Save custom filter for every document?

Hello,
sorry for my english ;)
In FW CS3 it was possible to save a custom filter and so this
filter was always shown in den filter list even when you open an
new document.
Now in FW CS4 you can only save a filter oder a style which
is addicted to the current document.
When you open a new one, you have to select every time your
saved filter or stile set.
This is no help and in my eyes a step back. I didn´t
found any solution to access my custom filter or stile set right
away when I open a new document.
It doesn´t help to save the workspace area and options
in a own set .. on every start, the stile window is empty and you
hav to select one.
Does sombody know a way to make a own set or stile selectable
(instant) to new documents?
Thank you for any hint.
Regards.
switch

8switch8 wrote:
> Hello,
>
> thank you all, but I get no success :( I don?t kno if
it?s my bad english
> knowledge or I have another FW4 build (which is
10.0.0.495).
>
> Here is another screenshot which try to explain my
problem.
>
http://img143.imageshack.us/img143/4458/nostylemi4.jpg
>
> I can?t set "meine" Style to default value so I get them
in every new document
> in the current and future FW sessions. It makes no
effect when I save my
> workspace, I have to select "meine" once again in every
document and every
> session.
>
> FW3 was a bit userfrendly in this case ;)
>
> Best regards.
>
> switch
>
Maybe this video will help:
www.newmediaservices.ca/jim_babbage/demos/styles/styles.html
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

Similar Messages

  • Re: Custom Filter for a table

    Can someone point me to a tutorial for overriding the FilterableQueryDescriptor to build custom filter for a table?

    In the example you provided, the querylistener is invoked only when the user types in the filter field of the table. How do I invoke the querylistener without the user typing in the filter field? For example, an automatic filter without the user typing in the filter field of the table. In other words, a pre-filled filter field. When the table loads at run time the filter field is already filled with the letters "Sa" without user intervention.
    Edited by: John on Dec 28, 2011 10:24 PM
    Edited by: John on Dec 28, 2011 10:51 PM

  • How can I save zoom setting for a DOCUMENT so it opens at that setting?

    I find an optimal zoom setting for a document I'd like to use (say 42%) and want the document to open at that setting.  I save the document with File>Save Copy.  However when I open the document, it opens at the DEFAULT zoom setting set in the Preferences for program.  If I change the zoom level here to what I desire for that document, obviously all documents will open at that default setting.
    How can I save my desired zoom level for a document, which will most likely be different for EACH document, and have the saved document open at that setting?
    This seems like a trivial exercise / feature that should be easy to implement BOTH by the programmers of the software and the user setting the zoom level.
    Also, I want to suppress the bookmarks sidebar.  I save without the bookmarks but the documents opens with the side bar.  Can't THIS be set for each document?
    Why is it so difficult to tailor the viewing of a document to exactly what the viewer wants?

    OK.  Sorry for the mistake in posting the question here.
    Again it seems like it should be trivial to save a document in the Reader with a viewer's desired zoom setting.  I find this very helpful as I like to use a zoom setting that when scrolling down the document only one full page of the document is viewed (like turning the pages of a book).  Without this feature, partial pages are displayed when scrolling unless one experiments to find the correct zoom setting (often it is 60%).  One must do this every time one opens the same document, unless one remembers the zoom setting.
    Oh well ....

  • Presenter forces permanentely the file save dialog even for unchanged documents

    Presenter permanentely forces the "Do you want to save the changes ..." file save dialog to appear even for unchanged documents when I try to close it.
    To confirm the saving all times is not the solution because then I will loose the file's time/date stamp for the last real change.
    Not confirming the saving can be risky in case of any changes to the document which I am not aware anymore for that moment.
    Especially in case of having multiple documents open - this drives me really crazy.
    Deactivating the Adobe Presenter Add-in would solve the issue - so it is a problem related to Adobe Presenter (and not related to Powerpoint).
    I am using:
    Adobe Presenter 9.0.2
    Microsoft Office Professional Plus 2010
    Windows 7, 64 bit, Service Pack 1
    Thanks for your help
    Stefan

    The easiest way to solve the problem is to temporarily deactivate Adobe Presenter when you don't need it.
    In PowerPoint, go to File / Options / Add-Ins, select "COM Add-Ins" at the bottom of the window and click "Go".
    Then un-check the Adobe Presenter PowerPoint COM AddIn:
    You can easily reverse the process when you next need to use Presenter.

  • Presenter forces the file save dialog even for unchanged documents

    Presenter always forces the "Do you want to save the changes ..." file save dialog to appear even for unchanged documents.
    To confirm the saving all times is not the solution because then I will loose the file's time/date stamp for the last real change.
    Not confirming the saving can be risky in case of any changes to the document which I am not aware anymore for that moment.
    Especially in case of having multiple documents open - this drives me really crazy.
    Deactivating the Adobe Presenter Add-in would solve the issue - so it is a problem related to Adobe Presenter (and not related to Powerpoint).
    I am using:
    Adobe Presenter 9.0.2
    Microsoft Office Professional Plus 2010
    Windows 7, 64 bit, Service Pack 1
    Thanks for your help
    Stefan

    The easiest way to solve the problem is to temporarily deactivate Adobe Presenter when you don't need it.
    In PowerPoint, go to File / Options / Add-Ins, select "COM Add-Ins" at the bottom of the window and click "Go".
    Then un-check the Adobe Presenter PowerPoint COM AddIn:
    You can easily reverse the process when you next need to use Presenter.

  • Specify filter for every request except one

    Can a in me web.xml file specify that a filter should be used for every request except one.
    I can write;
    <filter-mapping>
         <filter-name>MyFilter</filter-name>     
         <url-pattern>/*</url-pattern>
    </filter-mapping>
    to use it on every request. But how do I exclude one specific resource that shouldn't go though the filter.
    I know that this may not be exactly the right forum but i'm really lost. I appreciate all suggestion.
    Thanks / Daniel

    This is the right forum, but unforutanetly you cannot exclude some urls.
    I would suggest you handle that logic in the filter itself.

  • Custom Filter for Date on UWL iview

    Hello Experts-
    I want to display previously approved tasks and current tasks in a UWL iview.
    As of now in the iview the taks which are displayed are the one which are pending.
    For this I am planning to add a custom filter to my UWL iview.
    Can anyone point me some documentation on this? Or Is there any other way to display previously approved tasks or timesheets?
    Please let me know.
    Any helpful repsonses are appreciated with points.
    -Raj.

    Hi Raj,
    I think its not possible to display previously approved tasks.
    If we take example for tasks like Leave Requests or Travel Requests ---
    When users raise the leave request it triggers the Work Flow in R3 and it goes to
    SAP Inbox of Manager (R3) for Approval.
    Now UWL fetches all the task those are in SAP Inbox , UWL does not stores it anywhere.
    Aa soon as tasks get approved it goes out of SAP Inbox.
    So its not possible to to show it  in UWL again.
    Same case with GP task , One the GP taks gets approved it will not come to UWL.
    Regardas,
    Piyush

  • LR Filters ADD custom filter for Focal Length

    I use a Leica M8 and in it's metadate there is a field for focal length of the lens but not the lens name/type and in LR filters there is a filter for Lens but not for focal length.
    Is there a way to add a custom entry in LR to filter images based on focal length?
    Found a way with smart collections.
    Thanks

    Care to share how you did this?

  • Please help! error -61399, how to create custom vi for every input in project explorer

    Please help! I have been trying whole night but couldn't get through it.
    I am creating custom vi to simulate cRIO inputs on development computer. ( FPGA target>>execute vi on>> development computer>>custom vi) I then follow tutorial creating test benches:
    Tutorial: Creating Test Benches (FPGA Module)
    but when I run fpga vi I get error -61399, input item/node is not supported (input item/node is my input which I've added from project explorer).
    The closest I got in my research on why this error is occuring- I have not connected all inputs/outputs in project explorer to custom vi. I followed tutorial exactly step by step but still I couldn't get through it.
    Please help! Please help!
    In order to do further investigation, I converted custom vi to a state machine , please find attachment. Having highlight execution on, it clearly demonstrates that input in cRIO are not being selected as a result default cases execute.
    Please find attached modified custom vi with state machine, fpga vi, and original custom vi.
    Best regards 
    Ta
    Attachments:
    custom vi.vi ‏32 KB
    inverter.vi ‏16 KB
    original custom vi.vi ‏22 KB

    Solution:
    You will see this error if no Custom VI has been selected or the Custom VI has not been configured for every I/O item that you are using in your FPGA code???
    I think that's exactly where I'm stuck!
    How do I configure it for inputs??? My attachement show that I have done everything being asked in tutorial!
    Thanks!

  • Is it possible to create a customs declaration for the document which is cleraed from customs

    Hi Experts,
    I want to generate a custom declaration for the declaration which is cleared from customs.
    Is there any function module for this requirement.
    Please post your suggestions ASAP.
    Thanks
    Srinivas

    hi Srinivas,
    It’s not possible to create a new declaration for a declaration that is
    already accepted by customs. There could be below 2 possible options
    1. U need inbound cancellation messages in the respective activity sequence,
    and then u can request customs by mail or phone to send the cancellation
    message. Once the cancellation message is received document gets cancelled and
    u can create new declaration
    2. U need a new optional activity sequence that will have outbound
    cancellation message. once u trigger the cancellation message, customs will
    reply back with the cancellation confirmation message and u can create a new
    declaration
    Hope this helps...
    Regards,
    Santosh

  • Customizing settings for parked document for edit lock while in workflow

    Hi all,
    I want to lock a parked document from edit while in workflow, I have seen in my previous project that if any document in workflow if try to change it used to give a message that 'document in wirkflow'. how to set this setting for parked documents using FIPP.
    Thanks

    Hi,
       Please read note 169732.
    It is normal that you get this errror message "Park document blocked xxxxxx" if you try to park a document for which "Release necessary" is set but "Released" flag is not set.
    Normally in workflow the "Released" flag is set in a background step right before the workflow posts the documents.
    regards
    Waman

  • Customizing setting for parked documents of edit lock which are in workflow

    Hi all,
    I want to lock a parked document from edit while in workflow, I have seen in my previous project that if any document in workflow if try to change it used to give a message that 'document in wirkflow'. how to set this setting for parked documents using FIPP.
    Thanks

    Hi,
       Please read note 169732.
    It is normal that you get this errror message "Park document blocked xxxxxx" if you try to park a document for which "Release necessary" is set but "Released" flag is not set.
    Normally in workflow the "Released" flag is set in a background step right before the workflow posts the documents.
    regards
    Waman

  • Custom processing for every Workflow event

    Hi,
    As soon as any workflow event is raised, I want to read
    data from my custom Z tables and do custom processing for that event.
    Thanks,
    Sudheer

    Hi Sudheer,
    You say <i>check if that event is in our custom table</i>. No need to reinvent the wheel, the event linkage fulfils exactly this function. If you want to perform an action for an event then add the event into the event linkage (tx. SWETYPV) instead of - or as well as - your custom table. It doesn't matter if you have the same action in there for 1, 50 or 100 events.
    You can have more than one linkage per event and you can start more than just workflow. The receiver function module is what 'receives' the event. It's just that: a FM to be executed when an event happens. This is the event manager's job, which is what you're trying to duplicate as I understand it. The receiver can either be a workflow or anything you choose - just follow the standard FM interface required here (have a look at any other linkage's FM for the parameters).
    All that aside, it sounds like somethng I'd do in a workflow. Either as two extra steps in the beginning of my workflow or as a second workflow. (Background step to log data and a sendmail step to notify users).
    Cheers
    Mike

  • TextEdit produces two files for every document I save

    Each time I save a document in TextEdit, two documents are created. One is the regularly named document and the other is the regularly named document with a tilde (~) in front of it. For example, if I save a document as "hello", the Finder shows two documents like this:
    hello
    ~hello
    Why is this happening? and how do I fix it?

    That is the automatic backup file. To prevent that behavior go into the prefs and in the Open and Save tab check 'Delete the automatic backup file.'
    That should stop that file from being created.

  • HP Officejet Pro 8500 Wireless makes me set printer settings for EVERY document.

    Ever since updating to Mavericks I have to tell the printer EVERY, SINGLE TIME I print, what to do...ie what paper size to use.  I have the correct setting in Settings/Preferences and the drivers are up to date.
    What's up with this??  Anyone having the same problem or have a solution.  This is getting old having to jump hoops just to print a document! 
    Thanks!

    In the Print dialog, select Show Presets from the Presets menu. In the sheet that drops down, uncheck the box marked
    Reset Presets Menu to "Default Settings" After Printing
    Click OK. Then select Last Used Settings or a custom preset that you created from the menu.

Maybe you are looking for