Saving Quicktime Conversion

When I export my FCE project to Quicktime Movie using Quicktime conversion, the minutes to complete keep going up minute by minute to 2 hours and the percentage of time to complete stays at 9%. I let it go all night, midnight to 6:12 am. I woke up and for a moment saw the window still showing two hours to go and 9%. However that went away and saved the movie. When I opened it to burn it in IDVD, only 109 minutes of the 145 minute project appeared and I was unable to burn it because IDVD says it was too big to load.
So the first question: Why do I have the issue with exporting?
Number: Why does only 109 minutes show up when the project is 145 min?
I assume the issues are related.
Oh, I almost forgot. I saw red render bars throughout the project when I tried to export. I rendered everything three times. Yet the bars still appear in the ruler portion of the timeline after clicking export to quicktime.
Thank you in advance.

If your end destination is a DVD-Video (via iDVD) then you're exporting incorrectly. In FCE, go to File-Export->QuickTime Movie (NOT "Using QuickTime Conversion).
In the export window, you can choose to make the movie self-contained or a reference movie, but DO NOT check the box to Recompress All Frames.
The resulting file will be an exact copy of your FCE Timeline that you can use in iDVD.
-DH

Similar Messages

Saving Settings for use with Export using Quicktime Conversion

Dear All,
Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
All the best, Sean

Well, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry

Crashes on quicktime conversion

hey
strange this is happening to so many people (i saw a post like 3 threads down about the same thing)
i have an 18 minute video that i need to export...it is in the AIC HDV 1080i60 codec and everything went great when i export to a quicktime movie....
but i use quicktime conversion though and try to export and it crashes like 70% of the way through...
weird thing though is that is exports just fine to iPhone format (that is the only other one i've tried)
here are the technical details and what i've tried:
iMac (less than year old)
2gig ram
trying to save to a 1Tb external firewire with 400gig free (also tried saving to OS disk with 350gig free space)
i have trashed preferences and tried to export as quicktime also.....doesn't work
last weird thing is that i exported two seperate versions of it (different bitrates) just two days ago....came back and tried exporting again but it's a no go
any ideas?
why is this issue affecting so many people
Thanks
~Will-i-am~

hey
got a little more information...
i took the finished movie (the project exports fine as a straight quicktime movie) to a Mac Pro that my university has. I tried exporting it with the quicktime on the Mac Pro (from the exported HD quicktime file) and it failed again...
so does this narrow it down to something wrong with the movie itself or it's "assests"
i appreciate any help
Thanks
~Will-i-am

Save QuickTime Conversion Preset

Hello. I am tired of exporting using quicktime conversion and having to change the options, filters, size, and more very time I export for a company. I make these videos a lot and I want to make it so, instead of having to change all the options every time, I want to have a preset saved in the drop down menu (for quicktime conversion) that I can choose and it will do all the options each time. Is this possible? Thanks for any help!

I haven't really tried Compressor before
Time has come
And you have only to gain from using it. Read the small manual for starters.
Or gather useful info from sites like [kenstone.net|http://www.kenstone.net/fcphomepage/fcp_homepageindex.html]
(scroll down in the list to find Compressor related articles)
In FCP QT conversion window > Use> you have the option of choosing/keeping the "most recent settings".

Aspect ratio problem with Quicktime Conversion from FCE HD 3.5

I have a FCE 3.5 HDV project (16:9 aspect ratio) which I am trying to export using Quicktime Conversion for eventual web-streaming. I have tried various settings including "maintain aspect ratio" and the "letterbox" options. After every multi-hour attempt, the end result is just what I need, except the aspect ratio is always 4:3 and vertically squeezed.
What settings should I use for a small to medium sized version of my movie for streaming on a website, but in the correct aspect ratio? I'd prefer a 16:9 Quicktime frame, or at least a 4:3 Quicktime frame with black bars.

I too have been having some problems, same software. Export to iPod completely ignores the intended aspect ratio and is non-adjustable and squeezes the footage. It looks fine on the canvas but gets messed up on export. A 4:3 video that should be 640x480 ends up being 640x426, and a 16:9 video that should be 640x360 looks to be getting 640x426 as well.
Currently, my work-around is to export to DV file, then export to iPod. Being a double encoding, it is quite wasteful in terms of time and processing power. Is there something else I can do?

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

Quicktime movie or Quicktime conversion?

I shoot a wedding, everything is edited using final cut pro 7, I want avoid using compressor, Should I use Qucik time movie or should I use Quicktime conversion,,, I want to burn on a DVD, video was shoot at 1080p 3ofps... Please help

Sorry, if you want to make a DVD, Compressor is your best bet. I mean, you CAN skip it, and take the export directly into DVD Studio Pro to author the DVD...but Compressor will do a much better job.
Anyway...here's a down and dirty way to author a DVD:
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it amd select the top option "first play".
5. Now drag your QT from the broswer and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Quicktime conversion in FCE 4

Hi, am uploading 5 mins of film to a website, so from FCE 4 use quicktime conversion to compress and prepare. 2 queries if anyone has advice. I understand that Sorenson video 3 is a good codec to compress, and thought it was a standard option. It doesn't appear in the drop down list. Should it? And if not, is it the best anyway? Secondly I have prepared this file using MPEG-4 codec, medium quality slider, size 480 by 360, key fps 25, key frame rate 250, audio on mono - first time it looked good. Then I decided to tinker with the settings and have NEVER been able to achieve the same quality, even by going back to the original settings. It's unfocused, choppy (like there a key frame problem or quality slider needs moving), and the file is half the size. Can't work out what has changed, or whether it's the machine. Any ideas?

Try exporting to a H.264 .mov file.

FCE Crashes on Export Quicktime conversion

Have captured and edited DV PAL. All goes well until Export-Using Quicktime Conversion. Software shuts down. All data lost from project. Anyone any ideas?
Running FCE 4.0.1 in Leopard on an intel macbook with 2ghz of ram.

Exactly what QT Conversion settings are you using?
Just in case there is a problem with FCE, delete the user preference files as described here:-
http://support.apple.com/kb/TA24195?viewlocale=enUS&locale=enUS
Note that you will have to reset your Easy Setup and any special preferences you may have configured.
Message was edited by: Ian R. Brown

Quicktime conversion taking too long

this is my first time using final cut pro.
for my class, i've created a video that is 7 minutes long using mpeg-4 clips with AAC audio. they're pretty small clips, 320X240, and fully rendered.
we're supposed to present our projects next week to the class and so today i tried exporting the video i created using Quicktime conversion, but the status bar told me it would take 40 minutes to fully convert, and it only kept going up from there.
what am i doing wrong? under movie settings window that pops up, i clicked on default settings, but changed compression to h.264 (cus everywhere i've read has said it's faster), changed the dimensions to match 320X340, and changed the audio format to AAC with a 128 bit rate.
is this correct? i know i probably shouldn't have used mpeg-4 files to edit, but i hadn't known that until i read it here, today. i've also read that since i'm using mpeg-4 files, i shouldn't have tried exporting it as a h.264 file. is that true? could that have been the reason why the conversion was taking so long?
your help/advice is very much appreciated.
Message was edited by: ec84
Message was edited by: ec84

let's put it this way. if you do File>Export>Quicktime you'll make a quicktime file with the same compressor as your sequence and it'll render faster. If you select File>Export>Quicktime Conversion you can make a quicktime file with a compression of your choice. (although the conversion process takes time). so you could compress it into a DVCPRO 50 quicktime, or an uncompressed quickime or H.264 quicktime. any of these settings will play in quicktime. These you can select through the options button in the converter window. we just suggest you use Export>Quicktime because it's faster easier and it's useless in your situation to convert.

Creating Chapters using quicktime conversion for iDVD?

I'm gonna make this as simple as possible.
Please do me a favour and read this first: http://support.apple.com/kb/TS1611
So I cant export as 'Quicktime Movie', instead follow the instructions and export using 'Quicktime Conversion' Ok thats fine but..........
WHAT ABOUT THE CHAPTER MARKERS?!!!!!!!!!!!!!!!!!!!!!!!! SOMEONE HELP ME!!!!!!!!!
.........thanks

https://discussions.apple.com/message/9408556#9408556
Al

DO ANY OF THE QUICKTIME CONVERSION SETTING ALLOW FOR WEB FRIENDLY HD

i have a 3 minute movie....i want to make it sendable via the internet....it is current HD with 1440 x 1081 aspect ratio.
It seems to me the Export - Using QuickTime Conversion option would be a great solution....however every setting i choose renders beautiful small file sized QuickTime movies with one major problem....THE ASPECT RATIO IS 4 X 3 AND I DON'T KNOW HOW TO EITHER CHANGE IT OR WHICH SETTING I SHOULD CHOOSE INSTEAD?
These are some of the settings i've tried: h263, h 261, h262 and so on.... each one has is unique problems either cropping the image or squishing letterbox into 4x3 aspect ration
Can someone please help me? Thank you Thank you thank you!!!

YOu need to choose a 16:9 resolution RATIO...meaning smaller size, but a 16:9 frame.
640x360...for example.
Shane

Instead of Compressor went Quicktime conversion (still problems)

Hi,
Thanx for all the suggestions regarding compressor. I didn't even consider doing Quicktime conversion for my DVDSP2. I did this last night with a two pass knowing it would take along time. After about 9 hours with some 18 to go ( the piece is 78 minutes) I got two errors, one from my system and one from FCP. FCP simply said "Out of memory". And what I'm assuming was from my system with the yellow triangle and exclamation point. "Your startup disk is nearly full. You need to delete some files."
What I don't understand about these is that I had "video" as my destination. This is a drive within my firewire drive that I had earmarked for just video and it has 23GB of memory in it which should be enough for this piece. Am I wrong?
I know that the other internal drive that I have just for graphics such as video does have a lot on it. A 200GB drive, it only has about 5GB left of memory. Can anyone enlighten me or point me to some articles.
Thank you in advance,
John

Your system drive functions as a virtual memory device. When the software you are running requires more memory that the physical ram you have, the hard disk pages in and out of RAM as needed. Since your spec doesn't mention ram below, I don't know how much you have, but once it filled, overflow started to fill up your system drive. If that becomes full, the system itself could shut down.
You can think of the disk as a pantry and shelf space and RAM as the kitchen table and counter top. When you run out of space for food preparation, you can put stuff back in the pantry or put partially prepared recipes on shelves for later completion.
And please don't call disk space MEMORY - it is not memory. Memory is RAM. Disk space is storage. Also, I should mention that the efficiency of your hard drive drops off SIGNIFICANTLY once it gets over 90% full.
make sense?
Patrick

Export using quicktime conversion only exports 23 seconds of my project...

Hi,
I am trying to output a promotional video to .wmv format using the quicktime conversion. It only exports 23 seconds of footage before stopping, which is no use at all.
Whats wrong?
I have tried setting ins and outs around the video, and I have tried selecting all the content in the timeline, but nothing seems to help.
Thanks.

DOC EDITOR wrote:
Thank you, very much. The cost of the flip version needed is only $49 so that is not bad, but why would you actually need something extra when the conversion option is available in Final Cut? I would understand if the option did not exist at all and the flip 4 mac would make the option available.
Not on mine. I had to buy a third party product to do that.
AFAIK, the ability to be exporting to wmv is not included with FCS or Compressor or QT. If it appears in your options, you may have installed another app that includes the transcoders and codecs.
Microsoft and Apple do not cooperate in the format wars, neither will support the other and there's money involved. It's a shame becuase Flash is whacking both of them stupid and Silverlight is even kinda cool. QT's days are probably numbered.
bogiesan

Saving Quicktime Conversion

Similar Messages

Maybe you are looking for