Save action redirects to Process Request

Hi
I have a page with multiple tabs on it, and a "Save" button on the page. When I creae a new record and click Save, it's going back to Process Request and considering that as a new record and trying to create a new record. I am not sure why it's redirecting to process request.. Any ideas ?
Thanks!!
Ravi

When I creae a new record and click Save, it's going back to Process Request and considering that as a new record and trying to create a new record.
What's wrong with that? Save action has to save the record somewhere? What is your expectation on the click of Save button?
--Shiv

Similar Messages

Error processing request in sax parser No 'action' attribute found in XML

Hi All,
        I am doing a FILE to JDBC Scenario. I just want to send a data from file to Sql Db table. For this I have written a stored procedure to insert the row in a table.
This is the message mapping for FILE to JDBC .
Sender                                                                   Receiver
*FILESENDER_MT 1..1    FILESENDER_DT     * SPRECEIVER_MT    1..1
    .NO                    1..1    xsd:string                    * Statement           1..1   string
    .Name                1..1    xsd:string                      *user_PROC       1..1
action            1..1required
                                                                            *No
isInput        1..1 string
                                                                                type           1..1 string
                                                                            *Name
                                                                                isInput        1..1 string
                                                                                type           1..1 string
Mapped Values....
Statement is mapped with <b>FILESENDER_MT</b>
action attribute is mapped with "<b>EXECUTE</b>" Constant
No is mapped with <b>NO</b>
Name is mapped with <b>Name</b>
for both isInput is mapped with <b>TRUE</b>
for both type is mapped with <b>CHAR</b>
Here is the my stored procedure.....
CREATE PROCEDURE [dbo].[user_PROC]
@NO char(10), @Name char(10) AS
insert into FILE2JDBC values('a','ab')
GO
when i run this stored procedure in Sql directly it was executed successfully....
I have checked In SXMB_MONI status is showing green...
xml messages from SXMB_MONI ....
this is the message from payloads of Inbound Message
<PRE> <?xml version="1.0" encoding="UTF-8" ?>
- <ns0:FILESENDER_MT xmlns:ns0="http://www.prospectadelhi.com/DELHI_FILE2JDBC">
<NO>111</NO>
<NAME>murthy</NAME>
</ns0:FILESENDER_MT></PRE>
this is the message from payloads of Request Message Mapping
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:SPRECEIVER_MT xmlns:ns0="http://www.prospectadelhi.com/DELHI_FILE2JDBC">
- <Statement>
- <user_PROC>
<action>EXECUTE</action>
- <NO>
<isInput>TRUE</isInput>
<type>CHAR</type>
</NO>
- <Name>
<isInput>TRUE</isInput>
<type>CHAR</type>
</Name>
</user_PROC>
</Statement>
</ns0:SPRECEIVER_MT>
this is the error showing in runtime workbench>component monitoring->communication channel monitoring-->Receiver Communication Channel....
<b>Error while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)</b>
Can any body tell me whether the problem is in Mapping or in Data Type Structure..
Please resolve this issue....
Thanks in Advance,
Murthy.

<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:SPRECEIVER_MT xmlns:ns0="http://www.prospectadelhi.com/DELHI_FILE2JDBC">
- <Statement>
<b>- <user_PROC>
<action>EXECUTE</action></b>
- <NO>
<isInput>TRUE</isInput>
<type>CHAR</type>
</NO>
- <Name>
<isInput>TRUE</isInput>
<type>CHAR</type>
</Name>
</user_PROC>
</Statement>
</ns0:SPRECEIVER_MT>
The Action should be a Attribute of Element user_Proc as,
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:SPRECEIVER_MT xmlns:ns0="http://www.prospectadelhi.com/DELHI_FILE2JDBC">
- <Statement>
<b>- <user_PROC action="Execute"></b>- <NO>
<isInput>TRUE</isInput>
<type>CHAR</type>
</NO>
- <Name>
<isInput>TRUE</isInput>
<type>CHAR</type>
</Name>
</user_PROC>
</Statement>
</ns0:SPRECEIVER_MT>
Likewise isInput and Type should be Attributes and not Elements .
Regards
Bhavesh

Post-processing request failed one or more post processing action failed .

Beginning post-processing of request 3064071 on node SURYA at 03-NOV-2008 17:07:20.
Post-processing of request 3064071 failed at 03-NOV-2008 17:07:21 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
oppserver log file:
11/4/08 9:17:55 PM] [main] Starting GSF service with concurrent process id = 1100320.
[11/4/08 9:17:55 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[11/4/08 9:17:57 PM] [Thread-21] Service thread starting up.
[11/4/08 9:17:57 PM] [Thread-22] Service thread starting up.
[11/4/08 9:22:48 PM] [OPPServiceThread0] Post-processing request 3066109.
[11/4/08 9:22:48 PM] [1100320:RT3066109] Executing post-processing actions for request 3066109.
[11/4/08 9:22:49 PM] [1100320:RT3066109] Starting XML Publisher post-processing action.
[11/4/08 9:22:49 PM] [1100320:RT3066109]
Template code: XXINA_VIOLET_SUPP_EXE
Template app: SQLAP
Language: en
Territory: US
Output type: PDF
[110408_092250799][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[110408_092250800][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[110408_092250800][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[110408_092250801][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[60]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[UTF8]
[110408_092250801][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[110408_092250801][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=surya.inatech.com)(PORT=1531)))(CONNECT_DATA=(SID=TRAIN)))]
[110408_092250801][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[110408_092250802][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[110408_092250802][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[true]
[110408_092250802][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[110408_092250802][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[1]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[110408_092250808][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[110408_092250809][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[110408_092250809][][EXCEPTION] [DEBUG] [APPLTMP]:[u02/oracle/traincomn/temp]
[110408_092250809][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[110408_092250809][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[110408_092250809][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[110408_092250809][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[110408_092250811][][EXCEPTION] [DEBUG] [dbcfile]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250811][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[110408_092250811][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[110408_092250812][][EXCEPTION] [DEBUG] [path.separator]:[:]
[110408_092250812][][EXCEPTION] [DEBUG] [APPLCSF]:[u02/oracle/traincomn/admin]
[110408_092250812][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[110408_092250812][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[110408_092250812][][EXCEPTION] [DEBUG] [user.country]:[US]
[110408_092250812][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[110408_092250812][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[110408_092250813][][EXCEPTION] [DEBUG] [user.dir]:[u02/oracle/traincomn/admin/log/TRAIN_surya]
[110408_092250813][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[110408_092250813][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[110408_092250813][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[110408_092250813][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[110408_092250813][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250813][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[tmp]
[110408_092250813][][EXCEPTION] [DEBUG] [line.separator]:[
[110408_092250813][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[110408_092250813][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[110408_092250813][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[110408_092250813][][EXCEPTION] [DEBUG] [cpid]:[1100320]
[110408_092250814][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[110408_092250814][][EXCEPTION] [DEBUG] [java.library.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u02/oracle/trainora/iAS/lib:/u02/oracle/trainora/8.0.6/network/jre11/lib/i686/native_threads:/u02/oracle/trainora/8.0.6/network/jre11/lib/linux/native_threads:/u01/oracle/trainappl/cz/11.5.0/bin:/u02/oracle/trainora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[110408_092250814][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[110408_092250814][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[110408_092250814][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[110408_092250815][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-34.EL]
[110408_092250815][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[110408_092250815][][EXCEPTION] [DEBUG] [user.home]:[home/oracle]
[110408_092250815][][EXCEPTION] [DEBUG] [user.timezone]:[Asia/Calcutta]
[110408_092250815][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[110408_092250815][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[110408_092250815][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[110408_092250815][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[110408_092250815][][EXCEPTION] [DEBUG] [java.class.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u02/oracle/traincomn/java/appsborg2.zip:/u02/oracle/traincomn/java/apps.zip:/u02/oracle/trainora/8.0.6/forms60/java:/u02/oracle/traincomn/java]
[110408_092250815][][EXCEPTION] [DEBUG] [user.name]:[oracle]
[110408_092250815][][EXCEPTION] [DEBUG] [DBCFILE]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250816][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[110408_092250816][][EXCEPTION] [DEBUG] [java.home]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre]
[110408_092250816][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[110408_092250816][][EXCEPTION] [DEBUG] [user.language]:[en]
[110408_092250816][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[110408_092250816][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[110408_092250816][][EXCEPTION] [DEBUG] [logfile]:[u02/oracle/traincomn/admin/log/TRAIN_surya/FNDOPP1100320.txt]
[110408_092250816][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[110408_092250816][][EXCEPTION] [DEBUG] [java.ext.dirs]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[110408_092250816][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[110408_092250817][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[110408_092250817][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[110408_092250817][][EXCEPTION] [DEBUG] [file.separator]:[]
[110408_092250817][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[110408_092250817][][EXCEPTION] [DEBUG] [APPLOUT]:[out/TRAIN_surya]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[11/4/08 9:23:00 PM] [UNEXPECTED] [1100320:RT3066109] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.UnsupportedEncodingException: &Encoding
     at sun.io.Converters.getConverterClass(Converters.java:215)
     at sun.io.Converters.newConverter(Converters.java:248)
     at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
     at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
     at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
     at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
     at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
     at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
     ... 17 more
[11/4/08 9:23:00 PM] [1100320:RT3066109] Completed post-processing actions for request 3066109.
[11/5/08 11:00:13 AM] [OPPServiceThread0] Post-processing request 3067075.
[11/5/08 11:00:15 AM] [1100320:RT3067075] Executing post-processing actions for request 3067075.
[11/5/08 11:00:15 AM] [1100320:RT3067075] Starting XML Publisher post-processing action.
[11/5/08 11:00:15 AM] [1100320:RT3067075]
Template code: XXINA_XML_TEST_TEMPLATE
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 11:00:58 AM] [UNEXPECTED] [1100320:RT3067075] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.UnsupportedEncodingException: &Encoding
     at sun.io.Converters.getConverterClass(Converters.java:215)
     at sun.io.Converters.newConverter(Converters.java:248)
     at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
     at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
     at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
     at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
     at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
     at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
     ... 17 more
[11/5/08 11:01:00 AM] [1100320:RT3067075] Completed post-processing actions for request 3067075.
[11/5/08 12:20:30 PM] [OPPServiceThread1] Post-processing request 3067153.
[11/5/08 12:20:30 PM] [1100320:RT3067153] Executing post-processing actions for request 3067153.
[11/5/08 12:20:30 PM] [1100320:RT3067153] Starting XML Publisher post-processing action.
[11/5/08 12:20:30 PM] [1100320:RT3067153]
Template code: XXINA_XML_TRANS
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 12:20:37 PM] [UNEXPECTED] [1100320:RT3067153] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.FileNotFoundException: /D:\Inahome\Raja Ramesh\Official\XML Publisher -Internal Project\SD - XML Publisher\31-oct\subtemp.rtf (No such file or directory)
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
     ... 17 more
[11/5/08 12:20:38 PM] [1100320:RT3067153] Completed post-processing actions for request 3067153.
[11/5/08 5:32:38 PM] [OPPServiceThread0] Post-processing request 3067574.
[11/5/08 5:32:39 PM] [1100320:RT3067574] Executing post-processing actions for request 3067574.
[11/5/08 5:32:39 PM] [1100320:RT3067574] Starting XML Publisher post-processing action.
[11/5/08 5:32:39 PM] [1100320:RT3067574]
Template code: XXINA_XML_TEST
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 5:33:11 PM] [1100320:RT3067574] XML Publisher post-processing action complete.
[11/5/08 5:33:11 PM] [1100320:RT3067574] Completed post-processing actions for request 3067574.
[11/5/08 5:36:51 PM] [OPPServiceThread1] Post-processing request 3067581.
[11/5/08 5:36:51 PM] [1100320:RT3067581] Executing post-processing actions for request 3067581.
[11/5/08 5:36:51 PM] [1100320:RT3067581] Starting XML Publisher post-processing action.
[11/5/08 5:36:51 PM] [1100320:RT3067581]
Template code: XXINA_XML_TEST
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 5:36:56 PM] [1100320:RT3067581] XML Publisher post-processing action complete.
[11/5/08 5:36:56 PM] [1100320:RT3067581] Completed post-processing actions for request 3067581.
getting this error in OPP server log file
any solutions ?
regards,
Arul.

Caused by: java.io.FileNotFoundException: /D:\Inahome\Raja Ramesh\Official\XML Publisher -Internal Project\SD - XML Publisher\31-oct\subtemp.rtf (No such file or directory)Did you verify this?

How to clear grey loading screen and animated gif (Dynamic Action with "Show Processing" on submit)

APEX V4.2.3
DB 11.2
I have a classic report on page 1. I have a region button called "Export" (defined by a submit dynamic action with "show processing=Yes") that submits the page and then via a branch directs me to page 2 which has a slightly different version of the report on page 1 (i.e. no breaks) which I want to capture as a CSV export. Therefore I've set the report template on page 2 to " Export:CSV".
Now when I click on the page 1 export button the grey screen and loading gif appears indicating that the report is executing and then as expected, page 2 doesn't appear but instead the standard open/save window's dialog box appears asking to open or save the generated CSV file. All good..but the grey loading screen remains. How do I clear this loading screen and get back to the context of page 1 ?
thanks in advance
PaulP

Hi PPlatt,
We would love to help but you left out one crucial part of the puzzle: namely how does your CSV report get exported. With the way it is setup (a redirect to another page), I'm going to assume you do that because you have some PL/SQL on that page that prints the CSV.
Now there are two questions that are crucial here:
- How do we stop the icon from bugging us on the screen
- How do we communicate with the browser that it should no longer display the loading icon
The first question is rather easy, two simply lines of codes can do that:
$('#apex_wait_popup').hide();
$('#apex_wait_overlay').hide();
But when do we use this code? Quite simple when the document is downloaded. When is it downloaded? At the end of the PL/SQL code that prints the document to the browser.
What you could do is at the end of that code give an application item a certain value. For example :AI_PRINTED := 'Y';
Then all you need to do is let the browser ask for the value. You could do this by using JavaScript to continuously fire AJAX to the server using a JS timing event:
http://www.w3schools.com/js/js_timing.asp
Better would be a Server send event, but since you left out another crucial piece of information: your browser, I will not go deeper into this.
Start this timing event when someone asks for the document, and end it as soon as the process returns that :AI_PRINTED equals 'Y'.
Despite the lack of information, I hope I have given, or at least inspired you to get to the solution.
Regards,
Joni

Is it possible in a before-page-submit dynamic action to cancel processing?

I have a page where when the user submits, I check certain conditions and prompt the user with a confirmation ("are you really sure you want to submit this...?") and if they press OK (javascript true) continue to submit as normal, else (javascript false) the page should stop submitting.
I know I can do this by putting Javascript code on whatever buttons I need to such that they're prompted from whatever appropriate button but I then thought it might be more elegant to just put it in one place in a before-page-submit DA.
So I figured that in my DA for a before-page-submit I'd try explicitly returning true or false thinking that I returned true it would continue to submit but if false it would stop submitting. Unfortunately no dice.
Example:
Dynamic Action
Before Page Submit
Condition (Javascript Expression): (this.data=="SAVE")||(this.data=="MULTI_ROW_DELETE")
var response=checkPbcDml();
alert(response); //for debugging and I do properly get true or false back
if(!response)
return(false);
else
return(true);So I'd like return(false) to stop the submission process (was only guessing that it'd work, and it doesn't). Is there any other javascript command that I could execute to cancel the submission processing?
Yes I know that I really can do this on my buttons and it'll work...
javascript:if(checkPbcDml())apex.confirm(htmldb_delete_message,'DELETE');
javascript:if(checkPbcDml())apex.submit('SAVE');...but was just hoping to do something in the DA as a matter of elegance to put code in one place rather than two places.
Edited by: gti_matt on Jun 14, 2012 10:30 AM

trent wrote:
Personally, I'd just try to utilise the confirm action - probably achieved by incorporating the checkPbcDml() function into the dynamic action condition, at the sime time you are checking the request value.Aha! That's it.
The "Confirm" DA action's OK/Cancel response is evaluated by the "Before Page Submit" and cancels the processing.
What I did was:
1. Looked at my old function's conditions:
function checkPbcDml()
if (($v('P265_FREEZE_FLAG')=='Y') && ($v('P265_PUR_MFG')=='M'))
return(true);
else
return(confirm("Part Bid Categories information will only be saved from this page for frozen &F182_MAKE_TEXT. parts.\nDo you want to continue with this action anyway?"));
}2. Appended them to the existing DA conditions that were evaluating the save or multi-row-delete request:
((this.data=="SAVE")||(this.data=="MULTI_ROW_DELETE")) && (!(($v('P265_FREEZE_FLAG')=='Y') && ($v('P265_PUR_MFG')=='M')))3. And created a Confirm action with that message text and removed my checkPbcDml() function.

How to automatically confirm check pay run (payment process request) in R12

Payment Method = check
The payment process profile (ppp) settings are as follows:
Processing Type=Printed
Payment Completion Point = When the Payment Instruction is Formatted
Default Payment Document= blank/null
Payment File=Send to File
My question is this. Is it possible or how do you configure oracle payments (PAYMENT PROCESS PROFILE [PPP] and/or PAYMENT PROCESS REQUEST [PPR])for check payments created as a file output like you have in 'EFT' instead of printing the checks and CONFIRM the PPR/payments AUTOMATICALLY after the checks/payments have been formatted.
The reason we are doing this is because we want an external agency to print the checks for my organisation.
What is happening at the moment is that the PPR runs and the payments file is created successfully. At this point, the PPR is in 'FORMATTED - READY FOR RECORDING' status. The PPR then remain in this status until it is manually confirmed by clicking the 'Take Action' icon in the 'payment instruction' tab and then clicking on 'CONFIRM'.
If the PPR is left in the above status, then the next submitted check pay run errors because the payment document(s) are still locked by the pay run that is in the 'Formatted - Ready for Recording' state.
If it is not possible to configure Oracle payments to auto confirm the check pay run of this type, is an API available that can be called to confirm check payments - once they are in the formatted status.
I've looked at the following notes in 'My Oracle Support', but they are not much use.
Note 1097547.1 is related to bug 8781032 which talks about "Automatic Initiate when Payment Process Request is Complete".
and then Note 1215392.1 relates to enhancement request.
Bug 10142423: GIVE AN OPTION IN PAYMENT PROCESS PROFILE TO SUBMIT POSITIVE PAY FILE AUTOMATIC
Thanks.

Try running this SQL
SELECT
r.calling_app_id,
r.created_by,
r.payment_service_request_id,
r.creation_date,
r.call_app_pay_service_req_code,
fa.application_name,
fu.user_name,
r.payment_service_request_status
FROM
iby_pay_service_requests r,
fnd_application_vl fa,
fnd_user fu
WHERE r.payment_service_request_id = <<your concurrent request ID>>
AND r.calling_app_id = fa.application_id(+)
AND r.created_by = fu.user_id(+)

Wierd ColdFusion erro : Error occurred while processing request.

Hi there ,
I am a graduate student and new to ColdFusion.I started working on this already developed project by someone couple of years ago , and the client wants some changes to be done.so i went ahead and did some small modifications to the appearance of the form(insertdata.cfm page) like adding some more options to a drop down menu , changing the label names and so on and am very sure this changes would not have effected the application in any way.And the place where the message says the error can be , i didnt even touch that part.Now after 4 days i start getting this weird error saying " Error Occurred While Processing Request
The system has attempted to use an undefined value, which usually indicates a programming error, either in your code or some system code.
Null Pointers are another name for undefined values."
And this happens randomly not everytime i access the website or different webpages.Here are the errors.
The error occurred in /export/web/virtual/web3_unt_edu/cps/webaccess/sites/Amarillo/index.cfm: line 8
5 :   SELECT UserName,Password FROM user_data WHERE UserName=
6 :   <cfqueryparam value="#FORM.UserName#" maxlength="8">
7 :     AND Password=
8 :   <cfqueryparam value="#FORM.Password#" maxlength="8">
9 :   </cfquery>
10 :   <cfif MM_rsUser.RecordCount NEQ 0>
I tried adding " cfsqltype="cf_sql_clob" " in cfqueryparam also on my friends advice , but it doesnt work out.
2nd ERROR
The error occurred in /export/web/virtual/web3_unt_edu/cps/webaccess/sites/Amarillo/InsertData.cfm: line 13
11 :   <cflocation url="#MM_failureURL#" addtoken="no">
12 : </cfif>
13 : <cfquery name="rsDay" datasource="cps">
14 : SELECT days FROM days
15 : </cfquery>
3rd ERROR
The error occurred in /export/web/virtual/web3_unt_edu/cps/webaccess/sites/Amarillo/InsertData.cfm: line 27
25 : ORDER BY ethnicity ASC
26 : </cfquery>
27 : <cfquery name="rsHospitals" datasource="cps_amarillo">
28 : SELECT *
29 : FROM hospitals
Can anyone help me with this. I have to get the modifications done in 2 weeks.
Thank you
Craj

Hi Mak
         I can get the stack trace for now , but here is my complete code , may be this ll give u complete idea .........
The index page where i am getting the first error
<cfif IsDefined("FORM.UserName")>
<cfset MM_redirectLoginSuccess="menu.cfm">
<cfset MM_redirectLoginFailed="../../fail.htm">
<cfquery name="MM_rsUser" datasource="cps_amarillo">
    SELECT UserName,Password FROM user_data WHERE UserName=
<cfqueryparam value="#FORM.UserName#" maxlength="8">
    AND Password=
<cfqueryparam value="#FORM.Password#" maxlength="8">
</cfquery>
<cfif MM_rsUser.RecordCount NEQ 0>
    <cftry>
      <cflock scope="Session" timeout="30" type="Exclusive">
        <cfset Session.MM_Username=FORM.UserName>
        <cfset Session.MM_UserAuthorization="">
      </cflock>
      <cfif IsDefined("URL.accessdenied") AND true>
        <cfset MM_redirectLoginSuccess=URL.accessdenied>
      </cfif>
      <cflocation url="#MM_redirectLoginSuccess#" addtoken="no">
      <cfcatch type="Lock">
        
      </cfcatch>
    </cftry>
</cfif>
<cflocation url="#MM_redirectLoginFailed#" addtoken="no">
<cfelse>
<cfset MM_LoginAction=CGI.SCRIPT_NAME>
<cfif CGI.QUERY_STRING NEQ "">
    <cfset MM_LoginAction=MM_LoginAction & "?" & XMLFormat(CGI.QUERY_STRING)>
</cfif>
</cfif>
<cfinclude template="../../../Connections/cps_amarillo.cfm">
<cfif IsDefined("FORM." & "UserName")>
<cfscript>
    MM_valUsername=Evaluate("FORM." & "UserName");
    MM_fldUserAuthorization="";
    MM_redirectLoginSuccess="menu.cfm";
    MM_redirectLoginFailed="../../fail.htm";
    MM_dataSource=MM_cps_amarillo_DSN;
    MM_queryFieldList = "UserName,Password";
    if (MM_fldUserAuthorization IS NOT "") MM_queryFieldList=MM_queryFieldList & "," & MM_fldUserAuthorization;
</cfscript>
<cfquery datasource=#MM_dataSource# name="MM_rsUser" username=#MM_cps_amarillo_USERNAME# password=#MM_cps_amarillo_PASSWORD#>
SELECT #MM_queryFieldList# FROM user_data WHERE UserName='#Replace(MM_valUsername,"\'","
","ALL")#' AND Password='#FORM.Password#'
</cfquery>
<cfif MM_rsUser.RecordCount GREATER THAN 0>
    <cfscript>
      // username and password match - this is a valid user
      Session.MM_Username = MM_valUsername;
      if (MM_fldUserAuthorization IS NOT "") {
        Session.MM_UserAuthorization = MM_rsUser[MM_fldUserAuthorization][1];
      } else {
        Session.MM_UserAuthorization = "";
      if (IsDefined("accessdenied") AND true) {
        MM_redirectLoginSuccess = Evaluate("accessdenied");
    </cfscript>
    <cflocation url="#MM_redirectLoginSuccess#" addtoken="no">
</cfif>
<cflocation url="#MM_redirectLoginFailed#" addtoken="no">
<cfelse>
<cfscript>
    MM_LoginAction = CGI.SCRIPT_NAME;
    if (CGI.QUERY_STRING NEQ "") MM_LoginAction = MM_LoginAction & "?" & CGI.QUERY_STRING;
</cfscript>
</cfif>
<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Amarillo Login Screen</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<script type="text/JavaScript">

</script>
</head>
<body>
<div id="Layer2" style="position:absolute; left:26px; top:112px; width:683px; height:56px; z-index:2">
<div align="right"><font size="+6"><strong><font color="#999999" size="5" face="Verdana, Arial, Helvetica, sans-serif">Seniors
    / Volunteers for Childhood Immunization<br />
    </font></strong></font><font color="#999999" size="5"><strong><font size="4" face="Verdana, Arial, Helvetica, sans-serif">Web
    Access Database</font></strong></font></div>
</div>
<div id="instructions" style="position:absolute; left:160px; top:182px; width:259px; height:30px; z-index:3"><font color="#999999" size="5"><strong><font size="4" face="Verdana, Arial, Helvetica, sans-serif">Please
enter your user name and password...</font></strong></font></div>
<div id="LayerLogin" style="position:absolute; left:427px; top:182px; width:310px; height:94px; z-index:4">
<form ACTION="<cfoutput>#MM_loginAction#</cfoutput>" name="form1" id="form1" method="POST">
    <p><img src="../../../images/image14.gif" alt="" name="UserNameImg" width="150" height="21" border="0" id="UserNameImg" />
      <input name="UserName" type="text" id="UserName" size="15" maxlength="15" />
      <br />
      <img src="../../../images/image15.gif" alt="" name="PasswordImg" width="150" height="21" border="0" id="PasswordImg" />
      <input name="Password" type="password" id="Password" size="17" maxlength="15" />
    </p>
    <p align="right">
      <input name="Submit" type="submit" id="Submit" onclick="MM_validateForm('UserName','','R','Password','','R');return document.MM_returnValue" value="Log In!" />
    </p>
</form>
</div>
</body>
</html>
I checked it again and again , but the code seems to work well on a local host ..... but not whn i upload it to server. Please let me know where i am goin wrong.
Thank you

Problem configuring SSO: "Oracle SSO Warning - Unable to process request"

I'm having difficulty getting a sample application to work with SSO, and I was hoping someone could point me in to the right direction.
We've got 2 separate systems, call them ASserver and SSOserver. ASserver is running Oracle 9i AS, SSOserver is the infrastructure server (e.g. OID and SSO).
The application runs just fine on ASserver without SSO.
I made the change to mod_osso.conf so that the URL for the application is now protected, and added a partner application entry to the application (more on that in a moment).
When I go to the URL for the partner application, the browser is properly redirected to the SSO server and I am prompted to log in. After logging in, I get an error page with the error "Oracle SSO Warning - Unable to process request" (the URL is something like http://<ASserver>/osso_login_success?urlc=... etc).
Several questions:
- can my servlet just be a plain servlet, or does it need to do the various things described in the "SSO Application Developer's Guide"?
- when configuring the partner application on the SSO server, are success url and logout url supposed to be the osso_login_success and osso_logout_success URLs? Should they be on the ASserver or the SSOserver?
Any other recommendations?
Thanks,
dwh

Okay, solved. I am pretty sure I was suffering from the condition described in metalink Note:227221.1, "Oracle SSO Warning Logging On to Midtier Using Mozilla Based Browser" (http://metalink.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=227221.1)
although it was happening in IE as well.
Essentially, I modified the entry for the partner application to change the port numbers from 7778 to 7777, and now it works.
I think I also had several entries for the app server in the SSO server, and I don't know which one it was using. I got rid of all of them except the one named <oraclehome>.<restofdomain>, e.g. oas.foobar.com, where "oas" is the name of my app server's Oracle home.

JDBC receiver adapter - Error processing request in sax parser

Hello,
I want to INSERT idoc data via JDBC adapter into a MS SQL database. After digging through SAP Help, numerous blogs and forum discussions on SDN and even posting an OSS message I still get the same error:
'Error: TransformException error in xml processor class: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)'
When testing my mapping in the Integration Repository the resulting XML message is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Employee xmlns:ns0="http://prodrive.nl/xi/HRMasterdata/HRMD_A_2_d_bcommerp">
   <STATEMENT>
      <T_PD_Employees action="INSERT">
         <access>
            <KeyTag>00088888</KeyTag>
            <PerNo>00088888</PerNo>
         </access>
      </T_PD_Employees>
   </STATEMENT>
</ns0:Employee>
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Can anyone help me solve this problem? I'm lost.
Best regards,
Roelof Jan Bouwknegt

Hi Bhavesh,
I have tried out the change you suggested. Without success. Message I get back is
- 2006-12-28 10:34:08 CET: Error: TransformException error in xml processor class: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
structure in testtool:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Employee xmlns:ns0="http://prodrive.nl/xi/HRMasterdata/HRMD_A_2_d_bcommerp">
   <STATEMENT>
      <T_PD_Employees action="INSERT">
         <ACCESS>
            <KEYTAG>00088888</KEYTAG>
            <PERNO>00088888</PERNO>
         </ACCESS>
      </T_PD_Employees>
   </STATEMENT>
</ns0:Employee>
Somehow the SAX parser doesn't like the result of my mapping. Maybe there is something wrong with the structure cardinality. Let me describe what I have built:
XSD:
WA_T_PD_Employees - Complex Type
> STATEMENT - Element - Occurence = 1
>> T_PD_Employees - Element - Occurence = 1
>>> STATEMENT - Attribute - Occurence = optional
>>> access - Element - Occurence = 1..Unbounded
Best regards Roelof Jan and thanks for your quick response

Error processing request - APEX 4.2.0.00.27

Hi,
In application that I'm working on, there is possibility to create a new system user.
After the user is created, user manages to log-in and system asks for new password.
After you change the password for the first time, you are redirected to page that just says „Changed password“ and there is only one button „Return“.
I presume that this is some APEX internal/system page.
When you click on that button, it shows error:
Error processing request.
ORA-01403: no data found
This happens only when trying log-in for the first time!
Can someone help with this error?
Is that some APEX internal error/bug?
many thanks
regards,
Danijel

Hi Tward,
I'm doing some JQuery ToolTip stuff for an Interactive Report... It always works for the first page, but if I search on something.. After pressing the "GO" button the tooltips no longer workWhen you press 'Go' button, the report region refreshes via AJAX. So any 'bind's you made on page load are gone. So you should use 'live' instead of 'bind'
See http://api.jquery.com/live/
If you view the Source (and it says "Original Source" in the titlebar of Internet Explorer), the Source appears to be the same as the original Interactive Report.
Does that make sense... What is being displayed on the screen is not what is in the "View Source" window...IE is not for Developers. 'Inspect the report' using Firebug in Firefox. You can see exactly what is happening.
Regards,
Hari

Error processing request in sax parser: Error when executing statement...

Hello,
I want to INSERT data from R/3 System to AS400 via JDBC adapter into a DB2 database. The interfaces from R/3 are Ok. but i have some problems to use the JDBC in DB2 Systems. The message in comunitation channel is:
" Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPE106TST' (structure 'STATEMENT'): java.sql.SQLException: SPE106TST de SADMT1 no válido para la operación."
in the SXMB_MONI -> Request Message Mapping payloads this:
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Please Can anyone help me solve this problem? I'm lost.
Best regards,
Edited by: Nicola Occhipinti on May 22, 2008 7:40 PM

Hi Nicola,
This error occurs when the receiver side structure is incorrect.
Your structure seems to be correct.
Please use lower case for action, access and table.
Please check whether the field names are exactly the same as in the actual Database table sadmt1.SPE106TST.
Check if the table has permissions to write.
You can try an alternate structure without using table tag.
<ns0:MT_XMLSQL_SPEC xmlns:ns0="urn:damm.com/pi/EmployeeMasterData">
<STATEMENT>
<sadmt1.SPE106TST action="INSERT">
<access>
<CODEMP>D</CODEMP>
<CODPRO>00202339</CODPRO>
<NOMPRO>ROSIQUE PERALSGENIS</NOMPRO>
<DIRPRO>GIRONA</DIRPRO>
<POBPRO>S. VICENS HORTS</POBPRO>
<RUTA>0</RUTA>
<ORDEN>0</ORDEN>
<NOMINA>S</NOMINA>
</access>
</sadmt1.SPE106TST>
</STATEMENT>
</ns0:MT_XMLSQL_SPEC>
Hope your problem gets solved.
-Shamly

Error: Server was unable to process request. --- Object reference not set

Hi All,
I am using ALSB 2.6.
In the project, i have requirement to do transformation of incoming request with CData Tag and getting a response from the remote service.
I have configured the Proxy Service and Business Service with a message route in which transformation is happening using replace action and adding a XSLT there.
While sending the request from ALSB Test Console , its doing the transformation correctly as follows:
Transformed Request at ALSB
<soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<lif:MultipleTermLifeQuotePublic xmlns:lif="https://www.farmerslife.com/LifeNetWS/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<lif:xmlInput>
<TERM_LIFE_RATE_QUOTE>
<Quote_Request Quote_Sequence = "100">
<Face_Amount>
1000.00
</Face_Amount>
<Gender>
male
</Gender>
<Age>
100
</Age>
<Level_Term_Years>
100
</Level_Term_Years>
<Type>
string
</Type>
<Nicotine>
true
</Nicotine>
<CIR_Amount>
1000.00
</CIR_Amount>
<State>
string
</State>
<Waiver_Premium>
false
</Waiver_Premium>
</Quote_Request>
</TERM_LIFE_RATE_QUOTE>
</lif:xmlInput>
</lif:MultipleTermLifeQuotePublic>
</soapenv:Body>
After transformation, when its passing through Business Service its giving the followin error at ALSB console
<soap:Body xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Fault>
<faultcode>soap:Server</faultcode>
<faultstring>
Server was unable to process request. ---> Object reference not set to an instance of an object. </faultstring>
<detail/>
</soap:Fault>
</soap:Body>
[b]When i am sending the same request through SOAP UI, I am getting a correct response.
Can any one guide me what to do regarding this, where i am going wrong.
Please try to reply as soon as possible. Its an urgent issue.

That error you're getting is a typical error message from Windows web services. It simply means there was something unspecified that was wrong with your message. You'll need to find a way to extract the actual message being sent in both the "good" and "bad" cases and look at the differences. You can do that in ALSB with a "Log" action.

Save "Actions"

Is there a way in FCE to save "actions" similar to what can be done in Photoshop?
Example- You come up with process you like on applying "Ken Burns effect" to pictures. Is there a way to save this and apply as you come to other pictures you would like to apply the same effect instead of going through all the steps to accomplish each time?
Thanks

Yes-
Select the clip you have on the timeline that has the filters and effects applied that you like and want to use on other clips.
Type Command - C to copy the clip.
Now select the clip or clips (shift-clicking to select multiple clips) that you want to apply the same filters and effects to and type Option - V.
A dialog box will open that allows you to choose what attributes of the clip you have copied to apply to the selected clip or clips. Make your choice and click OK, and they will all be applied.
Note that if the clips you have selected to paste the attributes to are of different length, you may want to uncheck "Scale Attribute Times", or the motions will be lengthened or shortened to fit the length of the clip you are pasting in to.
Hope this helps.
MTD

No server was available to process request. Please try again later. (Error:

In version BO XI R3.1 SP4, we face an error intermittently while trying to save large deski reports viewed in HTML format to pdf . It displays errors "No server was available to process request. Please try again later. (Error: RFC 00101)" "
The same error pops up intermittently while navigating between pages . This error is also seen for refresh of some of the reports . Anyone has come across this intermittent errors with the SP4 ?
Regds
Ksenia

What application server are you using ? IIS
how many deski report servers and cache servers do you have ? 4 Deski Report servers, 1 Cache server
do you see your deski processes restarting or hanging during those errors ? No, deski servers work fine
you might be running out of capacity. : No we have enough storage , also the server resources are not much utilized. Also this also occurs when only one user is logged onto the system

Save or Export Batch Processing

I have created several different batch processing in Acrobat 9 for Windows to reduce the size of PDF files as well as OCR the files.
I do the same thing with Acrobat 10 and I can easily export the processes (it's called Actions) and reimport them into another computer with Acrobat 10 installed.
My question is, how do I save/export those batch processing steps in Acrobat 9 so I can re-import them when I needed?

Thanks for the super fast reply. I found them under (it's WinXP OS):
C:\Documents and Settings\%username%\Application Data\Adobe\Acrobat\9.0\Sequences

Save action redirects to Process Request

Similar Messages

Maybe you are looking for