Saved midi sounds not loading logic9

none of my midi sounds i save in a template gets saved. it defaults back to the first sound on my triton. when i click from one midi track to the next it defaults to the first sound. none of my sound are getting loaded.
what am i doing wrong..

So, here's an update to the problem, and to highlight, I decided to start fresh to demonstrate.
Okay, so, I created a new "concert" and only assigned one keyboard (Keyboard 1). The default sound was, of course, Suitcase Bright. When I select different sounds from 01 Pre-Mapped or 02 Software Instruments, everything seems normal. But, when I select different sounds from the 03 Electric Guitar, 04 Vocal, Audio Channel Strips, and Instrument Channel Strips patch libraries, the yellow Keyboard Layer disappears, and no sound plays like I described before.
So, for example, I went to Instrument Channel Strips > 10 Orchestral > 01 Woodwinds > Bassoon Legato. The Keyboard Layer disappears and there's no sound. Here is where the problem is: Upon further inspection(based on your steps), I went to MIDI Input within the Channel Strip and I discovered that it's automatically creating a new keyboard input (Keyboard 2) which I never created and it just doesn't exist in real life. That's why the Keyboard Layers are disappearing and no sound is coming out; it's trying to automatically move it over to a keyboard that's just not there.
Again, this only happens when selecting sounds from within the 03 Electric Guitar, 04 Vocal, Audio Channel Strips, and Instrument Channel Strips patch libraries. When I select a sound from 01 Pre-Mapped or 02 Software Instruments, the Keyboard Layers reappear and everything goes back to normal.
So, I'm not sure how to fix this ...

Similar Messages

MIDI sound not found

I've been trying to connect my Lexicon Alpha desktop recording studio to GarageBand, so that I can use my keyboard. It connects but does not find a signal.
When I go into settings in the top menu under GarageBand and then into Sound/MIDI. Here it says Sound In and Sound Out - Lexsicon Alpha In/Out, but then underneath it says 0 Midi sound going in has been found.
Anyone knows how to make it work?

NicolineSA wrote:
settings in the top menu under GarageBand and then into Sound/MIDI. Here it says Sound In and Sound Out - Lexsicon Alpha In/Out, but then underneath it says 0 Midi sound going in has been found.
Anyone knows how to make it work?
after looking at a couple of pictures, it appears the Alpha is only an audio interface, not a MIDI interface, so you can only record your keyboard's sounds:
http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
(Let the page FULLY load. The link to your answer is at the top of your screen)

Sound not loading

I have the following code:
myVars = new LoadVars();
myVars.load("http://charlesnewmanpubl.com/Sweethearts_On_Parade_BRGK.txt");
myVars.onData = function(src){
     myVars.decode(src)
     //trace(myVars.faFile);
     var faFile:String;
     var sound : Sound;
     if (myVars.faFile == undefined) {
        trace("not yet.");
    } else {
        faFile = myVars.faFile;
        trace(faFile + "!");//so far so good
        this.sound.loadSound("http://charlesnewmanpubl.com/media/"+faFile,true);
        clearInterval(param_interval);
     trace(faFile + "!!");//we're ok here
     this.sound.onLoad = function(success:Boolean) {//this is where it's failing
        trace(faFile + "!!!");//nada
        if (success) {
         this.playing = true
         this.sound.start (this.sound.soundIndex / 1000)
            trace("Sound loaded");//not here
     }else{
         trace("Sound failed");//or here
This is a loadVars of a .txt, one variable of which is the name of a .mp3 file. I test to see if we've gotten all the data from the .txt, and then what the variable "faFile" is. That's then checked twice, both successfully. But when it gets to the section of whether the sound has actually loaded, and then should play, there's no reposrt.
So I'm not loading the .mp3, but don't understand why.

try:
myVars = new LoadVars();
var sound : Sound;
myVars.onData = function(src){
     myVars.decode(src)
     //trace(myVars.faFile);
     var faFile:String;
     if (myVars.faFile == undefined) {
        trace("not yet.");
    } else {
        faFile = myVars.faFile;
        trace(faFile + "!");//so far so good
        sound.loadSound("http://charlesnewmanpubl.com/media/"+faFile,true);
        //clearInterval(param_interval);
     trace(faFile + "!!");//we're ok here
sound.onLoad = function(success:Boolean) {//this is where it's failing
        trace(faFile + "!!!");//nada
        if (success) {
         this.playing = true
         this.sound.start (this.sound.soundIndex / 1000)
            trace("Sound loaded");//not here
     }else{
         trace("Sound failed");//or here
myVars.load("http://charlesnewmanpubl.com/Sweethearts_On_Parade_BRGK.txt");

Sound not loading - https IE

Hi all,
I have made a sound player. It works on all browsers when using http. But when using https it works on all browsers except IE.
My script for loading is pretty basic, much like the one in the reference.
I havn't been able to find a solution. Any ideas?
Thanks,
Jakob

try:
myVars = new LoadVars();
var sound : Sound;
myVars.onData = function(src){
     myVars.decode(src)
     //trace(myVars.faFile);
     var faFile:String;
     if (myVars.faFile == undefined) {
        trace("not yet.");
    } else {
        faFile = myVars.faFile;
        trace(faFile + "!");//so far so good
        sound.loadSound("http://charlesnewmanpubl.com/media/"+faFile,true);
        //clearInterval(param_interval);
     trace(faFile + "!!");//we're ok here
sound.onLoad = function(success:Boolean) {//this is where it's failing
        trace(faFile + "!!!");//nada
        if (success) {
         this.playing = true
         this.sound.start (this.sound.soundIndex / 1000)
            trace("Sound loaded");//not here
     }else{
         trace("Sound failed");//or here
myVars.load("http://charlesnewmanpubl.com/Sweethearts_On_Parade_BRGK.txt");

Saved drafts do not load

When saving drafts, I cannot go back to work on them because they dont load. In addtion to that, I do not have an option to move them or send them only the option of deleting. I really need your help to figure it out since Those drafts are long and very important. Thank you

What sort of drafts? (Mail messages, Pages documents, etc.)

Why are my saved bookmarks randomly not loading on startup even if I have saved them earlier?

Whenever I exit the firefox, I am asked if I want to save the current bookmarks so they will be loaded automatically next time I use the internet. Lately, they haven't been loading automatically even though my laptop is not crashing.

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows. 
You can use "History > Restore Previous Session" to get the previous session at any time. 
You may need to click the orange/gray Firefox button to see History. 
There is also a "Restore Previous Session" button on the default about:home Home page. 
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
Make sure that you do not use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox.
* [[Firefox does not ask to save tabs and windows on exit]]

Saved files will not load Premiere Elements 8

I have a Sony Vaio laptop I purchased in 2011, running Windows 7. Preinstalled on the computer was Premiere Elements 8 so I have been editing a video I recorded using this software, December 31, 2014 was the last time I edited the video until yesterday. Yesterday I booted up my computer, started Adobe Premiere Elements 8, Opened my project, watched as the loading meter went to 100%, the loading meter went off and nothing...I was looking at the Premiere Elements 8 screen with nothing, just a grey background with all my headings at the top like I had not opened a project, I have tried this many times with the same results

Randy_Q
Thanks for the update. Sorry the solution was not found yet.
I do not see an avenue from Adobe for a fresh download since this was a pre-install from a computer manufacturer. You might be able to get the serial number for this pre-install. If this version got registered at Adobe somehow, there might be a listing for it under "My Products" after you sign into Adobe web site (http://www.adobe.com) with your Adobe ID and Password. Type in My Products in the Search field and follow it to your products. If you see Adobe Premiere Elements 8.0 listed, click on that to reveal the serial number.
But still no replacement installation files.
Let us recap
1. Adobe Premiere Elements Prefs file and 8.0 Folder deleted
2. You have been through my check list in post numbered 3.
3. You have done general computer maintenance.
4. Can you get into Elements Organizer 9? If so, please go to Edit Menu/Preferences/AutoAnalzyer Options and disable everything under AutoAnalzyer Options.
Did that impact the issue in anyway?
5. We cannot uninstall reinstall or create a new User Account with Administrative Privileges since we do not have access to installation files and probably serial number.
Are we at a stage when System Restore to about December 31, 2014 becomes an option? Or rolling back the Windows Updates to December 32, 2014?
You have ruled out that the problem exists with or without the antivirus and firewall(s) disabled. Is that correct?
ATR

Saved Monitor Profile Not Loading In Windows XP

I normally use a Mac for PS, but I have Adobe Gamma installed as Control Panel on my Windows XP machine, so I can correct the monitor balance.
After I run the Wizard, I save a new sRGB Color Space Profile.icm in Windows\System32\spool\drivers\color.
But every time I restart Windows, it resets itself, and my monitor balance is off - much too light.
What gives?
How do you get Windows XP to load this profile each time?
Thanks.

check the display settings. your video driver could be overriding adobe gamma with it's own color profile.
start> settings> control panel> display> settings> advanced> color management.

Midi loop not sounding same at arrange area

Hi,
when I drag a midi loops (green loops) into the arrange area it will not play the same sound........ mean I'm not getting the same effect of the midi loop at the arrange area & I don't want use these loop on audio track. I know if I drag the midi loops into audio track it will create an audio loop sounds same effect what I'm listening at the Loop browser but I want to use these midi loops in there own midi track.
Please help me guys

Thanks Jorge for getting back to me.
I tried what you said and when I do get the first Capital Violin 2 midi loop and turn it to green. There is a slight staccato sound but not much. When I move the modulation wheel and select the first sound in the piano roll, yes I can hear a dramatic staccato sound. But the minuet I get the play head to the front of the loop and play it from start it is gone again. Quite frustrating. I would love to get that energetic Capita F Violin 2 midi sound but it doesn't have the power or anything like what it sounds in the loop browser.
Any extra tips on how to KEEP the sound after playback would be a great boost to my musical loop understanding.
But thanks for those suggestions!
I am using a 49 E keyboard and it has a Pitch Bend Wheel and a Modulation Wheel to the left of the keys. The volume control on the 48 e is all the way up. That is another problem I have is even when I push the volume up high in the arrangewindow more often than naught the loops don't seem strong like they do in the loop browser.
But again, my main problem is a lack of strong staccato sound.
Bill
Message was edited by: William Furner1

Midis on newer cards - how do I get them to sound NOT like the Microsoft GS Wavetable SW Syn

I've decided to upgrade my sound card recently from a Sound Blaster PCI 28 to a X-fi Titanium and to my dismay - my midi files sound EXACTLY like the Microsoft GS Wavetable SW Synth. Wheres the option to change the waveset? The 8mb waveset that is offered for the Sound Blaster PCI 28 made the midis sound WAY better. Is there any equivalent option for the X-fi Titanium or am I forced to mp3 all my midis before I upgrade?
I can't believe that the latest creative soundcard doesn't have a better midi synthesizer set to default... ?

Hi Linda. I'm pretty sure the function of the speakers isn't so much connected with iTunes. I'm not sure I understand your question. But that sounds like a good deal on those speakers.
As for the number of songs, Airsculpture has the answer for that. To find the number of albums, do the same thing (View>Show Status Bar) and then click the pill-shaped button near the center top of the window where you can choose to view by songs, albums, artists, etc. The status will change for each.

Flash Pro CC saved fla project - "Could not load scene into memory. Your document may be damaged."

Hi all, I've been working on a project in Flash Professional CC in windows 7 that was started in a previous version of Flash Pro and occasionally after I've saved the project and tried to open it the next day I get the "Could not load scene into memory. Your document may be damaged." message and only a blank Scene 2 in the project. I've previously been reverting back to the old saved project file and starting over. Its wasted a lot of time so far.
I can still open the same exact project in CS6 on another older computer but not in CC. I can also save the fla in CS6, transfer it to the other computer and then it will work again (for now). This isn't going to be an option in the future as CS6 was a trial version that is on its last use today.
I've tried to create a new flash pro cc project and just copied and pasted the library and scene layout from the old project into the new project. This worked for a couple of saves/ opens but the error has happened again. I'm scared that now that I've reached the point in the project were my work in the animation/ visual side will start to be more intensive that I will continuosly have to worry about losing all of my work. I'm using a document class so the AS3 code hasn't been an issue thankfully. Any help would be appreciated.

Thanks for the reply Amy, that is essentially what I am doing already only I'm not using version control software I'm just managing it on my own since its a solo project, though I have been considerring using git anyway. It still doesn't explain why I can open and save the supposedly damaged project (according to CC) in CS6 and only then will it work again in CC. Also I'm not gettting a chance to save as a new version over and over for long. Its only a couple of days max, usually just over one day, and I've primarily been working on the code in Flash Builder with little functional change in the actual fla project. Its primarily changing movieclips instance names, which in this project is tedious and time consuming. Having to revert back to the older working version is exaclty what I'm trying to avoid. I shouldn't have to commit the project to a repository every little change that I make to the fla file.

Saved userid passwords will not load on yahoo after clicking form on sign on page firefox 24

When I go to Yahoo Mail I usually can just click the User ID area and the ID and Password information will load as Firefox has that information already saved. That function has stopped with the update to Firefox 24. The user ID and Password information are still saved in FireFox.
What does happen is that if I go to tools/Options/ Security menu and then close it and then try to load the Yahoo mail and click the form it does the auto complete. If I navigate away from that page and go back the information will not load unless I open the Options menu again.
This update seems to have broken the auto complete function.

Oh... and here is another work around. Click in the Used Id field then Click in the Password field then click the User Id field again. That brings up my Id s.

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

Create a new profile as a test to check if your current profile is causing the problems. 
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem 
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HT1338 When I try to start my Garageband 6.05 I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up? Any suggestions? THanks

When I try to start my Garageband 6.05,I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up? Any suggestions? THanks

I'm just guessing at this point, but I suspect that you have installed a midi driver on your computer for some external device, and, since GarageBand's midi capabilities are limited in some ways, chances are your audio/midi driver is asking GarageBand to do something more than it's made to do, causing core audio's midi function to crash.
If that's the case, you might want to try adjusting your midi device's driver settings, or uninstalling your midi device's driver, and then see if GarageBand starts up normally without it.

Saved midi sounds not loading logic9

Similar Messages

Maybe you are looking for