Satellite signal indicator

Hi, please help.
Everyone must know that satellite indicator located on the low right and side of the navigation screen, right? That little graphs with green and yellow bars, indicating the strength of the satellite reception signal.
Well I used to know it to, but not anymore.
After the OVImap update I did thought usb it’s gone.
The only thing I see now is the “no connection” sign and the 0,0KB, and that’s it.
Got my brand new X6 16MB home, updated the phone, and the only update OVI suite told me to do was on maps.
It erased all my maps on the phone, started to download new geometry and when it finished, I had no maps on the phone.
So I downloaded them handpicked. OK I have them now but the satellite signal indicator…gone, on holyday I presume.
Is it due to the AGPS turned off? Or the positioning server deactivated?
Well… can you help?
Map Version 0.1.24.114
Thanks.

Its not a problem.. If its removed from the latest version.. where is the question of solution...
If you want to know the satellite signal strength goto
Application-->Location-->GPS Data-->Navigation-->Options-->Satellite Status...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Hi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

HiHi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

Hi Samantha,
Are you aware that if you restore your ipad that you will lose all data from your ipad and very difficult to get it back unless you had previously made a back-up of your data on itunes or in the cloud. and that would be on the computer you set those up on. (There are some independent apps out there that might help restore data but I don't have any experience with them...)
Also, I think if you restore on another computer you're supposed to have administrator rights and have the latest itunes update. And I think if you sync (if restoring is considered syncing with another computer, you'll be locked out of your computer or a new one.)
I don't know if there is a way for you to safely eject your ipad from your mom's laptop and find another way, but please read this
http://support.apple.com/kb/ts1275
Also, I suggest you start a new post and title it something like First, stuck on update and now on Restore on another computer. Please HELP! And then tell the story of your problem that you originally included and your follow-up efforts to restore given a suggestion on previous post (though I think you SHOULD AVOID RSTORE if you can.) And refer them to your original post
https://discussions.apple.com/message/22050045?ac_cid=tw123456#22050045
Hope this helps and if you can get back to your ios before the upgrade, stay with it. I hope it all works out for you.
FYI - If it's a new or refurb bought within the past year you might be able to have it replaced by Apple.

HT1551 led light continuously flickers apple logo appears then no signal indicator appears , how can I get back original setting?

Having trouble ,tried giving update and now the led light turns on and off continuosly apple logo appears for a few seconds then the no signal indicator can someone how I can return the unit to its original settings?

You will need to grab a micro usb cable and restore in iTunes
http://support.apple.com/kb/ht4367

Problem using LV 8.0.x with Delcom USB Visual Signal Indicator

This could end up being more of a general question about USB and LabVIEW 8.0.x. I have a USB Visual Signal Indicator from Delcom that doesn't function properly under either LV 8.0 or 8.0.1. I've had to revert back to LV 7.1 where it works fine.
Please see the attached VI and dll. This is the primary VI that doesn't work properly after the upgrade. It should vary the intensity of the LED. No error number is returned. It just seems to ignore the command. I contacted the vendor. He says it must either be a problem with LabVIEW 8.0.x or the way I initialize the variables within the Call Library Function.
Have any of you noticed any problems with USB devices when transitioning from LV7.1 to LV8.0.x?
Message Edited by Kevin Valentine on 03-22-2006 12:32 PM
Attachments:
BadDelcomVI.zip ‏41 KB

Hello,
Great to hear that it's working, and those oversights happen to all of us sometimes. I am not aware of utilities that actually monitor the USB bus data. Windows handles USB access usually by recognizing the connected device, correlating it with a driver by scanning inf files while searching for matching vender and manufacturer ID (as well as other information I think - see the C:\Windows\INF directory for examples of INF files - they are ascii files so you can open them in notepad, but I DO NOT recommend modifying them; this directory may be invisible unless you have checked the folder options to show hidden OS files). Now, the USB View program is catching that information when the device is plugged in, so it must be possible to silently monitor the USB port. The only way I know to get data from it outside of using an existing driver (and without searching the web first) would be to basically write your own. Now, it wouldn't be a full blown device driver since you could theoretically use the VISA driver development wizard to make VISA the driver for the device you would be plugging into the USB port (you specify vendor ID etc for the device in that wizard, and it writes an INF file and tells windows to go refresh it's knowledge of those files). Then you could write a program in LabVIEW using the VISA API to simply read data from the port. This process, however, would make VISA the driver for that device on your machine until you deleted the inf file from that Windows directory, and you want to be using the driver shipped with the device. Also, even if you did get the raw data, unless you knew how the firmware on your device was interpreting that data, it would likely look quite random. A better option might be to look for a function in your dll which will "passively" return that data to you in a readable format. But, the function may not exist and we would still have the trouble of interpreting the data.
Probably best to stick to your manufacturer driver and troubleshoot at a level of abstraction above interpreting the raw usb transfer data.
Best Regards,
JLS
Best,
JLS
Sixclear

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

DROID X : Signal Indicator

I've Notice on my Droid X up in Notification Bar that the signal indicator for the 3G an Wi-Fi changes from White to Blue an sometimes back to White. And i wondering if any other X owners has seen this as well on there Droid X after the Ginger update. And i was kind of wondering what this means when it does this. is blue better than white or white better than Blue. or is this a hoom an scrach my head moment.

91 here but BW cant tell what it feels like...
Oh yeah missed the BOTB Ann, congrates...

[HELP] No satellite signal being received - No issue with box or satellite?

Hi there, I have the error of no satellite signal being received however on my first Sky+ HD box I was getting this error so I switched back to our older Sky+ box and this worked fine. However on a new Sky+ HD box it is still giving me this error, despite being on a HD connection,. Any help on this matter would be highly appreciated, I've followed all the steps to try resolve the no satellite issue. Thanks.

It might be local interference. You'll have to switch off any wireless equipment in the room, and especially a wireless router, cordless phone base station and anything else that radiates signals. You should also unbundle ( if applicable ) your dish Input cables from anything else behind the box, in particular power leads. If you're using the white, pre-moulded cables from the likes of Homebase, B&Q etc, it might be an idea to replace them with good quality, double-screened cabling such as WF100 which you can buy online. Are you able to borrow someone else's HD box to test in your flat, or are you able to check out your own box on a non-communal setup?

I upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet

i upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet

I can use my iPhone only with wifi .
I don't get any signal and I can not connect to
The Internet without wifi.
When I don't use my wifi from home I have lost all connection to the net
My iPhone is on and working it does not shut down

Network Signal Indicator

For some reason, the network signal indicator on the right side "task bar" on my W510 no longer lights up in green or changes shape to differentiate between an Ethernet versus wireless connection. Any ideas?

Hello mate,
Try to reinstall access connection : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73682
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

No satellite signal on certain channels after changing boxes - getting nowhere with sky help

So I got a new sky box from sky and have been getting the No Satellite signal message on certain channels (i.e. Sky1 HD, Sky Atlantic and Sky Sports) since I changed the boxes. I have tried all the suggestions in the online help as well as through the call centre personnel who just repeat the same thing over and over. Can anyone please assist? To get things started: 1. Yes, the viewing card was paired.2. The input signals show OK for any channel that is possible to view. When you look at the input signal details for a non-working channel then Input 1 shows as NOT LOCKED and input 2 as OK.3. Communal dish and no problems in other flats.

It might be local interference. You'll have to switch off any wireless equipment in the room, and especially a wireless router, cordless phone base station and anything else that radiates signals. You should also unbundle ( if applicable ) your dish Input cables from anything else behind the box, in particular power leads. If you're using the white, pre-moulded cables from the likes of Homebase, B&Q etc, it might be an idea to replace them with good quality, double-screened cabling such as WF100 which you can buy online. Are you able to borrow someone else's HD box to test in your flat, or are you able to check out your own box on a non-communal setup?

No satellite signal status

hi
i have a problem wirh my n97 mini, when i use the GPS data there is no satellite signal status appear in the options, while it appear on the screen " Waiting for GPS" and if i try to exit the program it freeze and stop responding until i restart the mobile
plz help

" would suggest that you take it back to the Nokia Care centre that repaired your phone and ask them to try and locate/fix the problem. As you dropped the phone you will probably have to pay to have it fixed."
I also second it, much better to take it to Nokia care centre and get it repaired/fixed.

Wireless signal indicator on WVC54GCA camera

Is there a way to add a Wireless Signal Quality indicator? That would help a lot during the physical install of the device.

That is not an option.The wireless reception quality of different devices is completely different. That is because different devices have different radios and different antennas. Also the way radios and antennas are incorporated in devices are usually different as well.You need to make the wireless signal strength measurement with the devices itself. It shouldn’t be too difficult to add such an indicator in the firmware of the camera.

Demodulation of a satellite signal (sound file)

Hello,
I want to demodulate a signal from a satellite, everything works fine for a file I modulated my self, but now with the original signal I can not found anything.
The signal is MSK-modulated with 8 bits per integer, the packed bit order is LSB-first and the Sync-word should be: DAD5 6DA8 (in Hex)
I add the vi and the sound file which I tried to demodulate.
The signal I expect is:
20 14 36 86 04 15 03 01 56 00 00 08 00 02 04 40
F9 EE FE 4A 00 FF 00 FF 2F F2 DF 07 00 FF EF 22
00 00 00 00 00 00 00 0D FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF 00 5F 02 4E 02 52 02 4C
02 47 02 51 02 4E 03 FE 03 FE 01 9C 00 7B 00 05
00 05 00 06 00 05 00 00 00 06 00 06 00 05 00 07
00 66 01 B0 00 14 00 35 01 D0 00 06 00 17 01 A7
00 74 00 2B 00 0F 02 54 02 3D
hope someone of you can help me, I start to get crazy about this.
Thanks.
Attachments:
DeModulation_mp.vi ‏78 KB
DLR Signal 17_19_57 - Signal 4 (No Noise).zip ‏77 KB

Hello,
you can find examples in LabVIEW by going to Help » Find Examples. Navigate to Toolkits and Modules » Modulation >> Simulation. There are some examples for MSK. The example MT MSK Mod-Demod.vi demonstrates the
programming of an MSK Modulation Demodulation System. This should be a
good starting point.
Regards,

Problems with getting a satellite signal when usin...

I've just bought CoPilot Live 6 for my Nokia N95 8gb but 98% of the time can't get a signal from the satellites. It just keeps seaching and searching. I'm using the internal antenna, but I know its compatible cos there's a an option to chnage from internal to bluetooth in the CoPilot Live 6 software. Most of the time it doesn't get a satellite lock but i've managed to get a fix on satellites twice, but only when the sky is 100% clear of clouds.
I need help, what do you guys think?

11-Apr-2008 10:21 AM
djteknovibe wrote:
Yeah I had the slider open. I'm thinking, I don't know, maybe it'd be a good idea to get a bluetooth receiever cos I was gonna get one anyway. A Holux M-1200 which is supposed to be brilliant.
Not a bad idea investing in an external GPS as reception is going to deteriorate over the next few years as solar flare activity increases to a peak in 2011/12.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Satellite signal indicator

Similar Messages

Maybe you are looking for