Satellite A60-124 - How can I extract BIOS or reset?

Hello
I search the solution to extract the BIOS on Satellite A60 (PSA60E 09T060FR) or procedure to reset the chip.
Here is the model "software inside bios-m JE 2238
Thank you very much

Hi!
I dont know what you mean with extract the BIOS but BIOS reset can only be done from an ASP. The ASP is able to reflash the ROM module if its possible and reset the BIOS.
I think the best way is you contact an ASP. They can help you because here its only a user to user forum.
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
Bye

Similar Messages

How can I extract certain pages from my document and save as another file?

How can I extract certain pages from my document and save as another file?

You would need Adobe Acrobat to do that, not Adobe Reader.

How can I extract only the audio as an aiff file?

Using a Sony DSC-N2 Cybershot Camera I recorded video that was saved as “MOV01606.MPG”. The video plays back with sound in Quicktime Pro and iTunes but how can I extract only the audio as an aiff file?

Use MPEG Streamclip (free) to convert your .mpg files to QuickTime formats.
QuickTime can't extract audio from muxed file formats.

How can i extract just documents from time machine backup?

How can I extract just my documents from a time machine backup? I had to re-install Lion after the update screwed things up, the Genius Bar guy told me to re-install each App, and then transfer just my data (documents) back but didn't tell me how. I only see how you can restore the entire snapshot of what was on my MacBook that day, I don't see how to select specifics.

Hi,
Install a fresh Lion OS on your Mac. After this is done, then connect your time capsule. Click on the time machine icon in the dock bar so you will enter in time machine. Select the document folder and any document or all you need. The same thing you can do with iPhoto, Emails, etc.
Let me know
Claudio

How can I extract a bent CD from an Apple Superdrive?

A bent CD has jammed in my Apple Superdrive. How can I extract it?

Here's a list of generally accepted approaches:
http://www.macyourself.com/2009/05/01/the-ultimate-guide-to-ejecting-a-stuck-dis c-from-mac-superdrive/
Depending on the Mac model you have, there may be other approaches, and there is always the Final Solution of cracking the case, pulling out the superdrive, and mucking with it directly. But don't go there unless you have to and/or are feeling a bit crazy.

How can I extract the two channels from a stereo track?

Hi,
I am writing a class that is able to draw an audio signal. It seems to be working well but I have a question. If I load a mono audio file I am able to draw it on a graph by using the byte[] array and everything is ok until now. That's the code:
void Draw(byte[] x)
            Graphics g=getGraphics();
            Graphics2D g2=(Graphics2D)g;
            g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,                     RenderingHints.VALUE_ANTIALIAS_ON);
            for(int i=0; i<x.length-6; i++)
                g2.draw(new Line2D.Float(((i*(getWidth()-6))/x.length)+5, (getHeight()/2)-          ((x*(getWidth()-6))/x.length), (((i+1)*(getWidth()-6))/x.length)+5, (getHeight()/2)-     ((x[i+1]*(getWidth()-6))/x.length)));
The results is correct only if I have a mono track. Obviously when I get a stereo track the array becomes very large so here the question. How can I extract the two audio channels from a stereo track?
Thanks in advance.
Maurizio Di Vitto

A mono audio stream is stored [sample, sample, sample, sample], so just a list of samples in an array.
A stereo sample is interleaved in the same manner, so you get [left-sample, right-sample, left-sample, right-sample]
So every nth sample is the 1st channel, every nth+1 is the 2nd channel...

How can I extract all attachments together in office365 email?

How can I extract all attachments together in office365 email?

There is no build-in feature in Outlook 2013. However, we can accomplish that via coding VBA.
Here is a simple I may provide:
http://stackoverflow.com/questions/15531093/outlook-vba-macro-to-save-attachments-to-a-folder-and-rename-them
Programming/Code related questions should really be posed in one of the following forums:
Outlook for Developers
http://social.msdn.microsoft.com/Forums/en-US/outlookdev
Microsoft Office Programming
http://answers.microsoft.com/en-us/office/forum/customize?page=1&tab=all&tm=1361680524815
Tony Chen
TechNet Community Support

How can I extract the data from Xstring .

Hi Gurus ,
How can I extract the data from a XSTRING .
I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
Someone told me that there is a standard FM for that . but I am not able to find .
Please reply with the FM in case some one knows about it .
Thanks in advance .

The following code works as of 7.0 (in any SAP system):
FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
TYPES : BEGIN OF ty_struc,
          line TYPE c LENGTH 100,
        END OF ty_struc.
DATA lt_char TYPE TABLE OF ty_struc.
DATA length TYPE i.
length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    buffer                = input
tables
    binary_tab            = lt_char.
CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
output = output(length).
ENDFORM.
Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM

How can I extract the results of my squence?

Hello, I'm a beginer of test Stand.
I've created a main squence with LabView & TestStand, and works well, when it finish TestStand automatically creates my report. I need to extract these results of my sequence in order to create a custom document automatically, creating an action with LabView that works with these results, without any action of an operator.
How can I extract these results? Thanks you very much.

Hello,
you've got several options here, although it seems you might want to go with the first option:
1) After running your sequence, you'll find all the results needed for creating a report on the variable Locals.ResultList, which is an array of objects (of the Result type). You can pass this array to external code for it to use the information (i.e. create a report)
2) You can override the report generation callback on your process model (Test Report callback)and create your own LabVIEW-based report generation sequence/routine
3) You can modify the report generation sequences on the process model to suit your needs (always make backup copies and place your modifications on the /Components/User folder !)
I would also recommend you to assist National Instruments Training Courses, as these things can be seen in detail and provide you a better understanding of all the options TestStand has.
Regards,
Jorge M.Mensaje editado por Jorge M.

How can I extract part of a PDF file and copy it to a new PDF file?

How can I extract part of a PDF file and copy it to another PDF file?

You will need Adobe Acrobat for this.

How can I extract a page from a document if I don't have that option on my tools menu?

How can I extract a page from a document if I don't have that option on my tools menu?

iPhoto on the iPad can be used to make photo books, but not calendars. It is a very different program from the Mac version of iPhoto. I hope you have access to a mac to create your christmas calendar.
http://help.apple.com/iphoto/ipad/2.0/?handbuch#blnkbc26e276
Search the AppStore for "Foto Calendar". I have not tried any of these apps, but there are quite a few, that claim to be able to create an "Awesome foto calendar"

How can I extract single pages from pdf document

how can I extract a single page from pdf document

Purchase and install Acrobat XI.
Open a multi-page PDF.
Use the click path of:
Tools - Pages - Under "Manipulate Pages": Extract
Be well...

How can I extract non-cumulative cube data to another cubes ?

Dear Expert,
         I copied inventory cube 0ic_c03 to a new cube : ZIC_C03 , then I loaded the data of 0ic_c03 to the new cube ZIC_C03 .
the loading was sucessful, but the result of report of the ZIC_C03 was not correct. After looking into the problem, I found out
the new cube can successfully extract data related with "Goods movement" & "Revaluation", yet the extract of "Open Balance" does not seems to work.
         I have read through Note:375098, in which I could not find (InfoObject 0RECORDTP) in my start routine as mentioned in the solution
,and the note was not mentioned valid for BW 3.5 release.
         How can I extract non-cumulative cube data to another cubes correctly in BW3.5 release SP20?
   Thanks !

Hi,
Check Routines in Update rules wether same code is wrriten in new cube
cheers,
Satya

BootCamp driver won´t work on my MacBook. How can I extract it from DVD?

Hi folks.
I´m new on BootCamp.
After installing Windows XP SPII, witch works fine for me, I tryed to install the BootCam drivers.
But: The Leopard DVD won´t start - like in the manual How can I extract the Drivers from the
Leopard DVD to copy them to the BootCam partition to install them manually?
Thank you al lot!

It is a known problem on Microsoft's end.
From their site:
"SYMPTOMS
Microsoft Windows XP Service Pack 2 (SP2) cannot read DVD-RW disks that use the Universal Disk Format (UDF) 2.00 defect management system. When you view the DVD contents by using Windows Explorer, you see an empty... ...A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next service pack that contains this hotfix.
To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:
http://go.microsoft.com/?linkid=6294451"
I posted this in reply to another thread:
"It is a known Microsoft issue with UDF in some SP2 versions, and there is a hotfix for it.
search for this in Google:
"DVD-RW disks appear to be empty" hotfix
You can do it 3 ways:
1) If you run the Xp updater (which may take hours) and follow all the instructions, reboot and run the updater again... and again until all the updates are there, then you will get the fix.
2) Find , download and install just the hotfix... it may take some looking...
3) contact Microsoft from their site and get the hotfix from them. "

How can I extract a km-iView out the portal to redefine it?

Hello folks,
I want to redefine the com.sap.km.cm.navigation-iView to serve generic access to the users home drive by using the <User.UserID>-variable. Therefore I have to extract/download the iView out of the Portal. I wasn't able to find KM-Content in Systemadministration->Support->Portal Runtime->Browse Deployment. What do I have to do?
How can I extract a km-iView out the portal to redefine it?
Regards
Steffen

Just as an example:
package com.btexx.proxy;
import com.sapportals.portal.prt.component.*;
import com.sapportals.portal.prt.pom.IEvent;
import com.sapportals.wcm.repository.ResourceException;
import com.sapportals.wcm.repository.ResourceFactory;
import com.sapportals.wcm.service.IServiceTypesConst;
import com.sapportals.wcm.service.urlgenerator.IURLGenerator;
public class Example extends AbstractPortalComponent
     protected void doOnNodeReady(IPortalComponentRequest request, IEvent event){
          String uname = request.getUser().getLogonUid();
          String path = "/userhome/"+uname;
          String rndLayoutSet = "ConsumerExplorer";
          String explorerServletPath = "/irj/servlet/prt/portal/prtroot/com.sap.km.cm.navigation";
               try {
                    IURLGenerator ug = (IURLGenerator) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
                    explorerServletPath = ug.getExplorerServletPath();
               } catch (ResourceException e) {
          request.redirect(explorerServletPath+path+"?rndLayoutSet="+rndLayoutSet);
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
+ portalapp.xml
<?xml version="1.0" encoding="UTF-8"?>
<application>
<application-config>
    <property name="SharingReference" value="usermanagement, knowledgemanagement"/>
</application-config>
     <components>
          <component name="Example">
     <component-config>
          <property name="ClassName" value="com.btexx.proxy.Example"/>
          </component-config>
               <component-profile>
                    <property name="com.sap.portal.reserved.iview.Redirect" value= "true"/>
               </component-profile>
          </component>
     </components>
<services/>
</application>
all the best,
dimitry

Satellite A60-124 - How can I extract BIOS or reset?

Similar Messages

Maybe you are looking for