SAPScript: Formating an Address/Endaddress part as bold

Hello,
I want to format an Adrdess/Endaddress part as bold. Don't know how to do this. Thanks.
Regards, Lars.

For the associated paragraph format, just check the radiobutton for "BOLD".
Double click the paragraph format, click the font button, click the radiobutton to the "ON" position next to BOLD.
Regards,
Rich Heilman
Message was edited by: Rich Heilman

Similar Messages

ADDRESS ENDADDRESS command in SAPScript

Hi Gurus,
How does address endaddress command works in SAPscript.
I want to use it in SAPscript as
ADDRESS
 ADDRESSNUMBER <LFA1-ADRNR>
 FROMCOUNTRY 'US'
ENDADDRESS.
I have gone through the documentation of ADDRESS_INTO_PRINTFORM but still not clear of the sequence.
Want to know, what will be the sequence in which address will be printed from above command and how does it determine this.
Appreciate your help.
Thanks,
Kartavya

Hi,
 Read Below documentation
 The ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter. The reference fields are described in the structures ADRS1, ADRS2, or ADRS3, depending on the type of address. Either direct values or symbols may be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [TYPE t] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: PERSON name of natural person [TITLE form of address]
/: PERSONNUMBER number of the personen
/: DEPARTMENT department
/: STREET street name HOUSE house number
/: LOCATION additional location information
/: POBOX po box [CODE post code / zip code] [CITY city]
/: POSTCODE post code / zip_code
/: CITY city1[,city2]
/: NO_UPPERCASE_FOR_CITY
/: REGION county / state
/: COUNTRY recipient country [LANGUAGE language code]
/: COUNTRY_IN_REC_LANG
/: LANG_FOR_COUNTRY language key
/: FROMCOUNTRY sender country
/: ADDRESSNUMBER address number
/: ENDADDRESS
The parameter values contain both formatting and address information. The address data are formatted for output according to the data in the following parameters:
TYPE
FROMCOUNTRY
COUNTRY
LANGUAGE
PRIORITY
DELIVERY
LINES
If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET.
Regards
Bala Krishna

Problem in Address Endaddress statement in sapscript

Hello Friends,
I have 1 problem in existing sap script for delivery where address is printed using command address endaddress.
Problem is In output while displaying PO BOX text , it is displayed in DE language insted of EN whether logon lang is EN.
Regards,
Yog

Hi
To translate the text in SAP Script :
You can goto transaction SE63 and translate the scripts into different languages.
In SE63, click Translation -> Long Texts -> Sapscripts -> Forms
Those language you can convert to have already been pre-installed in the system.
SE63 is the best way to translate since it offers check options.
Or
Also try to change logon language to korea.
Hope this will solve your problem.
Rewards Points if useful.
Thanks & Regards
Nikunj Shah

ADDRESS ENDADDRESS IN SAPSCRIPT

Hi,
Can we rearrange the fields being printed in PO layout? The form used the ADDRESS ENDADDRESS syntax. Only the Addressnumber was populated. After printing the form, the arrangement of fields were
STREET CITY
COUNTRY POSTAL_CODE CITY2.
I want to rearrange it to be:
STREET
COUNTRY POSTAL_CODE CITY.
How can I do this? And where can I do this if this is possible?
Thanks in advance.
Lalyn

Hi,
the formatting of an adress depends on the value belonging tot COUNTRY.
SO i do not think the way you want is possible.
Below include some help. Read and take the best solution for it
ADDRESS: Formatting of addresses
The command ADDRESS - ENDADDRESS formats an address according to the postal standards of the destination country defined in the parameter COUNTRY. The reference fields are described in the structure ADRS. Both constants and symbols can be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: STREET street
/: POBOX PO box [CODE zip code]
/: POSTCODE zip code
/: CITY town1[,town2]
/: REGION region
/: COUNTRY country
/: FROMCOUNTRY from country
/: ENDADDRESS
Both formatting data and address data are parameters. Address data is formatted for output based on the COUNTRY, PRIORITY and LINES parameters. As the default, the P.O. Box is used, if it is available, rather than the street address.
     DELIVERY defines the street address.
     If this parameter is selected, the system prints the street address on the layout output instead of the P.O. Box.
     PARAGRAPH defines in which paragraph format the address is output.
     If the parameter is not defined, the address is output in the default paragraph format.
     PRIORITY defines which address lines can be omitted if there is not enough space on the output.
     You can enter a combination of the following values:
     A     form of address
     P     mandatory blank line 1
     Q     mandatory blank line 2
     2     name2
     3     name3
     4     name4
     L     country name
     S     line for the street
     O     line for the city
     LINES define how many lines are available to format the address.
If the address data cannot be completely formatted due to an insufficient number of lines, the data entered in the parameter PRIORITY is omitted. If the LINES specification is missing and this command is in a form window whose type is not MAIN, the lines available for the address layout are automatically calculated with the current output line item and window size.
     TITLE is a required form of address.
     NAME means that up to four separate names, separated by commas, can be defined.
     STREET means the street specification, including address number.
     POBOX is the Post Office box number.
     CODE is the P.O. box, postal, or zip code, if this code is different from the postal code of the city.
     POSTCODE is cityu2019s postal, or zip, code.
     CITY means that up to two place names can be defined.
     REGION determines the administrative area.
     COUNTRY specifies the country based on specific postal standards and the address format.
     FROMCOUNTRY defines in which language the destination countryu2019s name is formatted. In EEC countries, only the international country identification letter is placed, with a hyphen, before the postal code.
Gr., Frank

Text after the Address Endaddress command in SAPscript

Hi All,
Can we print text on the same line after the address endaddress command.
For eg: i am using the Address command
/:ADDRESS PARAGRAPH AS
/:TITLE    &EKKO-LIFNR&
/:NAME   &LFA1-NAME1&, &LFA1-NAME2&, &LFA1-NAME3&, &LFA1-NAME4&
/:STREET   &LFA1-STRAS&
/:POBOX    &LFA1-PFACH& CODE &LFA1-PSTL2&
/:CITY     &LFA1-ORT01&, &LFA1-ORT02&
/:POSTCODE &LFA1-PSTLZ&
/:COUNTRY &LFA1-LAND1&
/:REGION   &LFA1-REGIO&
/:FROMCOUNTRY &T001-LAND1&
/:ENDADDRESS
which gives the output as
1000035878
SANMINA -SCI SYSTEMS DE MEXICO SA DE CV
AV DE LA SOLIDARIDAD IBEROAMERICANA NO 7020
45680 EL SALTO
Mexico
I want a text to be printed next to Mexico eg:
1000035878
SANMINA -SCI SYSTEMS DE MEXICO SA DE CV
AV DE LA SOLIDARIDAD IBEROAMERICANA NO 7020
45680 EL SALTO
Mexico XYZZZ
Can anyone knows how to go about it?
Thanks
Ahsan

Hi,
I do not think itz possible using address...endaddress...
if you want to so something like that may be we need to write that without using address...endaddress..
Regards,
Narendra.

ADDRESS - ENDADDRESS postal convention

Hello,
I know that the ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter.
But where in SAP can I find/correct the postal convention for a coutry?
Thanks
Anne

Check the documentation on FM ADDRESS_INTO_PRINTFORM in se37
[Formatting Addresses: ADDRESS|http://sapscript.tripod.com/SAPScript-37.htm]
[ SAP SCRIPT CONTROLS 4|http://thesapworld.blogspot.com/2008/05/sap-script-controls-4.html]

Regarding Address EndAddress in SAP Script

Hi Abapers,
I am having a problem while displaying the address in SAP Script through Address EndAddress.
Problem is it is displaying the data correctly but it display the Region Code. Now the requirement is to display the Region Description instead of the Region Code.
Can you please provide me any solution for this.
I am sending the Address EndAddress which I have written in my code.
/: ADDRESS DELIVERY PARAGRAPH ZC
/: NAME &VBDKL-ZBTNAME1&, &VBDKL-ZBTNAME2&, &VBDKL-ZBTNAME3&, &VBDKL-
/: STREET &VBDKL-ZBTSTRAS&
/: CITY &VBDKL-ZBTORT01&, &VBDKL-ZBTORT02&
/: POSTCODE &VBDKL-ZBTPSTLZ&
/: COUNTRY &VBDKL-ZBTSLAND&
/: REGION &VBDKL-ZBTREGIO&
/: FROMCOUNTRY &VBDKL-ZBTLLAND&

Hi
ADDRESS and ENDADDRESS is used to specify the address which will
be formatted according to the target country i.e the recipient country.
e.g. /:ADDRESS sales PARAGRAPH C
/:NAME &KNA1-NAME1&
/:STREET &KNA1-STRAS&
/:POSTCODE &KNA1-PSTLZ&
/:CITY &KNA1-ORT01&
/:COUNTRY &KNA1-LAND1&
/:FROMCOUNTRY 'DE'
formatting address
http://help.sap.com/saphelp_46c/helpdata/en/d1/803238454211d189710000e8322d00/frameset.htm
http://help.sap.com/saphelp_40b/helpdata/en/d1/803238454211d189710000e8322d00/content.htm
Reward if usefull

Gap between two characters in SAP Script Address EndAddress.

Hi Abapers,
I have one query regarding Address - EndAddress in SAPScript.
I am putting the code :
/: ADDRESS TYPE '1' PARAGRAPH ZI PRIORITY 'APL43' LINES 6
/:ADDRESSNUMBER &ZPOLGORT-ADRNR&
/:ENDADDRESS
and I am getting the output in this form
ABC Soft c/o JSI Hong Kon g
c/o RS Logistics (Shenzhen) Limited
6/F., DZ Zhong Tian Yuan Logistics Ctr.
126/Xia Road, Futian Free Zone,
Shenzhen
China
But the problem is there is a gap between character "n" and 'g" in first line in word Kong.
Can anybody suggest me how to solve this issue. Or is there any other issues to sort it out this problem.

Hi,
Its not the problem with Address / End Address.
It could be probably maintained that way.
Please check the entry in the table where it is maintained.
reagrds,

Script , using ADDRESS ENDADDRESS

Hai Friends ,
Am developing PO O/P Script form , in this, driver program is SAP'S Standard Program , i have to use address and end address keyword , in that i could use my paragraph format , but i cud't use my character formats , Please help me i need to use my character formats in address and endaddress keyword .
Regards
Sarath P G

Rajesh,
Are u using a standard driver program or is it customized,
i feel that the city value which is in lower case is getting translated somewhere later .
there can be no other reason for this translation as in your case.
During debugging try changing the city value at runtime
and see if it reflects. Hope this works
Regards
Sajimon Chandran

ADDRESS ENDADDRESS

All:
In working with Address-EndAddress control command, I only see two lines for street address information (parameters: street & location). Is this correct or are other parameters available?
In general, are there any available parameters that are not listed on the "Formating Addresses: Address" SAP documentation (ie: building, floor)?
(address delivery type paragraph priority lines
title
name
person
personnumber
department
steet
location
pobox
code
city
postcode
no_upper_case
region
country
country_in_rec_lang
lang_for_country
fromcountry
addressnumber)
Thank you in advance for your assistance.
~Stacy

Hi,
The ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter. The reference fields are described in the structures ADRS1, ADRS2, or ADRS3, depending on the type of address. Either direct values or symbols may be assigned to the parameters.
Syntax:
/: ADDRESS DELIVERY TYPE t PARAGRAPH a PRIORITY p LINES l
/: TITLE title
/: NAME name1[,name2[,name3,name4]]
/: PERSON name of natural person TITLE form of address
/: PERSONNUMBER number of the personen
/: DEPARTMENT department
/: STREET street name HOUSE house number
/: LOCATION additional location information
/: POBOX po box CODE post code / zip code CITY city
/: POSTCODE post code / zip_code
/: CITY city1,city2
/: NO_UPPERCASE_FOR_CITY
/: REGION county / state
/: COUNTRY recipient country LANGUAGE language code
/: COUNTRY_IN_REC_LANG
/: LANG_FOR_COUNTRY language key
/: FROMCOUNTRY sender country
/: ADDRESSNUMBER address number
/: ENDADDRESS
The parameter values contain both formatting and address information. The address data are formatted for output according to the data in the following parameters:
TYPE
FROMCOUNTRY
COUNTRY
LANGUAGE
PRIORITY
DELIVERY
LINES
If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET
Regards,
Madhu

How ADDRESS-ENDADDRESS works in script

Hi experts,
Could you please throw some light on how ADDRESS-ENDADDRESS works in script.
Please let me know how the following code executes and what is the impact of the FROMCOUNTRY statemnet in that code . Also le tne know various other options it has:
ADDRESS DELIVERY PARAGRAPH AS
ADDRESSNUMBER &PEKKO-ADRN2(K)&
FROMCOUNTRY &LFA1-LAND1&
ENDADDRESS
Thanks in advance.
Br
Ram

Check the link for format
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm
The SAP function module ADDRESS_INTO_PRINTFORM gets called
Check its documentation in SE37
This will help!
Regards,
Prashant

We use a doc template to create a purchased part spec document and then save them as pdf formatted files. These part spec documents are also appended with the datasheets for these purchased parts. When we want to update/revise the document, is there a m

We use a doc template to create a purchased part spec document and then save them as pdf formatted files. These part spec documents are also appended with the datasheets for these purchased parts. When we want to update/revise the document, is there a method, using Acrobat, to make those updates to the pdf, or must we go back to the doc template and basically generate a new document?
Also, our resulting pdf documents aren't searchable. How can we generate pdf documents that are searchable? I may want to search for a part value or name within the body of these pdf documents, but currently can't do that...very inconvenient.
Can you assist?

Not totally sure about the search issue. A lot depends on how you created the PDF and what is in the datasheets you attached (like are they graphics?). The doc portion should be searchable as long as you used print to the Adobe PDF printer or PDF Maker. For your use, it may be that the print is adequate. However, the result should be searchable (unless maybe you had a form with filled in fields and created the PDF with PDF Maker. I think the form data may be retained in form fields and the fields are not searchable. In that case, a print might be a better procedure. (it would help to know the versions of WORD and Acrobat as well as the exact process you used to create the PDF.)
If the appended data sheets do not change, then you might try opening the original PDF and then using Replace Pages to replace the file created from the DOC file.

Updated to ios6 and now when I receive an email where my address is part of a group, the email will not open and email closes automatically

updated to ios6 and now when I receive an email where my address is part of a group, the email will not open and email closes automatically. I can open this email on my macbook. If i forward this email from my macbook to my iphone, i can then open the email.

Revert RDI file forms to SAPScript format

Hi Gurus,
We are currently implementing a change on how the forms are to be processed. Currently, the forms are in SAP but being pushed to Streamserve application for layouting and formatting. The way it is triggered is that from SAP, it triggers an RDI file to be sent to the Streamserve application for layouting before it is being sent to output device.
And now we want to change it by getting rid of application and have the SAPScript format the forms. Have read some documentation onf converting SAPScript to RDI file. Is there links/documentation on how to do the reverse side? Any information you can share on how to go about it?
Thanks a lot!
Napoleon

Hi Christian, Sandra,
Thanks for the reply. We understand that any output layouts will be lost, but that's ok. Our intention is now to process the layouting of forms from an external application to push it back to a SAP based solution via SapScript. In this way, we get rid of the external apps and its associated cost, in turn, drive some efficiency in the IT process.
Do you know how to disregard the RDI settings?
Cheers,
Nap

Addressing of part of the string in the container

Hello,
in a mail task I would like to print only some characters from a string - e.g. from second to tenth - is it possible to address some part of the string in the container as is usual in abap?
thx,
JJ

Hi,
Yes , it is possible. If you want to show only some part of the string value in mail description you can use normal abap string operations. For example: In Mail description if you want to show only a part variable VALUE. you can just use &VALUE+a(b)&. It will work !!
You can try it out !!
Regards
Krishna Mohan

SAPScript: Formating an Address/Endaddress part as bold

Similar Messages

Maybe you are looking for