Sapscript Form closes prematurely

I copied and edited standard form PM_COMMON to accomodate requirement for custom Job Ticket.
However, when I set that in OIDF, the Job Ticket print fails (print or print preview).
I traced the problem to the standard program RIPRJT00.
it enters FORM print_paper, then to FORM main_print. Below is its source code
FORM main_print.
*... Workpaper is controlled at a HEADER LEVEL (ORDERS)
*... Brief details from Order, detail opertion information
PERFORM set_gv_arc_type_aufk USING caufvd-auart.          "n766146
*... and materials needed in Operation are listed
* start of node 766146:
* PERFORM OPEN_FORM USING C_ARC_TYPE_AUFK "Archive link for order.
PERFORM open_form USING gv_arc_type_aufk "Archive link for order
* end of node 766146
                           caufvd-aufnr" order obj number as key
                           ' '.        " New form for each Order
" ... removed fragments for conciseness
PERFORM operations_with_mat. " reservations are printed with Op.
PERFORM end_of_report.               " Print end of report line
PERFORM close_form.                  " Close the form.
PERFORM unlock_and_log.              " Dequeue and Log print
ENDFORM.                    "MAIN_PRINT
Then it enters FORM operations_with_mat, then a call to function module WRITE_FORM. It fails in line 40 of the FM WRITE_FORM where it checks if the form is closed
40 if rstxc-tdclose = true.
41    call function 'SAPSCRIPT_MESSAGE_DEF'
42         exporting no = 443
43                   v1 = 'WRITE_FORM'.
44    perform exception.
45    message a443 with 'WRITE_FORM' raising unstarted.
46 endif.
I don't know how, but PERFORM operations_with_mat is between PERFORM open_form and PERFORM close_form.
Do you know any reasons why rstxc-tdclose would set to 'X'?
Edited by: Kyle Domingo on Mar 17, 2010 9:47 AM

Hi
Did you adjust the window size after copying the standard script?? This seems to be an issue with formatting. So, check the formatting is perfect. Check If the window size is not more than size of the page,also check for overflow.
Also check,If there is any error in the script.
Vishwa.

Similar Messages

How to change the Development Class of the SAPSCRIPT FORM

Hi All,
      I have transported the old form which needs to be deleted in Test System. Is that possible to create a TR for deletion and send it to Test enivronment?..
     Also is it possible to change the development class for a form?
     Please help me on this. Urgent!...
Regards,
Ramkumar.

Yes, it is possible to change the development class for forms..
Use SE03, transport organiser tools
goto node OBJECT DIRECTORY ENTRY
select node "Change object directory entries"
Execute
goto the next text box after data element, type FORM, give your SAPSCRIPT form name and tick the check box execute... now rightclick on your form and chenge development class..
Now coming to your second question is is not possible to delete a FORM that it is already transported to QA and Production, only way to do this is by doing client copy.. basis will do it for you..
Close the thread once your question is answered.
Regards,
SaiRam

Sending sapscript form through Email

Hi,
     I modifyed a std sapscript form for customer statement and that output i want to send to the customer through Email.So now i need a help for further what are the steps need to be do for sending that form by email.Pls be in details so that for me easy to solve this.
Thanks,
Rajendra.

Hi ,
    I am using the below code to send the form output by mail but it is not working for me.pls correct my code where i want to change so that i can solve my issues.
DATA: itcpo LIKE itcpo,
tab_lines LIKE sy-tabix.
Variables for EMAIL functionality
DATA: maildata LIKE sodocchgi1.
DATA: mailpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1 LIKE solisti1 OCCURS 0 WITH HEADER LINE.
parameter: p_email1 like somlreci1-receiver .
PERFORM send_form_via_email.
FORM SEND_FORM_VIA_EMAIL *
FORM send_form_via_email.
CLEAR: maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = p_email1.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = maildata
put_in_outbox = ' '
TABLES
packing_list = mailpack
object_header = mailhead
contents_bin = mailbin
contents_txt = mailtxt
receivers = mailrec
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
ENDFORM.
Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR: mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM get_otf_code.
LOOP AT solisti1.
MOVE-CORRESPONDING solisti1 TO mailbin.
APPEND mailbin.
ENDLOOP.
DESCRIBE TABLE mailbin LINES tab_lines.
mailhead = 'TEST.OTF'.
APPEND mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.
Form GET_OTF_CODE
FORM get_otf_code.
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'Z2006FICSE'
language = sy-langu
options = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'START_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
window = 'MAIN'
EXCEPTIONS
error_message = 01
OTHERS = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
EXCEPTIONS
error_message = 01
OTHERS = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
result = itcpp
TABLES
otfdata = otf
EXCEPTIONS
OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
solisti1-line = otf.
APPEND solisti1.
ENDLOOP.
ENDFORM.
   Hope i can expect the feedback soon from you guys.
Thanks,
Rajendra.

Change in SAPScript form not reflect in old orders

Hi Expert,
I have modified the layout of a sales order SAPScript form. For newly created one, I can get the new sales order printed with new layout. But for those who already exists, even though I go to the sales order, Extra -> Output -> Header to delete the original output, and manually add the output type again, the printout are always shown with old layout. I just wonder how can I have my old sales order printed with the new layout, thanks!

Kumar,
Remove and add the query into the workbook again, save the work, close and reopen. You should get it working again.
Workbook also saves the format details and does not work well sometimes. So every time you do any format changes to the query, it is advisable to remove and add back the query into the workbook.
Hope it helps
_RJA

Printing sapscript form out of ABAP report

Hello,
I was wondering if there is a way to trigger the print output of a sapscript form out of an ABAP report? Maybe some kind of function module?
Thanks
Anne

Hi Anne,
The Only way is that..
1 .You need to pass the necesary data to see the output... (WRITE_FORM)
2. To pass the data you need to open the form... (OPEN_FORM)
3. After all you need to close the form... (CLOSE_FORM)
If you follow these three you can call you sap script from anywhere,, example you can write these in FM's (SE37).
From interface programs as well...
but you need open, write, close the forms to run a Sap script.
Thanks & regards,
Dileep .C

SAPScript form coding changed automatically during transport

Hi,
I have developped a SAPScript form in dev. and worked well.
After I had transport it to testing environnment to test it there, I found out that my SAPScript coding
was modified: some new lines code have been added replacing the original code while others have been just deleted.
When I checked the attribute of the SAPScript, I notice that these modifications have been added automatically by user DDIC!
I really do not understand how this could be.
Any idea is welcome.
Thanks,
Charas

Hi Charas,
Note that SAPScripts are client specific, so make sure you import your script to each and every QA client. Inform your basis that the transport is not a cross client object. So, he will import to all the QA client.
Or check with your Basis, to which QA client the transport has been imported to, go to SCC1 transcation code and copy it over to required QA client.
I guess, above information will help you to close the thread.
Regards,
SaiRam

Modify SAPScript Form

Hi,
I'm new with sapscript and I would like to understand what are the steps in order to copy and modify existing SAPScript Form.
As I know a print program should be copied and assotiated with a form, but I don't know how.Please give an advice or show me an example.
BR
Stefan

Go to transaction code SE71
Go to menu option Utilities --> Copy from Client
enter standard form name and your target(custom) form name, usually we copy all the standard forms from client 000
Execute.
Go to SE71, and give your custom form name and do respective changes...
Note: if you want to modify the window position make sure you modify in the original language or try to change original language to your local language.
Close the thread once your question is answered.
Regards,
SaiRam

Sending sapscript form by email

dear experts
i want to send sapscript forms by email from sap. how is it done. is there any configuration that needs to be done

Hello,
I have done in case where we are sending to an external mail id.
Check the code it may help u.
REPORT Z_SCRIPT .
DATA: itcpo LIKE itcpo,
      tab_lines LIKE sy-tabix.
Variables for EMAIL functionality
DATA: maildata   LIKE sodocchgi1.
DATA: mailpack   LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead   LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec    LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1   LIKE solisti1 OCCURS 0 WITH HEADER LINE.
PERFORM send_form_via_email.
      FORM SEND_FORM_VIA_EMAIL                                      *
FORM send_form_via_email.
CLEAR:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            document_data              = maildata
            put_in_outbox              = ' '
       TABLES
            packing_list               = mailpack
            object_header              = mailhead
            contents_bin               = mailbin
            contents_txt               = mailtxt
            receivers                  = mailrec
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            operation_no_authorization = 4
            OTHERS                     = 99.
ENDFORM.
     Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR:    mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
Creation of the document attachment
This form gets the OTF code from the SAPscript form.
If you already have your OTF code, I believe that you may
be able to skip this form. just do the following code, looping thru
your SOLISTI1 and updating MAILBIN.
PERFORM get_otf_code.
LOOP AT solisti1.
    MOVE-CORRESPONDING solisti1 TO mailbin.
    APPEND mailbin.
ENDLOOP.
DESCRIBE TABLE mailbin LINES tab_lines.
mailhead = 'TEST.OTF'.
APPEND mailhead.
Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'TEST'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.
     Form GET_OTF_CODE
FORM get_otf_code.
DATA: BEGIN OF otf OCCURS 0.
          INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
       EXPORTING
            form     = 'Z08V3_COLLI'
            language = sy-langu
            options = itcpo
            dialog   = ' '
       EXCEPTIONS
            OTHERS   = 1.
CALL FUNCTION 'START_FORM'
       EXCEPTIONS
            error_message = 01
            OTHERS        = 02.
CALL FUNCTION 'WRITE_FORM'
       EXPORTING
            window        = 'MAIN'
       EXCEPTIONS
            error_message = 01
            OTHERS        = 02.
Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
       EXCEPTIONS
            error_message = 01
            OTHERS        = 02.
MOVE-CORRESPONDING itcpo TO itcpp.
CALL FUNCTION 'CLOSE_FORM'
       IMPORTING
            result = itcpp
       TABLES
            otfdata = otf
       EXCEPTIONS
            OTHERS = 1.
Move OTF code to structure SOLI form email
CLEAR solisti1. REFRESH solisti1.
LOOP AT otf.
    solisti1-line = otf.
    APPEND solisti1.
ENDLOOP.
ENDFORM.
I am sending to [email protected].
So proceed in similar manner and let me know if u face any problem.
Regards

SAPSCRIPT form - Text is not porperly displayed

hi all,
in my SAPSCRIPT form, I am getting a text from PERFORM stmt. in the PERFORM , the text is coming correct, but in the form , it is showing only half of the text.
the code
FORM get_text TABLES ts_intab STRUCTURE itcsy
                     ts_outtab STRUCTURE itcsy.
DATA: l_haul_text(500) TYPE c,
           l_haul_long(250) TYPE c.
l_haul_long = l_haul_text+0(250).
    LOOP AT ts_outtab.
      CASE ts_outtab-name.
        WHEN 'L_HAUL_LONG'.
          ts_outtab-value = l_haul_long.
          MODIFY ts_outtab.
      ENDCASE.
    ENDLOOP.
Then in the form, just display
/: PERFORM GET_TEXT IN PROGRAM
/:   USING &VBDKL-VBELN&
/:   CHANGING &L_HAUL_LONG&
/: ENDPERFORM
&L_HAUL_LONG&
while debugging, the text is correct till TS_OUTTAB but when it comes to the form L_HAUL_LONG, it is truncated.......what should i do..
Kindly help.
THnaks

answered

Addint new field to the standard sapscript form.

FOR SALES INVOICE DOCUMENT FORM PRINTING
TRANSACTION CODE: VF01
OUTPUT TYPE : FJCI
PROGRAM NAME: RVADAUS1
SAPSCRIPT FORM NAME: SD_EXPORT_FJCI
ENTRY ROUTINE: ENTRY_FJCI.
STRUCTURE USED FOR THIS OUTPUT TYPE = V55EFJCI
THE QUERY IS AS FOLLOWS:
I WANT TO ADD DATA MODE OF TRANSPORT FROM THE INVOICE DOCUMENT. THE TABLE AND FIELD IS T618-BEZEI.
SO I COPIED THE STANDARD FORM TO ZSD_EXPORT_FJCI AND THE STANDARD PROGRAM TO ZRVADAUS1.
I SUCCESSFULLY FETCHED THAT FIELD DATA.
I APPEND THE STRUCTURE 'ZAV55EFJCI' TO ADD THE ADDITIONAL T618-BEZEI FIELD.
AND WRITE MY SELECT QUERY IN THE ENTRY_FJCI FORM ROUTINE.
THE CODE IS AS FOLLOWS:
data: begin of it_mode_of_tp occurs 1,
      bezei type t618t-bezei,
      end of it_mode_of_tp.
select a~bezei as zzbezei into table it_mode_of_tp from t618t as a
inner join
eikp as b on aexpvz = bexpvz and aland1 = baland inner join vbrk as
c on bexnum = cexnum
where cvbeln = nast-objky and aspras = nast-spras .
loop at it_mode_of_tp.
   v55efjci-zzbezei = it_mode_of_tp-bezei.
endloop.
BUT THE DATA FOR THAT IS NOT GETTING DISPLAYED.
THIS WAS THE FIRST METHOD I FOLLOWD.
THE SECOND METHOD I DID WAS AS FOLLOWS:
FORM ENTRY_FJCI.
     PERFORM PROCESSING.
ENDFORM
FORM PROCESSING.
     PERFORM PRINT_DOCUMENT.
ENDFORM.
FORM PRINT_DOCUMENT.
       CALL FUNCTION 'RV_EXPORT_DOCUMENT_PRINT'
ENDFORM.
IN THIS FUNCTION THE DATA IS GETTING FETCHED FROM THE DATABASE TABLES AND STORED IN THE STRUCURE V55EFJCI.
SO I COPIED THAT FUNCTION.
IN THIS FUNCTION , THEIR IS A INCLUDE PROGRAM 'LV55EF11' FOR FETCHING DATA FOR ENTRY_FJCI FORM ROUTINE.
I COPIED THAT PROGRAM CODE , AND CREATED MY OWN INCLUDE PROGRAM (WHICH I AM STORING IT IN ANOTHER Z PACKAGE.)
AND WRITTEN MY ABOVE CODE IN THAT PROGRAM. BUT WHEN I DO THIS, NOITHING GETS DISPLAYED , EVEN THE PREVIOUSLY COMING DATA ALSO NOT GETTING DISPLAYED.
HOW SHOULD I PROCEED.

you said you copied layout(form) SD_EXPORT_FJCI to ZSD_EXPORT_FJCI,
you updated program to fetch datat & populate v55efjci-zzbezei field.
Now
- you need to modify layout(form) ZSD_EXPORT_FJCI via SE71 to insert your field in one of the windows where it has to be printed (sap script knowledge is required here).
- you need to either modify SAP output type FJCI to use your program/layout(form) or you need to create your own output type and assign your form/program to it, and in addition to that if you define your own output type - yo have to add it to output determination procedure, to access sequences, add condition records to condition table... so it's picked up by the invoice.

How to make an unformatted sapscript form

At the bottom of [this page|http://help.sap.com/saphelp_45b/helpdata/en/34/60b30cae724effe10000009b38f91f/content.htm] it says:
"If you want to pass on the information to be printed to one printer only, and this printer then takes care of editing and layout, you can mark a special form for this purpose (see Release Information SAPSCRIPT). In this way, the text is passed on unformatted. This is of interest, for example, if you are using thermal-transfer label printers
... without any links. I've been looking for this "Release Information SAPSCRIPT" but can't find it, does anyone know where?
I need to print labels to a thermal printer (Paxar Monarch) but if I put the print codes inside a sapscript form, the printer always gives errors. If I write the same printcodes directly to the printer, it works fine. However, I need to use sapscript forms for customizing reasons, but the form just needs to pass on the printcodes as unformatted text.

Refer this link might be useful -
ftp://ftp.nicelabel.com/docs/whitepaper/wp-Printing_labels_from_SAP_R3-eng.pdf
Regards,
Amit

Passing the data from a internal tabe to sapscript form

Hi folks,
I have an question, how to pass an each character value of a field into the sapscript form separately,
I have an field value from an internal table in the print program say - itab-ssn = 123789345 and I need to pass each character separately into the sapscript form. How do you write the code in the sapscript text editor
I tried this piece of code did not work...
&itab-ssn(0)&,, &itab-ssn(1)&,, &itab-ssn(2)& and relaised it adds up characters as I go on...
I just need 1 2 3 7 8 ...
How to do that?
Thanks,
SK

Try &itab-ssn0(1)&,, &itab-ssn1(1)&,, &itab-ssn+2(1)& and so on
Formatting option +n(a) where n is the offset and a the length
Regards,
Nick

Call a function module from within a sapscript form

not being an ABAPer i have the task of changing the Invoice SAPScript form.
i have made the necessary changes - just about... but they have asked that i include the VAT Number on the Invoice....
not too bad apart from different company codes have different vat numbers...
not knowing a better way to retrieve data from table V_001_B - i am using the print program -RFKORD50, is there a better way of getting the VAT Number by company code? I figured if i could call the FM to return the value, all well and good.., they do not want the print program changed if possible so was looking at alternate methods....
or am i trying to reinvent the wheel here?

thank you both! helpful answers! :o)
anyway!
i have written the program which is called from the SAPScript:
    /:       PERFORM GET_VATNUMBER IN PROGRAM ZFI_F140_OPERATIONS
    /:       USING &BKPF-BUKRS&
    /:       CHANGING &VATNUMBER&
    CE       VAT Registration No : &VATNUMBER&
    REPORT zfi_f140_operations.
    FORM get_vatnumber TABLES in_par STRUCTURE itcsy
                              out_par STRUCTURE itcsy.
      DATA: lv_co_code TYPE bukrs,
            lv_vat_no TYPE stceg.
      READ TABLE in_par WITH KEY name = 'BKPF-BUKRS'.
      MOVE in_par-value TO lv_co_code.
      SELECT SINGLE stceg FROM t001
        INTO lv_vat_no WHERE bukrs = lv_co_code.
      out_par-name = 'VATNUMBER'.
      WRITE lv_vat_no TO out_par-value.
      CONDENSE out_par-value.
      MODIFY out_par INDEX 1.
    ENDFORM.
it is not working and i cannot work out why...
i have not been ABAPing for very long but have had a go....
any thoughts as to what i have done wrong?
or point me where i should be looking? thank you!

Missing text elements in my sapscript form / Transaction F.17

Hello!
I'm on a sap ecc 6.0 system and have problems with a sapscript form.
My printprogram is sapf130d and my form is y_..._debi_slep.
Starting the transaction F.17 i get several lists and at last the error-list. This error-list says "in form y_..._debi_slep in the main window the following textelements are missing ...". Three elements 506, 595 and 606 are missing.
When i look into the form i couldn't see the elements. So with "/E 506", "/E 595" and "/E 606" i've inserted the elements in the main window and saved and activated the form. A new try with "F.17" raises the same errors. For my understanding the relevant elements should be in the info window in this case - i inserted them there, too ... but the errors remain the same. In the print program i can find all these textelements.
Perhaps someone out there has a solution or a hint for me?
Thanks a lot in advance.
Best regards,
Ingo

The cause of error could be of any reason.
1) For driver program SAPF130D, following forms must be used, or customised by copying any of this below forms.. May be this could be one reasons for the error.
Forms
The following forms are used in the standard SAP R/3 System:
Form for Form name
Letter and Reply F130_CONFIRM_01
Check list F130_LIST_01 and F130_LIST_02
Results table F130_RESULT_01 or F130_RESULT_02
Error list F130_ERROR_01 or F130_ERROR_02
If you define your own forms, the form name should contain the identification code "F130".
Regards,
Sairam

In which table the lines of the SAPScript form text elements are found?

Hello,
I want to write a report analyzing the lines contained in the text elements of an SAPScript form. From which table can I select the data? Regards.
Lars.

Sorry.. forgot to mention the FM name.
You can use FM 'READ_TEXT'.
pass 'ST' for ID.
and 'TEXT' for OBJECT
and pass the name of text element to NAME u will get the
text element.

Sapscript Form closes prematurely

Similar Messages

Maybe you are looking for