SAPinst hung in the starting of the installation

Hi all,
I am in the process to install SAP NW ABAP Server with NW7 EHP2, in the first time the installation went fine till we reach the ABAP import which 26 import successfully and 3 failed. we try to redo the import again but it failed after some time the sapinst was hung during that process and we can not see any activity in the log.
We cleaned the file system again and start new installation it now reach to Install Common system file and the sapinst hang the message in sapiinst log shows
INFO       2011-12-05 13:11:38.785 [syuxccuren.cpp:1068]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & /)
           lib=syslib module=syslib
this message is there for the bath 3 hours any clue for that behavior.
I am installing NW7 with EHP2, Database Oracle 10g, Server Solaris Blade with 16GB
Thanks..

Hi,
Is there any update for the last post. we are getting the following error while the sapinst try to create central instance:
here are the log from sapinst:
Working directory changed to /tmp/sapinst_instdir/NW702/AS-ABAP/ORA/CENTRAL.
INFO       2011-12-13 09:54:38.275
           CJSlibModule::writeInfo_impl()
Output of /usr/sap/PRG/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function GetInstanceProperties is written to the logfile sapcontrol_PRG_DVEBMGS00.log.
WARNING    2011-12-13 10:08:42.602
           CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PRG/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function GetInstanceProperties" finished with return code 1. Output:
13.12.2011 10:08:42
GetInstanceProperties
FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()
INFO       2011-12-13 10:08:42.901 [syuxcaccmg.cpp:237]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account prgadm already exists.
INFO       2011-12-13 10:08:42.925 [syuxcaccmg.cpp:237]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 0 already exists.
INFO       2011-12-13 10:08:42.950 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 200 already exists.
INFO       2011-12-13 10:08:42.955 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 100 already exists.
INFO       2011-12-13 10:08:42.981 [syuxcaccmg.cpp:237]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 0 already exists.
INFO       2011-12-13 10:08:43.0 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 200 already exists.
INFO       2011-12-13 10:08:43.183 [syuxccuren.cpp:409]
           CSyCurrentProcessEnvironmentImpl::setGroup(PSyGroup)
           lib=syslib module=syslib
Real group ID set to 200.
INFO       2011-12-13 10:08:43.286 [syuxccuren.cpp:1068]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & /)
           lib=syslib module=syslib
Working directory changed to /.
INFO       2011-12-13 10:08:44.974
           CJSlibModule::writeInfo_impl()
Node sapcontrol_PRG_DVEBMGS00.log already exists.
INFO       2011-12-13 10:08:45.90 [syuxccuren.cpp:409]
           CSyCurrentProcessEnvironmentImpl::setGroup(PSyGroup)
           lib=syslib module=syslib
Real group ID set to 200.
INFO       2011-12-13 10:08:45.183 [syuxccuren.cpp:1068]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & /tmp/sapinst_instdir/NW702/AS-ABAP/ORA/CENTRAL)
           lib=syslib module=syslib
Working directory changed to /tmp/sapinst_instdir/NW702/AS-ABAP/ORA/CENTRAL.
INFO       2011-12-13 10:08:45.238
           CJSlibModule::writeInfo_impl()
Output of /usr/sap/PRG/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function StartService PRG is written to the logfile sapcontrol_PRG_DVEBMGS00.log.
WARNING    2011-12-13 10:19:57.359
           CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PRG/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function StartService PRG" finished with return code 1. Output:
StartService
FAIL: Service definition not found in /usr/sap/sapservices.
WARNING    2011-12-13 10:19:57.366
           CJSlibModule::writeWarning_impl()
Could not start instance service of instance PRG/DVEBMGS00.
INFO       2011-12-13 10:19:57.885 [syuxcaccmg.cpp:237]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account prgadm already exists.
INFO       2011-12-13 10:19:57.902 [syuxcaccmg.cpp:237]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 0 already exists.
INFO       2011-12-13 10:19:57.924 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 200 already exists.
INFO       2011-12-13 10:19:57.929 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 100 already exists.
INFO       2011-12-13 10:19:57.956 [syuxcaccmg.cpp:237]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 0 already exists.
INFO       2011-12-13 10:19:57.974 [syuxcaccmg.cpp:305]
           bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sName)
           lib=syslib module=syslib
Account 200 already exists.
INFO       2011-12-13 10:19:58.134 [syuxccuren.cpp:409]
           CSyCurrentProcessEnvironmentImpl::setGroup(PSyGroup)
           lib=syslib module=syslib
Real group ID set to 200.
INFO       2011-12-13 10:19:58.206 [syuxccuren.cpp:1068]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & /)
           lib=syslib module=syslib
Working directory changed to /.
INFO       2011-12-13 10:19:59.927
           CJSlibModule::writeInfo_impl()
Node sapcontrol_PRG_DVEBMGS00.log already exists.
INFO       2011-12-13 10:20:00.81 [syuxccuren.cpp:409]
           CSyCurrentProcessEnvironmentImpl::setGroup(PSyGroup)
           lib=syslib module=syslib
Real group ID set to 200.
INFO       2011-12-13 10:20:00.166 [syuxccuren.cpp:1068]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & /tmp/sapinst_instdir/NW702/AS-ABAP/ORA/CENTRAL)
           lib=syslib module=syslib
Working directory changed to /tmp/sapinst_instdir/NW702/AS-ABAP/ORA/CENTRAL.
INFO       2011-12-13 10:20:00.231
           CJSlibModule::writeInfo_impl()
Output of /usr/sap/PRG/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function Stop is written to the logfile sapcontrol_PRG_DVEBMGS00.log.
WARNING    2011-12-13 10:32:28.495
           CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PRG/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function Stop" finished with return code 1. Output:
13.12.2011 10:32:28
Stop
FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()
WARNING    2011-12-13 10:32:28.501
           CJSlibModule::writeWarning_impl()
Could not stop instance 'DVEBMGS00' of SAP system PRG.
WARNING    2011-12-13 10:32:29.168 [iaxxcmsclient.cpp:93]
           CIaMsgClient::CIaMsgClient(auch00000101, 3900)
Connect to message server (auch00000101/3900) failed: MSENILAYER.
ERROR      2011-12-13 10:32:29.193
           CJSlibModule::writeError_impl()
CJS-30087  Instance PRG/DVEBMGS00 [ABAP: MSNOTRUNNING] did not stop after 12:30 minutes. Giving up.
ERROR      2011-12-13 10:32:29.585 [sixxcstepexecute.cpp:988]
FCO-00011  The step stopInstance with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|stopInstance was executed with status ERROR ( Last error reported by the step :Instance PRG/DVEBMGS00 [ABAP: MSNOTRUNNING] did not stop after 12:30 minutes. Giving up.).
INFO       2011-12-13 10:32:31.313 [syuxcpath.cpp:371]
           CSyPath::createFile() lib=syslib module=syslib
Creating file /tmp/sapinst_instdir/NW702/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.
WARNING    2011-12-13 10:32:34.956 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2011-12-13 10:32:34.957 [iaxxejsctl.cpp:492]
FJS-00010  Could not get value for property .

Similar Messages

  • The new tab behavior is driving me nuts. It keeps re-centering on tabs nearest the start of the list when I move a tab. How do I change this?

    The new tab behavior is driving me nuts. It keeps re-centering on tabs nearest the start of the list when I move a tab. How do I change this?
    I don't want to download an app. I would rather add a new string in about config or just change of the ones in there to false. It's making my work life rather difficult, to be forced to go all the way back to the end of my list after moving one tab just to have to do it again. I mean it's to the point where I might consider changing browsers if they had tab scroll bars.
    Edit: At this point I will download any app. Please make this stupid feature stop.

    The result of setting up that code will do exactly as you described: the tabs will be crowded together. I had not noticed any change in behaviour of Firefox with tabs because all the tabs are crowded together, so they cannot scroll, and I very seldom move tabs.

  • The indicator to determine whether it is a case of the start or the finish

    Hello Gurus,
    In CJ20N, for internal activities, there is a "Person assignement" tab. And in this tab there is "date" field.
    The explaination of this date is:
    "Latest date for the start or finish of the split.
    You can use the indicator to determine whether it is a case of the start or the finish date."
    My problem is: where can I find the "indicator" mentioned?
    Thanks
    JM

    There is no specific indicator for this.
    Go to internal tab - you will see a field called DistKeyCapRqIn
    if this is blank then the system goes to the work centre master data for distribution of work load - if the work centre is blank then system defaults to earliest dates - which gets transferred to the person assignment tab.
    Now go bak to the internal tab and set field DistKeyCapRqIn to SAP030 - you will now see that the dates in the person assignment are showing latest dates.
    The dates for the activities can be seen based on scheduing in the dates tab

  • HT201240 hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??

    hi all. i just downloaded mountain lion and it seems to have added an old password for admin at the start up, the old password was removed so all i had to do was press enter and off i go, i cant remember it, what to do now??

    Eli,
    You can reset a Password (lost/forgotten) set on your Mac using 'Reset Password Utility' available with OS X Utilities tool. With OS X Mountain Lion, OS X Utilities tool can be generally found on a local hidden Recovery HD Partition if your Mac has one.
    To check If your Mac has got a local hidden Recovery HD Partition, start your Mac holding COMMAND + R buttons. If you hold the keys pressed enough and there is a local Recovery HD Partition on your Mac, you will be presented with OS X Utilities window.
    Click the 'Tool' menu item and choose 'Reset password'. Terminal window appears. Type 'resetpassword' into it and press 'Enter'. Reset Password window appears with User Account Names available on your Start-up Volume. Select the User Account Name and rest is simple to follow.
    One of the advantages of this method is that it does not require any Authorization method such as administrative authentication to reset a password.
    NOTE: If your Mac does not have a local hidden Recovery Partition on its system disk, you can create one using Disk Assistant application available from Apple. Search for the Disk Assistant in the support area.

  • Where is the start of the audio file/recording?

    I'm emailing mixdowns to a studio where they will lay the files to movie timecodes that I have specified in a cue sheet. I'm a bit worried that the timecodes are incorrect. The possible issue concerns the start of the audio files.
    I recorded the tracks down to a stereo file, a region, that appears to start in the arrange at the correct point. But when you record, Logic includes some recording before the start of the region, before the Anchor, correct? And my question is this: when the files are opened in ProTools, does Protools see the Anchor, see the start of the region and ignore the bit before the region starts, or not?
    It's crucial, because if it doesn't all my in-points will be out but over a second (by the amount of time before the region start that somehow seems to exist in the audio file.

    Hi
    If I understand the problem correctly?
    jrm1 wrote:
    The possible issue concerns the start of the audio files.
    I recorded the tracks down to a stereo file, a region, that appears to start in the arrange at the correct point. But when you record, Logic includes some recording before the start of the region, before the Anchor, correct?
    This can depend on how you did the "record down to a stereo file".
    If you routed tracks to bus channels, then recorded the bus to another track, Logic will include the count-in in the audio file. As you say, the region in the Arrange will be correctly "trimmed".
    One solution would be to convert these bounced regions to new audio files (Audio Menu), another to use Bounce Region (or track) in Place.
    Alternatively, use a manually placed "2 pop" 2 seconds before the start of each cue.
    CCT

  • When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video.

    When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video. This happens randomly and does not seem to be a problem with the videos as they run fine. what is going on?

    Several times every day YouTube shuts down some of their servers to update stuff. Be patient if YouTube is slow, stuck or mangled. Transmissions from YouTube to your computer are done in multiple tiny packets of data and flash at a time. That's why sometimes you may get any of these scenarios: bits and pieces of text/thumbnails in weird places; sluggish loading/buffering; the spinning circle going on forever; or the player being blank. This problem could fix itself within a few hours or by the next day.
    If your YouTube continues to behave slow, stuck or strange, it's very possible that your directories of "temporary internet files" and RAM (sometimes known as "cache") are close to the maximum and just cannot take anymore, the end result being any of the above scenarios or videos that: A) come to a complete freeze; B) start/stop/start/stop in a choppy way; or C) never even make it onto your screen.
    "Temporary internet files" are tiny bits of webpages that get permanently put on your hard-drive. They will remain forever on your computer, gradually plugging it up like hair stuck in a sink drain, until you finally get rid of them once and for all. Thus, exit out of YouTube, then clear your "cache" of all its "temporary internet files", "cookies" and "history". It is best if you shutdown and reboot afterwards. You'll be amazed at how "fresh" and "new" your YouTube will be.

  • Scrolling with mouse wheel in column browser starts from the start of the list

    Hi, I'm wondering if anyone else has been encountering this problem with iTunes.
    Ever since updating to 10.5, whenever I use the mouse wheel to scroll in the column browser, it starts from the start of the list, regardless of which artist or album is highlighted.
    For instance, I press the M key to jump to artists starting with M, then use the mouse wheel to scroll down the list, in iTunes 10.5 it jumps me back to the As.
    The strange thing is that if I then use the mouse wheel to scroll down to the Cs, then jump down the list via a key press, mouse wheel scrolling will start me back to where I last scrolled (C).
    How can I fix this problem?
    I'm using iTunes 10.5.0.142 on Windows 7 Home Premium.

    I can confirm the behaviour. It would seem iTunes is keeping a separate record of the position in the list for use by the scroll wheel, and then snapping to that before scrolling up or down a screenful. The same random jumps happen if you use the keyboard Page Up/Page Down commands and then use the mouse wheel.
    I shall file a bug report.
    tt2

  • My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizont

    My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizontal line at the end.
    Every time the lines are printing in the exact same place.
    it happens mostly when prining involves blue colors.
    the line are approx. 1 cm wide.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • [svn:fx-trunk] 13358: Manually removing extraneous whitespace from the start of the en_US playerglobal rb DITA XML files to unblock the build .

    Revision: 13358
    Revision: 13358
    Author:   [email protected]
    Date:     2010-01-07 17:10:34 -0800 (Thu, 07 Jan 2010)
    Log Message:
    Manually removing extraneous whitespace from the start of the en_US playerglobal rb DITA XML files to unblock the build. We need to work with the doc team to make sure future drops do not contain this whitespace.
    QE notes: N/A
    Doc notes: N/A
    Bugs:
    SDK-24896 - playerglobal_rb.swc has dita content that is not encoded correctly
    Reviewer: For Jim, Jeff
    Tests run: ant other.locales
    Is noteworthy for integration: Yes
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24896
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/__Global__.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.net.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.update.events.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/air.update.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/authoring.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.accessibility.xm l
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.data.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.desktop.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.display.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.errors.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.events.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.external.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.filesystem.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.filters.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.geom.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.html.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.media.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.net.drm.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.net.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.printing.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.profiler.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.sampler.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.security.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.system.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.text.engine.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.text.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.ui.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.utils.xml
        flex/sdk/trunk/frameworks/projects/playerglobal/bundles/en_US/docs/flash.xml.xml

    Thats good news.

  • Problems with "Background Eraser Tool" and "Blur". The tools don't affect the whole area but just connect the start and the last points.

    Hello!
    I have some issues with Photoshop CC 2014. The tools "Background Eraser Tool" and "Blur" won't work correctly. When I’m holding down the left mouse button and trying to erase or blur some area, the tools don’t affect the whole area but just connect the start and the last points – like drawing a line. These troubles exist with mentioned tools only, other tools work correctly.
    I’ve restored each tool separately, restored all the tools together, installed new drivers for tablet, re-installed Photoshop and even Windows. Nothing helped. These tools worked correctly earlier with the same adjustments, but one day something went wrong.
    How can I make the tools work correctly?
    Some information about my computer:
    • Notebook Lenovo Y560
    • Windows 7 Home Basic SP1 x64
    • Intel Core i5 2.53 GHz
    • 4Gb RAM
    • ATI Mobility Radeon HD 5730 1Gb
    • Tablet Wacom Bamboo CTL-470

    Hi,
    I have a similar problem with the Background Eraser tool as well. It's the same both on my PC and on my laptop, both running Win 8.1 and PS CC2014. Would be great to have a solution for this. Did you managed to find a fix?

  • When I use my ipod in the car it goes back to the start of the track every time i start the car. why is this?

    When I use my ipod in the car it goes back to the start of the track every time i start the car. why is this?

    Only if you backed them up somewhere.

  • Automatically move the needle to the start of the clip

    I have several miniDVD's imported in separate events. Since the capture date is not being imported correctly, I am thinking of manually updating all the clip dates and times.
    Is there a way to make each clip's "needle" to go to the start of the clip rather than be at some random point of the clip?
    The reason I ask, is because I have DVD Player app open with the various "chapters" showing the date and time, and I would like to mechanically just go to each clip and adjust the date/time accordingly. Having the needle for each clip be at different points of the clips makes it hard because I cannot compare the image on the DVD chapter to the image I see in iMovie.
    Any idea?

    bump?

  • Click/Noise at the start of the track.

    I heare a strange loud noise when the track changes?
    Anybody knows how to repair this ???
    Thanks.

    Check the start of the track in question in a sample editor. If the waveform doesn't start at the zero crossing point, write a fade-in so it does.
    Hop that helps.

  • Imovie on iphone problem, music will not sit in desired timeline and keeps reverting back to the start of the project instead. Have tried to move but it won't stay

    imovie on iphone problem, music will not sit in desired timeline and keeps reverting back to the start of the project instead. Have tried to move but it won't stay

    Sorry G23 - I like birds ;)
    I suggest you start another thread as I don't know the answer to that one but this might help:
    Go to settings - general - usage -   Her e you might find some data hogs
    Good luck

  • No Big Ten Network on FIOS for the start of the season?

    Verizon signed a contract with BTN in July and I still won't have BTN to start the football season in Philadelphia! Time Warner and Mediacom just signed this week and will have the games available for Saturday. Comcast signed a contract at the same time and started BTN coverage Aug 15. I live in a Big Ten state where there is demand to see PSU, what gives?

    I am actually an Iowa fan, so I am hoping that FIOS will have all the spillover games as well. If they don't I am switching back to Comcast because Comcast has all the spillover games. I am upset that I have to go to a bar and grill to watch the game instead of staying at home to watch them because that will mean I have to limit my comments and I will undoubtedly get crap from Penn State fans for watching the Iowa game, which is not so bad because most of the Penn State fans have been pretty nice. I just called Big Ten Network and they didn't have a specific date for me as to when I would get BTN, just that FIOS planned to roll it out between August 25th and September 16th. I told the guy that I was frustrated and he hinted at the fact the BTN was a little disappointed with FIOS for not providing the games to its customers for the start of the season. He also said that FIOS has not been telling people when they will get BTN, for others they have added the channel late, and in some markets it has just shown up without an announcement. I am happy with all other aspect of FIOS TV, but this one just makes no logical sense. I am sure we are in the minority, as most customers could care less if they get BTN. 

  • Pages IPad: how to  'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

    Pages IPad: how to  'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

    Pages IPad: how to  'Find' occurrence of a word in a range starting from somewhere in the middle of document to the end. It seems that 'Find' feature always defaults to finding the word from the start of the document. Thanks

Maybe you are looking for