SAPLPA PACKAGE SERVICES (in ABAP program SAPLSFW COMMON)

Hello,
I´m facing with a strange issue... during an importing support packages process through SPAM I get an error in Import_Proper phase... during the error analysis, I get an error, a short dump, when I try to enter into any transaction... which is the following short dump:
Runtime Errors SYNTAX_ERROR
Date and Time 05.05.2011 13:04:31
Short text
Syntax error in program "SAPLPA_PACKAGE_SERVICES ".
Error in the ABAP Application Program
The current ABAP program "SAPLSFW_COMMON" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLPA_PACKAGE_SERVICES " in
include "CL_PACKAGE_HELPER=============CU " in
line 179:
"The type "SLS_PACKAGE_INFO" is unknown."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSFW_COMMON" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The same problem has been already reported on this forum in the follow link:
Can you help me please, how to solve this strange issue...?
Thank you in advance,
João Dimas - Portugal

Hello,
I was able to solve this issue by going in debug mode by typing in /H in the trnx field. When you type /h a abap debug session is started. Then you can type SPAM chose "continue" (button before stop) to go to SPAM screen and restart the upgrade.
I noticed that this error usually occurs with a sap reboot when spam is in error stop or in progress.
Regards,
Sridhar

Similar Messages

Run info package from an ABAP program

Hi all,
I need to run an info-package based on values entered by user in a selection screen.
How can I implement these values in the info-package using the abap program?
I've searched the forum and found FM RSSM_SDL_START_INFOPACKAGE and BAPI_IPAK_START but there is no option to enter the selections, also I have found the option to select var type 6 - abap code in the info-package (tab data selection) but didn't understand if I can connect it to an external abap program.
Thanks,
Hagit

Along with BAPI_IPAK_START, you need to use the FM "BAPI_IPAK_CHANGE"...
there you have the table with structure BAPI6109SEL, which is used to pass selections to infopackage at the run time...
Sequence u can use is BAPI_IPAK_START, then BAPI_IPAK_CHANGE and finally BAPI_IPAK_START as per ur requirements...

Calling external web service from ABAP Program

Hi All,
Can somebody point me to the documentation where how to call an external (3rd party) web service from ABAP program is explained?
Thanks & Regards,
-Smita

which version of R/3 you are using. if you are on was 6.40 its very simple, there are delivered tools to generate client proxy for consuming webservice. if you are on wa 6.20 you can use cl_http_client to achieve the same. check out the following weblogs.
/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

Package size in ABAP program

Hi
we have requirement to pull data from OHD via data services to text file.
data services does this by an auto generated abap program which pulls all the data of OHD at one go.
since data volume of OHD is huge can we split the volume like defining package size we do in dtp.
any insight on how to incorporate it in ABAP program would be of immense help.

Hi,
Try dividing result output/ records by characteristics in the OHD by applying filters at DTP level.
An alternate way out could be get all data into table and have custom developed program to load specific number of records by reading the output table in to flat file. Once those many records have been written to file, create new file and move on to writing new set of records.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

WD Service Call ABAP program generation error in 2004s

Hi,
I create a 'service call' by using the wizard and I select my existing 'component controller' as a controller. The service type I use is a (custom) function module. The function module has 1 import parameter, an export structure and 6 tables.
In the 'adapt context' step I choose all fields and structures to be stored in the context. Then I generate the code.
After generating the code there is a syntax error in the code of the created method. The method code under comment 'store output to context' binds the rfc structure to the context BUT it seems to think that it is a table instead of a structure.
the code:
node_Contract->bind_Structure(Stru_C_Contract[] )
Of course I can remove the '[]' signs manually but I think it is strange that the wizard produces wrong code.
Please let me know if this is a bug or something else.

Values in variants are not converted. You can use the same variant in your ABAP program, but you need to change the value in the parameter for logical system in each system you transport the change to. The only alternative is to create a logical system name in SM59 that is the same in all your BW systems but it refers to the local R/3 system.
In other words, you will have two logical systems in your BWD system pointing to your R/3 Dev. Let's call them R3DCLNT100 and R3SYSTEM, where R3DCLNT100 is also the source system (in RSA1). You can use R3SYSTEM in your variant for your ABAP program. In your BWQ (test system), you will have two logical systems also, R3QCLNT100 and R3SYSTEM, where R3QCLNT100 is also your source system.
Does this help.

Calling ITS Service via abap program

We have made an ITS Service (SAP GUI for HTML) for one of the R/3 programs (Customized).
If the URL is linked directly to the service, it shows correctly.
But if we call the service via transaction code as in: Call tcode Zabc..., it does not work.
How can we call the service directly from the abap program on the click of a button?
Thanks in advance.

Hi,
You can do something like this:
CALL FUNCTION 'CALL_BROWSER'
         EXPORTING
           url                          = path
           new_window                   = 'X'
         EXCEPTIONS
           frontend_not_supported       = 1
           frontend_error               = 2
           prog_not_found               = 3
           no_batch                     = 4
           unspecified_error            = 5
           OTHERS                       = 6
where PATH variable is ITS service url:
    CONCATENATE 'http://server:port/sap/bc/gui/sap/its/webgui?transaction=xxxxxx&okcode=xxxx INTO path.
Hope this helps,
Iván.

How use a proxy consumer web service in ABAP Program with local interface

I generate a proxy class based on a WSDL file.
I want to use this class in an abap programm without a connection but using XML files in local.
I see with the class CL_PROXY_LOCAL_ADAPTER that it is possible to execute without connection but for use this, it's necessary to use the method REGISTER.
This method have two parameters : Class Name and Interface Name.
Class name is the name of my proxy class, but I don't know how to find the interface name.
I think that a local interface is needed to generate but I don't know how to generate in interface with entries in SPROXSIG table ?
Could you help me ?

Check out the following links to see if it meets your needs.. Has examples to call a ABAP proxy (that consumes a webservice) from ABAP program...
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm (webservices ->webservices toolset -> examples)
http://help.sap.com/saphelp_dm40/helpdata/en/1a/b69d427cab0831e10000000a1550b0/frameset.htm

Call to Java web service from abap program

HI,
I want to call to Java WS from abap program and i read some post how to do that in release of NW 6.4 but I want to know what is the simplest way to do that in release 7.0 .
Many Thanks,
Nina

Hi Uwe,
Thank you.
I have WSDL or URL how i can call to them ,in the example that you send i don't find the place that it called.
Do i have to create proxy for that ?
BR
Nina

How to consume WEB SERVICES from ABAP ??

Q: How to consume WEB SERVICES from ABAP program??
     the point here is i am using SAP release 620 and the creation of proxy is out of scenario
     and also no XI.    Its only through ABAP program i need to consume one web service (its a HTTPS one ),
    Using cl_http_client... i tried it but i am totally confused of whats happening ???
Req some senior ppl advice on the same/approach.
any hints will suffice my way of approach...!!!
Please do put in your valuable advices..!!
Thanks in advance..!!!!

Hello Srinivas,
Following is the code for calling web service:
data: client type ref to if_http_client,
      host   type string value 'server url',
      service type string value '8080',
      path type string value '/sap/public/ping',
      errortext type string,
      proxy_service type string,
      scheme type i value 1.
call method cl_http_client=>create
exporting host = host
        service = service
     proxy_host = host
   proxy_service = service
   scheme        = scheme
importing client = client
exceptions
    argument_not_found = 1
    internal_error     = 2
    plugin_not_active = 3
    others             = 4.
case sy-subrc.
when 0.
     write 'Server reached successfully'.
when others.
     write: 'sy-subrc =', sy-subrc.
endcase.
Once you got the client object you can call following methods:
"Set the requrie URL for the web service you want to call. This is not WSDL anyway!!
cl_http_utility=>set_request_uri( request = client->request
uri =' url 2 be called ').
*Then you can call send method with proper inputs for sending request to WS
CALL METHOD client->send
Then you can use receive method for getting the response
CALL METHOD client->receive
*You can get last error in case of exceptions
CALL METHOD cl_http_client=>get_last_error
*Close the client object
CALL METHOD client->close
For more information on full code refer my link in previous replay.
Thanks,
Augustin.
Edited by: Augustarian on Aug 18, 2009 1:49 PM

Error while calling ABAP program from Data Services

Hi All,
We have a ABAP program which accepts two parameters 1] a date 2] a string of comma separated ARTICLE numbers .
We have used a ABAB transform in ABAP dataflow which refers this ABAP program.
If I pass a string of 6 articles as second parameter the job executes successfully
But if i pass 9 articles as follows
$GV_ITEM_VALUES='3564785,1234789,1234509,1987654,1234567,2345678,3456789,4567890,5456759';
i get the following error
ABAP program syntax error: <Literals that take up more than one line are not permitted>.
The error occurs immediately after ABAP dataflow starts, ie even before the ABAP job gets submitted to ECC
I am using BODS 4.2 . The datatype of $GV_ITEM_VALUES is varchar(1000).
The ABAP program that gets generated by the DS job has the following datatype for this parameter
PARAMETER $PARAM2(1000) TYPE C
Is there a different way to pass string characters to ABAP transform in data services?
I have attached the screen shot of trace log and error
Regards,
Sharayu

Hi Sharayu,
The error your getting is because the literals exceeds more than 72 characters.
It seems that the length of the string is exceeding more than 72 character.
Can you check the following in ECC GUI
Go to Transaction SE38=>Utilities=>Settings=>ABAP Editor=>Editor=> Downwards -Comp.Line Length(72).
The checkbox which defines length 72 must be clicked so the error is coming. Can you uncheck the checkbox and then try passing the parameter $GV_ITEM_VALUES using the BODS job
Regards
Arun Sasi

HT1923 When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manage

When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

How do we call smartforms in abap program or web services

how do we call smartforms in abap program or web services
How many types of smartforms are there?
points will be rewarded

Hi
See this sample program
Using the fun module smartform is called from the program
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Reward points for useful Answers
Regards
Anji

ABAP Programs Performance Tuning and Web Services

Hi,
Can anyone give me any good material link or eBook on SAP ABAP programs Performance Tuning. What are the things that needs to be done for performance tuning etc..
Also, any material or simple eBook on web services.
my email is [email protected]
Thanks a ton in advance.
Swetha.

Check this link ABAP Development Performance Tuning
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/performance%2btuning
Check these threads.
How do you take care of performance issues in your ABAP programs?
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bd335c111d1829f0000e829fbfe/frameset.htm

Error consuming Web service from an ABAP Program

Hello guys,
I'm trying to consume a Web Service that is exposed in the internet. The conecction to the Web Service its via SSL.
I'm having a problem at the moment I call the web service from my abap program. But I'm able to test the same web service, from the SE80 tx with out trouble.
I have identify that there is a difference in the SOAP envelope, that its received in the Web service, when I call it from the test enviorment and when I call it from the program.
This is how it is received from the TEST tool (a succesfull call of th WS) :
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header><n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/"><TraceLevel xmlns="http://www.sap.com/webas/630/soap/features/runtime/tracing/">Error</TraceLevel></n0:Trace></soap-env:Header><soap-env:Body><nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"><body><?xml version="1.0" encoding="ISO-8859-1"?><Mensaje><RutEmpresa><Numero>76555400</Numero><Digito>4</Digito></RutEmpresa><RutUsuario><Numero>12307972</Numero><Digito>8</Digito></RutUsuario><Convenio>58422</Convenio><Pin>aro79728</Pin><Archivo><Tipo>PPR</Tipo><Plantilla>2142970592</Plantilla><Nombre>cargatest174.txt</Nombre><Cuerpo><![CDATA[G126919727 JORGE CRISTIAN VARGAS ROMERO 0000VVC01600000000000000000000245FAC0000000089900032000021030000010000000000190000 2910200714082008Boletas honorarios|]]></Cuerpo></Archivo><Fecha>20080814</Fecha></Mensaje></body></nr1:putXMLDocument></soap-env:Body></soap-env:Envelope>
And this is how it is received when I consume the web service from the ABAP program.
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header><n0:Trace xmlns:n0="http://www.sap.com/webas/630/soap/features/runtime/tracing/"><TraceLevel xmlns="http://www.sap.com/webas/630/soap/features/runtime/tracing/">Error</TraceLevel></n0:Trace></soap-env:Header><soap-env:Body><nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"><body><?xml version="1.0" encoding="utf-8" ?><nr1:putXMLDocument xmlns:nr1="http://bel.bci.cl/WsBEL/services/Carga"><body><?xml version="1.0" encoding="ISO-8859-1"?><Mensaje><RutEmpresa><Numero>76555400</Numero><Digito>4</Digito></RutEmpresa><RutUsuario><Numero>12307972</Numero><Digito>8</Digito></RutUsuario><Convenio>58422</Convenio><Pin>aro79728</Pin><Archivo><Tipo>PPR</Tipo><Plantilla>2142970592</Plantilla><Nombre>cargatest174.txt</Nombre><Cuerpo><![CDATA[G126919727 JORGE CRISTIAN VARGAS ROMERO 0000VVC01600000000000000000000245FAC0000000089900032000021030000010000000000190000 2910200714082008Boletas honorarios|]]></Cuerpo></Archivo><Fecha>20080814</Fecha></Mensaje></body></nr1:putXMLDocument></body></nr1:putXMLDocument></soap-env:Body></soap-env:Envelope>
As you can see, it is generating a nr1:putXMLDocument tag, that it should not go there.
Why do you think that this situation is happening? Please guys, this is very important, and need your help. Thanks in advance.
Samuel.

BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
Calling WebServices from ABAP via HTTPS
Consuming Web Service from ABAP by Durairaj Athavan Raja
Search on SDN wiki, and you will find above mentioned links.

Calling a Web Service from an Abap Program

Hi Everyone,
I have been put to task to write an RFC that has web service calls within it. My question is if anyone has a coding examples, and or best practices when calling a web service, like connections, event handling, asynchronous, synchronous, return values, xml, acknowledgements.
Thanks a lot,
Steve

BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
Calling WebServices from ABAP via HTTPS
Consuming Web Service from ABAP by Durairaj Athavan Raja
Search on SDN wiki, and you will find above mentioned links.

SAPLPA PACKAGE SERVICES (in ABAP program SAPLSFW COMMON)

Similar Messages

Maybe you are looking for