Problem in Address Endaddress statement in sapscript

Hello Friends,
I have 1 problem in existing sap script for delivery where address is printed using command address endaddress.
Problem is In output while displaying PO BOX text , it is displayed in DE language insted of EN whether logon lang is EN.
Regards,
Yog

Hi
To translate the text in SAP Script :
You can goto transaction SE63 and translate the scripts into different languages.
In SE63, click Translation -> Long Texts -> Sapscripts -> Forms
Those language you can convert to have already been pre-installed in the system.
SE63 is the best way to translate since it offers check options.
Or
Also try to change logon language to korea.
Hope this will solve your problem.
Rewards Points if useful.
Thanks & Regards
Nikunj Shah

Similar Messages

ADDRESS ENDADDRESS command in SAPScript

Hi Gurus,
How does address endaddress command works in SAPscript.
I want to use it in SAPscript as
ADDRESS
 ADDRESSNUMBER <LFA1-ADRNR>
 FROMCOUNTRY 'US'
ENDADDRESS.
I have gone through the documentation of ADDRESS_INTO_PRINTFORM but still not clear of the sequence.
Want to know, what will be the sequence in which address will be printed from above command and how does it determine this.
Appreciate your help.
Thanks,
Kartavya

Hi,
 Read Below documentation
 The ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter. The reference fields are described in the structures ADRS1, ADRS2, or ADRS3, depending on the type of address. Either direct values or symbols may be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [TYPE t] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: PERSON name of natural person [TITLE form of address]
/: PERSONNUMBER number of the personen
/: DEPARTMENT department
/: STREET street name HOUSE house number
/: LOCATION additional location information
/: POBOX po box [CODE post code / zip code] [CITY city]
/: POSTCODE post code / zip_code
/: CITY city1[,city2]
/: NO_UPPERCASE_FOR_CITY
/: REGION county / state
/: COUNTRY recipient country [LANGUAGE language code]
/: COUNTRY_IN_REC_LANG
/: LANG_FOR_COUNTRY language key
/: FROMCOUNTRY sender country
/: ADDRESSNUMBER address number
/: ENDADDRESS
The parameter values contain both formatting and address information. The address data are formatted for output according to the data in the following parameters:
TYPE
FROMCOUNTRY
COUNTRY
LANGUAGE
PRIORITY
DELIVERY
LINES
If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET.
Regards
Bala Krishna

Text after the Address Endaddress command in SAPscript

Hi All,
Can we print text on the same line after the address endaddress command.
For eg: i am using the Address command
/:ADDRESS PARAGRAPH AS
/:TITLE    &EKKO-LIFNR&
/:NAME   &LFA1-NAME1&, &LFA1-NAME2&, &LFA1-NAME3&, &LFA1-NAME4&
/:STREET   &LFA1-STRAS&
/:POBOX    &LFA1-PFACH& CODE &LFA1-PSTL2&
/:CITY     &LFA1-ORT01&, &LFA1-ORT02&
/:POSTCODE &LFA1-PSTLZ&
/:COUNTRY &LFA1-LAND1&
/:REGION   &LFA1-REGIO&
/:FROMCOUNTRY &T001-LAND1&
/:ENDADDRESS
which gives the output as
1000035878
SANMINA -SCI SYSTEMS DE MEXICO SA DE CV
AV DE LA SOLIDARIDAD IBEROAMERICANA NO 7020
45680 EL SALTO
Mexico
I want a text to be printed next to Mexico eg:
1000035878
SANMINA -SCI SYSTEMS DE MEXICO SA DE CV
AV DE LA SOLIDARIDAD IBEROAMERICANA NO 7020
45680 EL SALTO
Mexico XYZZZ
Can anyone knows how to go about it?
Thanks
Ahsan

Hi,
I do not think itz possible using address...endaddress...
if you want to so something like that may be we need to write that without using address...endaddress..
Regards,
Narendra.

Format data using ADDRESS ENDADDRESS Command in SAPscript

Hi All,
I have an requirement to print the contact address in the follwing format. Actually I want to print first name and Last name immediately after TITLE (Mr.) like below.
Mr. Jhon smith
Street name, po Code..
But currently it is printing like this below
Mr.
Jhon
smith
Street name, po Code..
I am using the ADDRESS...ENDADDRESS command some thing like this below:
/: ADDRESS PARAGRAPH AS PRIORITY A234P
/: TITLE    &SADRD-ANRED&
/: NAME     &SADRD-NAME1&, &SADRD-NAME2&, &SADRD-NAME3&,
/: STREET   &SADRD-STRAS&
/: POBOX    &SADRD-PFACH& CODE &SADRD-PSTL2& CITY &SADRD-PFORT&
/:ENDADDRESS
I would Appreciate for your quick responses.
Thanks.
Sankar

well you are doing it anyway manually when i have a look at your coding.
you are not using the standard way of printing an adress by just giving adrnr to the adress statement, but you are printing the fields in detail anyway.
So well just adopt it the like following:
/: ADDRESS PARAGRAPH AS PRIORITY A234P
/: TITLE &SADRD-ANRED&,,&SADRD-NAME1&,,&SADRD-NAME2&,,&SADRD-NAME3&
/: STREET &SADRD-STRAS&
/: POBOX &SADRD-PFACH& CODE &SADRD-PSTL2& CITY &SADRD-PFORT&
/:ENDADDRESS
but i still ask myself what you need the adress staement for when you anyway have an own way to format your output.

Problem in address printing in sap script in Russian language

hi all
I am trying to get a PO output using a sap script. The problem is that the vendor address in not coming in the required Russian language. The language in PO is Russian and the logon langauge is also Russian.
The script uses ADDRESS ENDADDRESS statement to print the address in form. This statement
uses the function module ADDRESS_INTO_PRINTFORM to print the address. The address can be obtained in the required language from this function module but I want the address in Russian language uses the ADDRESS ENDADDRESS statement.
Please let me know if any body has faced this kind of problem earlier.
Thanks.

Hi,
pls check that u have provided the following parameters in ADDRESS ENDADDRESS.
/:address
/:COUNTRY recipient country [language code]
/: COUNTRY_IN_REC_LANG
/: LANG_FOR_COUNTRY language key
/:endaddress
language codes can be know in table T002.
Hopes this helps!!
thanks

ADDRESS ENDADDRESS IN SAPSCRIPT

Hi,
Can we rearrange the fields being printed in PO layout? The form used the ADDRESS ENDADDRESS syntax. Only the Addressnumber was populated. After printing the form, the arrangement of fields were
STREET CITY
COUNTRY POSTAL_CODE CITY2.
I want to rearrange it to be:
STREET
COUNTRY POSTAL_CODE CITY.
How can I do this? And where can I do this if this is possible?
Thanks in advance.
Lalyn

Hi,
the formatting of an adress depends on the value belonging tot COUNTRY.
SO i do not think the way you want is possible.
Below include some help. Read and take the best solution for it
ADDRESS: Formatting of addresses
The command ADDRESS - ENDADDRESS formats an address according to the postal standards of the destination country defined in the parameter COUNTRY. The reference fields are described in the structure ADRS. Both constants and symbols can be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: STREET street
/: POBOX PO box [CODE zip code]
/: POSTCODE zip code
/: CITY town1[,town2]
/: REGION region
/: COUNTRY country
/: FROMCOUNTRY from country
/: ENDADDRESS
Both formatting data and address data are parameters. Address data is formatted for output based on the COUNTRY, PRIORITY and LINES parameters. As the default, the P.O. Box is used, if it is available, rather than the street address.
     DELIVERY defines the street address.
     If this parameter is selected, the system prints the street address on the layout output instead of the P.O. Box.
     PARAGRAPH defines in which paragraph format the address is output.
     If the parameter is not defined, the address is output in the default paragraph format.
     PRIORITY defines which address lines can be omitted if there is not enough space on the output.
     You can enter a combination of the following values:
     A     form of address
     P     mandatory blank line 1
     Q     mandatory blank line 2
     2     name2
     3     name3
     4     name4
     L     country name
     S     line for the street
     O     line for the city
     LINES define how many lines are available to format the address.
If the address data cannot be completely formatted due to an insufficient number of lines, the data entered in the parameter PRIORITY is omitted. If the LINES specification is missing and this command is in a form window whose type is not MAIN, the lines available for the address layout are automatically calculated with the current output line item and window size.
     TITLE is a required form of address.
     NAME means that up to four separate names, separated by commas, can be defined.
     STREET means the street specification, including address number.
     POBOX is the Post Office box number.
     CODE is the P.O. box, postal, or zip code, if this code is different from the postal code of the city.
     POSTCODE is cityu2019s postal, or zip, code.
     CITY means that up to two place names can be defined.
     REGION determines the administrative area.
     COUNTRY specifies the country based on specific postal standards and the address format.
     FROMCOUNTRY defines in which language the destination countryu2019s name is formatted. In EEC countries, only the international country identification letter is placed, with a hyphen, before the postal code.
Gr., Frank

Gap between two characters in SAP Script Address EndAddress.

Hi Abapers,
I have one query regarding Address - EndAddress in SAPScript.
I am putting the code :
/: ADDRESS TYPE '1' PARAGRAPH ZI PRIORITY 'APL43' LINES 6
/:ADDRESSNUMBER &ZPOLGORT-ADRNR&
/:ENDADDRESS
and I am getting the output in this form
ABC Soft c/o JSI Hong Kon g
c/o RS Logistics (Shenzhen) Limited
6/F., DZ Zhong Tian Yuan Logistics Ctr.
126/Xia Road, Futian Free Zone,
Shenzhen
China
But the problem is there is a gap between character "n" and 'g" in first line in word Kong.
Can anybody suggest me how to solve this issue. Or is there any other issues to sort it out this problem.

Hi,
Its not the problem with Address / End Address.
It could be probably maintained that way.
Please check the entry in the table where it is maintained.
reagrds,

Regarding Address EndAddress in SAP Script

Hi Abapers,
I am having a problem while displaying the address in SAP Script through Address EndAddress.
Problem is it is displaying the data correctly but it display the Region Code. Now the requirement is to display the Region Description instead of the Region Code.
Can you please provide me any solution for this.
I am sending the Address EndAddress which I have written in my code.
/: ADDRESS DELIVERY PARAGRAPH ZC
/: NAME &VBDKL-ZBTNAME1&, &VBDKL-ZBTNAME2&, &VBDKL-ZBTNAME3&, &VBDKL-
/: STREET &VBDKL-ZBTSTRAS&
/: CITY &VBDKL-ZBTORT01&, &VBDKL-ZBTORT02&
/: POSTCODE &VBDKL-ZBTPSTLZ&
/: COUNTRY &VBDKL-ZBTSLAND&
/: REGION &VBDKL-ZBTREGIO&
/: FROMCOUNTRY &VBDKL-ZBTLLAND&

Hi
ADDRESS and ENDADDRESS is used to specify the address which will
be formatted according to the target country i.e the recipient country.
e.g. /:ADDRESS sales PARAGRAPH C
/:NAME &KNA1-NAME1&
/:STREET &KNA1-STRAS&
/:POSTCODE &KNA1-PSTLZ&
/:CITY &KNA1-ORT01&
/:COUNTRY &KNA1-LAND1&
/:FROMCOUNTRY 'DE'
formatting address
http://help.sap.com/saphelp_46c/helpdata/en/d1/803238454211d189710000e8322d00/frameset.htm
http://help.sap.com/saphelp_40b/helpdata/en/d1/803238454211d189710000e8322d00/content.htm
Reward if usefull

Problem geocoding addresses in Puerto Rico

We're using the Location REST API to geocode addresses and have run into some problems with addresses in Puerto Rico.
https://dev.virtualearth.net/REST/v1/Locations/US/PR/00765-9236/Vieques/HC%201%20Box%209368?includeNeighborhood=1&key=....
This gives us
"geocodePoints":[
"type":"Point",
"coordinates":[
39.450000762939453,
-98.907997131347656
"calculationMethod":"Rooftop",
"usageTypes":[
"Display"
A rooftop level lat/long in Kansas!
I've tried a suggestion to replace US with PR and not include the adminDistrict (state) field by both omitting it completely from the URL and by using the "-" placeholder. Those attempts return zero results.
How do we geocode Puerto Rican addresses?

Actually that request returns a match for the US, not Kansas. It just happens that the location happens to be in Kansas. Personally I hate the structured address format as it is a bit too restrictive. I recommend instead turning your address into a single
string query. This will make the geocoder parse your address for you and returns much better results. For instance, changing your request to this:
http://dev.virtualearth.net/REST/v1/Locations?query=Vieques 000765-9236, Puerto Rico&incl=queryParse&key=...
This request returns two results in Puerto Rico.
http://rbrundritt.wordpress.com

ADDRESS ENDADDRESS

All:
In working with Address-EndAddress control command, I only see two lines for street address information (parameters: street & location). Is this correct or are other parameters available?
In general, are there any available parameters that are not listed on the "Formating Addresses: Address" SAP documentation (ie: building, floor)?
(address delivery type paragraph priority lines
title
name
person
personnumber
department
steet
location
pobox
code
city
postcode
no_upper_case
region
country
country_in_rec_lang
lang_for_country
fromcountry
addressnumber)
Thank you in advance for your assistance.
~Stacy

Hi,
The ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter. The reference fields are described in the structures ADRS1, ADRS2, or ADRS3, depending on the type of address. Either direct values or symbols may be assigned to the parameters.
Syntax:
/: ADDRESS DELIVERY TYPE t PARAGRAPH a PRIORITY p LINES l
/: TITLE title
/: NAME name1[,name2[,name3,name4]]
/: PERSON name of natural person TITLE form of address
/: PERSONNUMBER number of the personen
/: DEPARTMENT department
/: STREET street name HOUSE house number
/: LOCATION additional location information
/: POBOX po box CODE post code / zip code CITY city
/: POSTCODE post code / zip_code
/: CITY city1,city2
/: NO_UPPERCASE_FOR_CITY
/: REGION county / state
/: COUNTRY recipient country LANGUAGE language code
/: COUNTRY_IN_REC_LANG
/: LANG_FOR_COUNTRY language key
/: FROMCOUNTRY sender country
/: ADDRESSNUMBER address number
/: ENDADDRESS
The parameter values contain both formatting and address information. The address data are formatted for output according to the data in the following parameters:
TYPE
FROMCOUNTRY
COUNTRY
LANGUAGE
PRIORITY
DELIVERY
LINES
If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET
Regards,
Madhu

ADDRESS - ENDADDRESS postal convention

Hello,
I know that the ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter.
But where in SAP can I find/correct the postal convention for a coutry?
Thanks
Anne

Check the documentation on FM ADDRESS_INTO_PRINTFORM in se37
[Formatting Addresses: ADDRESS|http://sapscript.tripod.com/SAPScript-37.htm]
[ SAP SCRIPT CONTROLS 4|http://thesapworld.blogspot.com/2008/05/sap-script-controls-4.html]

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

When trying to register my ipad and put in my email address, a statement comes up stating the address is already verified for another apple id. How can I add my ipad?

When trying to register my ipad to mobile me by putting in my email address, a statement comes up stating the email address is already verified for another apple ID (which is me). How can I still use this email for the ipad?

Try here.
Frequently Asked Questions About Apple ID
and here. Using an existing Apple ID with the iTunes Store and Mac App Store

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Problem in Address Endaddress statement in sapscript

Similar Messages

Maybe you are looking for