Save the angle of motion

Hi, i am new in programming. I have been assigned a task to program a kinect in C# for detecting angle of motion with indicator that show on the screen and save data. I have no idea how i can do it because I m weak in this.

Weak in choosing the correct forum as well! :-) This forum is for microsoft project, a project scheduling tool. I suggest you search for a more relevant forum.
Rod Gill
The one and only Project VBA Book
Rod Gill Project Management

Similar Messages

How can I save the modulation I apply to an instrument during recording such that it remains during playback?

How can I save the modulation I apply to an instrument during recording such that it remains during playback? For example, I apply modulation #8 during recording, but when I play the track back the modulation is not incorporated.

Hi Vlad,
Unfortunately, I don't think there is a way to programmatically read the voltage output to the drive, as the voltage is all determined internally by the controller circuitry on the board. Depending on the controller though, you may be able to physically route the output terminal to a spare analog input channel and read in the voltage that way. This example Analog Input with 73xx Motion Card shows you how to program LabVIEW to do this.

HAVE NEW 13.3 MAC AIR AND when using it to open sites in safari I have no issue until I go to a link page that is a pdf file or I am trying to save the screen info as a pdf. I only get a black screen with no data, cannot find solution in help menu

HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
when i open sites in safari the page opens fine if it is not a pdf based page.
Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)

If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.

How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive w

How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.

If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files.

Is it wise to keep the Nikon camera files "DSC's" after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera'

Is it wise to keep the Nikon camera files "DSC's" after downloading them and converting to DNG files via Adobe converter for lightroom use. In other words do the DNG files have all the raw data I would ever need in processing or should I save the camera's DSC files?

DNG files do not contain some metadata supplied by the camera, which can be used by the manufacturer's software. Thus, if you don't keep the original Raw photo, you will lose this information.
If your 1000% sure you're never going to use the manufacturer's software, then this isn't a problem. But who can be sure what software you will be using 10 years from now?

Unable to save the ALV layout variant and display of selection screen on F4

Hi All,
The end user wants to directly select the layout variant (SLIS_VARI). I have used the following code to display the layout variant on selection screen. But, I am unable to save the variant on ALV. Whenever I am trying to select the layout variants (by doing F4 on selection screen) its displaying "No Layout found".
Following is the code for displaying layout variant:
PARAMETERS: p_var TYPE slis_vari.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var.
PERFORM f4_variant CHANGING p_var.
FORM f4_variant CHANGING c_variant TYPE slis_vari.
DATA: ls_variant TYPE disvariant,
            l_exit     TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = ls_variant
      i_save     = 'A'
    IMPORTING
      e_exit     = l_exit
      es_variant = ls_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit EQ space.
      c_variant = ls_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_variant
and following is the code for displaying the ALV:
FORM edition_alv.
ws_variant2 = ls_variant.
* Call ALV editor in list mode
IF p_list = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        is_layout               = ws_layout
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
* Call ALV editor in grid mode
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
ENDIF.
ENDFORM.
I am not sure whats going wrong, but I am unable to save variants.
Please help.
Thanks,
Vishal.

The F4 will display you the existing layouts only. So you need to save the layout first & then execute the report again & check if you are getting F4 values for that field.
The Layout needs to get stored with variant.
Regards,
Mahesh

Unable to Save the Data Using BexSetData

Hi All,
I have a issue regarding saving plan data,
Design: I got a Workbook with several tabs, each tab has a input ready Query and has a layout as below
A formatted user facing worksheet containing; an area where the user enters their plan data with a BEx save data button, an input ready query and a worksheet containing the BExSetData formulas that reference the values entered on the user facing worksheet.
Issue: When i try to enter the value in the user facing sheet, the data is shown in the BexSet Data Sheet with out any problem,
But when i try to save the data the data is not saved into the cube.
Can any one please give some ideas of possible cause.
One more question is the input ready query doesn't have any references to other sheets, will this be a reason for the data not saved?
Please through some ideas.
Thanks
GC

Hello,
I think it is problem with the buffer:
Check the notes 1136163, 1138864, 1146957, 1179076.
please check the below;
Delta buffer query in RSRT for BI-IP ("<infoprovider>/!!1<infoprovider>)
Planning query donu2019t show the current data
Thanks.
With regards,
Anand Kumar

I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to

I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to CC and whenever I try to save something in indesign, I get a dialog box that says that my file is corrupt. How do I fix this? I cannot get any work done !!!

You should ask in Illustrator
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

I can't save the setting for dowloads to go to the specified folder (such as the desktop). It restores to default when I close Forefox.

I can't save the setting for downloads to go to the specified folder (such as the desktop). It works once but it restores to default next time I open Firefox.
== This happened ==
Every time Firefox opened

Make sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]

HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

When saving downloads is there a way to instruct Firefox to save the download to a different folder other than the default?

I downloaded a printer driver to Firefox's default downloads. I started the exe file and a window opened so I could install the driver. I selected run, and the window closed and nothing happened. I finally had to use MS IE in order to save the file to a different folder. I was then able to decompress the file and install it. Is there an option in Firefox to override the default downloads folder with a folder of my choosing? Running Win 7 Home Prem 64 bit, FF 5.0.1.

This is the same issue that has plagued me for years. I always thought that this was a Flash plugin issue, but it does occur on HTML5 as well. A friend of mine verified that this does not occur in Linux, but only on Windows. It would be great to have this fixed, as it's honestly the only thing that's making me use Chrome all the time, as I don't want to have multiple browsers open.

I Have a HP Photosmart Premium Fax all in one C309A,I can't save the scanned documents since upgrade to Max OSX10.9.2

I Have a printer HP Photosmart Premium Fax all in one C309A,I can't save the scanned documents since upgrade to Max OSX10.9.2

Did you install the latest drivers?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3 737195&

I installed 4.0 and cannot print anything. I uninstalled and installed 3.6 and cannot print anything. Everything has a .tif extension and wants me to save the file and I just want to print a selection from my email!

I have had nothing but grief since I upgraded to 4. It is hateful. I can't print anything. If I highlight something from a website or my email and tell the printer to just print the selection, it doesn't print. It wants me to save the the file and they all have a .tif extension and nothing will print. I have uninstalled 4 and gone back to 3.6 and the problem is still there. If I highlight the desired selection and copy it to Word 2003, it will print what I want, but I can't print anything from the browser itself. That is the only problem I'm aware of so far. I upgraded about a week ago at most, maybe less than that. I'm so sorry I did. Why can't I print anything? I don't want my selection to be a file, I just want it to print!

Thank you, but it didn't work. My printer stays on away, independently of the PC. I can print from Chrome and IE7 with no problem but not Firefox. The .tif extension refers to a tagged image something. I went looking around in the control panel and I found that Microsoft Office has it's own Access Snapshot Viewer. My company installed Office 2003 on my PC but I only use Word in my work. This snapshot viewer was listed in the control panel under Printers and Faxes. It was not the default anything but for some reason, Firefox 4 installation must have kicked it into gear. I've had the Office software for several months with not one problem. I have Firefox4 for less than a week and everything becomes difficult. I deleted the Office snapshot viewer (hope I don't get fired for it) so my little HP printer is the only one listed and now things seem to be working okay. I have FF 3.6 back up and running. I didn't lose any data and I hope the support and security updates stay available for a long time because it seems like there are plenty of people who aren't in love with FF4. Thank you so much anyway for your help.

I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)

I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)

Hi,
This feature is not available in Adobe Edge animate. You can not export as image from Edge animate.
Publish options available in edge describe here
Edge Animate Help | Publish your content
Regards,
Devendra

Save the angle of motion

Similar Messages

Maybe you are looking for