Save Data with Reports

Hi Friends,
The Report Option has Save Data with Reports.
What is Merit and Demerit of having this option on?
Thanks and regards

If you select the report option save data with report - i think it will save the report along with the data retrieved at that particular time.
When open the report again it will show that data. The crystal reports will not search for new data, If click refresh then it will try to get the updated data. If you save the report with data, if publish the report in Infoview- open the report it will display the data without going for the dynamic data. If you schedule it then it will get the latest data from db server.
You can view the data in crystal reports viewer if you save the data along with the report.
sorry for my english!!
Regards,
Parsa.

Similar Messages

Problem with Save data with report

Post Author: ramprosoft
CA Forum: General
Hi,
I am new to CR and using Crystal Reports XI with SQL Server 2000.
I'm not able to remove the saved data in a report. I have played around different options, but unfortunately I'm not able to remove the data. I have checked variouse places in web above this issue not able to find a solution, so decided to open a new post. The problem is :
I have created a simple report and saved with-out data (1st version) the file size was 16KB. After few changes I have saved the same report with Data, the file size become 1065 KB. Its perfect and I can view the report in Report Viewer. Great Stuff!. Now the Testing completed, I would like to move this report to production environment, I notice that I'm unable to remove the data. I have played around various tricks like below, but it didnt work well.
Trick 1:
Uncheck: File->Options->Reporting (tab)->Save Data With Report.
Check: File -> Options -> Reporting (tab)->Discard Saved data on Open,
Uncheck: file-> Report Options -> Save Data With Report.
File -> Save Data with Report (Not selected)
Opened the report and try "save" and also tried "save as", still the size is 1065.
Trick 2:
I enabled all "Save Data with report" feature. Deleted all the rows in the table related to the query, previewed the report and Saved the report with "Save Data with report" featuer. But now, the funny part happen, the file size increased to 1070kb, instead of reducing. Worst Stuff!!!
Trick 3:
Updated the latest version of Patch and tried above tricks, still i'm not able to remove the data.
Appreciate, if you could help me to fix the problem.
thanks in advance

Post Author: salmanq
CA Forum: General
Hi, This
post is very informative, however I would like some specific information. If
someone can help me then please send me a private message. Best Regards,
Wholesale Pages UK Dropshippers
| Wholesale Suppliers
Australia Wholesalers and
Dropshippers | Dubai Property and Real Estate

No "save data with report"

Hi
I have a report with prompts... I saved the report with "_save data with report_". If i didnt do the "save data with report" ,every time I run the report ,its asking for selecting Prompts.
My question is
when i run the report , It should not ask for prompts and I need to fetch the latest data from the database but not the saved data .
Plz get me out of this situation.
Thank u

Hi Dans,
Purpose of parameters:
The purpose of creating prompts in the report is to filter the data as per user's requirement.Whenever you refresh the report it is going to ask for the parameter values as the crystal engine will fire the required query on the database and include the parameter values in the 'where' clause of this query.In the absence of filters report fetches all the records in the databse which can significantly impact the performance of this report.
Minimum requirement for getting refreshed data:
In order to fetch the refreshed data (and not the saved one) the query needs to be complete before executing and thus the where clause condition needs to be complete as well.
To solve your issue:
In your case,if you want to avoid being prompted then you may hard code the desired filters in the record selection formula(Report>>Selection formuls>>Record) say as in Order_id not in (,,,,,,,) and order_date>'' etc
Limitations:
However after hard coding the values you may loose the flexibility of choosing the filter values at runtime.
If you have any further queries please keep this thread updated.
Thanks

Save data with SubReport

How to save data with SubReport so I can view the report later without connecting to the data source?
Does the ReportDocument SaveAs(some name, true) Saves the data with SubReport?

Iu2019m sorry to tell that this solution is no longer valid for somehow!!! It was working, but suddenly it becomes not working.
What I did is I have installed Visual Studio 2010 and before releasing a new version of my solution, I checked the reports module. I found that again it is not working.
One client will save a report to the disk using this code:
CrystalDecisions.CrystalReports.Engine.ReportDocument rdc = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
            rdc.Load(ReportFileNamePath/, OpenReportMethod.OpenReportByTempCopy/);
rdc.ReportOptions.EnableSaveDataWithReport = true;
                        //rdc.ReportOptions.EnableSavePreviewPicture = true;
                        //rdc.ReportOptions.EnableSaveSummariesWithReport = true;
u2026 Set Parameters then the connection
CrystalDecisions.Shared.ReportPageRequestContext rprc = new CrystalDecisions.Shared.ReportPageRequestContext();
                        int nPages = rdc.FormatEngine.GetLastPageNumber(rprc);
rdc.SaveAs(cNewFileName, true);
rdc.Close();
rdc.Dispose();
// At this moment the report is saved and HasSavedData returns true
// The report will be sent to his manager by email.
In the other client:
CrystalDecisions.CrystalReports.Engine.ReportDocument rdc = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
rdc.Load(ReportFileNamePath/, OpenReportMethod.OpenReportByTempCopy/);
// At this moment the report HasSavedData returns false!!!
CrystalReportViewr1.ReportSource = rdc;
CrystalReportViewr1.Show();
// At this moment it will take some time then the parameters dialog appears.
// Then I tried to re-apply the parameter to the CrystartReoprtViewer1.ParameterFieldInfo or even to the rdc.ParameterFields but no luck.
Then I tried to set the connection to the ReportSource such as
crv.LogOnInfo.Add(logOn);
            CrystalDecisions.CrystalReports.Engine.Tables tables =
                ((CrystalDecisions.CrystalReports.Engine.ReportDocument)crv.ReportSource).Database.Tables;
            foreach (CrystalDecisions.CrystalReports.Engine.Table tbl in tables)
                TableLogOnInfo objTableLogOnInfo = new TableLogOnInfo();
                objTableLogOnInfo.ConnectionInfo = objConnectionInfo;
                tbl.ApplyLogOnInfo(objTableLogOnInfo);
But no luck again. It is only a try.
Please note that I did not change any report source or even my code.
My question is why the load does not load the saved data?
As usual, Iu2019m sorry for my bad English.
Edited by: Tariq Salah on Nov 29, 2010 7:01 PM

Save Data in Report to Use later

I have several names to report I need to combine data from several records of the same type with different codes. Not all names have the same codes. I want to report the data on one line. Is there a way to save date to be used later in the report?
For Example:
Name Code Start Date Code Transfer Date Code Promote Date
Sue
SD
01/15/2000
TD
01/15/2005
Mitch
SD
01/15/2004
Sam
SD
01/15/2003
PD
01/15/2006

Using the three records above I want the report to print (I'm using the Name Group Footer):
Name
Start Date
Transfer Date
Promote Date
Sue
01/15/2000
01/15/2005
Mitch
01/15/2004
Sam
01/15/2003
01/15/2006

Save data with more than 6 decimal places in SAP MDM 5.5

Hi there,
I need some help concerning saving data with about 20 decimal places (e.g. 0,00452961328622164) in MDM. I declared the datatyp "REAL", there are only 6 decimal places possible.
How can I save this Data? Maybe exponential function?
Please help.
Thank you
Thomas Pfab

currency takes you to 14 decimal places, if you want to have it as a little work around....you can always take out that symbol if it is annoying.(ohhh and decimal is multilingual too in currency, probably not a good hack!)
or without even knwoing what your requirement is? try normalizing the value, How many more decimal places can you hit?
One 100 1. "ten to the zero"
tenth 10-1 0.1 "ten to the minus one"
hundredth 10-2 0.01. "ten to the minus two"
thousandth 10-3 0.001. "ten to the minus three"
ten thousand 10-4 0.0001. "ten to the minus four"
hundred thousandth 10-5 0.00001. "ten to the minus five"
millionth 10-6 0.000001 "ten to the minus six"
ten millionth 10-7 0.0000001. "ten to the minus seven"
hundred millionth 10-8 0.00000001. "ten to the minus eight"
billionth 10-9 0.000000001. "ten to the minus nine"
ten billionth 10-10 0.0000000001. "ten to the minus ten"
hundred billionth 10-11 0.00000000001. "ten to the minus eleven"
trillionth 10-12 0.000000000001 "ten to the minus twelve"
ten trillionth 10-13 0.0000000000001. "ten to the minus thirteen"
hundred trillionth 10-14 0.00000000000001. "ten to the minus fourteen"
and put that field label indicating the 10th power. Like "Accuracy in 10 POW -9"
Just a wild guess.well thats how we usually show data in catalogues too!
(or)
separate the integer and decimal portions into two fields and store it in the repository.(split on ',')
-Sudhir.

Save data with EntityManager

Hi,
I would like to save data to a database with EntityManager. But not in the sun-appserv-samples (what the Netbeans uses). Is it possible to choose another database?
Thanks in advance any help.

First of all I would like to thank you for your replies. You're absolutely right. I don't understand every step I do. But I would like to understand.
In the first step I made an Enterprise Application Project. After that I made a JDBC Connection Pool on the part of the teszt-ejb / Server Resource. Here is the glassfish-resources.xml. Maybe it'll help.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE resources PUBLIC "-//GlassFish.org//DTD GlassFish Application Server 3.1 Resource Definitions//EN" "http://glassfish.org/dtds/glassfish-resources_1_5.dtd">
<resources>
<jdbc-connection-pool allow-non-component-callers="false" associate-with-thread="false" connection-creation-retry-attempts="0" connection-creation-retry-interval-in-seconds="10" connection-leak-reclaim="false" connection-leak-timeout-in-seconds="0" connection-validation-method="auto-commit" datasource-classname="oracle.jdbc.pool.OracleDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" lazy-connection-association="false" lazy-connection-enlistment="false" match-connections="false" max-connection-usage-count="0" max-pool-size="32" max-wait-time-in-millis="60000" name="connectionPool" non-transactional-connections="false" pool-resize-quantity="2" res-type="javax.sql.DataSource" statement-timeout-in-seconds="-1" steady-pool-size="8" validate-atmost-once-period-in-seconds="0" wrap-jdbc-objects="false">
 <property name="URL" value="jdbc:oracle:thin:@localhost:1521"/>
 <property name="User" value="admin"/>
 <property name="Password" value="admin"/>
</jdbc-connection-pool>
</resources>

Save date with precision (Hour, Minutes, seconds ) using V.O.

Hi all,
I'm using Jdeveloper 11g.
I have an Entity object with a column called 'createdOn' of type Date and an entity based View Object with the same type.
I'm trying to save today's Date with precision (day, month, year, hour, minutes, seconds) Using the view Object, but when I look in the Data Base, always appears the date without time.
Here is my code in the application Module to save the data, I've tried some things but nothing...
First I've tried using oracle.jbo.domain.Date, and I've tryed using Calendar as well. Nothing with
ViewObjectImpl voSample = getSamples1View1();
//Date creation for View Object
oracle.jbo.domain.Date today = new Date(Date.getCurrentDate());
//Calendar today = Calendar.getInstance();
//loop through the list of samples (TESTGROUPTYPES), and create the objects
while( it.hasNext())
Row rowSample = voSample.createRow();
SequenceImpl sequence = new SequenceImpl("SAMPLES_SEQ", voSample.getApplicationModule());
rowSample.setAttribute("SampleId", sequence.getSequenceNumber());
rowSample.setAttribute("CollectionId", stCollectionId);
rowSample.setAttribute("TestgroupType",it.next());
rowSample.setAttribute("UnitId",stUnitId);
rowSample.setAttribute("SampleStatus", "ORDERED");
rowSample.setAttribute("SampleBackup", "false");
rowSample.setAttribute("CreatedOn", today);
voSample.insertRow(rowSample);
voSample.getApplicationModule().getTransaction().commit();
Any help will be usefull,
thanks in advance
XAVI.

Hello John,
yes, I changed the date mask using
alter session set NLS_DATE_FORMAT='DD/MM/YYYY-hh24:mi:ss'
if i execute to_char(<date_column>, 'YY-MON-DD HH:MI:SS') on that column, the result is:
09-MAY-27 12:00:00
09-MAY-27 12:00:00
09-MAY-27 12:00:00
To launch the queries and see the results I'm using the JDeveloper's SQL WorkSheet.
I can update the data and time and the time persists in the DB
08-FEB-26 08:07:56
so, i think there's something in hte EO, VO or App Module method that I'm doing wrong...
The Entity Attribute is confirured:
name: CreatedOn
Type: Date
Value type: literal
Values checked: Persistent, Precision Rule and Queryable
database column: CREATED_ON, type: DATE
The View attribute is configured:
Name: CreatedOn
Type: Date
Value type: Literal
checked: Mapped to Column or SQL, Selected in query, queryable
query column: Alias: CREATED_ON, Type: DATE

Extract data with reports scripts

Hi, I try to extract data from a database with the following code.It seems that some information desapeared... Does it come from thecommands in the reports?{DECIMAL 3SUPMISSINGROWSSUPBRACKETSUPCOMMASTABDELIMITNOINDENTGENROWREPEATSUPFEED} <COLUMN (CURRENCY)<CHILDREN CURRENCY <ROW (YEAR, SCENARIOS,ENTITIES,PROJECT, MEASURES) FY06TOTAL_ACTUAL<CHILDREN ENTITIES <DIMBOTTOM PROJECT <UDA (MEASURES, "PL")! If it does not come from the code, are there some cases wherethe reports "ignore" members (shared, dynamic...)?I can not find a logic behind the data loss...

Oh, sorry, let me rewrite. ---- Hi, I recommend that you put "<SPARSE" command above "<COLUMN (CURRENCY)". It will improve its performance greatly. Takashi.

Save data and report in subfolder

Hi,
I spend one day trying to solve this "stupid" thing but now I raise my white flag.
Hope someone could show me the way.
In my script I want to organize the output result in such a way to have:
tdm files in "testdata" folder
pdf + xls in "testdata"\"document" folder
I'm able to create the testdata folder, but no idea how to create the subfolder.
The testdata folder should be a variable because it change test by test.
I've highlighted the error in my script.
dim myfold
myfold = inputbox("Inserire nome della prova", "diadem", DataSetName)
call foldercreate(DataReadPath & myfold)
call foldercreate(DataReadPath & myfold\"documents")
rem 'Save elaborated data
rem If (FileNameGet ("NAVIGATOR", "FileWrite", DataReadPath & DataSetName & myfold & "." & DataExtension) = "IDOk") Then
rem Else 'Dialog was canceled
rem Call MsgBoxDisp ("Data saving was canceled")
rem End If
Bye
Solved!
Go to Solution.

Giova
You were very close to have it work. Just some syntax issues.
The lines below will make the documents directory under /testdata/
dim myfold
myfold = inputbox("Inserire nome della prova", "diadem", DataSetName)
callfoldercreate(DataReadPath & myfold)
callfoldercreate(DataReadPath & myfold&"\documents")
You mentioned that PDF and Excel were the next files to create. I have done both.
Here is some helpful PDF making code for report output.
dim ofso
Set ofso = CreateObject("Scripting.FileSystemObject")
'ReportPrintTransparency = 1 ' needed to display transparency colors
REPORTPrintAsGraphic = 0' needed to display transparency colors
PDFResolution = "600 DPI"
PDFOptimization = true
iffilex(gsPDFFileFullPath) then
ofso.DeleteFile(gsPDFFileFullPath)
endif
CallPicPDFExport(gsPDFFileFullPath)
Paul

Save DAT with userdefined property in DIAdem

Hi,
I am working with DIAdem 9.1. Using
DataFileLoad(...)
GroupPropCreate(...)
GroupPropSet(...)
we load a data-file and store some information of the file in new properties. This works, we see the new properties and correct values in DataNavigator.
Afterwards, we want to save the datafile together with the new properties using
Call DataFileSaveSel(FileDlgFile+FileDlgExt, "DD8x", "'[1]/[1]' - '[1]/[" & GroupChnCount(1) & "]'")
However, the new properties are not saved. When we open the file again, the properties dont exist.
Can anybody help, please?
Thanks
Thi

Hello Thi,
properties are a new feature from the DIAdem 9 dataset-format (files with the extention .TDM). With the option "DD8x" you store the data in the old dataformat DAT (until verstion 8 of DIAdem). The properties can not be stored in this format.
Change the format into TDM or use the old way to store comments.
In the DAT-file-format you can store 100 comments (couples of name + value):
dataSetCommentN(i)
dataSetComment(i)
with i in 1..100.
A. Weiland
Andreas Weiland
Projektingenieur
measX GmbH & Co. KG, www.measX.com

Diadem Does not save data to neither portal nor file

I tried to acquire data from DAQ USB-6289 and save data to portal or file in DIADem DAC, but failed to get any data in portal, and no file was created, and no error was promptEd. But when I open a example file with saving function, it works fine. I'm sure there isn't any problem about the script since it is a very simple one. Do you have any suggestions?
Thanks a lot.
Jing

Hi Jing -
Since you said you're building your scheme based off of an example, I'm going to assume you've already included a Save Data or Save Data with Trigger block in your DAC scheme. This is mandatory if you want to use Data Storage with either of the two following techniques.
If you're running your DAC scheme programmatically, are you using the SchemeMeasTest() command, or the SchemeMeasStart() command? If you want your DAC scheme to be run with Data Storage (Data Portal or File) enabled, you'll need to use the SchemeMeasStart() command. The other command merely runs the scheme with visualization only (as a test).
If you're running your DAC scheme interactively, are you pressing the Start Display button or the Start Measurement button (see below)? These two buttons are the interactive versions of the aforementioned programmatic commands. If you want to test your visualization without Data Storage, use the Start Display button. If you want data to be saved to either the Data Portal or File, use the Start Measurement button.
Let me know if this still doesn't help.
Derrick S.
Product Manager
NI DIAdem
National Instruments

Error: Unparseable date with OracleXMLSave

Hi,
Error:
oracle.xml.sql.OracleXMLSQLException: java.text.ParseException: Unparseable date: "03/18/2099"
int oracle.xml.sql.dml.OracleXMLSave.insertXML(org.w3c.dom.Document)
void b2b.RcvQueueListener.saveCsmToTso(oracle.xml.parser.v2.XMLDocument)
void b2b.RcvQueueListener.<init>()
void b2b.RcvQueueListener.main(java.lang.String[])
I've tried to save a row in the database with OracleXMLSave:
I use JDeveloper 3.1.1.2 with XDK 2.? and a local Oracle 8.1.6 unde NT.
// XML Doc:
<ROWSET>
<ROW NUM="1">
<CSM_NO>A29912</CSM_NO>
<CRE_DAY_CSM>03/18/2099</CRE_DAY_CSM>
<CSM_VOL_GRO_FRZ>59.89</CSM_VOL_GRO_FRZ>
</ROW>
</ROWSET>
// Set java enviroment:
Locale.setDefault(java.util.Locale.US);
// Save Data with XSU like:
OracleXMLSave sav =
new OracleXMLSave(cn.getConnection(), "consignment_t");
sav.insertXML(csmData);
Same Error when trying to...
(1) set date format for OracleXMLSave:
> sav.setDateFormat("DD/MM/YYYYY");
(2) set database parameter:
> nls_date_format='DD/MM/YYYY';
> nls_language='AMERICAN';
(3) set registry (winnt)
> nls_lang=AMERICAN_AMERICA.WEISO8859P1
Help would be appreciated.
Thanks in advance!
Matthias.

setDateFormat() is expecting a format mask that is valid for the java.text.SimpleDateFormat object.
So, just do:
setDateFormat("d/M/yyyy");
null

Save Data in ALV Report .

Hello,
Given below is my code
*& Report ZALV_TEST_SA *
REPORT ZALV_TEST_SA NO STANDARD PAGE HEADING.
*----------------------TYPE POOL OF ALV--------------------------------*
TYPE-POOLS: SLIS.
*----------------------DATABASE TABLES---------------------------------*
TABLES: ZFLIGHTM_SA, ZFLIGHT_AVAIL_SA.
*-------------DATA DECLARATION-----------------------------------------*
DATA: BEGIN OF ITAB OCCURS 0,
 ZFLIGHT_ID TYPE ZFLIGHT_ID,
 ZCITY_FROM TYPE ZCITY_FROM,
 ZCITY_TO TYPE ZCITY_TO,
 ZDEP_DATE TYPE DATS,
 ZTIME TYPE TIMS,
 ZPRICE TYPE ZPRICE,
 ZNUM_OF_PSNGRS(3) TYPE N,
 ZAVAIL_SEATS(3) TYPE N,
 END OF ITAB.
DATA: BEGIN OF ITABM OCCURS 0,
 MANDT TYPE MANDT,
 ZFLIGHT_ID TYPE ZFLIGHT_ID,
 ZCITY_FROM TYPE ZCITY_FROM,
 ZCITY_TO TYPE ZCITY_TO,
 ZTIME TYPE TIMS,
 ZPRICE TYPE ZPRICE,
 END OF ITABM.
DATA: BEGIN OF ITAB_AVAIL OCCURS 0,
 MANDT TYPE MANDT,
 ZFLIGHT_ID TYPE ZFLIGHT_ID,
 ZDEP_DATE TYPE DATS,
 ZNUM_OF_PSNGRS(3) TYPE N,
 ZAVAIL_SEATS(3) TYPE N,
 END OF ITAB_AVAIL.
DATA: WA_ITAB LIKE LINE OF ITAB,
 WA_ITABM LIKE LINE OF ITABM,
 WA_ITAB_AVAIL LIKE LINE OF ITAB_AVAIL.
DATA: L_REPID LIKE SY-REPID,
 L_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 L_LAYOUT TYPE SLIS_LAYOUT_ALV,
 L_EVENTS TYPE SLIS_T_EVENT.
DATA: WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
*----------------SELECTION SCREEN SELECT-OPTIONS-----------------------*
SELECT-OPTIONS S_CITY FOR ZFLIGHTM_SA-ZCITY_FROM NO INTERVALS.
SELECT-OPTIONS D_CITY FOR ZFLIGHTM_SA-ZCITY_TO NO INTERVALS.
SELECT-OPTIONS D_DATE FOR ZFLIGHT_AVAIL_SA-ZDEP_DATE NO INTERVALS.
*----------------------SELECTION OF DATA-------------------------------*
PERFORM SELECT_DATA.
*----------------SETTING DATA IN TABLE FOR FIELD CATALOG---------------*
PERFORM CALL_FIELDCAT_MERGE.
*----------CALLING FUNCTION FOR DISPLAYING REPORT----------------------*
PERFORM DISPLAY_TABLE.
*----------------------AT SELECTION SCREEN EVENT-----------------------*
AT USER-COMMAND.
CASE sy-ucomm.
 WHEN 'STORE'.
 PERFORM SAVE_DATA.
 WHEN 'PREVIOUS'.
 LEAVE TO SCREEN 0.
 WHEN OTHERS.
ENDCASE.
*------------------------------FORMS-----------------------------------*
*& Form SELECT_DATA
* text
* --> p1 text
* <-- p2 text
FORM SELECT_DATA .
SELECT A~ZFLIGHT_ID ZCITY_FROM
 ZCITY_TO ZDEP_DATE
 ZTIME ZPRICE
 ZNUM_OF_PSNGRS ZAVAIL_SEATS
 FROM ZFLIGHTM_SA AS A INNER JOIN ZFLIGHT_AVAIL_SA AS B
 ON A~ZFLIGHT_ID = B~ZFLIGHT_ID
 INTO CORRESPONDING FIELDS OF TABLE ITAB
 WHERE A~ZCITY_FROM IN S_CITY
 AND A~ZCITY_TO IN D_CITY
 AND B~ZDEP_DATE IN D_DATE.
L_REPID = SY-REPID.
ENDFORM. " SELECT_DATA
*& Form CALL_FIELDCAT_MERGE
* text
* --> p1 text
* <-- p2 text
FORM CALL_FIELDCAT_MERGE .
* CLEAR WA_FIELDCAT.
* WA_FIELDCAT-TABNAME = ITAB.
* WA_FIELDCAT-FIELDNAME = 'ZFLIGHT_ID'.
* WA_FIELDCAT-KEY = 'X'. "sets key field
* APPEND WA_FIELDCAT TO L_FIELDCAT.
* WA_FIELDCAT-TABNAME = ITAB.
* WA_FIELDCAT-FIELDNAME = 'ZPRICE'.
* WA_FIELDCAT-KEY = 'X'. "sets key field
* APPEND WA_FIELDCAT TO L_FIELDCAT.
* WA_FIELDCAT-TABNAME = ITAB.
* WA_FIELDCAT-FIELDNAME = 'ZAVAIL_SEATS'.
* WA_FIELDCAT-KEY = 'X'. "sets key field
* APPEND WA_FIELDCAT TO L_FIELDCAT.
*--------------CALLING FUNCTION FOR FIELD CATALOG----------------------*
CLEAR L_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
 I_PROGRAM_NAME = L_REPID
 I_INTERNAL_TABNAME = 'ITAB'
* I_STRUCTURE_NAME = 'WA_ITAB'
* I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = 'ZALV_TEST_SA'
 I_BYPASSING_BUFFER = 'X'
* I_BUFFER_ACTIVE =
 CHANGING
 CT_FIELDCAT = L_FIELDCAT
* EXCEPTIONS
* INCONSISTENT_INTERFACE = 1
* PROGRAM_ERROR = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--------------EDITING FIELDS IN FIELD CATALOG ------------------------*
LOOP AT L_FIELDCAT INTO WA_FIELDCAT.
 CASE WA_FIELDCAT-FIELDNAME.
 WHEN 'ZFLIGHT_ID'.
 WA_FIELDCAT-COL_POS = '1'.
* WA_FIELDCAT-text_fieldname = 'Flight ID'.
 WA_FIELDCAT-KEY = '3'.
 WA_FIELDCAT-JUST = 'L'.
 WA_FIELDCAT-NO_ZERO = 'X'.
 WA_FIELDCAT-EMPHASIZE = 'X'.
 WA_FIELDCAT-SELTEXT_L = 'Flight ID'. "40 char long field name
 WA_FIELDCAT-SELTEXT_M = 'Flight ID'. "20 char long field name
 WA_FIELDCAT-SELTEXT_S = 'Flight ID'. "10 char long field name
 WHEN 'ZCITY_FROM' .
 WA_FIELDCAT-NO_OUT = 'X'.
 WHEN 'ZCITY_TO' .
 WA_FIELDCAT-NO_OUT = 'X'.
 WHEN 'ZDEP_DATE' .
 WA_FIELDCAT-NO_OUT = 'X'.
 WHEN 'ZTIME' .
 WA_FIELDCAT-NO_OUT = 'X'.
 WHEN 'ZPRICE' .
 WA_FIELDCAT-COL_POS = '2'.
* WA_FIELDCAT-text_fieldname = 'Flight ID'.
 WA_FIELDCAT-KEY = '4'.
 WA_FIELDCAT-JUST = 'L'.
 WA_FIELDCAT-NO_ZERO = 'X'.
* WA_FIELDCAT-EMPHASIze = 'X'.
 WA_FIELDCAT-SELTEXT_L = 'Price'. "40 char long field name
 WA_FIELDCAT-SELTEXT_M = 'Price'. "20 char long field name
 WA_FIELDCAT-SELTEXT_S = 'Price'. "10 char long field name
 WA_FIELDCAT-EDIT = 'X'.
 WHEN 'ZNUM_OF_PSNGRS' .
 WA_FIELDCAT-NO_OUT = 'X'.
 WHEN 'ZAVAIL_SEATS' .
 WA_FIELDCAT-COL_POS = '3'.
* WA_FIELDCAT-text_fieldname = 'Flight ID'.
 WA_FIELDCAT-KEY = '4'.
 WA_FIELDCAT-JUST = 'L'.
 WA_FIELDCAT-NO_ZERO = 'X'.
* WA_FIELDCAT-EMPHASIze = 'X'.
 WA_FIELDCAT-SELTEXT_L = 'Available Seats'.
 "40 char long field
 WA_FIELDCAT-SELTEXT_M = 'Available Seats'.
 "20 char long field
 WA_FIELDCAT-SELTEXT_S = 'Seats'. "10 char long field name
 WA_FIELDCAT-EDIT = 'X'.
 WHEN OTHERS.
 WA_FIELDCAT-NO_OUT = 'X'.
 ENDCASE.
MODIFY L_FIELDCAT FROM WA_FIELDCAT.
ENDLOOP.
ENDFORM. " CALL_FIELDCAT_MERGE
*& Form USER_COMMAND_ALV_SA
* text
* --> p1 text
* <-- p2 text
FORM USER_COMMAND_ALV_SA USING I_UCOMM LIKE SY-UCOMM
 IS_SELFIELD TYPE SLIS_SELFIELD.
*****form frm_usercommand using r_ucomm like sy-ucomm
*****rs_selfield type slis_selfield.
****CASE I_UCOMM.
CASE sy-ucomm.
 WHEN 'STORE'.
 PERFORM SAVE_DATA ON COMMIT.
 WHEN 'PREVIOUS'.
 LEAVE TO SCREEN 0.
 WHEN OTHERS.
ENDCASE.
ENDFORM. "USER_COMMAND_ALV_SA
*& Form DISPLAY_TABLE
* text
* --> p1 text
* <-- p2 text
FORM DISPLAY_TABLE .
* L_FIELDCAT-input = 'X'.
* L_FIELDCAT-edit = 'X'.
* L_LAYOUT-Edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = L_REPID " report id
I_CALLBACK_PF_STATUS_SET = 'ZALV_TEST_SA' " to set pf-status
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_ALV_SA' " to handle
 " user command
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME = ''
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT = L_LAYOUT
IT_FIELDCAT = L_FIELDCAT " for field catalog
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
IT_EVENTS = L_EVENTS "internal table with
 " user events
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* I_HTML_HEIGHT_TOP =
* I_HTML_HEIGHT_END =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = ITAB "internal table with
 " records
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
********* IF SY-SUBRC <> 0.
********** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
********** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
********* ENDIF.
ENDFORM. " DISPLAY_TABLE
*-------------------------SET PF-STATUS--------------------------------*
*& Form ZALV_TEST_SA
* text
* --> p1 text
* <-- p2 text
FORM ZALV_TEST_SA USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ZALV_TEST_SA' .
ENDFORM. "ZALV_TEST_SA
*& Form SAVE_DATA
* text
* --> p1 text
* <-- p2 text
FORM SAVE_DATA.
LOOP AT ITAB INTO WA_ITAB.
****HIDE:WA_ITAB-ZFLIGHT_ID, WA_ITAB-ZCITY_FROM,
****WA_ITAB-ZCITY_TO, WA_ITAB-ZTIME,
****WA_ITAB-ZDEP_DATE, WA_ITAB-ZNUM_OF_PSNGRS,
****WA_ITAB-ZAVAIL_SEATS.
 CLEAR: WA_ITABM,WA_ITAB_AVAIL.
 WA_ITABM-ZFLIGHT_ID = WA_ITAB-ZFLIGHT_ID.
 WA_ITABM-ZCITY_FROM = WA_ITAB-ZCITY_FROM.
 WA_ITABM-ZCITY_TO = WA_ITAB-ZCITY_TO.
 WA_ITABM-ZTIME = WA_ITAB-ZTIME.
 WA_ITABM-ZPRICE = WA_ITAB-ZPRICE.
 WA_ITAB_AVAIL-ZDEP_DATE = WA_ITAB-ZDEP_DATE.
 WA_ITAB_AVAIL-ZNUM_OF_PSNGRS = WA_ITAB-ZNUM_OF_PSNGRS.
 WA_ITAB_AVAIL-ZAVAIL_SEATS = WA_ITAB-ZAVAIL_SEATS.
 APPEND WA_ITABM TO ITABM.
 APPEND WA_ITAB_AVAIL TO ITAB_AVAIL.
ENDLOOP.
MODIFY ZFLIGHTM_SA FROM TABLE ITABM.
MODIFY ZFLIGHT_AVAIL_SA FROM TABLE ITAB_AVAIL.
COMMIT WORK.
ENDFORM. " SAVE_DATA
I want to edit a field--the price and save the changes. I have assigned a button STORE for this. But my data is not getting saved.
I searched the forum and wrote the code accordingly. I even referred the stored programs. Still I am not getting the output. Please help.
Regards,
Smruthi.
Edited by: Smruthi Acharya on Feb 10, 2009 3:31 PM
Edited by: Julius Bussche on Feb 10, 2009 12:16 PM
Please use code tags

Hi,
You must have taken some function code for that STORE button (say you have taken it as MODIFY )
Use this code, it will modify the code in internal table from alv.
I have tried it, n its working:-
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
 i_callback_program = v_rep_id " report id
 i_callback_pf_status_set = 'PF' " for PF-STATUS
 i_callback_user_command = 'USER_COMMAND' " for User-Command
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
 is_layout = wa_layout " for layout
 it_fieldcat = it_field " field catalog
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
 it_sort = it_sort " sort info
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* i_save = 'A'
* is_variant = wa_variant " variant name
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
 TABLES
 t_outtab = it_final " internal table
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form USER_COMMAND
* SUB-ROUTINE USER_COMMAND IS USED TO HANDLE THE USER ACTION
* AND EXECUTE THE APPROPIATE CODE
* -->LV_OKCODE used to capture the function code
* of the user-defined push-buttons
* -->L_SELFIELD text
FORM user_command USING lv_okcode LIKE sy-ucomm l_selfield TYPE slis_selfield.
* assign the function code to variable v_okcode
lv_okcode = sy-ucomm.
* handle the code execution based on the function code encountered
CASE lv_okcode.
* when the function code is MODIFY (STORE button) then save data
 WHEN 'MODIFY'.
* to reflect the data changed into internal table
 DATA : ref_grid TYPE REF TO cl_gui_alv_grid. "new
 IF ref_grid IS INITIAL.
 CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
 IMPORTING
 e_grid = ref_grid.
 ENDIF.
 IF NOT ref_grid IS INITIAL.
 CALL METHOD ref_grid->check_changed_data.
 ENDIF.
" at this point your data in internal table is changed
* refresh the ALV Grid output from internal table
 l_selfield-refresh = c_check.
ENDFORM. "USER_COMMAND
Hope this helps you.
Regards,
Tarun

No data found error on Form on a Table with report

Hi Everyone, I'm using Application Express 4.1.0.00.32 on Windows 7. I built a Form on a table with report. Earlier I was using rowid as a passing parameter but then I had to change it to primary key column from report to form.
So in the "Fetch row process" I changed the "Items containing primary key value" and "Primary Key column" to P1004_PERSON_ID and PERSON_ID respectively. Which is my primary key.
My Form is working exactly fine but at on point it throws "no data found error".
I have a required date field in the form. So if the user doesn't fill in the date field and try to save the form, it throws the "Feild required error" and then when user enters date and try to save then it throws the error "No data found.". here is the snapshot... snapshot
How can I fix this error.I'm really stuck.
I checked debubber..it is as follows... in debughger it's still showing rowid. I don't know why. How can I fix that.
Execution
Message
Level
Graph
0.00233
0.00932
S H O W: application="101" page="1004" workspace="" request="" session="123235901404364"
4
0.01161
0.00102
Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
4
0.01261
0.00046
alter session set nls_language="AMERICAN"
4
0.01307
0.00042
alter session set nls_territory="AMERICA"
4
0.01348
0.00053
NLS: CSV charset=WE8MSWIN1252
4
0.01401
0.00042
...NLS: Set Decimal separator="."
4
0.01443
0.00053
...NLS: Set NLS Group separator=","
4
0.01495
0.00050
...NLS: Set g_nls_date_format="DD-MON-RR"
4
0.01545
0.00051
...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"
4
0.01597
0.00050
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.01647
0.00079
...Setting session time_zone to -05:00
4
0.01726
0.00046
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.01772
0.00060
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.01832
0.00092
...NLS: Set g_nls_date_format="DD-MON-YYYY"
4
0.01924
0.00049
...NLS: Set g_nls_timestamp_format="DD-MON-YYYY HH24.MI.SSXFF"
4
0.01973
0.00083
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.02056
0.00099
NLS: Language=en-us
4
0.02154
0.00157
Application 101, Authentication: PLUGIN, Page Template: 5091946581246503
4
0.02312
0.00065
...fetch session state from database
4
0.02377
0.00106
fetch items
4
0.02483
0.00065
...fetched 103 session state items
4
0.02548
0.00194
Authentication check: NTLM (NATIVE_CUSTOM)
4
0.02742
0.00188
...Execute Statement: begin declare begin wwv_flow.g_boolean := f_ntlm_page_sentry_parm; end; end;
4
0.02930
0.00050
... sentry+verification success
4
0.02980
0.00042
...Session ID 123235901404364 can be used
4
0.03021
0.00114
...Application session: 123235901404364, user=VARMAN01
4
0.03135
0.00162
...Check for session expiration:
4
0.03297
0.00075
Session: Fetch session header information
4
0.03372
0.00113
...Setting session time_zone to -5:00
4
0.03485
0.00080
Branch point: Before Header
4
0.03565
0.00598
Fetch application meta data
4
0.04165
0.00081
...metadata, fetch computations
4
0.04245
0.00076
...metadata, fetch buttons
4
0.04321
0.00086
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.04406
0.00058
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.04464
0.00049

Just an observance... SQL is still showing the rowid instead of the P1004_PERSON_ID ??
where "PERSON_ID" = :p_rowid;
should it not be :
where "PERSON_ID" = :P1004_PERSON_ID:
thx, Bill

Save Data with Reports

Similar Messages

Maybe you are looking for