Satellite P300 PSPCCE: I want to remove or chang splash screen on startup

I have Satellite P300 PSPCCE laptop and want to remove or change splash screen on begin of booting laptop.
Is there a way to do it? My Bios version is v3,40

this is how it looks my BIOS setup (no options like quite boot, fast boot, etc.)
Main
* System Time
* System Date
* CPU Type
* CPU Speed
* HDD1 model name
* HDD2 model name
* Optical Disc driver
* Power on display
* Total Memory
* System Bios version
* Language
Advanced
* Legacy USB Support
* Core Multri-Processing
* Execute-Disable bit Capability
* Intel(R) Virtualization Technology
* Built-in LAN
* Wake-up on keybord
* Wake-up on LAN/Wireless LAN
* Critical Battery Wake up
* Pointing devices
* Illumination LED
* USB Sleep and charge
* HDMI-CEC
* Remote power on/off
* SATA controler Mode
Security
* User password Is
* Supervisor password is
* Set user password
* Set supervisor password
* HDD1 password
* Set HDD1 User password
* HDD2 password
* Set HDD2 User password
Boot
* HDD1
* HDD2
* CD/DVD
* FDD
* LAN
Exit
* Exite saving changes
* Exit discarding changes
* Load setup defaults
* Discard changes
* Save changes
Which version of bios, are you having?

Similar Messages

  • Blackberry 9220, i want to remove the vendor boot screen, is it possible?

    As the title above, i wanna remove the vendor splash screen there. it shows Blackberry Original Smartphone without brand name, kinda annoying for me hehe

    Hello Mrazick,
    Thanks for your Post..!!
    Does vendor means the serivce provider, if yes then it would not be possible to change the vendor splash scree because you have a locked handheld.
    If you have unlocked handheld and you rae still having vendor splash screen, then you may try by installing OS in handheld using below articles.
    How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...

  • VAP for Win7 64bit affects WLan speed - Satellite P300 PSPCCE

    I managed to get windows 7 professional (64bit), windows update pretty much installed all the updates.
    Without any problems, but there are a few things that it cannot find.
    The hotkeys and mouse track pad drivers. I went onto the toshiba site, then downloaded and installed the value pack. All drivers worked fine, but I noticed the drivers provided by toshiba for the WiFi card has made it stick to 65mbps.
    I left it for a few hours and the speeds did not fluctuate at all, when i did a system restore and used the original drivers found by windows update my WiFi connection was ranging between 117 mbps and 150mbps.
    I dont want to use the toshiba value pack becuase it will ruin the wifi drivers, I tried updating the drivers but they wouldnt work.
    Is there any way to have the drivers for the hot key functions and mouse/trackpad seperately?
    I would like to use them, If not Toshiba admins can you split them from the value pack so I can install the 2 drivers.
    I forgot to mention: I have the Satellite P300 PSPCCE

    Hi
    > Is there any way to have the drivers for the hot key functions and mouse/trackpad seperately?
    I doubt this is possible. The VAP is a package which contains different tools and utilities and the whole package cannot be slivered.
    To be honest Im not quite sure why the VAP should slow down the Wlan.
    But Ive got a idea;
    The VAP contains the Toshiba power saver. It enables some options in Vista power management.
    For example there is an option Wireless Adapter Settings -> Power Saving Mode
    There are four power saving / performance settings. If your Wi-Fi connection is unstable or slow, try selecting a higher-performance setting.
    You can also go to device manager -> Wlan card properties and there you could find some tabs.
    In one tab called Advanced you could change the setting to get a higher speed.

  • Satellite P300 - I need the part number of the original screen

    Please can anyone help?
    I need to get Toshiba part number for the original screen in my Satellite P300-20H. My laptop fell of the bed and the only way I can use it is with an external display
    all else is fine with the laptop but it would be a great help if I could get the part number for the original 17" WXGA+ TruBrite.
    Please feel free to email any help you have: Email:[[email protected]]
    much thanks
    Welsh_Jam

    Hello
    I think nobody here can anwer your question: Its only a user to user forum and you will not find any notebook technicians here they can tell you the part number of the screen.
    If you want to know it you should contact an ASP. They can order all original Toshiba parts:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Find an authorized service provider
    Greets

  • Remove "open recent file" screen on startup Acrobat X

    When I start Adobe Acrobat X, it opens the splash screen "open a recent file". This is very annoying, because when you use Outlook, and choose to print a PDF document, it opens Acrobat X, it prints, but Acrobat X does not close from itself. I have to do it manually. So when I have to print several PDF documents from Outlook, I need to close every Acrobat X app, so the next document will print. Acrobat 9 did it automatically.
    Is there a solution, or a registry tweak, to remove the "open a recent file" screen?
    Kind regards

    Had a user call me today after installing an Adobe update:
    "Whenever my boss prints from Outlook now, his PDF's go into some Adobe "recent" queue...."
    Huh? I go to check it out. It's the same issue that people are complaining about here.
    I asked his secretary: "Did you get an update?".
    "No"
    She clicks on the Adobe X icon: Please wait while update is applied...
    Up pops this "new and improved" recent screen.
    Then I ask her to print a PDF attachment. Same issue as BravoBE.
    I can see this confusing A LOT of people. My secretary didn't realize she could still click the menu bar when this "recent" screen was up.
    Can you please give us an option to turn this off?
    And can anyone supply me with a link to get back to Reader 9?
    //edit//
    Found it for anyone else looking:
    http://get.adobe.com/reader/otherversions/
    //edit//
    Of course I (the IT Manager) have Acrobat 8 Pro so I will hopefully not have this issue.

  • Cool way to remove 'X' from Splash Screens

    I just found a way to remove the 'X' in the window for creating splash screens. Here is the code:
    // Make sure you have an image file (splash.jpg) in your dir.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.border.*;
    public class SplashScreen
    static JWindow window = new JWindow();
    private static void showWaitDialog(boolean show)
         JPanel panel = (JPanel)window.getContentPane();
         panel.setBorder(BorderFactory.createBevelBorder(BevelBorder.RAISED));
         if (show)
              JProgressBar progressBar = new JProgressBar(JProgressBar.HORIZONTAL);
              progressBar.setIndeterminate(true);
              panel.setLayout(new BorderLayout());     
         panel.add(new JLabel(new ImageIcon("splash.jpg")), BorderLayout.NORTH);
              panel.add(progressBar, BorderLayout.SOUTH);
              window.setLocation(300,300);
              window.pack();
              window.show();
         else
              window.hide();
    public static void main(String[] args)
         try
              showWaitDialog(true);
              Thread.sleep(10000);
              showWaitDialog(false);
         catch(Exception e)
              e.printStackTrace();
    I would love it if you let me know if this was helpful.

    Check the links below for options to remove the Adware.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

  • Remove the Platinum splash screen?

    Just did a succesfull flash of the latest BIOSon my K8N Neo2 Platinum.
    Now when I boot I get that ugly splash screen thing, I hate it.
    Is it possible to remove it?
    Thanks.

    Quote from: [T-A]_Super_10 on 20-April-05, 15:34:15
    Yes you can change the image on boot up. I forget the steps but i remember bosskiller was the one who posted it in this forum, you can try and do a search on it.
    Ty for interesting [T-A]_Super_10.
    I have find it "https://forum-en.msi.com/index.php?topic=73806.0",
    but i am not sure its right for all and for  my  MSI K8N Neo4 Platinum ?

  • Want to remove or change * on primary call in favorites

    Want to make different primary call number my default,
    how do I move */star. This is right after type of phone on favorites. Have 4S using OS 8.1.2

    With this, you can bypass the search bar altogether.
    '''[https://addons.mozilla.org/en-US/firefox/addon/context-search/ Context Search]''' {web link}
    Expands the context menu's 'Search for' item into a list of
    installed search engines, allowing you to choose the engine
    you want to use for each search.

  • Remove Premiere Elements Splash Screen?

    Is there a way to get rid of the annoying Splash Screen in Premiere Elements 7? If I close it, the entire application closes too.
    Rosy#55

    Thanks everyone for the quick replies.  I guess I'll just move on with it there.  I am building Packages to deploy out to the user's in our organization.  Our accepted way is to generally get rid of all splash screens.  But as long as I know there is nothing I can do I should be able to deflect the complaints that land at my desk.
    Thanks
    Rosy#55

  • Satellite P300 keeps restarting itself after initial start up screen.

    My Satellite P300 keeps restarting itself after the initial start up screen.
    The initial start up screen with the F2 & F12 options at the bottom appears, the screen then goes black, then a cursor appears in the top left hand corner and flashes a couple of times. Then the laptop shuts down and restarts itself and goes through the same process over and over.
    This is all with the power adaptor plugged in. If unplugged, it will go through the above mentioned process and shut itself down with no restart.
    Any help or advice would be much appreciated.
    Message was edited by: aic-poppy

    F8 is not listed in this meny, just F2 and F12 but F8 should help you to enter Advanced boot options .
    Can you please give an answer to C3POs question?
    Have you made some hardware upgrades in the past (RAM, HDD)?
    Have you changed anything?

  • Satellite P300-1FY - BSOD due video driver issue

    Hi,
    I've bought this laptop a good month ago to replace my old one that had crashed beyond repair and I've been having problems with the video drivers ever since. I initially hoped the problem would solve itself since I am in the middle of my exams and I really don't have time too much extra time to spend on mending it myself, and I also can't give it back to the store since I need certain software for my exams.
    So the problem I think lies with the video drivers for the ATI Mobility Radeon HD 3470 graphic card. Whilst I am working on my laptop my screen all of a sudden turns black and my computer freezes (including very unpleasant sound when I'm playing music at the time) an after 5 seconds it flashes back into live and displays a message saying a beelschermstuurprogramma werkte niet perfect en is nu herstela. In English this would be something like s video drivers were not functioning correctly and have now been repaired.
    This is of course hugely irritating but it became even more so a couple of weeks ago when I first got a blue screen because of a similar error. Leading me to lose half a hour of work on my laptop. (and as anyone who has ever had exams knows, half an hour is not something you can always afford to lose) I ran the wizard and it sent me to the ATI website to look for drivers.
    The inconvenience is that I've been able to find a lot of drivers, but none for the 3400 series. After searching internet for a while I finally found some drivers for these series (or they claimed to be), however this installer was corrupt. I also searched the Toshiba website but I didn't find what I was looking for.
    The laptop also freezes from time to time without the screen turning all black.
    Could someone help me with this issue?
    Louis-Philippe
    P.S.: quality of the keyboard is really bad too

    First of all you should post the exact BSOD code and what OS do you use. Then we can search on the Microsoft Knowledge Base for this issue and what is the reason for this.
    So please post the BSOD code.
    Furthermore I dont understand why you cant find a driver on the Toshiba website. The Satellite P300-1FY belongs to the PSPCCE series and therefore I can find a display driver for XP and Vista. So where is the problem? Maybe you should try to install this driver:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    But before you install the driver, remove the old driver first. Restart the notebook and clean your system with CCleaner. Restart the notebook again and then install the newest version from the Toshiba website.
    The display driver on the manufactures website (ATI) doesnt work because its only for desktop cards and not for notebooks. So you cant install it and your notebook is only tested with the Toshiba drivers.
    If the new driver doesnt work you should try to update the BIOS too. You can find on the Toshiba page.
    Good luck!!

  • Satellite P300 keeps crashing and giving me blue screens

    Hello,
    I got a Satellite P300, operating on Windows Vista home premium and its provided with a ATI Mobility Radeon HD 3650.
    My laptop keeps crashing and giving me blue screens and windows says its the cause ls my graphic driver and the eror message is Atikmdag.
    I tried everything (i think), i re-installes windows but this i had to do with making a recovery cd with the current settings because in some kinda way my F8 function doesn't work so i couldn't restore my Windows from my hard drive.
    I also got the latest Ati drivers, this doesn't help either, i also re-installed them and tried to run my laptop on the windows drivers, this doesn't help either.
    I really don't know what to do, can some one help me please?

    Are you sure that you are running video drivers downloaded from a Toshiba site? Unfortunately the drivers may not be the root of the problem so it is important to eliminate them as the cause. AMD's recommended driver removal procedure is at [http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx] and if you follow that with an installation of Toshiba drivers then your laptop should be in an as supplied state
    I'd recommend you look at this [How to troubleshoot Display driver stopped responding and has recovered, ATIKMDAG.sys type errors|http://support.amd.com/us/kbarticles/Pages/737-27116RadeonSeries-ATIKMDAGhasstoppedrespondingerrormessages.aspx]

  • Windows 8 upgrade on Satellite P300 - possible?

    I want my P300 upgrade to windows 8. Is this possible, and easy to do ?
    Thank you.

    Yes, it is possible to install Win 8 but since the Satellite P300 is not a part of the Win8 supported notebook models, you will not find Win 8 drivers.
    You will have to search and collect such drivers at your own hand
    So this can be a little bit problem but its definitely possible to use Win 8
    recommend checkign this pages:
    +Windows 8 Upgrade - Notes and Restrictions+
    http://aps2.toshiba-tro.de/kb0/TSB2A03EL0000R02.htm
    +Upgrade installation of Windows 8+
    http://aps2.toshiba-tro.de/kb0/TSB2A03ER0000R01.htm
    +Clean Install of Windows 8+
    http://aps2.toshiba-tro.de/kb0/TSB2903E20000R01.htm

  • Satellite P300 - Value Added package doesn't work after computer restart

    Hi,
    I have got Toshiba Satellite P300 PSPCCA running windows vista ultimate 64x. I can not get my soft touch button working. I downloaded latetest TVA Package and installed it. After installation it asks for restart but I dont restart my laptop and I just perform Restart Flash Card and my soft touch button works all good which is mute, media player,etc. but once I restart my laptop it stops working.
    I have tryed uninstalling and reinstalling software but no luck. I have read in toshiba forum about running CCleaner and do fresh installation but still have same problem.
    Does any of you know how to fix it.
    BTW i have got AVG internet security software on my system but have have added toshiba folder to exclude from realtime scanning just in case if its causing problem but no luck. I have searched qurantine folder and its nothing in there.
    Please help me to get my soft touch button working.
    Thanks.
    Regards,
    Jay
    Message was edited by: Jay Padia

    Hello Jay
    I agree with Akuma. All you can do is to remove preinstalled VAP from the system and install latest version again. Why you didnt follow instruction to restart notebook after VAP installation?
    I have installed VAP several times on my Satellite P200 and Satellite A300 without any problems but after latest version installation I have restarted notebook immediately. The installations procedure was finished and needed processes started in the background. I presume this is the problem on your Satellite P300.
    If nothing helps the last step is to install OS again using recovery installations DVD. After doing this you will have clean preinstalled OS and everything will work well again.

  • Satellite P300-1FN: CD/DVD drive issue - cannot read game DVD

    Hi,
    My brand new Satellite P300-1FN loaded some software ok using DVD drive but now when I put any disc in it doesn't auto run but the disc seems to run up and then a pop up window informs me after going Computer -> DVD drive to get access - Burn a Disc and wants to format.
    The discs I am putting in are game DVD and other software to load but they all give the same pop up window.
    DVD drive isTSST CDDVDW-TS-L633A
    Can you help?

    Enter Control panel > "Auto play" and define what should happen if you insert Software and games media.

Maybe you are looking for