problem.

Hi All!
I have created a bpel process having two partner links.One for the ftp adapter and one for the file adapter. I want the ftp adapter to poll the *.pdf files in the specified directory on the remote machine periodically and get them to my local machine here. For this I am using ftp adapter with read operation and with opaque schemas(because I want the files as they are without any transformation). I am using a receive activity with the ftp adapter, with the create instance box checked.
To write the file to the local machine I am using file adapter and write operation.File adapter also uses opaque schema.With this file adapter I am using invoke activity.Invoke is below the receive activity in the bpel process. I deployed this successfully on the default domain. I want the bpel process to run automatically,depending on the polling frequency given and create instances and bring the files to my machine.
But it is not happening.
Can anybody tell me where I am going wrong.How to accomplish this? It is very urgent issue for me.
Thanking in advance,
Regards,
Deepika.

Hi All!
Now I am able to write files and also read files successfully with the remote server. I followed the same method described above.I am using binary format itself for pdf files.But I have to check the option 'to delete files after successful retrieval' to make this happen.I created several partnerlinks with the option in the ftp adapter not checked,but it is not working. Has anybody done successful retrieval without deleting the files at the remote server? If so please let me know.
Thanking in advance,
Regards,
Deepika.
Message was edited by:
Deepika

MS SQL Server 2000 and JDBC Driver Problem

I was wondering if you could help me. I installed Java 1.4.1 on my Win2K machine along with MS SQL Server 2000 JDBC Service Pack 1 drivers.
The drivers and JDK installed perfectly and I properly set my class path. Yet everytime I try to execute my code I get the: java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver error.
Any idea why? Is it posisible that the JDBC drivers are not comaptible with Java 1.4? I also installed 1.3.1 and I get the same issue. Let me know if you have any insisghts. Much thanks.
[email protected]

Those drivers are perfectly compatible with JDK 1.4.1. I've used them successfully.
CNF Exception ALWAYS means that the class loader can't find the JAR in the CLASSPATH. You said you "properly" set your CLASSPATH. Am I right in assuming that you mean a Win2K environment variable?
I think that's a bad idea. I don't have one on my machines at all.
I always set the CLASSPATH myself when I compile and run an app, to make sure that I always have exactly what I need.
If you're running Tomcat, it doesn't even look at the system CLASSPATH as far as I know. If you're using this in a Web app, but those JARs in your WEB-INF/lib directory and deploy your stuff as a WAR file. Tomcat will find it in the CLASSPATH for sure then.
Let me know if either of those suggestions hits the mark. If not, send more info and I'll try again. - MOD

Problem in JDBC Adapter Mapping

Hi all,
I am working on a scenario wherein i am trying to connect an ORACLE DB to SAP 4.7 system using XI 3.0 . I configured the JDBC Adapter and the JDBC adpter is picking up the message but i have a problem in JDBC adpter Mapping.
The error message is like this:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_ORACLE_MSGMAP_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_ORACLE_MSGMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
How to map the "Resultset" from the Adapter to a target message? Can anybody throw some light on how to get the message from the JDBC adpter and map it to some other message format...Any documents regarding this ?
Waitin for ur replies...
Bye,
Romit Shankar Arun.

Hi,
Does your other SDN post "Inserting data through JDBC adapter" refer to the same problem?
I assume you use XMLSPY for creating XSDs.
I used the XSD posted by you in the other forum thread and tried to generate the XML structure and it does not seem to generate the XML structure in the format required by the JDBC adapter.
sample file generated from your XSD posted in the other forum thread:
<?xml version="1.0" encoding="UTF-8"?>
<resultset xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Untitled1.xsd">
     <row action="INSERT">
          <CUSTOMER_NUMBER>String</CUSTOMER_NUMBER>
          <COUNTRY_KEY>String</COUNTRY_KEY>
          <FIRST_NAME>String</FIRST_NAME>
          <LAST_NAME>String</LAST_NAME>
          <AUTHORIZATION_GROUP>String</AUTHORIZATION_GROUP>
          <INDUSTRY_KEY>String</INDUSTRY_KEY>
          <ACCOUNT_GROUP>String</ACCOUNT_GROUP>
          <INTIAL_CONTACT>String</INTIAL_CONTACT>
          <COMPANY_CODE>String</COMPANY_CODE>
          <CITY>String</CITY>
          <CITY_CODE>String</CITY_CODE>
          <COUNTRY_CODE>String</COUNTRY_CODE>
          <DISTRICT>String</DISTRICT>
          <FAX_NUMBER>String</FAX_NUMBER>
          <HOUSE_NUMBER>String</HOUSE_NUMBER>
          <POSTAL_CODE>String</POSTAL_CODE>
          <REGION>String</REGION>
          <TELEPHONE_NUMBER>String</TELEPHONE_NUMBER>
     </row>
</resultset>
Compare the above to the template i have mentioned.
Hope this helps.
Regards,
Sridhar

Problem in sender JDBC adapter

hello,
I am facing one typical problem in sender JDBC adapter.
Here is the issue,
JDBC API method getString threw an exception: java.sql.SQLException: Cursor state not valid.
Can anyone please help me out in solving this problem?
Actually after a retry of 3 times the message has been successfully sent. Till then i am getting these error
On 1st attempt ,
Error during conversion of query result to XML java.sql.SQLException: Cursor state not valid
On 2nd attempt,
Error during conversion of query result to XML java.sql.SQLException: Internal driver error
(class.java.lang.InterruptedException)
On 3rd attempt,
Processing finished successfully.
This is the scenario that i can see in the audit log.
Can you please help me out in solving this issue.
Thanks,
Soorya

Hi gaurav,
It was a good response from your side.
I have gone through the FAQ but could not able to find anything.
Can you please help me out in this regard ?
Also i am using select query of this kind,
SELECT
SEFVHRC.VHRBRCD,SEFVHRC.VHRCUCD,SEFVHRC.VHRVIN,SEFVHRC.VHRMOCD,SEFVHRC.VHRCHAS,
SEFVHRC.VHRSLOR,SEFVHRC.VHRDIVI,SEFVHRC.VHRMGCD,SEFVHRC.VHRMOCH,SEFVHRC.VHRVHTY,
SEFVHRC.VHRBDTY,SEFVHRC.VHRMFYR,SEFVHRC.VHRMOYR,SEFVHRC.VHRMODS,
SEFVHRC.VHRMDTL,SEFVHRC.VHRCLBR,SEFVHRC.VHRRCID,SEFVHRC.VHRARDT,
SEFVHRC.VHRLUTM,SEFVHRC.VHRLUDT,SEFVHRC.VHRKEYN,SEFVHRC.VHRCTORN,
SEFVHRC.VHRCTIMP,SEFVHRC.VHRPRDT,SEFVHRC.VHRPRDT,SEFVHRC.VHRRCDT,
SEFVHFT.VHFCLCD,SEFVHFT.VHFCAT,SEFVHFT.VHFCADSC,SEFVHFT.VHFKEY,SEFVHFT.VHFTEXT1,
SEFVHFT.VHFTEXT2,SEFVHFT.VHFTEXT3,SEFVHFT.VHFTEXT4
FROM
SAPTESTLIB.SEFVHRC,SAPTESTLIB.SEFVHFT
WHERE
SEFVHRC.VHRVIN = SEFVHFT.VHFVIN AND SEFVHRC.VHRSTTS = ' '
and update query of this kind,
Update SEFVHRC SET VHRSTTS = 'R' WHERE VHRSTTS = ' '
I am using prity big select query. is there any option to optimize it?
Can you please help me out in solving this problem
urs,
Soorya

Problem with XML SQL JDBC adapter

Hello All.
I have quite strange problem with my PI.
Whole scenario is SOAP -> JDBC, asynchronous. Everything works fine on DEV server. After transporting objects (using CTS) to QA env I'm getting this error:
JDBC Message processing failed, due to Error processing request in sax parser:
No 'action' attribute found in XML document
(attribute "action" missing or wrong XML structure)
But document seems to be correct. I've compared it to DEV server documents - they are identical. What could be wrong??
Document looks like this:
<ns2:BIPMessage xmlns:ns2="http://mynamespace.com/xi/sn"
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<synchSlLok>
   <STATEMENTNAME>
     <SYNCH_SL_LOK ACTION="INSERT">
        <TABLE>SYNCH_SL_LOK</TABLE>
         <ACCESS>
            <ID_TRANS>22050</ID_TRANS>
            <ID_LOK>1234</ID_LOK>
            <ID_CBK>1000050911</ID_CBK>
            <NR_LOK>1234</NR_LOK>
            <OPIS_LOK>12312312312312</OPIS_LOK>
            <TYP>D</TYP>
            <OPERACJA>U</OPERACJA>
          </ACCESS>
      </SYNCH_SL_LOK>
    </STATEMENTNAME>
</synchSlLok>
</ns2:BIPMessage>
TIA
Best Regads
Maciej

Hi,
i was also facing the same error few days back in a JDBC -RFC-JDBC Synchronous scenario. In that scenario, i was using 2 modules in JDBC sender module tab. It was working fine. later i change polling interval and then i started getting same error. it happened coz of sequence of Module got changed somehow.
So please check in Receiver JDBC adapter and SOAP sender adapter CC if anything is changed. If this scenario is working in DEV as it is then it should work after transport.
Else have a look here
Re: attribute "action" missing or wrong XML structure
JDBC - No 'action' attribute found in XML document - error
Regards
Aashish Sinha
Edited by: Aashish Sinha on Mar 15, 2011 10:42 AM

Sapdb (maxdb) and jdbc adapter problem

Similar Messages

Maybe you are looking for