Specify filter for every request except one

Can a in me web.xml file specify that a filter should be used for every request except one.
I can write;
<filter-mapping>
<filter-name>MyFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
to use it on every request. But how do I exclude one specific resource that shouldn't go though the filter.
I know that this may not be exactly the right forum but i'm really lost. I appreciate all suggestion.
Thanks / Daniel

This is the right forum, but unforutanetly you cannot exclude some urls.
I would suggest you handle that logic in the filter itself.

Similar Messages

WRT110 works for every website except ONE after login, help please

I have a WRT110 version 1.0
It works for every website, except one. And it works for that one website just fine, until I login. When I enter my username/password it accepts it then redirects me to the companies landing page. I can see that because the URL loading changes and it shows the Title in the page which indicates it connected, but then it just sits there 'loading', in the status bar I see the message: "Waiting for tools.domain.com... to load" or something like that. and it takes like 5 to 10 minutes, no joke, then it loads.
If I connect my computer directly to the modem and bypass the router, then it loads just fine, very fast like everything else.
But then when I re-connect my router and refresh the page, it does it again, takes forever, but I can instanly see the title of the page in the title bar.
It works on every computer that I connect trough the mobile hotspot on my 4G verizon phone. but if it is through the router, every computer takes 5 to 10 minutes. Literrally.
Anyone have this happen to them? If so, how did you fix it?
Thanks,
Richard

Try the following settings:
# Open up the browser on the desktop and on the address bar type 192.168.1.1 that will open up the Router setup page…
# Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
# Then click on Security tab disable SPI Firewall Protection, uncheck Filter Anonymous Internet Requests...
Now check the connectivity status.

Client handler is invoking for every request.

Hi EveryOne
i am new to JAXWS welogic.
i have a web consumer/client, while sending the request from client the handler is invoking for every request. I could not able to restrict.
i would like to intialize only once and need to use that instance like (init() method initialization). How to resolve this issue.
can anyone come across a solution for JAX-WS in general? Please throw your thoughts here.
Any help in this regard would be appreciated.
Thanks & Regards
Suresh

Two common reasons for this are:
(1) Problem with the system clock: date, time, or time zone differs substantially from the rest of the internet
(2) Firefox not set up to work with your security software that filters your web traffic
In order to filter secure traffic, your security software needs to present "fake" certificates to Firefox so it can be the "man in the middle" and see everything sent to and from the site. Firefox distrusts the fake certificates until instructed otherwise.
Do you use any software with that kind of feature? On Windows, products with that feature include avast! 2015, Bitdefender, ESET, and Kaspersky.
A less common problem is malware performing a "man in the middle" attack.

How to create an default profile for every user on one machine? Deployment of configurations?

On firefox 3.5.X i can copy an configured profile from an user-folder to the programm folder of firefox. \mozilla firefox\defaults\profiles.
After an new user log in to the machine the default profile will get the actual profile of the new user. With all bookmarks, configurations and so on.
But this doesn't work with the firefox 3.6.10? What changed? What will be the way i can get an default configuration for every user on one machine? I want to deploy the firefox with an default configuration in our enterprise? Why does the behaviour change?
What to do?
Thanks...

No - there are no missing data, because nothing will be copied. The profile - folder does not work.
There are the standard first start behavior.
There might be another trick? Hint? Todo?
Thanks.

Alternatives to loading .properties files for every request

I am just starting for a company, and they loading a bunch of .properties files for every request. I've told them that according to JEE specs, using the file system like that is a violation, as it's not scalable. I've suggested the following alternatives:
1. Load a file once, in a static initializer, or something to that effect. Re-start the app if a change needs to be made in properties.
+: few changes
-: requires a new war/ear to make a change
2. Put properties that are truly variable in a database record.
-: requires DB schema change.
3. For instance, i've though about using something like jconsole to change an mbean property, and then web apps using that property.
4. Define a single web app that exposes an EJB/JMS/RMI object which serves properties to other web apps. If a change is needed, only 1 web app needs to be re-started, although it would still have to be re-packaged. Perhaps this app could load this stuff from the DB.
5. Have a properties service, and expose it as an RMI object. If a change needs to be made on the fly, use rmi to make the updates.
I'm leaning towards a combination of 1, 5, and possibly 4.
I would like to know what other alternatives might be available.
Thanks.

I am just starting for a company, and they loading a
bunch of .properties files for every request. I've
told them that according to JEE specs, using the file
system like that is a violation, as it's not
scalable. well, it's just boneheaded that's all
I've suggested the following alternatives:
1. Load a file once, in a static initializer, or
something to that effect. Re-start the app if a
change needs to be made in properties.that's what most people do
2. Put properties that are truly variable in a
database record.well, databases don't normally hold config info, but you can do what you want
-: requires DB schema change.
3. For instance, i've though about using something
like jconsole to change an mbean property, and then
web apps using that property.
4. Define a single web app that exposes an
EJB/JMS/RMI object which serves properties to other
web apps. If a change is needed, only 1 web app needs
to be re-started, although it would still have to be
re-packaged. Perhaps this app could load this stuff
from the DB.doing EJB or RMI for getting properties sounds like overkill in the extreme to me

TS5181 my iphone 5 says the station is unavailable for every station except itunes music festival, how do I fix this?

i've updated the software and when I try to use itunes radio I keep getting the message that this station is unavailable for every station except itunes music festival. how can I resolve this?

See turingtest2's user tip Empty/corrupt iTunes library after upgrade/crash

Is lookup required for every request(SLSB)?

Hi,
I have a SLSB and a client that makes frequent requests as needed. The question is, should the client make a fresh lookup for every request in a session or just once per session?
I have tried both the ways and got it to work...but can someone tell me the correct approach for lookup?
thanks in advance.

Thanks for the reply!
By your statment that EJB Home Handle can be cached, I understand the following..
MyBeanRemote mybean = null; // declaring as class variable.
// making a request
if(mybean==null)
lookupBean();
mybean.doSomething();
// making next request
if(mybean==null)
lookupBean();
mybean.doSomethingMore();
// here goes the lookup...
lookupbean() {
mybean = ...lookup("......");
}so, this is how before each request, I check if the mybean is null. in lookupBean(), the bean-lookup process is executed and reference is set to mybean.
am I right?

New instance for every request to Servlet

I want to create new instance for every request to Servlet ...
I am running my servlet on weblogic

Hi!
what functionality can there be that has to be put into init()?
Another idea:
why not include your needed functions in a private method within the servlet and call this method from init() and from doPost/doGet so it is processed any time the servlet is called?
btw: more instances of the same servlet seems to me as going back to the roots (cgi).
Thomas.

Servlet 2.3 - Filters for every request to the WebContainer

I want to filter every request to the web container. How do I deploy the filter without confining it to a particular context? For example, I would want to filter everything that went to www.bea.com. But if I deploy it as a webapp, it will only filter from www.bea.com/mywebapp. So I lose any request that go to www.bea.com/anothercontext. I have tried mapping the filter to the FileServlet, but once again, it only works inside of the context of the webapp.
          Is there a way to map the Filter to the docroot of the server?
          I am using Weblogic 6.1 and am currently deploying every thing as a .war file


yep - thats my understanding
          I dont know of a way to deploy a single filter at the server level that
          covers all webapps. I'm not saying there isnt a way - I don't know of one
          Anyone out there know for sure?
          "Chip Sands" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Please correct me if I am wrong, but that would mean that I would have to
          deploy
          > my filter into every webapp on the server because "/" is relative to the
          context.
          >
          > Unfortunately, that is not an option for me. I do not have knowledge of
          the other
          > webapps deployed on the server, but am required to have all requests to
          those
          > contexts go through my filter.
          > I was hoping there was a way to deploy a filter outside of a webapp and
          stick
          > it at the docroot of the server.
          >
          > Chip
          > "Matt Krevs" <[email protected]> wrote:
          > >I'm not sure you can do this
          > >
          > >The only way I can think of is to deploy your filter in all of your web
          > >apps
          > >and map it against the root context of each web app
          > >
          > >What happens if you deploy the filter within the default web app that
          > >has a
          > >context of "/" ?
          > >
          > >"Chip Sands" <[email protected]> wrote in message
          > >news:[email protected]...
          > >> I want to filter every request to the web container. How do I deploy
          > >the
          > >filter without confining it to a particular context? For example, I
          > >would
          > >want to filter everything that went to www.bea.com. But if I deploy
          > >it as a
          > >webapp, it will only filter from www.bea.com/mywebapp. So I lose any
          > >request that go to www.bea.com/anothercontext. I have tried mapping
          > >the
          > >filter to the FileServlet, but once again, it only works inside of the
          > >context of the webapp.
          > >> Is there a way to map the Filter to the docroot of the server?
          > >> I am using Weblogic 6.1 and am currently deploying every thing as a
          > >.war
          > >file
          > >
          > >
          >

How to diable delete button in PO for all users excepting one

Dear All
Please guide how to disable delete button in PO for all users excepting only one.
Thanks

Hi,
check following link
[Disable fields at item level in ME22N;
[Disable Delete Button;
Regards
Kailas Ugale

Session is set for every request

Hi,
With WL Server 6.1SP1 we have some peculiar problem. Every request
is considered as a new request and a new session object is created. So
the information we stored in the session is no longer available for
subsequent requests. This behaviour is seen intermittently. Session is
not invalidated and session is not timed out.
Thanks,
Prasad

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Setup write access for all descendants except one

Hi,
I'd like to give a write access to all descendants of a member, except one.
I thought I could simply give WRITE too all descendants, and set a NONE on the member I didn't want to give access.
That should work according to the Planning documentation :
Inheriting Access Permissions
Inheritance may determine the user or group’s access permissions. You can specify an attribute
that causes the children or descendants of that member to inherit its access permissions. Access
permissions assigned to members take precedence over inherited access permissions. You can
include or exclude the member from the access permissions setting.
However, after I set it up this way, the inherited WRITE takes precedence over the NONE set up on the member.
Am I facing a bug, or is there an error in the documentation, or am I really missing something ?
I am working with 11.1.2.1, EPMA application.
Thanks,
JM

If you set write accesss to descendants and then set none to one of the members then the none access should take precedence.
This statement should be true "Access permissions assigned to members take precedence over inherited access permissions."
Cheers
John
http://john-goodwin.blogspot.com/

Exclusion - For all customers, except one

Is there a simple way to create exclusion for ALL customers, except XXXXX?
There are approx 20,000 customers, across multiple Sales Orgs.
Would like to exclude 100+ products from 19,999 customers
Is there are way to set up products for only one customer to purchase?
Listing will not work.
Considering multiple levels of exclusion to get to the 1 customer, but searching for an easier method.
Thanks.

Hi Tom,
I think Listing will work.
What if you make a single material group for all 100+ products and create condition record in Listing for this material group and that particular customer ??
I think it should work.
Share your feedback
Sagar

Save custom filter for every document?

Hello,
sorry for my english ;)
In FW CS3 it was possible to save a custom filter and so this
filter was always shown in den filter list even when you open an
new document.
Now in FW CS4 you can only save a filter oder a style which
is addicted to the current document.
When you open a new one, you have to select every time your
saved filter or stile set.
This is no help and in my eyes a step back. I didn´t
found any solution to access my custom filter or stile set right
away when I open a new document.
It doesn´t help to save the workspace area and options
in a own set .. on every start, the stile window is empty and you
hav to select one.
Does sombody know a way to make a own set or stile selectable
(instant) to new documents?
Thank you for any hint.
Regards.
switch

8switch8 wrote:
> Hello,
>
> thank you all, but I get no success :( I don?t kno if
it?s my bad english
> knowledge or I have another FW4 build (which is
10.0.0.495).
>
> Here is another screenshot which try to explain my
problem.
>
http://img143.imageshack.us/img143/4458/nostylemi4.jpg
>
> I can?t set "meine" Style to default value so I get them
in every new document
> in the current and future FW sessions. It makes no
effect when I save my
> workspace, I have to select "meine" once again in every
document and every
> session.
>
> FW3 was a bit userfrendly in this case ;)
>
> Best regards.
>
> switch
>
Maybe this video will help:
www.newmediaservices.ca/jim_babbage/demos/styles/styles.html
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

Can visit every website except one? Very strange a...

This is a very strange problem, and one that has started today but is already driving me mad. I'm on BT Infinity Broadband, using a BT homehub, and have done for a while now... So far it's been fine until today.
Every aspect of my internet connection is fine - I can get and send emails, use skype, and view websites through every browser...But all of a sudden I can't visit one particular website anymore? It just times out every single time and wont let me on. It's definitely not the website becuase all my colleagues can go on there, and if i turn off my wifi on my iphone I can get to it on 3G also, so the problem is definitely in the router or something to do with my settings here. I've tried on my Macbook on Chrome, Safari and Firefox, and also on my Powermac on the same three browsers.
It's vital that I get back online becuase as luck would have it, my job is updating the blog on this one site I can't access, so any help from anyone at all would be very much appreciated. Here's the site in question: www.4downdistribution.com/v3
Cheers
James

it's unlikely that any settings have changed in the router - have you tried deleting the cache/history/temp internet files and see if that help
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Specify filter for every request except one

Similar Messages

Maybe you are looking for