SaveAs Document Failed (80043768)

Can anyone explain why this error is occurring?
A user is trying to save a Deski doc to their favourites folder. According to BusinessObjects Notes, it says this error message is generated when the user has insufficient rights to the category. This particular doc in the repository is saved with the corporate category 'Planning' and when trying to save it to the favorites folder, the Planning corporate category remains ticked. However, other Webi documents in the same folder are also in this category and the user can save those to their favorites folder with the corporate category Planning ticked without any problem. So why can you use the category for Webi documents but not for Deski documents? Or isn't it as simple as that? Is there some other complication?

Hi Anne,
Try this:
1. In the CMC, click on BusinessObjects Enterprise Applications
2. Select Desktop Intelligence
3. Add the Users/Group
4. Click on Advanced and modify the following right for Desktop Intelligence:
- Save Desktop Intelligence Documents: "Explicitly Granted"
You may need to grant access on other rights if the issue persists.
Regards,
Jeff

Similar Messages

An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
Does anyone know what could cause this error message?
Thanks a lot for any hint.
Sergey

Hi Henry,
I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
Please let me know if this is unusual for this version.
Regards,
Arvind E

SaveAs Document Failed ... Deski document being saved to Favourites folder in Webi

Post Author: amcc
CA Forum: Administration
I have been unable to work out what access right is needed for Webi users to be able to save a Deski document to their Favourites folder. We have some migrated documents containing features that will not convert to Webi so have had to allow access to the Deski documents in the repository. Anyone in the Administrators group can successfully save the Deski documents but other users cannot and get the message:
SaveAs Document Failed (80043761)
The same group of users can view and refresh the document without any problem. They can also use 'Save to my computer as' without any problem.
For an example group of users they have:
1. View on Demand set on the universe2. View on Demand set on the universe connection3. View on Demand set on the folder containing the document4. Log on to Desktop Intelligence and view this object in the CMC set for the Desktop Intelligence application5. Save Desktop Intelligence Documents set for the Desktop Intelligence application6. Full Control of their Favourites folder.
I've even tried changing the View on Demand settings to Full Control but it made no difference.
What have I missed?

Hi all,
Even I have faced this problem,but the scenario is little different here.
I have a deski publication report , which run sucessfully evry day but once in a while fails giving this error.
SaveDocumentAs failed (80042908)
When we run this report again it run fine.
I am really wondered why this is happpening.
Any suggestions on this. Thanks in advance.

Porting from CS4 to CS5, save document failed.

I am porting programes from CS4 to CS5, and meet a problem.
In my program I need delete some page from a indesign document and then save it back.
I open the document use the code below
InterfacePtr<IK2ServiceRegistry>    serviceRegistry(Porting::GetPointerToSession(), UseDefaultIID());
        ASSERT(serviceRegistry);
        if (!serviceRegistry)
            break;
        InterfacePtr<IK2ServiceProvider> openManagerService(serviceRegistry->QueryDefaultServiceProvider(kOpenManagerService));
        ASSERT(openManagerService);
        if (!openManagerService)
            break;
        InterfacePtr<IOpenManager> openManager(openManagerService, IID_IOPENMANAGER); // no kDefaultIID
        ASSERT(openManager);
        if (!openManager)
            break;
        UniFile fileDocument = fTemplateCopyFile;
        UIDRef DocumentRef = openManager->OpenDocFromFile(&fileDocument,kFullUI);
and then delete some page
for( int i = 0; i < fnPageCountOfCopy; ++i )
            UID idPage = fvPageUID[i];
            if ( fPageIDList.DoesNotContain(idPage) )
                UIDRef refPageToDelete( fTemplateCopyUIDRef.GetDataBase(), idPage );
                InterfacePtr<ICommand> deleteCmd(CmdUtils::CreateCommand(kDeletePageCmdBoss ));
                if( deleteCmd )
                    UIDList tempList(refPageToDelete);
                    deleteCmd->SetItemList( tempList );
                    ErrorCode status = CmdHelper::ProcessCommand( deleteCmd );
then save it back
pOldHandler->SaveAs(fTemplateCopyUIDRef,
            &fTemplateCopyFile,
            K2::kSuppressUI,
            kFalse,
            kInDesignFileTypeInfoID);
but save failed. The code works on CS4, but does not work on CS5.
Does anybody know why? Any suggestion is appreciated.

I found that delete operation will affect save operation, but I don't know why and how to solve it.
Is it a threading problem?

When I convert a pdf file to word format, it show the error "Save As failed to process this document

Hi,
I have just upgrade the creative cloud CC version and upgrade the acrobat pro to XI version.
when I convert a pdf file to word format, it show the error "Save As failed to process this document. No file was created."
Actually, I have delete the image, use other pdf file and download a sample pdf file to test it. Same error is shown. I have try all the other format , like the excel, rtf, text, powerpoint, still same thing happen.
Please show me what else I can do to fix this problem.
Thx.
Alfred Li

alfredadli wrote:
Please show me what else I can do to fix this problem.
Fisrt step would be to ask in the proper forum.
http://forums.adobe.com/community/acrobat

When I convert a pdf to word file, it show error "Save As failed to process this document. No file "

Hi,
I have just upgrade the creative cloud CC version and upgrade the acrobat pro to XI version.
when I convert a pdf file to word format, it show the error "Save As failed to process this document. No file was created."
Actually, I have delete the image, use other pdf file and download a sample pdf file to test it. Same error is shown. I have try all the other format , like the excel, rtf, text, powerpoint, still same thing happen.
Please show me what else I can do to fix this problem.
Thx.
Alfred Li

alfredadli wrote:
Please show me what else I can do to fix this problem.
Fisrt step would be to ask in the proper forum.
http://forums.adobe.com/community/acrobat

Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created". What's the problem?

Set Adobe Acrobat XI Pro. When I want to save the file in WORD, EXCEL or esporta file into ... immediately throws an error "save as failed to process this document no file was created".
What's the problem?
Any help in finding a solution is greatly appreciated.
Thank you,

Installed AcrobatXI PRO 11.0.09 on seven computers and laptops. Two of them gives an error when you try to save a document in WORD, EXCEL, Power Point, or when exporting to... error: Save failed to process this document. No File was created.
But all good saves in the format of TXT and jpg.
I have uninstalled and restored and re-installed and updated and registry cleaned and removed using the special utility Cleaner Tool for Acrobat, but nothing helps.
On one notebook with Windows 8.1 and Microsoft office 2013, on another laptop with Windows 7 and Microsoft office 2010, the same problem, although there are computers with Windows 7 and Microsoft office 2010 and everything works.
Tell me where to find the problem and how to solve it.
Thank you.

Save as failed to process this document. No file was created.

I've had Adobe Acrobat XI installed on my computer since November of 2013 and had never had any problems with the 'Save As' function - I could save all kinds of PDFs to Word, Excel, Power Point -- whichever format I needed -- until yesterday. Now I am suddenly getting "Save as failed to process this document. No file was created."
I also have the exact same set up (Windows 8, 64, Adobe Acrobat XI) on my laptop and have no issues w/ the "Save As" feature. To make sure that it is just my desktop's Acrobat that is acting strange, I took the exact same document and was NOT ABLE to "Save As" on desktop -- and was, with no issues, able to "Save As" the exact same document to Word on my laptop.
The ability to "Save As" is a feature that I use often -- so, please, tell me how I can get that feature back. I've already tried the "Repair" feature in Acrobat - no luck.

Hi Bill,
Yes - I did the upgrade - which I was avoiding because last time I upgraded, the font and icons within Adobe Acrobat became microscopic -- so I did a 'system restore' and turned off my updates. I have old eyes & work with Adobe Acrobat all day -- so the tiny print is horrible.
So, now I can either NOT be able to see the fonts and have the ability to convert to Word/Excel, etc OR, I can revert and actually SEE the fonts - but not be able to convert the documents I need to convert. This sucks.
Adobe Acrobat XI upgrade (11.0.06 and .07) has really been a disappointment. I've done all the little tricks about trying to fix the size of the fonts - but, just like most of what I've read, I can either have HUGE fonts/menus, etc or make it 'readable' by changing the registry - but then end up w/ horrible little icons.
It's really sad to have to choose one or the other - I'm very disappointed in Adobe.
Thanks for your input!!

Save as failed to process. document not saved

Save as failed to process. document not saved. This is the error message i get when trying export pdf document to word. I only just upgraded window to 8 pro from windows 7.
Any suggestions?
Thanks

What version of Acrobat. That might be the problem.

"Save As failed to process this document. No file was created." Error trying to convert pdf to word document

Hi - I have a pdf created from indesign as a print quality pdf. The client now wanted to text in an editable format so they can reuse the content for a new years event.
I get an error message "Save As failed to process this document. No file was created."
Can anyone help out here? There are a lot of graphics in it and it is horizontal - could any of this be an issue?
Thanks
Nikola

Totally agree. Saving the pdf as a word file gives it the look of a word file, until corrections have to be made. The text flow will be, so to say, "strange". Reusing that file in Indesign ...
We always save as rtf, send that one back and relink it afterwards (as long as the styles stay the same, only smaller corrections have to be made.

" FAILED TO SAVE DOCUMENT" " NOT SUPPORTED"

I have a Crystal Report that I have worked on for serveral hours and that I have saved throughout the day; however, when I try to save it now, I get the following error:
" FAILED TO SAVE DOCUMENT" I hit OK and then the following appears.
" NOT SUPPORTED"
I am not able to save it anywhere or rename it.
Has this happened to anyone else?

Hello,
Typically when you get permission issue it's due to file system permissions, registry permissions or even WEB access. Open up Crystal Designer and check off the option for updates. Firewalls and anti-virus software can cause access issues also. This is not a CR issue but some permission problem and there can be many sources causing Cr to fail like this. Depending on the OS it can also be read/write permissions on the folder you are trying to save to.
Make sure you are a local PC administrator and have full rights to install software. If you have an IT department check with them to verify they have not pushed out Profile updates to modify your permissions, you may be an Administrator but IT may have altered the default permissions.
There are also install issues affected by DEP, Firewall and Anti-virus software, thus the warning about disabling all applications when installing. Quite often also doing a Repair install from Add/Remove programs will resolve issues, in your case Disconnect from the network by disabling your network card and then stop the firewall and and Anti-V then do a repair install.
Now test your report by saving it locally, do not save it to a network share and see if that works. If it does then start up your firewall and anti-V and then re-connect to your network and test again. If it now fails look at configuring those security suits to allow CR full access to the network, system resources and WEB.
Removed registry to clean up formatting:
Other tools are ProcessMonitor, add crw32.exe to the filter and then when you try to save the report watch the logs to see what Access Denied notes are logged. This should tell what you need to add to your system to get full access.
There are 1000's of users who do not have this problem and only a few who do so it's not likely a CR issue.
Thank you again
Don
Edited by: Don Williams on May 13, 2010 8:29 AM

Failed to save document.

Post Author: Nicholas
CA Forum: General
I've been working on this report for several hours. Changing formulas, updating the stored procedure, verifying the database... now all the sudden when I try to Save or Save As, I'm getting an error message: "Failed to save document." and that's all it says.
I've closed all preview windows, tried it with and without "Save data with report.", and nothing seems to remedy the problem.
I'll be losing 20 minutes worth of changes if I can't figure this out. Not ideal, but it could be worse. This post is more or less to figure out why this would happen so I can avoid it in the future.
Thanks,
Nicholas

Post Author: Nicholas
CA Forum: General
I've been working on this report for several hours. Changing formulas, updating the stored procedure, verifying the database... now all the sudden when I try to Save or Save As, I'm getting an error message: "Failed to save document." and that's all it says.
I've closed all preview windows, tried it with and without "Save data with report.", and nothing seems to remedy the problem.
I'll be losing 20 minutes worth of changes if I can't figure this out. Not ideal, but it could be worse. This post is more or less to figure out why this would happen so I can avoid it in the future.
Thanks,
Nicholas

Failed to Save Document. and Not Supported. Error Message

Post Author: dscoiho
CA Forum: General
I am using Crystal 10 and SQL Server. I have ran into instances when I try to save a report with data or save as I get Failed to Save Document. and Not Supported. error messages. Does anyone have a clue on why this would be happening and is there a work around.

Post Author: rhartness
CA Forum: General
Has anyone found the answer to this problem? I am experiencing the exact same issue today. This is quite frustrating! If anyone has a clue on how to fix this or how to prevent it from happening again please post a reply.
I'd hate to lose all of my work over the past hour (I couldn't imagine of loosing a days worth of work like the original poster stated) but if there is no fix, I understand. However, is there something that I could have done to cause this? If so, I want to avoid doing it in the future.
Thanks guys.

Keynote - cannot save document

Hi, anybody knows how to solve this problem? I am creating a keynote document with quite a lot of pictures. After the 3-4 slide I could save the document with no problems. I am in the 11th slide now and suddenly, when I tried to save the document it told me: "Couldn't auto-save document"
I've tried to reduce file to no avail.
If anybody has a good suggestion of what the problem is I'd really appreiciate it. I've been working on it for hours and I am afraid if I close Keynote I would loose the document -

I have 21 slides. Latest everything (OS, Keynote etc...). No problems until I added some more pictures and now I get the same message.
Every time I try to save my file, I get "Couldn't auto-save document".
Honestly, this is so pitiful, by a mega rich company that tells us continually that they produce amazing stuff. Yes, Keynote truly is amazing. Powerpoint does not have these amazing problems. What is auto-save doing anyhow? There are no setting for auto-save, nothing in the help files. I am not asking it to auto-save. I just click "save" but uncle Apple knows best, and fails. Sounds like my wife's iPad iOS 8.0.2 in which Pages is really unstable. I guess Apple cannot afford proper testers.....?
I can duplicate the document and it seems to save that new file fine.

I can't save documents in Pages.

I can't save documents in Pages. I get a "file does not exist" error message. I've tried changing the file name, length, and location. To no avail. This is only sporadic.

Hey fruhulda,
I have a similar problem although I'm running OSX 10.9.5. I'v just started to completely remove pages and attempt a reinstall. I did the search for the plist file. There was only one file with the com.apple.iwork.pages name but it did not have the .plist extension, even when I checked the info page. Is this the same file?
I'm not sure I want to update to Yosemite yet, but it looks like I may have to in order to continue to work with my pages documents, unless the reinstall works.

SaveAs Document Failed (80043768)

Similar Messages

Maybe you are looking for