SAPGUI 640 Help

I am the end user of Sapgui 640, recently i facing the problem when logon onto in. Below was the error message.
connection to host 10.1.30.83, service sapdp52 timed out.
Component: NI(network interface)
Release: 640
version: 37
Module: nixxi_r.cpp
Line: 1067
Method: NiPConnect
Retrun code: -12
Counter: 1
Appreciate of yr advice.

Then you shouls check your Gui settings, all the information are correct or not or make sure that your server is running.
You can find these things in your Gui just make sure
Description-- anything such as IDES
Application server - - <Servername> or <server ip>
System id --             <3 character alfanumeric or whatever your SID>
system number -- 00 or whatever you system number
SAP system--- R/3
Regards
Subhash

Similar Messages

  • Sapgui 640 error  please help...

    hello everybody, i just want to point out that i am relatively new to the system, and i am having alot of issues related to the program, my main problem is the logon process, when i start the sap program, it send me a pop up with sapgui 640 as a  header  the error is "Error: hostname "arsigip"unknown"... please i really need to solve the issue, i need your profesional help...thank you for your time....

    Hi,
    Any reason why want to connect to BW from EP through ITS.
    I think you can directlty connect to BW from EP.
    These links should be of some help
    http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
    Thanks
    Senthil
    P.S: Rewards Points for useful/helpful answers

  • Fail to export from SAP to Excel on SAPGUI 640 on NW04

    Hi
    I have a user who is trying to use the export to excel button in a standard SAP transaction, when he uses it, he gets all the questions, chooses excel to export to, chooses table, then nothing happens, he just gets the standard message 'save data in the spreadsheet'.
    I logged onto his PC & used SAPGUI in ST03N, when i tried the export I got the same issue, selected all the export options to table for excel, no errors, but excel does not load? I did the export on my PC from ST03N and all worked ok and excel started and exported the data as expected, so its the users SPAGUI/PC/Excel.
    No other users are having this issue, lots are exporting to Excel ok, even loaded it and then done the export with Excel already started and fails to export. The PC is a standard build, same as the rest, as is SAPGUI 640.
    The desktop PC team have passed this onto me and i'm the basis admin, i've ran things like SAPCHECK in the past, has anyone got any ideas what I can check to find out why Excel is failing to start on users PC when triggered from SAPGUI? are there any specific options you need selected on SAPGUI install to allow export to work?
    Out desktops are Windows XP Pro and Office 2000.
    We are running NW04 & ERP2004 on Windows 2003 64 bit & SQL Server 2000
    Thanks for any help.

    Hello,
    Just check if the users authorizations are alright. Check if she has the activity 61 in authorization object S_ALV_LAYO. If she doesnot have assign it to her and then check again.
    Regards.
    Ruchit.

  • "Sapgui 640 " Error in VF01 T Code

    Hi All,
    When I am going to VF01 and after entering Delivery doc no:,Pricing date and the Billing Doc type: and pressing enter I am getting an error in Pop-up ...
    Heading is "Sapgui 640 " and message is..
    SAP System Message
    Work Process restarted;session terminated and closing that session
    Can any help me on this..
    Thanks
    Sthen

    This is most likely an issue with the Kernel of the Application server. Do you use the latest Kernelpatch?
    Regards, Martin

  • I can't find startrfc.exe in SAPGUI 640

    I use the program startrfc.exe to execute a function of sap to print invoices, but with the new version of sapgui 640 this file doesn't appear.
    Where can I find this file, or how can I execute this function out of sap?
    Thanks in advance.
    Best regards.

    hi
    in that new version what i heard is that
    setup icon appears that is in redd and orange color
    go to that and double click that one
    and then next and next
    and at last finish button
    regards,
    srikanth

  • Maintaining sapgui 640 config on migration to vista and gui 7

    Hi,
    We are migrating from XP to Vista (giving new notebooks to users) and SAPGui 640 to 710.
    I know that we can copy saplogon.ini to the new notebook preserve the links to the servers. 
    How can I copy the customizing settings of their SAPGui to the new notebook (like the visual design, color settings and font size that the user have set in their sapgui.)
    thanks,
    Roel

    Many thanks Sergo,  I also tried that approach but did not find any.
    I tried changing the sttings in sapgui (taking note of the time of change) then search the entire C drive for some files that was changed on the same time.  Unfortunately I only found sapgui logs but no config files.
    I have just posted a question to oss. Please update me if you find anything. 
    thanks,
    Roel

  • SAP logon 640 help files

    Hi can anyone tell how should i instal application help & sap library to the front end. I have sap logon 640 version. I downloaded from sap-market but now I am unable to get application help when i do F1. How to activate my sap library and application help for my front end??

    Hi Supriya,
    Welcome to SDN. You can find some help documents at <b><DRIVE + PATH>\50072743_4\DVD_6.40C3_Pres._Serv._Comp._Cont.Serv\PRES1\DOCU</b>
    This is good enough for using the Front End.
    Refer your other thread for more information.
    SAP logon 640 help files missing in my system
    Hope this will solve your problem.
    Thanks
    Kathirvel
    Message was edited by: Kathirvel Balakrishnan

  • SAPGUI 640 patch 19, BEX SAP BW 3.x, , Netweaver04 - No variable selection

    The above in subject line is installed. Checked the installation w/sapbexc.xla, no major issues, all components were selected during frontend install. When the BEX Browser is launched I connect to BW and I select a report a Visual Basic error "Run-time error '91' Object variable or With block variable not set" occurs. Excel is opened but the expected variable selection screen does not appear. In addition to the above the BW addon patches 8 and 9 are installed and a couple of entries made into the PC registry per note 542961. SAPGUI works well for everything else as far as I can tell. What have I missed to make this work? prkctybum

    Lou,
    Please help me with this issue. We have the same similar issue you had. We can do the Global Settings going to the individual users but we are not able to push the resolution to every machine in the company, please see the note below. If you could send the resolution showing how you were able to push the code to every machine. You can mail me to [email protected].
    I’ve attempted to use .NET 2’s storeadm /LIST command to pull the BEXAddin info from the IsolatedStorage Assembly where it keeps a record of the bexaddin.dll information. However the record it keeps is of no help. The file path:
    C:\Documents and Settings\%USERNAME%\Local Settings\Application Data\IsolatedStorage\x1smiiqw.qws\p1vq0mkf.2u2\Url.fc1l2xts4acc5iv3nxl2uoy0btkfeen5\AssemFiles\BExAddin.xml
    …is not kept here, or anywhere else that I can find. I’m going to have to do this the hard way and build something to check if IsolatedStorage exists, if so, query the folder structure, and check to see if the BEXADDIN.XML has been built, if it has, rewrite the legacy option. If it doesn’t exist, that’s the BIG issue, we’ll have to initiate Excel to run the BExAnalyzer that way it generates the IsolatedStorage and then repeat the above. The problem is that running Excel without the customer realizing that I’m running it is kinda tricky, what’s worse is that this would have to run for every user on a machine, and that’s impossible to do without everyone’s password, so essentially, this would only work for the logged on user, or what USD perceives as the logged on user, and since USD runs under the NT AUTHORITY\SYSTEM account that’s what it will see as the current user. So, long story short, I don’t think I can automate a fix for this.
    So, while I could query every existing users folder structure within IsolateStorage, I cannot guarantee that they’ve run BEX once to generate the folder structure for themselves in order for me to patch it. We could force BEX open after pushing SAP, but again, it would open for the SYSTEM account, not a “real” user. The only way to automate is to get the customer involved and have them run BEX one time, but how would we know to then push the fix…
    Kiran

  • Sapgui 640 - Connection refused

    Hi,
    I've installed the 'SAP NetWeaver 2004s ABAP Trial' on my notebook. When I try to log-in I get the following error-message with following content:
    partner not reached (host 127.0.0.1, service sapdp00)
    WSAECONNREFUSED: Connection refused
    In detail:
    Component: NI (Network Interface)
    Release: 640
    Version: 37
    Module: nixxi_r.cpp
    Line: 8688
    Method: NiPConnect2
    Return code: -10
    System call: SiPeekPendConn
    Error no: 10061
    Error text: WSAECONNREFUSED: Connection refused
    Counter: 1
    I've done all steps according to the installation guide e.g. changes in the '<%WINDIR%>\system32\drivers\etc\services'- and the '<%WINDIR%>\system32\drivers\etc\hosts'-file. I also installed the Microsoft Loopback adapter.
    Can anybody help me??
    Many thanks in advance
    Mehmet
    Ok! I have some more information.
    My application server doesn't start correctly:
    Start Application Server - Starting System NSP:
    - Start database instance (ok)
    - Start ABAP instance (time out!!)
    Mehmet
    Message was edited by: Mehmet
            Mehmet Pamukci

    Hello Klaus,
    the actual situation is as follows:
    I entered a password during the installation which was too long (10 chracters) so an error occured during the installation. Afterward I started the installation again and entered a correct password (8 characters). Now the installation reached 100% but not finished (another error occured). To cut a long story short I tried to install the Trial several times because at the latest when I tried to log-in the above mentioned error message was displayed. So I found a sapnote which described how to delete MaxDB. In that case it was listed 4times (because of my installation efforts). I deleted the entries (registry entries also). I checked all prerequisites and started the installation again. The actual state is that (of course) another error appeared:
    C:\sapdb\NSP/log.txt:
    (Feb 15, 2007 3:07:24 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\NSP\log.txt for details.
    (Feb 15, 2007 3:07:24 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/mpa/LOKALE1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/mpa/LOKALE1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    C:/DOKUME1/mpa/LOKALE1/Temp/MaxDBSAPNWPREV.log:
    Thu Feb 15 15:07:22 CET 2007 MaxDB sdbinst: creating database NSP...
    Thu Feb 15 15:07:22 CET 2007 MaxDB sdbinst: Checking free space on filesystem
    Thu Feb 15 15:07:22 CET 2007 MaxDB sdbinst: Creating database instance
    Thu Feb 15 15:07:22 CET 2007 MaxDB sdbinst: Starting communication service
    Thu Feb 15 15:07:23 CET 2007 MaxDB sdbinst: Logging in
    Thu Feb 15 15:07:23 CET 2007 MaxDB sdbinst: cannot write to network connection
    Thu Feb 15 15:07:24 CET 2007 MaxDB sdbinst: installation exited abnormally  at Th, Feb 15, 2007 at 15:07:23
    Thu Feb 15 15:07:24 CET 2007 MaxDB: Error during call to sdbinst, rc= 1
    Thu Feb 15 15:07:24 CET 2007 MaxDB: Done with call_sdbinst
    Thu Feb 15 15:07:24 CET 2007 MaxDB: rc of sdbinst = 1
    Thu Feb 15 15:07:24 CET 2007 MaxDB: Start of CallSdbuninst
    Thu Feb 15 15:07:24 CET 2007 MaxDB: IndepProgPath: c:/sapdb/programs
    Thu Feb 15 15:07:24 CET 2007 MaxDB: dbmcli path: c:/sapdb/programs/pgm/dbmcli.exe
    Thu Feb 15 15:07:24 CET 2007 MaxDB: Calling check for db_enum in case of an abort
    Thu Feb 15 15:07:24 CET 2007 MaxDB: Instroot for nsp is: c:\sapdb\nsp\db
    Thu Feb 15 15:07:24 CET 2007 MaxDB: nsp and its instroot is the only software installed.
    Thu Feb 15 15:07:24 CET 2007 MaxDB: will remove all software
    Hope you can give me an tip!
    Mehmet

  • Sapgui 640 win vista se80

    hi experts.
    i install minisap 6.1 with sapgui 6.4 in windows vista.
    But when i try to open se80, the sapgui close.
    Please help.

    Hello,
    SAP GUI 6.40 is not support on Windows Vista. Please use SAP GUI instead.
    See /thread/488760 [original link is broken] where it is available.
    Best regards
    Rolf-Martin

  • Searching for BW Front End Patch for BW 3.50 and SAPGUI 640

    Hi SDN Community
    We have recently upgraded to SAP GUI 640,
    Analyzer, Query designer and WAD are now not working i image because it needs an upgraded BW frontend patch.
    But i am trying to find the correct FEP for BW version to install for BW 350.
    I have come as far as the below link, but cannot find the FEP's. Your assistance would be greatly appreciated.
    Thank you.
    Simon
    Download BW 3.x Frontend Patches in the new
    SAP Support Portal: Software Distribution Center
    using the following path: http://service.sap.com/swdc
    Download --> Support Packages & Patches --> Entry by Application Group --> SAPNetWeaver
    --> SAP NetWeaver --> < SAP NW 04 --> Entry by Component --> Business Intelligence --> SAP BW 3.5
    --> Frontend -->

    Go to SAP Note 1006942 - BW 3.5 Frontend Patch 12 and click on the 'Download Corrections' button at the top of the screen.
    Hope this helps...
    Bob

  • SAPGUI Scripting - Help, Books, Tutorial, Articles

    If anyone knows about any good books, help topics, articles, tutorial on SAP GUI Scripting. Please let me know.
    Thanks,
    _M

    Hi Manoj,
    the bulk of the scripting documentation is available at the service market place at http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000050367
    An updated version of the API document is currently in the works.
    There is also a book 'ABAP Best Practices', which has a chapter on SAP GUI Scripting. I'm afraid it seems to be available only in German so far.
    Best regards,
    Christian

  • Sapgui f4 help last search

    I know this has to be simople.  One user (maybe more) does not have the "last search saved" from the t-code for looking up items in our system.  I noticed that on the main menu HELP->SETTINGS  there is no "F4 Help" tab for this particular user.  I cannot determine what setting/authority that should be changed to allow the setting to appear, and hopefully have the "last search" option saved in the lookup.

    Dear,
    Do contact ABAPer to help in this matter.
    Regards,
    Syed Hussain.

  • SAPGUI 640 registry key's

    Is there any documentation or sap notes about all the existing sapgui registry key's. For Example to activite the register 'web dynpro application' on the sapgui screen.
    Thanks
    Roger

    Anthes,
    There are individual notes that will have specific registry keys, but no overall documentation that I have found.
    Here is the .reg file data to enable the webdynpro, I believe it is still current:
    [HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAPLogon]
    "ShowWebDynproAppTab"=dword:00000001
    Regards,
    John

  • SAPGUI 640 exception

    Dear gurus,
    I've found that there is an automatic mail that created when an exception appears in SAPGUI640 Build14.
    Is there a way to disable it ?
    Please Advice,
    Dimitry Haritonov

    Hi Christian,
    Does this registry key prevent from an automatic mail ?
    Please Advice,
    Dimitry Haritonov
    Message was edited by: Dimitry Haritonov
    Message was edited by: Dimitry Haritonov

Maybe you are looking for

  • Is the Mini-Dvi adapter suppose to click into the back on the Mac mini?

    Is the Mini-Dvi adapter suppose to click into the back on the Mac mini? It does on my mac book but not on the Mac mini. I sort of have to just jam it in there, no nice clicking sound, and it does not feel very secure.

  • Displaying Purchase order in report

    Hi Expert I am modifing a report for Mangement , They want to display purchase order in the report .....So I did the following modification but when I run the report all the fields are displaying and purchase order is showing empty, though I have add

  • RFC call to spda_get_stack_info failed.

    Hi All, When carry out the system upgrade from 47x200 to 701 EHP4 SR1, has a error in get stack info in the preparation step. From windows 2003 x32 MSsql 2000 upgrade to windows 2008 R2 and MS sql 2008 R2. Error message set: 'RFC call to spda_get_sta

  • MY MACBOOK PRO DOESN'T DOWNLOAD OS X MAVERICKS! HELP, MY MACBOOK PRO DOESN'T DOWNLOAD OS X MAVERICKS! HELP

    my macbook pro is furnished with Mac OS X Lion 10.7.5. Now i'm trying to download os x mavericks but it doesn't work! the bar is locked at the root, it' doesn't download! SORRY FOR THE REALLY BAD ENGLISH BUT I AM ITALIAN!!!

  • [Solved] Warcraft screen freeze

    I few weeks ago before I moved to Arch I had sidux on my computer. I had Wine running Warcraft III fine for months. So then I also wanted to play Starcraft (which doesn't work so well on Wine) so I installed virtualbox with Windows XP. I forget how e