Satellite A210-1UP - Every few minutes the system freezes

Hi,
I just installed windows 7 32 bit on a satellite A210-1UP
Every few minutes the system freezes and then continues as if nothing happened.
No errors or blue screens are displayed
I would like to know if windows 7 can run without problems on this system ?
Which is the recommended bios version to run windows 7 ?
Thanks in advance !
Kind Regards
Stijn

Hi buddy,
Yes, Windows 7 works on Satellite A210 properly, the hardware is powerful enough.
I dont think the freezes are problem of Windows 7 or your notebook itself, I think its a software malfunction Have you installed all drivers and are yellow exclamation marks in device manager?
Such freezes could be also caused by security software or if you run a lot of background processes. Good security software is AntiVir in my opinion so I can recommend this program to you.
Also check the startup folder and msconfig (start > run > msconfig). There are all programs listed they startup with Windows and you can disable the programs that you dont need at startup like Adobe Reader, Java Updater, Nero tools, etc. but thats depending on installed software. ;)

Similar Messages

  • Yesterday while downloading an app on my 3GS, my iPhone froze, and I switched it off to reboot. Following that, every few minutes, the screen will flicker and the phone will restart. What's wrong? And how should I fix it?

    I recieved my iPhone 3GS around Christmas. It has been working great, until yesterday. I was downloading an app and suddenly my messaging froze. I couldn't view incoming messages, and every chat I clicked on displayed the same frozen dialogue with only the contact names different. (The app was supposedly reliable, I read over the reviews.) I rebooted my phone in hopes of fixing this, and everything seemed fine for a couple of minutes. Then the screen slightly flickered, and my phone restarted itself. Now, after turning on again, it continues to flicker and crash every few minutes, whether I'm using it or not. Can anyone tell me what could be wrong and how I can fix it?

    Restore the Firmware with iTunes.
    If still problem and you have Warranty or AppleCare Coverage take to Apple for resolution.
    If no coverage, the next step would be battery replacement.

  • FF just upgraded me to 9. I now receive this message every few minutes: The procedure entry point NSS_InitializePRErrorTable could not be located in the dynamic link library nssutil3.dlI Help. Do I just remove FF to stop this?

    This happens when ever FF 9 is open

    Try to reinstall Firefox on top of the current installation.
    You can find the latest Firefox release here:
    *Firefox 9.0.x: http://www.mozilla.com/en-US/firefox/all.html
    If that didn't help then do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • MICROSOFT FOR MAC FREEZING EVERY FEW MINUTES!

    Does anyone know why whenever I'm working on Word or Excel on my Macs, that every few minutes the application freezes, indicating that I have to go & kill 5-10 minutes before I can continue with my work?
    It's very frustrating :-(
    I'd be grateful for any help / advice.
    Thanks.
    Gareth

    Try repairing your drive for starters.
    For another, killing can leave open files corrupt.
    iMac (Intel)
    You may want to look into more thorough steps to troubleshoot, include more details, check Mactopia or Microsoft community forum for Office.
    Office 2011
    Office 2008
    Latest 2011 version on Amazon
    http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B003YCOJA8/

  • My iPad2 is frozen at slide to unlock and every few minutes te apple appears on the middle for a while and then back on freeze to the slide to unlock screen. Please I need your help please

    My iPad2 is frozen at slide to unlock screen, every few minutes the apple appears in the middle of the screen and couple of minutes later it will go back on freeze to the slide to unlock screen .  I have tried all tricks even the restoration through iTunes which I was never able to complete because of the apple screen; iTunes thinks I am resetting my iPad and the restoration get aborted.
    Please help, I can't even turn it off.

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • Lockups every few minutes

    Here's my issue. Running 10.5.4 on a 2x3ghz Mac Pro with 4gb of memory. Every few minutes the mouse and screen completely lock up. I get a spinning beach ball, and it stays this way for about 30 seconds. Can't move the mouse or do anything. Then it "releases" and I can move the mouse again and do what I need to do. The weird thing about it is that it happens very regularly, and almost always when I try to use something (like opening the dock, opening an application menu, etc).
    Anyone have experiences like this?

    How full is your hard drive?
    How big is your hard drive?
    What software do you have installed on your system?
    Is your data backed up?

  • Windows 8 fresh install. Explorer crashes and reloads every few minutes?

    I have installed Windows 8 Pro x64 as a clean install. Every few minutes the explorer shell will crash and reload. The reliability report monitor is filled with "Windows Explorer has stopped working". 
    I'm definitely not the only one experiencing this issue. A quick search online shows other people reporting their Windows 8 explorer frequently crashes. Is there a solution?

    Hi,
    Same problem here for some reason. Tried to view the debug information myself, but I don't understand how to use it.
    https://drive.google.com/folderview?id=0ByKen41yqyXeRDJMTnYxbzl6bkk&usp=sharing
    Thanks in advance!
    this Apple DLL crashes your Explorer: ShellStreams64.dll
    APPLICATION_VERIFIER_HANDLES_NULL_HANDLE (303)
    NULL handle passed as parameter. A valid handle must be used.
    This stop is generated if the function on the top of the stack passed a
    NULL handle to system routines.
    Arguments:
    Arg1: 0000000000000000, Not used.
    Arg2: 0000000000000000, Not used.
    Arg3: 0000000000000000, Not used.
    Arg4: 0000000000000000, Not used.
    *** ERROR: Symbol file could not be found. Defaulted to export symbols for sppc.dll -
    *** ERROR: Symbol file could not be found. Defaulted to export symbols for ClassicStartMenuDLL.dll -
    *** ERROR: Symbol file could not be found. Defaulted to export symbols for GROOVEEX.DLL -
    FAULTING_IP:
    verifier!VerifierStopMessageEx+6d0
    000007fd`8551a7fc cc int 3
    EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
    ExceptionAddress: 000007fd8551a7fc (verifier!VerifierStopMessageEx+0x00000000000006d0)
    ExceptionCode: 80000003 (Break instruction exception)
    ExceptionFlags: 00000000
    NumberParameters: 1
    Parameter[0]: 0000000000000000
    DEFAULT_BUCKET_ID: STATUS_BREAKPOINT
    PROCESS_NAME: explorer.exe
    ERROR_CODE: (NTSTATUS) 0x80000003 - {AUSNAHME} Haltepunkt Im Quellprogramm wurde ein Haltepunkt erreicht.
    EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - Mindestens ein Argument ist ung ltig.
    EXCEPTION_PARAMETER1: 0000000000000000
    NTGLOBALFLAG: 2000100
    APPLICATION_VERIFIER_FLAGS: 48004
    APP: explorer.exe
    FAULTING_THREAD: 0000000000000ab8
    PRIMARY_PROBLEM_CLASS: STATUS_BREAKPOINT
    BUGCHECK_STR: APPLICATION_FAULT_STATUS_BREAKPOINT
    LAST_CONTROL_TRANSFER: from 000007fd855339ce to 000007fd8551a7fc
    STACK_TEXT:
    00 ntdll!NtWaitForSingleObject
    01 ntdll!RtlReportExceptionEx
    02 ntdll!RtlReportException
    03 verifier!AVrfpVectoredExceptionHandler
    04 ntdll!RtlpCallVectoredHandlers
    05 ntdll!RtlDispatchException
    06 ntdll!KiUserExceptionDispatch
    07 verifier!VerifierStopMessageEx
    08 verifier!AVrfpHandleSanityChecks
    09 verifier!AVrfpNtSetEvent
    0a KERNELBASE!SetEvent
    0b ShellStreams64!DllCanUnloadNow
    0c ShellStreams64
    0d ShellStreams64
    0e shell32!CRegFolder::_CreateCachedRegFolder
    0f shell32!CRegFolder::BindToObject
    10 shell32!CShellItem::BindToHandler
    11 shell32!CShellItem::_GetPropertyStoreWorker
    12 shell32!CShellItem::GetPropertyStoreForKeys
    13 shell32!CShellItem::GetProperty
    14 explorerframe!CNscEnumTask::InternalResumeRT
    15 explorerframe!CRunnableTask::Run
    16 shell32!CShellTask::TT_Run
    17 shell32!CShellTaskThread::ThreadProc
    18 shell32!CShellTaskThread::s_ThreadProc
    19 SHCore!ExecuteWorkItemThreadProc
    1a ntdll!RtlpTpWorkCallback
    1b ntdll!TppWorkerThread
    1c kernel32!BaseThreadInitThunk
    1d ntdll!RtlUserThreadStart
    0x0000000013ead738 : 0x0000000013eade50 : 0x000007fd8551a7fc : verifier!VerifierStopMessageEx+0x6d0
    0x0000000013ead758 : 0x000007fd9a43dfe0 : ntdll!RtlpWalkFrameChain+0xed7
    0x0000000013ead768 : 0x0000000013ead7b0 : 0x000007fd9a400000 : "ntdll!NtDllUserStubs <PERF> (ntdll+0x0)"
    0x0000000013ead7b0 : 0x000007fd9a400000 : "ntdll!NtDllUserStubs <PERF> (ntdll+0x0)"
    0x0000000013ead7f0 : 0x000007fd9a45d609 : ntdll!RtlUserThreadStart+0x1d
    0x0000000013ead8b8 : 0x000007fd9a404bba : ntdll!KiUserExceptionDispatch+0x2e
    0x0000000013ead8d0 : 0x000007fd8554efe8 : verifier!VfProviderHandlesBreakDescriptors+0x198
    0x0000000013ead950 : 0x000007fd8554efe8 : verifier!VfProviderHandlesBreakDescriptors+0x198
    0x0000000013ead958 : 0x0000000013eadfd0 : 0x000007fd8554efe8 : verifier!VfProviderHandlesBreakDescriptors+0x198
    0x0000000013ead980 : 0x000007fd855554e0 : verifier!VrfDbgOutputBuffer
    0x0000000013ead9b8 : 0x000007fd8551a7fc : verifier!VerifierStopMessageEx+0x6d0
    0x0000000013eada60 : 0x000007fd9a400000 : "ntdll!NtDllUserStubs <PERF> (ntdll+0x0)"
    0x0000000013eadbc8 : 0x000007fd9a44e511 : ntdll!vsnprintf+0x11
    0x0000000013eadbd8 : 0x000007fd9a485722 : ntdll!vsnprintf_l+0x98
    0x0000000013eadbe8 : 0x000007fd9a44e767 : ntdll!write_string+0x48
    0x0000000013eadbf0 : 0x0000000013eadfe8 : 0x000007fd855554e0 : verifier!VrfDbgOutputBuffer
    0x0000000013eadc08 : 0x000007fd9a4c93bc : ntdll!RtlStringVPrintfWorkerA+0x20
    0x0000000013eadc18 : 0x0000000013eadc60 : !da ""..=======================================.VERIFIER STOP 0000000000000303: pid 0x...""
    0x0000000013eadc38 : 0x000007fd9a41ad81 : ntdll!vDbgPrintExWithPrefixInternal+0x89
    0x0000000013eadc60 : 0x3d3d3d3d3d3d0a0a : !da ""..=======================================.VERIFIER STOP 0000000000000303: pid 0x...""
    0x0000000013eadc68 : 0x3d3d3d3d3d3d3d3d : !da ""=================================.VERIFIER STOP 0000000000000303: pid 0x1D0: NUL...""
    0x0000000013eadc70 : 0x3d3d3d3d3d3d3d3d : !da ""=========================.VERIFIER STOP 0000000000000303: pid 0x1D0: NULL handle...""
    0x0000000013eadc78 : 0x3d3d3d3d3d3d3d3d : !da ""=================.VERIFIER STOP 0000000000000303: pid 0x1D0: NULL handle passed ...""
    0x0000000013eadc80 : 0x3d3d3d3d3d3d3d3d : !da ""=========.VERIFIER STOP 0000000000000303: pid 0x1D0: NULL handle passed as param...""
    0x0000000013eadc88 : 0x4946495245560a3d : !da ""=.VERIFIER STOP 0000000000000303: pid 0x1D0: NULL handle passed as parameter. A ...""
    0x0000000013eadc90 : 0x20504f5453205245 : !da ""ER STOP 0000000000000303: pid 0x1D0: NULL handle passed as parameter. A valid ha...""
    0x0000000013eadc98 : 0x3030303030303030 : !da ""0000000000000303: pid 0x1D0: NULL handle passed as parameter. A valid handle mus...""
    0x0000000013eadca0 : 0x3330333030303030 : !da ""00000303: pid 0x1D0: NULL handle passed as parameter. A valid handle must be use...""
    0x0000000013eadca8 : 0x783020646970203a : !da "": pid 0x1D0: NULL handle passed as parameter. A valid handle must be used. ...00...""
    0x0000000013eadcb0 : 0x4c554e203a304431 : !da ""1D0: NULL handle passed as parameter. A valid handle must be used. ...0000000000...""
    0x0000000013eadcb8 : 0x656c646e6168204c : !da ""L handle passed as parameter. A valid handle must be used. ...0000000000000000 :...""
    0x0000000013eadcc0 : 0x2064657373617020 : !da "" passed as parameter. A valid handle must be used. ...0000000000000000 : Not use...""
    0x0000000013eadcc8 : 0x6d61726170207361 : !da ""as parameter. A valid handle must be used. ...0000000000000000 : Not used...0000...""
    0x0000000013eadcd0 : 0x2041202e72657465 : !da ""eter. A valid handle must be used. ...0000000000000000 : Not used...000000000000...""
    0x0000000013eadcd8 : 0x61682064696c6176 : !da ""valid handle must be used. ...0000000000000000 : Not used...0000000000000000 : N...""
    0x0000000013eadce0 : 0x73756d20656c646e : !da ""ndle must be used. ...0000000000000000 : Not used...0000000000000000 : Not used....""
    0x0000000013eadce8 : 0x6573752065622074 : !da ""t be used. ...0000000000000000 : Not used...0000000000000000 : Not used...000000...""
    0x0000000013eadcf0 : 0x3030090a0a202e64 : !da ""d. ...0000000000000000 : Not used...0000000000000000 : Not used...00000000000000...""
    0x0000000013eadcf8 : 0x3030303030303030 : !da ""00000000000000 : Not used...0000000000000000 : Not used...0000000000000000 : Not...""
    0x0000000013eadd00 : 0x3a20303030303030 : !da ""000000 : Not used...0000000000000000 : Not used...0000000000000000 : Not used......""
    0x0000000013eadd08 : 0x65737520746f4e20 : !da "" Not used...0000000000000000 : Not used...0000000000000000 : Not used...00000000...""
    0x0000000013eadd10 : 0x30303030090a2e64 : !da ""d...0000000000000000 : Not used...0000000000000000 : Not used...0000000000000000...""
    0x0000000013eadd18 : 0x3030303030303030 : !da ""000000000000 : Not used...0000000000000000 : Not used...0000000000000000 : Not u...""
    0x0000000013eadd20 : 0x4e203a2030303030 : !da ""0000 : Not used...0000000000000000 : Not used...0000000000000000 : Not used....=...""
    0x0000000013eadd28 : 0x2e6465737520746f : !da ""ot used...0000000000000000 : Not used...0000000000000000 : Not used....=""
    0x0000000013eadd30 : 0x303030303030090a : !da ""..0000000000000000 : Not used...0000000000000000 : Not used....=""
    0x0000000013eadd38 : 0x3030303030303030 : !da ""0000000000 : Not used...0000000000000000 : Not used....=""
    0x0000000013eadd40 : 0x746f4e203a203030 : !da ""00 : Not used...0000000000000000 : Not used....=""
    0x0000000013eadd48 : 0x090a2e6465737520 : !da "" used...0000000000000000 : Not used....=""
    0x0000000013eadd50 : 0x3030303030303030 : !da ""0000000000000000 : Not used....=""
    0x0000000013eadd58 : 0x3030303030303030 : !da ""00000000 : Not used....=""
    0x0000000013eadd60 : 0x7520746f4e203a20 : !da "" : Not used....=""
    0x0000000013eadd68 : 0x3d0a0a0a2e646573 : !da "sed....="
    0x0000000013eadda8 : 0x6e6f632073692070 : !da ""p is con""
    0x0000000013eaddc0 : 0x000007fd8551a7fc : verifier!VerifierStopMessageEx+0x6d0
    0x0000000013eade48 : 0x6573752074692067 : !da ""g it use""
    0x0000000013eade50 : 0x000007fd8551a7fc : verifier!VerifierStopMessageEx+0x6d0
    0x0000000013eade68 : 0x0000000013eadfd0 : 0x000007fd8554efe8 : verifier!VfProviderHandlesBreakDescriptors+0x198
    0x0000000013eadec8 : 0x0000000013eadc60 : !da ""..=======================================.VERIFIER STOP 0000000000000303: pid 0x...""
    0x0000000013eaded8 : 0x000007fd9a44e57f : ntdll!vsnprintf_l+0x75
    0x0000000013eadf08 : 0x000007fd8553a940 : verifier!VfProviderHandlesLayerDescriptor
    0x0000000013eadf10 : 0x000007fd8555568d : verifier!VrfDbgOutputBuffer+0x1ad
    0x0000000013eadf20 : 0x000007fd855554e0 : verifier!VrfDbgOutputBuffer
    0x0000000013eadf30 : 0x000007fd8554fb78 : verifier!AVrfpLogEntryMessageEx+0x258
    0x0000000013eadf48 : 0x000007fd9a44e511 : ntdll!vsnprintf+0x11
    0x0000000013eadf78 : 0x000007fd8554efe8 : verifier!VfProviderHandlesBreakDescriptors+0x198
    0x0000000013eadf88 : 0x000007fd9a4407a4 : ntdll!DbgPrintEx+0x30
    0x0000000013eadf90 : 0x000007fd8554efe8 : verifier!VfProviderHandlesBreakDescriptors+0x198
    0x0000000013eadfb0 : 0x0000000013eadfe8 : 0x000007fd855554e0 : verifier!VrfDbgOutputBuffer
    0x0000000013eadfc0 : 0x000007fd8554efe8 : verifier!VfProviderHandlesBreakDescriptors+0x198
    0x0000000013eadfc8 : 0x000007fd8551a7e7 : verifier!VerifierStopMessageEx+0x6bb
    0x0000000013eadfd0 : 0x000007fd8554efe8 : verifier!VfProviderHandlesBreakDescriptors+0x198
    0x0000000013eadfe8 : 0x000007fd855554e0 : verifier!VrfDbgOutputBuffer
    0x0000000013eadff8 : 0x0000000004153df0 : !du ""NULL handle passed as parameter. A valid handle must be used.""
    0x0000000013eae008 : 0x0000000004153ee0 : !du ""Not used.""
    0x0000000013eae018 : 0x0000000004153f70 : !du ""Not used.""
    0x0000000013eae028 : 0x0000000004154010 : !du ""Not used.""
    0x0000000013eae038 : 0x00000000041540a0 : !du ""Not used.""
    0x0000000013eae040 : 0x000007fd8554fb78 : verifier!AVrfpLogEntryMessageEx+0x258
    0x0000000013eae048 : 0x0000000004183820 : !du ""This verifier stop is continuable..After debugging it use `go' to continue..""
    0x0000000013eae098 : 0x0000000004183820 : !du ""This verifier stop is continuable..After debugging it use `go' to continue..""
    0x0000000013eae0a0 : 0x000007fd8555568d : verifier!VrfDbgOutputBuffer+0x1ad
    0x0000000013eae0b8 : 0x000007fd8554fb78 : verifier!AVrfpLogEntryMessageEx+0x258
    0x0000000013eae100 : 0x000007fd8553205c : verifier!AVrfpHeapFree+0xf4
    0x0000000013eae118 : 0x000007fd85515f90 : verifier!AVrfSetHeapPathCaller+0xc
    0x0000000013eae138 : 0x000007fd9a4054c0 : ntdll!RtlFreeHeap
    0x0000000013eae148 : 0x000007fd855305fc : verifier!AVrfpLeaveHeapCall+0x14
    0x0000000013eae150 : 0x000007fd994e1330 : kernel32!HeapFreeStub
    0x0000000013eae168 : 0x000007fd9a4eddee : ntdll!RtlpValidateHeap+0x32
    0x0000000013eae1a8 : 0x000007fd855261fc : verifier!AVrfpIncrementOwnedCriticalSections+0x30
    0x0000000013eae1b8 : 0x000007fd85525394 : verifier!AVrfpVerifyInitializedCriticalSection+0xfc
    0x0000000013eae1f8 : 0x000007fd9a4ef051 : ntdll!RtlDebugSizeHeap+0x119
    0x0000000013eae228 : 0x000007fd8552c6e6 : verifier!AVrfpSRWLockFreeMemoryChecks+0x16a
    0x0000000013eae280 : 0x0000000013eae298 : 0x000007fd8551873d : verifier!AVrfDebugPageHeapSize+0x89
    0x0000000013eae298 : 0x000007fd8551873d : verifier!AVrfDebugPageHeapSize+0x89
    0x0000000013eae2a8 : 0x0000000002048ba8 : 0x000007fd985405f4 : shell32!CUserFilesDescriptionEnum::Next+0x3c
    0x0000000013eae2c8 : 0x000007fd9a43e915 : ntdll!RtlWalkFrameChain+0x29
    0x0000000013eae2f8 : 0x000007fd9a43e8a8 : ntdll!RtlCaptureStackBackTrace+0x44
    0x0000000013eae340 : 0x000007fd9a402cc0 : ntdll!NtSetEvent
    0x0000000013eae348 : 0x000007fd855339ce : verifier!AVrfpHandleSanityChecks+0x3a
    0x0000000013eae350 : 0x000007fd9a4054c0 : ntdll!RtlFreeHeap
    0x0000000013eae398 : 0x000007fd85533d58 : verifier!AVrfpNtSetEvent+0x34
    0x0000000013eae3b0 : 0x000007fd99d41172 : combase!CoTaskMemFree+0x36
    *** ERROR: Symbol file could not be found. Defaulted to export symbols for ShellStreams64.dll -
    0x0000000013eae3c8 : 0x000007fd9749152c : KERNELBASE!SetEvent+0xc
    0x0000000013eae3e8 : 0x000007fd9a4054c0 : ntdll!RtlFreeHeap
    0x0000000013eae3f8 : 0x0000000180013241 : ShellStreams64!DllCanUnloadNow+0x541
    Loaded symbol image file: ShellStreams64.dll
    Image path: C:\Program Files\Common Files\Apple\Internet Services\ShellStreams64.dll
    Image name: ShellStreams64.dll
    Browse all global symbols functions data
    Timestamp: Tue Dec 18 01:38:54 2012
    "A programmer is just a tool which converts caffeine into code"

  • Flash crashing every few minutes

    I'm working on Flash MX 2004 Pro. and every few minutes the
    program crashs, most of the time after
    publishing SWF movie.
    You can see the error popup here:
    Error popup
    Help!

    Thank you for your comments.
    It takes three hands to hold ctl-alt-del on my keyboard while clicking to start Flash.  Worse, no matter how I tried, there was no response from Flash. The system would always start the task manager. No dialog box appeared at any time during multiple attempts.
    The CC cleaner would do nothing if I uninstalled the Adobe programs before running it, as directed.  Even after restoring the CS6 bundle and running CC Cleaner, and then re-installing as the CC Cleaner directs left conflicts that caused Flash to continue to crash
    I finally gave up and performed the only technique that has reliably worked since IBM in 1981 made the error of involving Bill Gates and the resulting Microsoft excuses for an operating system.  I wiped my drive; reinstalled Windows 7 and all my other programs.  This half-day process has solved the problem for now.  Of course it is only a matter of time before windows accumulates another load of crap and my programs again begin to crash.
    If my College of Business had not standardized on Microsoft products, I would happily be banging away on my Mac.

  • WRT400n reboots every few minutes

    HI,  I have this router and was working great......  THEN I get this great idea,  oh yeh, check to see if there is a firmware upgrade and there is.  Well I updated it with the newest and only one out there.   I did the upgrade, said sucessful and now it will just random reboot or something........ every few minutes the power light starts flashing....... then all the light go out, then power flashes again and it comes back up.   I have tried many times to reflash it with that new firmware but no avail.  I wish I had the old firmware back because it was working fine till I did this upgrade.   Anyone or Cisco persons have a solution for me,  can I get a copy of the original firmware or what is going on.    I am about ready to switch brands.... I've been a loyal Linksys/Cisco guy for long time but this and couple other routers I worked on are getting me to wonder.  Please help.......... thanks.

    Yeh I have done a hard reset numerous times....  I have re-flashed it 3 times.   I just did flashed it again, and did a hard reset and setup my router settings the way I want it.  I will see what happens overnight and repost my solutions.  My guess is it will start acting up again...... I've tried everything.    Does anyone know where I can get the original flash file for the WRT400n,  it was working fine till I tried to update with the latest one.....  should have left it alone.  If I can't fix it....... I am switching brands.

  • ColdFusion 6.1 restart every few minutes

    Hi,
    I am running ColdFusion MX 6.1, Win 2003, JVM 1.4.2-b28.
    The issue is every few minutes the ColdFusion is restarting automatically when checked in the application events. The error description says : The coldfusion mx application server service killed process with pid. After this CF restarts.
    The event ID is 263.
    Any help  / suggestion is greatly appreciated.
    Thank you.

    Yes, I know it very well we have CF 10 now but I have to use CF 6.1 for now. If I check runtime logs it shows the below error :
    Even there are other errors but the below error seems to be repeated many times.
    java.lang.ClassCastException: isIISJrunVirtualDir
        at coldfusion.scheduling.PriorityComparator.compare(Scheduler.java:20)
        at org.apache.commons.collections.BinaryHeap.compare(Unknown Source)
        at org.apache.commons.collections.BinaryHeap.percolateUpMinHeap(Unknown Source)
        at org.apache.commons.collections.BinaryHeap.insert(Unknown Source)
        at coldfusion.scheduling.Scheduler.insert(Scheduler.java:109)
        at coldfusion.scheduling.Scheduler.schedule(Scheduler.java:195)
        at coldfusion.mail.MailSpooler.run(MailSpooler.java:924)
        at coldfusion.scheduling.ThreadPool.run(ThreadPool.java:201)
        at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:70)
    java.lang.ClassCastException: isIISJrunVirtualDir
        at coldfusion.scheduling.Scheduler.createRunnable(Scheduler.java:128)
        at coldfusion.scheduling.ThreadPool.createRunnable(ThreadPool.java:128)
        at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:67)
    java.lang.ClassCastException: isIISJrunVirtualDir
        at coldfusion.scheduling.Scheduler.createRunnable(Scheduler.java:128)
        at coldfusion.scheduling.ThreadPool.createRunnable(ThreadPool.java:128)
        at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:67)
    Thank you so much.

  • Mac "hiccup" - short freezes every few minutes

    I have 15" Intel MBP running OSX 10.6.3. Evey 15-20 minutes the system freezes or "hiccups" for 1 second. This is noticeable when I am streaming video from a USB drive connected to my Time Capsule, watching video from the hard drive or online, or playing a game such as Torchlight. I've run disk utility and Onyx and the system checks out fine. It's a minor annoyance, but any idea what could be causing it?

    The fact it affects both operating systems suggests a hardware issue.
    Run the hardware that came with your computer:
    http://docs.info.apple.com/article.html?artnum=303081
    If nothing is detected, it may mean your RAM is faulty*:
    http://www.macmaps.com/badram.html
    - * Links to my pages may give me compensation.

  • The system ask for keychain password every few minutes

    hi, if somebody can help me, please. The system ask me for a keychain password every few minutes, what i need to do?

    Hello Mduque45
    Try repairing or resetting your Keychain by following the steps in the article below to resolve the issue with the repeated prompts to enter in the password.
    Resetting your keychain in Mac OS X
    http://support.apple.com/kb/ts1544
    Regards,
    -Norm G.

  • How do I stop the update banner from annoying me every few minutes?

    How do I stop the Updates Available banner from annoying me every few minutes? I have tried to deselect the "Automatically check for updates" box in System Preferences==>Software Update, but it doesn't help.

    I prefer to manually check for updates when convenient and install only those that I wish to install at a time of my choosing. Surely Apple wouldn't be so heavy-handed as to make this impossible?

  • I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

    I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

    Is there an email saved in your drafts or outbox folder?  I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
    You can open the message and then delete it from your Outbox folder.  Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks.  I suspect that will work.
    With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages.  If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

  • I use apple TV to watch Netflix.  How can I stream the movie, so it doesn't stop every few minutes?

    Why does the Netflix not streaming all at once, instead of every few minutes, interrupting the movie.

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Maybe you are looking for