Satellite L305D-S5892 - Frame rate is low and YouTube videos get stuck

Well here is the deal I had some problems with my Satellite l305d-s5892 so I ended up using a Windows Vista copy to format it so I can use it again.
But I play world of warcraft and the frame rate is much lower now so im guessing that there are some configurations or something missing. I mean I can get the drivers and all from the website and I got the video drivers installed. Ik I dont kwnnowo if there are some other relevants drivers I have to put or something and some thng else you tube videos get momentary stuck every now and then but the sound keeps going and then the videos just catch up whit the sound.
If some one can help me or knows a beginers guide so I can properly configure my lap top I would realy aprciate ir thanks

Hello
As Akuma said can you notice yellow exclamation marks in device manager?
Its also important that you install the chipset driver and all other drives and not only the display driver. All what you need you can find on the Toshiba website.
Check this!!!
Furthermore make sure that you have all Windows updates installed.
Alternative you can use the Toshiba recovery disk. It contains already all drivers for your system and you can get back factory settings in few minutes. :)
Greets

Similar Messages

  • Best bitrate/frame rate for 1080 and 720 HD?

    What seems to be the best bit rate and frame rate to use for
    HD video for best playback on a Mac Mini. Plan on using H.264 encoder
    to be compatible with iTunes,etc. (I like iTunes for consolidating all my media).
    I have downloaded several movies from iTunes, both HD and SD, and they all
    look great and playback smoothly.
    I will be using a 32" Samsung HDTV.

    FWIW, I've been working on a 720p project and have found the "proxy" on the cinema display pretty good for judging focus. We thought we found some material with soft focus and actually took it to a post house to look at the tape on a CRT. It was out of focus.
    If I remember correctly, I think Decklink made an adapter that would allow you to view HD material on the cinemadisplay. Maybe someone else can pipe up with the specifics. Someone else also recently posted this link: http://www.matrox.com/video/products/mxo/home.cfm.

  • I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play.  Has anybody had this happen?  And if so is there any solution?

    I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play.  Has anybody had this happen?  And if so is there any solution?

    Hey Christian,
    I'd follow the troubleshooting steps below, from this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    See if that resolves the issue and gets your video playing again.
    All the best,
    David

  • I was editing photos and it was getting stuck or frozen and working really slow, so I attempting to close aperture and reopen it but it won't quit aperture and now it won't open up to my photos either.  Any ideas?

    I was editing photos and it was getting stuck or frozen and working very slowly.  I attempted to restart the computer but it would not allow me to quit aperture.  Now aperture appears in my toolbar but will not open up so I can work on any photos.  Any ideas?

    Did you try opening from the Applications folder?
    Depending on how far that gets you, I would also take a look at the Troubleshooting Basics.

  • Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.

    Downloaded a movie from iTunes to my iPad. 2 minutes into the movie it stopped and My Videos is stuck in black screen mode. So basically rented a movie and never watched it.

    The EXACT same thing happened to me last night!  Rented a movie; it had barely started and then froze.  When I touch the video app icon, all I get is a blank, dimly lit screen.  None of the other videos I own will display either.  Was your problem ever resolved?

  • After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...

    After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
    And I need to reboot everything from the power button...
    It's just the second time it happens. What it depends from?    

    Hello DarlinDodson,
    I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Allen

  • The select function in Pages and other apps gets stuck and the cursor will not move. What do I do?

    The select function in Pages and other apps gets stuck when I touch a word and the cursor will not move. What is the answer for this problem?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

    I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

    Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
    Have you thought about turning auto syncing off?
    Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
    This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
    BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

  • How can I get webpages and YouTube videos to load faster?

    Webpages and YouTube videos load painfully slow and sometimes not at all on my iPad. I rarely have more than one signal bar lit. It hasn't always been this way. Nothing has changed with my wireless service. I tried clearing my history but that didn't help. Any ideas? Thanks!

    Close other apps that are running.  Double click the home button, and (assuming you're running iOS 7) swipe up toward the top of the screen the images that appear over the app icons you see to close those apps.
    Also close extra Safari tabs you may have open.

  • Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?

    Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?
    Worked fine last night. It's running Snow Leopard.

    Does your iMac fail to boot every time or only some of the time?  Here are some things to try:
    - Boot into "safe mode", which will run the equivalent of Disk Utility's "repair disk" operation.
    - Boot from the system install disc that came with that Mac with the "D" key held down to run the diagnostics.  Run them several times to see if any hardware problems are reported.
    - If you can't identify the problem or fix it any other way, download and install the OS X 10.6.7 "combo" updater.
    - If that still doesn't help, try reinstalling OS X 10.6 over the top of what's on the disk.

  • Have a Droid Razr M that is stuck in the reboot screen. I tried a hard reboot and a factory reset, and it still gets stuck in the reboot screen. How long should I wait for the reboot to occur until it starts back up?

    Have a Droid Razr M that is stuck in the reboot screen. I tried a hard reboot and a factory reset, and it still gets stuck in the reboot screen. How long should I wait for the reboot to occur until it starts back up? I tried the steps for a factory reset given on this site, but it still does not want to work. Any help would be greatly appreciated.

        Hello otter314!
    Let's take a look into this to see if we can figure out what happened. When did this begin? What's the software version of the device? Do you remember what was happening with the device right before this started? Please supply me with some additional information, I'm happy to help with a resolution!
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • Satellite P70-A01C Frame Rate in World of Warcraft is LOW

    Bought this laptop a couple of months back as a gaming machine.
    Was told it would run most current games with few dramas but I am having issues with World of Warcraft. Even with a quad core processor, 16GB RAM and a 4GB graphics card I sometimes get 9-12fps.
    This is usually when there is a lot going on, like in a raid but, even so, with these specs this computer should be able to handle it. Normally I get around 80-90fps, and I get similar on my desktop PC (quad core, 8GB RAM, 2GB graphics).
    Any suggestions as to how I might fix this?
    I've always got the latest NVIDIA drivers installed and keep everything else up-to-date as well.
    I'm wondering if I've missed something?!?!?
    Thanks.

    The notebook specs page provides info about the hardware built-in the notebook.
    http://www.mytoshiba.com.au/products/computers/satellite/p70/psplpa-01c002/specifications
    _It sys:_
    +*Graphics* nVIDIA GeForce GT 745M 4GB With Optimus and Intel HD Graphics 4600+
    The nVidia Optimus technology switches between the external, graphic chip (nVidia) and internal graphic including in CPU (Intel HD Graphics 4600) in order to save the power.
    In my opinion the low frame rate could be related to the graphic chip which is used by this game. Maybe the game uses the Intel HD graphics instead of nVidia GPU?
    If you want to know how to switch between nVidia and Intel, check this short youtube clip:
    https://www.youtube.com/watch?v=Zh4HCadTY_A

  • A question about Frame Rate in FCPX and Motion 5

    I use a Canon Legria HV40 shooting at a frame rate of 25fps
    Is it essential to set the frame rate in Final Cut Pro X and Motion 5 to 25fps as well?
    The reason I'm asking this is that I recently put together a series of clips shot with the HV40 in a FCPX project with the default settings of 60fps and it didn't seem to matter - everything worked as expected..

    FCPX automatically 'confirms' any clip rate to the Projects settings.
    But ... more rendering to do (=time), 'un-eveness' could lead to blur/quality loss (=how do you divide 25 frames over 60 equally?) ...
    Best practice is: cam, project, delivery = same frame-rate.
    Exception: for nice slow-mo: HFR on cam, low fps on Project ....

  • Ichat Frame Rate issues, low FPS

    Hi,
    My Father has a G5 1.8 iMac (20") w/ iSight and Tiger, connected to the internet via a cable modem. His upload and download speed are great. When he connects to me in iChat (or anyone else) he initially hooks up at about 15 fps+, but within 5-7 sec, drops to 1 fps, and stays there. He has been unable to get greater than 1 fps sending his video, which results in quite choppy video for anyone on the receiving end.
    Any ideas on how he can get his frame rate to increase? I've run out of ideas.
    Thanks,
    Tyler

    Hi Tyler
    What apps are running in the background, eg:Virex for one can take the frame rate down and is not compatible with 10.4 so uninstall it.
    Also some widget's can cause frame rate loss so turn them all off to check.
    Tony

  • FCPX Mixed Frame Rates? 30fps AND 24fps in same project?

    Just got done doing a multicam shoot for a large event where I had multiple people helping me out. We all shot at 1080p on a variety of Canon DSLR cameras and a Go Pro and a MiniDV Consumer Cam. I thought everyone got the memo to shoot at 30fps, and most everyone did, however one of my Canon cameras shot at 24fps. I know I've heard in the past mixing frame rates can cause issue in other programs, and I know FCPX can handle multiple frame rates, but what sort of trouble am I in for if I want to use footage from cameras using 30fps and a camera using 24fps in the same final product? Is the 24fps stuff going to choppy or weird if I use it in a 30fps sequence/project? My final deliverable at this point can be 30fps or 24fps, it is not stated and I want to make sure evrything looks good so what should I set my project settings for? Any ideas?

    Ah - no - conforming simply resets the frame rate information. You should re-conform it back to 29.97...
    Here's what I think you'll need to do. If the majority of your material is at 23.98, make your main sequence that. Cut everything at that 23.98 - you'll have to render any 29.97 material then, but when you've locked picture, look at the sections with 29.97 stuff and if it looks okay, just skip to making the DVD. If it doesn't, you'll have to insert a pulldown by exporting your sequence then bringing the quicktime back in, adding a pulldown with Shake ($500) or Nattress frame rate converter ($99) - OR try this - edit it to tape and a pulldown will be inserted, then recapture.
    Once you have a 29.97 version of your clip, cut it into a 29.97 sequence and re-cut in the 29.97 material (now you won't need to render). Then export for your DVD.
    Now - after all this, are you sure that your 30fps material is NOT 29.97 with a pulldown? Did you check this yet?
    Patrick

Maybe you are looking for

  • Adobe Media Encoder - compression issues (.flv) cs6 vs earlier versions

    Hi all, I hope somebody can help. This morning I encoded from a 1080p QuickTime .mov file to a 360p .FLV file. I have previously used this work-flow with CS4 and CS5.5 and have had great results. When I attempted the same thing this morning, for the

  • Videos won't play in firefox but will in chrome

    Have found the solution to my problem, switched to google chrome end of problem.

  • Subquery, TO_NUMBER and ORA-01722 invalid number

    I'm running into a invalid number error (ORA-01722) when I expect none. I have a table that stores a semester term as a VARCHAR2, all term codes are actually numbers like 200609. There is one exception which I filter out, using a subquery, to prevent

  • How to create an Assets Library using C# in SharePoint 2010?

    currentWeb.Lists.Add( "List Name", "List Description", SPListTemplateType.AssetsLibrary); This code does not work for me in Visual Studio. The SPListTemplateType enumerator does not have an assets library item. How can I programmatically create an As

  • "Disk Full" error when disk is not full

    I am starting to receive repeated situations where the OS reports that my disk is full, and any or all disks are also reported full... I have emptied my trash, cleared all caches, deleted all logs, removed Apps I don't use (and their data in the Libr