Saved search issue with custom link

Hi all,
Generally we do have one opportunity search . But according to my requirement I have added one more opportunity search for separate Opportunity type .
I do have 2 different view configurations for regular search/result and newly added custom search/result.
here the issue is with Archived Saved Search( those are saved in regular Opportunity Search) is not working properly when I am open custom Search and then open the saved Search( from Home Page) . Here again I need to open the regular opportunity Search and execute the Saved Search then it is working.
When I come out from custom search/result, then execute the Saved Search it is calling the configuration of Custom Search/result.
here I need to destroy the custom configuration search/result when I come out or execute the saved search . already I tried the WD_DESTROY method in Mainview set level. But it is not working .
Regards.
rama

Solved my self.
Below is the solution. Go to the Viewset implementation class ZL_BT111S_O_MAINVIEWSET_IMPL   and call the default configuration in method DO_CONFIG_DETERMINATION .
CALL METHOD me->set_config_keys
   EXPORTING
     iv_object_type          = '<DEFAULT>'
     iv_object_sub_type      = '<DEFAULT>'
     iv_propagate_2_children = 'X'.
regards,
rama

Similar Messages

Issue with Report Links in OBIEE

I'm facing a issue with report links(modify,printer friendly,refresh etc) in obiee
The reports which are set as "Display Results-->Embedded in Section" for those reports if I put report links(modify,printer friendly,refresh etc),the links do not show up.In the palce of link I can see "-"(minus sign) appearing.
If I change the report to "Display Results--->Show as link in seperate window" the lniks show up fine.
Any idea why this is happening?
Your suggestions are welcome.
Please help
Regards.
Edited by: 810008 on Apr 14, 2011 1:39 AM

Edit Dashboard -> Report Properties -> Report Links... (directly under Display Results) -> Customize
M.

Issue with Dynamic Link with Premiere CC and After Effects

I'm having a strange and annoying issue with Dynamic linked clips in Premiere CC:
When I render or export my timeline the progress will stall when it hits a dynamic linked clip. It will stay stalled until I click the After Effects application and make it the active window. Once that happens the render/export resumes at normal speed.
This is annoying as I can't start a render and walk away or work on different windows, I have to babysit all the renders to make sure they go through.
Has anybody experienced this and know of any solutions?
I'm running the latest version of Premiere (7.2.1) and After Effects 12.2.0.52 on Mavericks 10.9.1 with a GTX 770 Video Card.

Does it still pause if AE is closed completely? I often experience slower AME renders from Premiere over dynamic link material when AE is open. Closing AE speeds things up. Go figure.

Issues with Custom Chart

Hi,
I am facing some issues with custom charts.
1. X Axis value is getting cut off. Given date as x axis parameter and last 2 digits of date is getting cut off. (format like 19-Apr-2011T00:00:00). And this value cut of happening only for custom chart.
2. On right click of the custom chart, when i am selecting Preview, it opens a new pop up window with and error as Error: "Application error occurred during the request processing.". No preview is being generated.
3. In Server Scaling, i checked Use global auto scaling, and many times it is showing improper y axis or mutiple y axis values with the same value or it is displaying improper global range
kindly help
Regards
Muzammil

Muzammil,
Without seeing your data and your chart configuration, it is difficult to understand exactly the issues you are encountering. I have the same JRE and the same version and build of MII as you. I have no difficulty with the scaling or with Global Range, but problems displaying the date in my tests.
I would suggest the you enter a ticket into the SAP Support System, and enclose a copy of your data (run the query, use Browser with Content Type = text/xml) and export a copy of you display template.
Lastly, what type of query are you using - sql, tag?
Kind Regards,
Diana Hoppe

Issues with Custom Settings

Is anyone else having issues with custom settings on 10.8.2?
I am trying to configure basic office 2011 settings based on the keys located at http://afp548.com/mediawiki/index.php/Office_2011_Settings using a device group.
However, when I log into an authenticated user's machine and load pref setter I can see that the customizations are not found on the newly managed machine. I know the push updates are working, but for custom settings I seem to be getting nothing.
My questions:
- Am I just flat our doing it wrong? (meaing, should the plist files be copied over)
- Are there common issues to look out for?
- Can anyone share basic custom settings they have that work?
Thanks!

Thats a bad idea. Office dos not react well to having it's prefences copied from one machine.
Check out: http://www.officeformachelp.com/office/administration/mcx/
It's a good guide for MS Office prefs.

Issue with custom search fields in agent inbox

Hi All,
I am working on CRM agent inbox 7.0. The issue I am facing is like this:
I have added custom search fields in inbox. When give a combination of standard search field and custom search field, the result is only based on standard field. The value of custom field is not considered.
Is this a standard behaviour? Are standard fields given higher priority that custom fields?
Any pointers on this would be highly helpful.
Thanks,
Narendra

Hi Naren,
Did you add custom field using AET? If yes then while adding custom field using AET did you make it search and result relevant?
There is nothing like priority in standard SAP fields and custom fields.
Please let me know so that I can further help you.
Thanks,
Bhushan

Saved search Issue

Hello Experts,
I am facing following issue while searching the already saved search.
When i select any saved search entry and click on GO, then it is displaying me standard Error Message "Entry 'ZZCHP_PERS_RESP' cannot be used: Configuration is missing search criteria"
ZZCHP_PERS_RESP is one of the Search criteria field which i have added.
Following is the Screen shot for the same. It is not displaying any result and hence failing.
The information about the Error message is also captured in the Screen shot. Message is from BSP_WD Message class, Msg Number : 009.
Please help me where it is going wrong.
Thanks and Regards,
Nikhil Kulkarni

Hi,
Issue was solved by redefining the Inbound plug of the view and also with the help of the sap note 1948378. Below are the steps in redefinition of inbound plug(IP_SEARCH and Component name is BT112S_SC.)
1.Call for the super method is commented to avoid the conflict.
2.GET_GOREQUESTED() method of context node always returns abap true when we click on saved search link on work center. Copied the code of standard savedsearch_btn( ) method to the custom method zsavedsearch_btn( ) and commented the call to adjust_search_criteria_values() method (as per the suggestion from the SAP note 1948378).
Below is the snap shot of the codes mentioned in the above 2 points.
Thanks.

Search Issue with OCR Files and Meta data

We have setup SharePoint 2013 on windows 2012 server. It is have cumulative update until August. Its version is 15.0.4535.1000.
I have created two site content type of document type. Both content type have 4 site column which are common in them. Both have two site column separate in each. I configure search service application, which is also working very good and also don't have any
kind of error. I have added this two content type in one document library which have lot of sub-folders
All Files are OCR pdf which is done by meta data
Now the issue is that when I search anything from search center, sometimes I will get result with data from site columns and sometime i will not get data but just link to file and Name of the file. Wired thing is that columns are common and they crawling Full
and Incremental also properly.
Below is the screen for my search where you can see that there is no summary. How can I bring summary
So what can be the issue for this.

Hi,
For metadata, which metadata are you not seeing? Are they custom properties within the PDF, and have you checked if you have crawled properties matching these?
I know there's issue with last modified on PDF's (http://sharepointfieldnotes.blogspot.no/2013/05/understanding-and-getting-sharepoint.html)
Thanks,
Mikael Svenson
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

ADF : af:query saved search issue

hi
Please consider this example application from Andrejus Baranovskis
http://jdevsamples.googlecode.com/files/UserCustomizationsSession.zip
(which he refers to from his blog post "User Customizations for Duration of Session in Oracle ADF 11g")
I see some strange behaviour with a saved search in this scenario:
(a1) open the UserCustomizationsSession.jws file in JDeveloper 11.1.1.1.0 and configure the "Hr" database connection in the Application Resources panel
(a2) right-click the main.jspx page in the ViewController project and click Run
(a3) on the "Index" page click the "Employees" button
(a4) on the "Employees Form" page, without entering any search values, click the "Search" button, which causes (all) the rows to show in the table
(a5) in the "Firstname" search field, enter "a" and click the "Search" button, which causes rows with "a" in their first name to show in the table
(a6) click the "Save..." button
(a7) in the "Create Saved Search" dialog, enter "my-a-search" in the "Name" field and keep the default values for the checkboxes ("Set as Default" checked, "Run Automatically" checked and "Save Results Layout" unchecked) and click "OK", which causes "my-a-search" to show up in the "Saved Search" dropbox
(a8) click the "Close" button
(a9) on the "Index" page click the "Employees" button, which causes the "Employees Form" page to show up with the results of "my-a-search"
(a10) in the "Saved Search" dropbox, select "EmployeesViewCriteria" and click the "Search" button, which seems to cause the table to refresh but still showing what seems to be the result of "my-a-search"
(a11) try to change the value of the "FirstName" search field or use the "Reset" button, each time the result of "my-a-search" shows up
question
(q1) Why don't I get all the rows in step (a10) instead of just "my-a-search"?
many thanks
Jan Vervecken

Hi Jan,
seems related to bug 8817108 - AF:QUERY DOES NOT WORK CORRECTLY WITH MUTIPLE VIEW CRITERIA
I'm copying below an except of the SR with possible workarounds:
The key point in the modified testcase is that we created a method in the
Application Module that resets the View Criteria of the View Object:
    public void unapplyViewCriteria() {
        String[] allVC = getViewObj1().getAllViewCriteriaNames();
        for (String vc: allVC ) {
            System.out.println("Unapply View Criteria: " + vc);
            getViewObj1().removeApplyViewCriteriaName(vc);
    }This method was published as a client interface and added to the bindings of
the Page definition (by a drag&drop from the DataControl palette):
    <methodAction id="unapplyViewCriteria" RequiresUpdateModel="true"
                  Action="invokeMethod" MethodName="unapplyViewCriteria"
                  IsViewObjectMethod="false" DataControl="AppModuleDataControl"
                  InstanceName="AppModuleDataControl.dataProvider"/>This created a button that we updated as the following:
        <af:commandButton
                          text="Go To Other Page AND Unapply View Criteria"
                          disabled="#{!bindings.unapplyViewCriteria.enabled}"
                          id="cb1"
                          actionListener="#{bindings.unapplyViewCriteria.execute}"
                          action="otherpage"/>This button will execute unapplyViewCriteria() and then navigate to the other page.
That's a first solution, where we unset the View Criteria just when navigating.
Another option is to unapply the ViewCriteria when the af:query has completed its query.
This can be done by the method we exposed in the aforementioned Note.
The method processQuery() in the backing bean is:
    public void processQuery(QueryEvent queryEvent) {
         * add your PreQuery code here
         * invoke the real processQuery
        invokeMethodExpression("#{bindings.NameStartsWithMQuery.processQuery}",
                               Object.class, QueryEvent.class, queryEvent);
         * add your PostQuery code here
        // Workaround for Bug 8817108
        BindingContainer bindings = getBindings();
        OperationBinding operationBinding = bindings.getOperationBinding("unapplyViewCriteria");
        Object result = operationBinding.execute();
    }where we first execute the standard processQuery, and then unapply the View Criteria.
If memory serves me well, customer opted for WA 2.
Regards,
Didier.

Adf:Query - Saved Search issue

Hi all,
Using Jdev 11g. R1(Version 11.1.1.7.0) , I am getting the following error on returning to my UI's Advanced Search page after I add a field from 'Add Field" button and save it as a default search.
*"Would you like to save the changes you made to the layout before proceeding?"*
Any suggestion for debugging this issue.
Thanks in advance..

I believe you are encountering a usability issue. When you receive, "Would you like to save the changes you made to the layout before proceeding?", it is question not an error. You added a field and must have changed something in the results table (added a column, reordered column), and it is asking if you want to save the changes to the results layout table with your saved search. I think that may be what is going on here. I am not sure if you can disable this question, but you may be able to change the message itself to be worded differently.

Horrible Issues With Customer Service

I have never in my life received such horrible customer service from a company. I swear that in order to rectify the screw-ups of my order for my move, I had to call the customer service line NO LESS than 10 separate times, if not more, with a total of at least 9 hours on the phone (more likely 12), quite a bit of it on hold, and most often not during peak hours.
I had originally wanted my residential triple play service transferred, but was told I could only cancel instead of transfer. After I was on the phone for an hour discussing the options, I was told that my bill would be $10 less per month than I currently have ($140 instead of $150). I agreed to it, and was sent a receipt stating that I would be paying $175 a month, which was not what I was told, so I had to call in again, speak to another rep for an hour again, so I could get the same rate as I previously had.
Later, I wasn't told that I had to turn all my old equipment in; I thought I would just take it with me. I received an automated email stating I would have to return all equipment otherwise I would be charged for holding onto it. In order to clarify the situation, I had to call in again, and was on hold for ANOTHER hour, and was told nope, had to turn it in, unless I wanted another needlessly complicated situation by the rep. And I was told I HAD to ship it in. I later figured out on my own that I could go to a location to turn in the equipment.
I had originally wanted the service turned on the weekend of June 7, but was told they could not do weekends, so I scheduled for the 9th. I called back later, still over 2 weeks out, changing it to the 6th, but was informed that the original rep had lied to me and said I could do it on the weekend. So I scheduled that. I got a call back later from another rep saying that it could NOT be done on the weekend, so I changed it again to the 6th this time. Again, all these calls were at least a half hour to an hour each.
I found out later that the last customer service rep I spoke with didn't annotate that even though I was cancelling the TRIPLE PLAY package, that the phone was to be cancelled at the same time as the internet and tv. So, one day before I move and the my service is shut down, do I get a call from customer service saying that Whoops! Even though the installation was Friday, and it was currently Thursday evening (the 5th of June), because they had in their notes that the phone cancellation was on Saturday (Again, not what was confirmed with the last rep - they were all to be cancelled together), that they hadn't sent out the package with the required equipment. I was justifiably furious. I asked them to overnight ship it, and they stated they would. That did not happen.
I came home from work on Friday evening at 7pm, and did not see the shipment. I checked the tracking link, and it said it wasn't even shipped. I had to call in yet again to ask the status, only to find *whoops* It hadn't shipped. Thankfully, this was the first rep who actually followed through on what they said to me, and felt terrible about my situation (as I had, at the time, been on the phone for a combined minimum of 6 hours) and he gave me $20 off each month for a year. I felt much better that I was actually taken seriously and that perhaps the issues might be over as soon as I got the equipment.
I finally did get it Monday afternoon and was able to set it up by Wednesday due to some issues with power at the house. After that, I kept having DVR box problems, and was again on the phone for another two hours in 2 days (at midnight, no less!) and it turns out, I had to bring in the DVR to trade it in, because I sure as heckfire was not going to wait another 3 days minimum to get a new one shipped out to me. Once it was replaced, everything seemed fine.
Now, I'm having troubles paying my bill online. Yesterday I spent my entire lunch hour on the phone with a representative who didn't understand my request, and so we went in circles, where he treated me like I was a **bleep**, as if I didn't know how to log in to the site. I just want to pay my bill online, but my username is still linked to my old account and hasn't been transferred to my new account. I prefer paying my bills online, and I am unable to do so, because of the inability of customer service to transfer my old account online to my current one. The representative basically said he'd talk to the web team, but reading between the lines he gave me no guarantee that this would get transferred over. I have never in my life had such a difficult time with a service. I do realize that I have had some compensation for the time that I have had to take out of my life trying to get all of these issues fixed, but, in the end, this much effort on my part for this transition is completely unacceptable.

This has not occurred. I was sent an email this morning stating that my account was fixed, and for my inconvenience I got a free On Demand movie (which I don't care about). I want to pay my bill online, but it's still set up with the old account. If this does not get remedied by today, I will be bringing the entire situation up to the regional president. This is completely unacceptable.

Issue with customer Incoming Payment

Hi Gurus,
I need your help related to an issue with Incoming customer payment. This is the first time I am doing this Incoming payment set-up. I have odne the payment program set-up for outgoing payments. I need to configure the automatic payment program for incoming payments. After the payment run is successfully executed, we need to create and send Idoc's to the bank. This process of payment run and Idoc creation is being used successfully for outgoing payments.
From configuration side, I have created a new payment method and have set it up for incoming payments. I have selected ACH as format and PPD as format supplement. I did the bank set-up and have assigned a partner profile to it. I have assigned a reference key 17 in the SPRO-> Print->Payment media.
The issue is that when I run the payment run for customer open item, the payment run is successful and the item gets cleared but no Idoc's are being generated. I have entered my House bank and account number in the variant as well. I am getting the following error:
Step 001 started (program SAPFPAYM_SCHEDULE, variant &0000000000869
No variants found for format ACH
No Payment Media Created in Format 100
I would really be thankful if you can help me in resolving this issue. I am not sure which step I am missing.
Thanks,
Best Regards,
Shalu

Hi Lakshmipathi,
Yes the Document split has been activated. This issue is the specific one. We have different C&F location. Sales happens accross India. Hence we have created the Business area concept for each location to get the location wise balance sheet. I have also activated the zero balancing for Profit center and also Business area so that i can derive the Location wise Balance sheet.
Now the sales invoice has been processed from C&F Location. Customer deposit the Cheque directly to the Head office Bank and not at the C&F Location bank. I don't want to clear the existing open item because 50% of the cheque gets bounced. So i am booking the incoming payment without clearing the open item.
While processing the incoming payment user is entering the C&F location business area in the customer line item (Credit line item) and Head office business area for the Bank line item as the bank is at the Head office so that we can arrive the Balance sheet.
Now system is not deriving the profit center for the customer line item even though the business area wise zero balance has been activated. Recon account field status group has market as optional for profit center but in F-28 i am not able to get the profit center field (Because it is balance sheet item).
The Document type already been configure for Document split and the Recon account also categorised as Customer inthe doc splitting. I don't have any problem with document split other than this issue.
For this issue anything can be done in the document split??
Regards,
Devendran

Issue with custom fields mapping from CRM to ECC.

Hi all,
I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
But i didnt understand the concept of this custom function module. why is this been used?
Could anyone let me know with an good example on how this has to be acheived.
Points are highly awarded.
Kindly reply me.
Thanks,
Kiran...

Hi,
Here you go,
After you create custom characteristics.
1. Do Assign category.
2. Map contents.
3. Double check your master catalog has the mapped content.
4. Publish master catalog.
As per your message, you are not having any error message during import, which tells me that you are one step to close.
Cheers, Renga

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

Issues with Custom Package in Lightroom 3...please help

I am having issues with the custom package in lightroom 3. I am selecting diferent cell sizes (with different aspect ratios) and placing multiple images in these cells.
On screen everything looks good, but when it actually prints some of these cells are coming out stretched!! For example, the 6x4 cell comes out fine (same aspect ratio as the original capture), but i have 2 x 1.5 inch cell whose image comes out stretched??
The first thing I thought of was the "zoom to fit" option, but this is not present in picture package.
Then I thought it perhaps it was something to do with the my print settins, but cannot find anything there.

I am having the same issue. I used a Matt Kloskowski print grid and when I printed it, or printed to file, some of the images in the 15 that were created in the template were distorted. Some the faces became wider and some narrower. Not just zoomed to fit. On screen it all looks correct. Many others on the forum where the template was posted don't seem to have this issue. I created a template myself just in case that was it but I got the same problem as walenahs. I tried to figure out what he had done but I didn't get it.
I have attached the two images. You can see the distortion in the second image on the top row (too narrow), and on the second row, the second in and second down, black and white (too wide).
Thanks

Saved search issue with custom link

Similar Messages

Maybe you are looking for