Saving Settings for use with Export using Quicktime Conversion

Dear All,
Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
All the best, Sean

Well, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry

Similar Messages

Difference between Export as Quicktime and Export as Quicktime Conversion

If the desired end result is a Quicktime file, compressed with the default h.264 "for broadband" preset, should there be any difference between:
1) exporting a sequence with "Export as Quicktime", then opening up that file in Quicktime Pro and compressing it with the preset.
or
2) exporting the sequence with "Export as Quicktime conversion" with the preset.
I had expected these to be equivalent, but I've found that method #2 gives me dramatically sharper text in titles. Can anyone explain why? I'm using FCE 4.

Well I reckon it's because you are crunching numbers twice, in #2 it's once.
Despite digital transfers being said to Lossless, I call it Lessloss.
Al

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

Audio Does not export with ideo in quicktime conversion

I know i did something with a keyboard shortcut during the editing process, but i cant figure out what i did and how to change it back. What my issue is that when i try to export it to any format in quicktime (in quicktime conversion) the video is ok, but my audio does not export at all.
I dont know what went wrong but i should note i pressed something on my timeline that i didnt realize what it did. Its hard to explain what it looks like, when you press on different clips all the clips on my time line quickly turn a more silver/light color and then change back to the normal color(not effecting the video quality just the thumbnails). But it is has a weird color
is there a way i can reset all settings without adjusting my video clips?
Sound settings
Format: Lubear OCM
Channels: Stereo (L R)
Rate: 48.0000 hHz
Render Settings:
Quality: Normal
Linear PCM Settings:
Sample Size: 16 bits
Checked: Little Endian

Hi(Bonjour)!
Does the audio play when you run sequence?
Did you toggle off the monitor icon at the left side of timeline for audio track?
When export to quicktime conversion, select quicktime movie and click OPTION.
From this point, you should see a checkbox for SOUND. Be sure to check it ON.
Michel Boissonneault

Could you guide settings for GWI with MS Outlook for CRM 7.0 .

Dear Experts,
Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
2. How to set up (configure) in crm 7.0 and MS out look.
3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
4. Can we get masterdata like Accounts and Products in MS Out look tool?
5. How we can map activity from MS out look to CRM?
Regards,
Jemmi.

Hello Jemmi,
a lot of questions
Here some answers:
1. You do not have to install the add-on to CRM. It is a add-on to outlook. Just start the setup.exe you downloaded from the marketplace and select MS-Outlook and your language.
2. In CRM70 customizing search for "client profile" - here you will be able to customize for different businessroles different GWI settings. The settings will be synchronised to the client. You will not need to do settings on the client.
3. Biderectional is theoretically possible. We only use CRM to Outlook. If you do it the other way round you have to think about obligatory fields in CRM and where do you get the account ID from and and and. CRM to Outlook is simple.
4. Accounts and Products i guess no in standard. But contact persons is possible, appointsments and tasks are also possible.
5. No answer, we do not use this.
I hope this helps.
Good luck.
Kind regards
Manfred

Fedex can only be used with dreamweaver using metric, not pounds (lbs)

Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
This as per their tier 2 tech suport.
They say I should just convert to metric, no joke!
Any ideas would be greatly appreaciated?
Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
Their note to me:
Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
              Silviu Ghimposanu (Adobe Business Catalyst Support)
              Apr 14 15:23
    Thanks for contacting us Michael
Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
He have added this to our internal bug tracker to be fixed for one of the future releases.
    I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
dimensions in pounds and not in KG
    Sorry for this inconvenience!
Kind regards,

If you're in US it will be in pounds. If your site is set any other country
in the rest of the world it will be metric. So BC or as you call it
Dreamweaver will look at the site country, which you set when creating the
site

Settings for PHP5 With Apache 2 and SAPRFC in WIndows

Hi,
Can anyone give me the exact version of software that needed for the settings for PHP5 with Apache 2 and SAPRFC in Windows.Thank you

If it's just a test/dev environment you need you can try "<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn?rid=/library/uuid/e50bd86e-0a01-0010-53bd-857585234a6a">scripting in a Box</a>" it also lists the versions and pieces needed for the setup you are looking for.

Could you guide the settings for GWI with MS Outlook for CRM 7.0 .

Dear Experts,
Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
2. How to set up (configure) in crm 7.0 and MS out look.
3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
4. Can we get masterdata like Accounts and Products in MS Out look tool?
5. How we can map activity from MS out look to CRM?
Regards,
Jemmi.

Please see my answer to your identical threat in forum Webclient UI.
Please open your questions only in one forum.
Kind regards
Manfred

How do I Ensure that your MOV/MP4 video is exported through QuickTime conversion?

I have a YouTube channel. I use Sony Vegas to render my mp4 projects, but my PC uses QuickTime & I'm VERY unfamiliar with it and/or how it works, how to access it. When I record a mp4 video, QuickTime needs to be involved, but I'm unsure how to even check or know where to go, to find out how to do that. I need ensure my mp4 video is exported through QuickTime conversion. I have no idea what it even means? Does anyone out there happen to have the knowledge I would need to check if in fact the video is being exported through QuickTime conversion? If so, I WOULD FOREVER BE IN DEBT TO YOU! I hope someone can help me figure this problem out. Thanks for taking the time to view my question, and if anyone does know, I'd greatly accept your advice! Thank you very much again!

Hello,
You can do this: Set up a slow pulse train for CTR0 (1Hz). Set up a continuous digital channel read for Port 0 Line 0 on your card. Hook up CTR0 output (pin 5) to P0.0 (pin 10). Start your program to do the counter output pulse train and continuous read. You should see your digital line transition from high to low over time. The examples you can use to set this up are Gen Dig Pulse Train-Continuous.vi and Cont Read Dig Chan-Int Clk.vi. For Cont Read Dig Chan-Int Clk.vi, remove the DAQmx Timing VI to make it software timed, and connect the task handle and error wires accordingly. They can be ran from separate VI's as they don't use the same resources.
To be exact on the verbage used, you can perform a self-test on the device by right clicking the device in Measurement and Automation Explorer (MAX) and select Self-Test. As for testing the device manually, go with what I described above.
Kyle A.
National Instruments
High Speed Digital I/O Product Support Engineer - R&D

What Encoder Settings Does "Share with Facebook" Use?

With iMovie '11 you can Share/Facebook, which will upload the current project to a Facebook personal page. The problem is, I need to upload the movie to a group page that I administer. Yes, this has been asked before, and the answer was "Export to a local drive/desktop and upload to your Facebook group." Got it.
BUT... USING WHAT ENCODER SETTINGS? When you upload directly to Facebook, it's a "black box"--all you can choose is resolution. The video is beautiful when it's finished uploading. But, I HAVE NO IDEA what those encoder settings are and I've tried about every other combination of MP4/H.264 and the video looks typically like dog excrement--never as good as when I upload with the Facebook option.
What encoder settings does the Facebook option use???
- George -

If you want to replicate the black box, use SHARE/EXPORT MOVIE...
You can also use SHARE/MEDIA BROWSER. YOu will find the resulting movie buried in the project package.
If you want to roll your own...
SHARE/EXPORT TO QUICKTIME
QuickTime Movie
h.264 as video codec.
AAC or uncompressed as audio codec.
Set keyframes to automatic (or 24).
Set bitrate to 16,000 kbps, but you can back off from there. You may go as low as 8,000 but you would have to experiment.
It is difficult to get better quality than the default settings, but some people are able to get similar quality at a reduced file size. With YouTube and FaceBook, you should not care about file size. I would err on the side of quality, because FaceBook and YouTube may recompress in their proprietary format, and you want to give them as much to work with as possible.
If you want more detail, here is an article from YouTube on how to optimize settings. The same should work fine for FaceBook.
http://support.google.com/youtube/bin/static.py?hl=en&page=guide.cs&guide=172858 5&topic=1728570

Import/export codecs/settings for FCE with HMC40 footage?(lengthy post)

Hi all,
I am pretty new to video editing in FCE, and brand new to 'tapeless workflow' (just bought a Panasonic HMC40)
so am not sure of all the technical protocol yet.
What is AVCHD as opposed to DV or HDV?
What is meant by 'transcoded'?
For the following series of questions, my final usage will be for the web, flash video (.flv file as converted in Adobe Media Converter from the quicktime file exported from FCE, unless there is a method to export directly to a flash video file from FCE i.e. what is the FLC format?) streaming from my server and played with a flash player (.swf file)
Obviously, I would like to achieve the best quality possible while still maintaining a fast streaming time
here is an example of the above: Road Runner Akron Marathon
I see that if I go to menu-->final cut express-->easy setup I get a window with default import settings as in figure 1 below
figure 1
Which import format is best for footage from the HMC40, shooting at 108024p? 108030p? see figure 2 below
figure 2
Which import frame rate is best for footage from the HMC40, shooting at 108024p? 108030p? see figure 3 below
(don't understand the odd frame rate choices of 25 and 29.97)
figure 3
The default import codec is DV-NTSC as seen in the popup menu in figure 4 below
figure 4
which of the above import codecs would you recommend for footage from the HMC40 if I am shooting in 108024p? 108030p?
I am using the 'log and import' option for importing footage directly into projects from the SDHC card.
Does the check box option under the 'import settings' tab mean that audio/video will be compressed
with the import codec specified during 'import setup'? see figure 5 below
figure 5
When exporting from FCE with quicktime conversion, is it best to use
the same type of codec as the import codec? see fig 6 below
figure 6
Thanks very much for any advice. Much appreciated.
Best,
Dennis
Dennis Roliff Photography

Wow! A huge amount of questions, almost all of which are available using search engines. The forum isn't really designed to give you a detailed instruction on digital video or on basics of how to use the application.
AVCHD is a highly compressed MPEG-4 based HD format. DV is a standard definition format. HDV is an MPEG-2 based HD format.
FCE does not encode Flash. You need third party software.
24p is not supported in FCE.
If you're shooting HD you should select HD.
25fps is for PAL based formats. 29.97fps is for North American based video standard. 24fps is a film frame rate. Most video cameras do not shoot 24fps, but 24fps recorded at 29.97 with pulldown. If your camera shoots true 24fps, it is not supported in FCE.
What you select depends on exactly what you shot. Read the camera manual carefully for the different options of frame size. Native 24p is not supported in FCE. 30p can be ingested using a 1080i60 preset.
How you export depends of where you're trying to get to. If you're going to third party encoding software you should export to QuickTime Movie.

Settings for Purchase Order output using services for MM-SUS scenario?

Dear Gurus,
I am configuring the service procurement classic and plan driven procurement for MM-SUS
environment. We are on SAP SRM 7.01/ECC 6 EHP5.
I need to maintain the below settings for PO output:
1. RUN transaction SWETYPV
2. IN the object types field, enter CL_SE_PUR_WF_OUT.
3. In the event field, enter CREATED.
4. In the receiver type field, enter WS53800008.
5. In the receiver function module field, enter SWW_WI_CREATE_VIA_EVENT_IBF.
6. Select the 'Linkage Activated' checkbox.
7. Save your entries.
Similarly, one more entry for the event CHANGED.
However, the system is not allowing me to save the settings.
If I choose BOR Object Type 'CL_SE_PUR_WF_OUT', it gives an error message 'Object type CL_SE_PUR_WF_OUT is not defined'.
If I choose object category 'Business class for object type CL_SE_PUR_WF_OUT, it gives an error message 'Class CL_SE_PUR_WF_OUT is not a business class.'
There are similar entries in the table SWETYPV for object type CL_SE_PUR_PO_WF_OUT' with object category CL.If we copy the entries and tries to replace the
object type 'CL_SE_PUR_PO_WF_OUT' with CL_SE_PUR_WF_OUT and save it, it gives an error message 'CL is not used for workflow event'.
Could you please help me on how to configure the settings for PO output from ECC system using services?
Any input is highly appreciated.
Thanks and regards,
Ranjan

Hi Ranjan,
Please add the value 'CL' in the table SWF_CATIDS
Then it will work.
With Regards,
Malay

Which Mobile Model is Suitable for Communicate with PC using Bluetooth Tech

Hi ,
I am new in J2ME , now i am try to communicate mobile with PC using bluetooth technology,
now i want some suggestion from any one. which mobile is suitable to my project, I am expect nokia mobile,
so please tell me which nokia mobile have all the facilities to communicate to PC using bluetooth, and what periperals are required to my PC. This is very urgent to me .
Please help me , Thanks in Advance,
With Regards,
Ganesh Kumar.L

What printer are you using?
How are you connecting it to the computer?
HP designed a quick and easy tool that diagnoses and resolves many printing, scanning, and connectivity problems: The HP Print and Scan Doctor. HP recommends that you download and install the Print and Scan Doctor any time you need to troubleshoot a problem with your HP printer from the link below.
Let me know what errors you receive?
http://goo.gl/3DAkq
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to block the Form Settings for Main Menu to use ONLY "My Menu"?

Hi everyone:
Our customer wants to define an User Menu (My Menu) for each B1 user within the company and restrict the Modules at main menuu2026
How can I block the Form Settings for the Main Menu?... It is possible to give an user Only access to My Menu and denied Authorization to the Modules?.
I appreciate your help!!. Thanks very much
Claudia Gutiérrez

Hi,
'My Menu' refers to the third tab on the Main Menu, and the
authorization of 'Organize My Menu' works as below:
- Full Authorization: Allows the user to access the Organize User Menu
window (Tools -> User Menu -> Organize) and customize the menu.
- No Authorization: The user cannot open this window.
Check the Note [1062635|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1062635] if you are looking for it.
Regards,
Jitin
SAP Business One Forum Team

I have lost the correct proxy settings for the ethernet connection using Safari. How do I get back to the original ethernet proxy settings?

I changed the ethernet proxy settings for Safari on my Mac Pro, when I was in a particular place that required extra security. Now I cannot get the ethernet connection to work when back home. The wireless connection works fine. What are the original ethernet proxy settings. How do I make the changes?
Thanks

From your Safari menu bar click Safari / Preferences then select the Advanced tab. Click Change Settings next to Proxies. Select Automatically from the Configure pop up menu.
You may also have to select the Proxies tab. If any of the boxes are selected, deselect then click OK.

Saving Settings for use with Export using Quicktime Conversion

Similar Messages

Maybe you are looking for